i've had troubles for a long time with official roms
my problem is that i have error 328 . i searched all over the internet for a solution but i couldnt find even in the wiki i read this passage
"ERROR [320-328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occurs, it usually is not recoverable and the device needs to be sent back to the customer service center. In this case, you have to flash a new ROM code. You can retry the RUU to see if it recovers."
so my question is what is that which they can do in the customer service and we cant ???
com'on we have to do something about it
ERROR 320-328 mean "Incorect User. Replace User and try again!"
Sorry, just joking. I can't help You.
Hi all,
First off, you were guys were great help the previous questions I may have asked earlier. Thanks for that
Unfortunately, I came upon another problem. Specifically with Microsoft Voice Command 1.6 on my Xperia X1a.
I was able to install this through Active Sync a few months ago. Haven't used the application in a while, but it was working then.
However, when I try to ask it to play a media file, Voice Command responds with something like... "Error: The file 'Voice Command' cannot be opened. Either it is not signed with a trusted certification or one of its components cannot be found. Please re-install..." etc.
Though, when I try to uninstall and reinstall, Voice Command goes "An unrecoverable error occured in Setup. Reset the device and try again."
I'm assuming I would have to do something with the Registry files to clear this matter up?
Any help would be great! I'm totally stuck, cant unistall, cant reinstall :/
MAJOR UPDATE: The following error now applies to all known applications. ;____; PLEASE HELP
^^EDIT: I ended-up degrading my firmware. All problems thus solved. Sorry about this misfortunate post.
Protip: If all means the world is gonna end when your phone malfunctions, take a shot a firmware degrade / upgrade :]
Has anybody been able to flash a Lumia 925? I've read four different tutorials for Lumia flashing, none of them agreeing in the sequence of buttons pressing; and with each of the tutorials I always end up with some error message, either "wrong signal from the device", or "no signal from the device". The only log I get from the flashing software (Nokia Care Suit) is "recovery failed". I'm using Product Support Tool 2013.49.3.30, supposedly supporting Lumia 925.
Someone else? Some success flashing this phone?
zogoibi said:
Has anybody been able to flash a Lumia 925? I've read four different tutorials for Lumia flashing, none of them agreeing in the sequence of buttons pressing; and with each of the tutorials I always end up with some error message, either "wrong signal from the device", or "no signal from the device". The only log I get from the flashing software (Nokia Care Suit) is "recovery failed". I'm using Product Support Tool 2013.49.3.30, supposedly supporting Lumia 925.
Someone else? Some success flashing this phone?
Click to expand...
Click to collapse
You can make a screenshot of error?
Which button you press for pass your Nokia Lumia 925 "in flashing mode"?
Hi. Thanks for your reply. Well, I finally got past that problem with a brand new installation of NCS in a brand new system. But now I'm getting stuck after the "You have chosen not assigned product code for this device. Do you wish to continue?" dialog box. I click "Ok" there, and then I get another popup with this error message:
Could not load file or assembly 'Nokia.Murzim.Uefi.FlashApp.Core.dll' or one of its dependencies. The specified module could not be found.
Exception:
System.IO.FileNotFoundException: Could not load file or assembly 'Nokia.Murzim.Uefi.FlashApp.Core.dll' or one of its dependencies. The specified module could not be found.
File name: 'Nokia.Murzim.Uefi.FlashApp.Core.dll'
at Nokia.Murzim.Uefi.FlashApp.CoreProgrammerAdaptation.ProgrammerAdaptation.UnsubscribeEvents()
at Nokia.Murzim.Uefi.FlashApp.MurzimFlashApp.Release(Boolean release)
at Nokia.Murzim.Uefi.FlashApp.MurzimFlashApp.Release()
at Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
at Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__b(Object state)
I don't understand a word of that puzzle. Any idea of what might be going wrong? Seems like I'm missing some module, or perhaps some driver? But I get my phone recognized by the NCS software.
By the way, I've been mostly following your tutorial. With the brand new installation of software, getting to the flash mode (it shows "NOKIA" in the upper half of the screen) wasn't difficult: just press power + vol_down, then clic "retry". But, as I say, I can't get past the aforementioned error. I've tried removing and reinstalling NCS, to no avail. I'm on Windows 8, if it's of any use.
Did you resolve this?
galapogos01 said:
Did you resolve this?
Click to expand...
Click to collapse
Easy way to flash Lumia (and other Nokia series):
http://www.nokia.com/us-en/support/software-recovery/
NCS software you use only when you need to flash firmware with different product code and people must follow this instructions: http://forum.xda-developers.com/showthread.php?t=2515453
dxdy said:
Easy way to flash Lumia (and other Nokia series):
http://www.nokia.com/us-en/support/software-recovery/
NCS software you use only when you need to flash firmware with different product code and people must follow this instructions: http://forum.xda-developers.com/showthread.php?t=2515453
Click to expand...
Click to collapse
Thanks. I'm trying to change the product code and got the above error with multiple versions of NCS on both Win7 x64 and Win8.1 x64.
Cheers,
Jason
galapogos01 said:
Thanks. I'm trying to change the product code and got the above error with multiple versions of NCS on both Win7 x64 and Win8.1 x64.
Cheers,
Jason
Click to expand...
Click to collapse
Data Package Manager not working? then you must pay 3€ donation to Navifirm+
galapogos01 said:
Did you resolve this?
Click to expand...
Click to collapse
No, I never managed. I gave up long ago. Too much hassle. WP8 is too restrictive and I realized there was no point in wasting time with it. Best of lucks to you!
Well, after I tried about 45 versions of NCS, I uninstalled the drivers for the phone device in Device Manager, rebooted, tried again and it worked. The WP8 experiment continues!
that is driver problem, so NCS can't read your phone, delete/ uninstall all driver about your Lumia and reconnect them
Hi,
As my previous Q give me the answer that I cannot flash rm914 into a rm915 Nokia Lumia 520 from AT&T I'm trying to flash a rm915 rom, AU Country Versión.
But now I have a problem with NCS, it recognize the phone, I can enter into test mode, so I suppose that the conection is OK. But when I start flashing, NCS says rebooting and after a few seconds I get a error message saying "Invalid response from device, incorrect message id"
If I go to NCS error log I can see the same error "Nokia.Murzim.InvalidResponseException: Invalid response from device, incorrect message id"
I check here in XDA and in other sites but I don't find a solution.
Could anyone give me some help please?
Thanks
Iker.
go to device manager, delete or uninstall your Lumia driver, reconnect your Lumia and reinstall new driver
I keep getting error saying that there was an error while communicating with Windows Dev Center every time I try to register my phone, and my time is correct on both phone and PC.
Can someone help me or tell me what am I doing wrong here
Thanks in advance.
Edit: error code is 0x64 if that helps.