[Q] Can't boot into system, is it bricked? - Moto X Q&A

My moto x is XT1052 retail version, and I was regret to update to 4.4.4, so I flashed 4.4.2 version, but I stucked at partition so I stopped and find ways to back to 4.4.4, but I can't find a 4.4.4 asia retail version image for me to restore my phone via fastboot command, do anyone have the EU or Asia retail image of 4.4.4 of XT1052? I really need help!! Thank you soooo much!!!

rommanager said:
My moto x is XT1052 retail version, and I was regret to update to 4.4.4, so I flashed 4.4.2 version, but I stucked at partition so I stopped and find ways to back to 4.4.4, but I can't find a 4.4.4 asia retail version image for me to restore my phone via fastboot command, do anyone have the EU or Asia retail image of 4.4.4 of XT1052? I really need help!! Thank you soooo much!!!
Click to expand...
Click to collapse
what do u mean Asia??
where u get the phone??
if is its retail XT1052 is the european one.
flash recovery img from 4.4.2 EU then reboot the bootloader and flash again ALL the firmware.

danger2u said:
what do u mean Asia??
where u get the phone??
if is its retail XT1052 is the european one.
flash recovery img from 4.4.2 EU then reboot the bootloader and flash again ALL the firmware.
Click to expand...
Click to collapse
Actually, there IS an "AsiaRetail" variant of the XT1052 as well.
rommanager said:
My moto x is XT1052 retail version, and I was regret to update to 4.4.4, so I flashed 4.4.2 version, but I stucked at partition so I stopped and find ways to back to 4.4.4, but I can't find a 4.4.4 asia retail version image for me to restore my phone via fastboot command, do anyone have the EU or Asia retail image of 4.4.4 of XT1052? I really need help!! Thank you soooo much!!!
Click to expand...
Click to collapse
You should have never attempted to downgrade. It is posted literally all over these forums to not attempt this. There is no 4.4.4 FXZ for any of the XT1052 variants yet. You can try some methods, but they all have risk. The only safe way to recover is to wait for the 4.4.4 FXZ to be released, but there's no telling when that will happen.
Some have had success by skipping the "flash partition gpt.bin" command, but if you do this you are at risk of bricking when you take the update back to 4.4.4. Again, some have been successful, but anyone that tells you it is completely safe is mistaken.
Good Luck :good:

samwathegreat said:
You should have never attempted to downgrade. It is posted literally all over these forums to not attempt this. There is no 4.4.4 FXZ for any of the XT1052 variants yet. You can try some methods, but they all have risk. The only safe way to recover is to wait for the 4.4.4 FXZ to be released, but there's no telling when that will happen.
Some have had success by skipping the "flash partition gpt.bin" command, but if you do this you are at risk of bricking when you take the update back to 4.4.4. Again, some have been successful, but anyone that tells you it is completely safe is mistaken.
Good Luck :good:
Click to expand...
Click to collapse
Thank You for the answer

Related

German Retail Firmware

Hello Guys,
Where can i get the German Retail Firmware 4.4.4.???
I have a US Moto x 32 GB and i have flashed it with the German 4.4.2.
Now i want to uptade to 4.4.4.
I think OTA brick my phone!!
Is that right??
Greets Sven
Demolition888 said:
Hello Guys,
Where can i get the German Retail Firmware 4.4.4.???
I have a US Moto x 32 GB and i have flashed it with the German 4.4.2.
Now i want to uptade to 4.4.4.
I think OTA brick my phone!!
Is that right??
Greets Sven
Click to expand...
Click to collapse
There is no leaked 4.4.4 full SBF yet. In a couple weeks, maybe a month it will probably be released.
As long as you never downgraded from a higher version to the german 4.4.2, you can take the OTA without risk. You will need stock Recovery, no Xposed, and no significant modifications made to /system.
Assuming you are full stock and haven't made modifications, the OTA should install without issue.
We will need more details to properly advise you.
Demolition888 said:
Hello Guys,
Where can i get the German Retail Firmware 4.4.4.???
I have a US Moto x 32 GB and i have flashed it with the German 4.4.2.
Now i want to uptade to 4.4.4.
I think OTA brick my phone!!
Is that right??
Greets Sven
Click to expand...
Click to collapse
If you used RSDLite and fully flashed the SBF to your phone, or used mfastboot and flashed ALL PARTS to your phone, you are safe to take whatever 4.4.4 OTA is pushed to you.
If you only flashed "parts" and have mixed versions (system.img from one rom, no-hols.bin from another, etc), then you need to be careful.. or if you have one version on your phone and try to downgrade it to a lower version.
As @samwathegreat said, there is no leak of a 4.4.4 SBF yet, (well the Verizon one has but we would not recommend flashing it on anything but a Verizon XT1060 phone)
The guys that maintain http://sbf.droid-developers.org/phone.php?device=0 do a great job FINDING the full SBF files, and posting them as soon as they get their hands on them. But since that site isn't owned, operated or supported by Moto, we have no way of knowing how long it will take for the SBF's to show up.
KidJoe said:
If you used RSDLite and fully flashed the SBF to your phone, or used mfastboot and flashed ALL PARTS to your phone, you are safe to take whatever 4.4.4 OTA is pushed to you.
If you only flashed "parts" and have mixed versions (system.img from one rom, no-hols.bin from another, etc), then you need to be careful.. or if you have one version on your phone and try to downgrade it to a lower version.
As @samwathegreat said, there is no leak of a 4.4.4 SBF yet, (well the Verizon one has but we would not recommend flashing it on anything but a Verizon XT1060 phone)
The guys that maintain http://sbf.droid-developers.org/phone.php?device=0 do a great job FINDING the full SBF files, and posting them as soon as they get their hands on them. But since that site isn't owned, operated or supported by Moto, we have no way of knowing how long it will take for the SBF's to show up.
Click to expand...
Click to collapse
Hi,
I'm italian and have moto x buy in usa from tmobile retail.
now unlocked and root.and TWRP recovery
flashed manual all part of rom 4.4.2 of en.DE stock rom and tmobile modem, and ALL is OK
received the ota en.DE (backuped to my pc for sure) but not install
can I install directly the update received without issue ?
Think also that I need the new tmobile modem 4.4.4 for use in europe GSM ...
can you help me ?
thanks mate
jonata said:
Hi,
I'm italian and have moto x buy in usa from tmobile retail.
now unlocked and root.and TWRP recovery
flashed manual all part of rom 4.4.2 of en.DE stock rom and tmobile modem, and ALL is OK
received the ota en.DE (backuped to my pc for sure) but not install
can I install directly the update received without issue ?
Think also that I need the new tmobile modem 4.4.4 for use in europe GSM ...
can you help me ?
thanks mate
Click to expand...
Click to collapse
hi look here
https://plus.google.com/107316395679577990394/posts/KQnCS4NxWBM
jonata said:
Hi,
I'm italian and have moto x buy in usa from tmobile retail.
now unlocked and root.and TWRP recovery
flashed manual all part of rom 4.4.2 of en.DE stock rom and tmobile modem, and ALL is OK
received the ota en.DE (backuped to my pc for sure) but not install
can I install directly the update received without issue ?
Think also that I need the new tmobile modem 4.4.4 for use in europe GSM ...
can you help me ?
thanks mate
Click to expand...
Click to collapse
If you have flashed modem files from a different rom than the rest of your phone, any OTA will likely fail its pre-validation checks.
Mixing parts of two different roms isn't advised. Taking updates can fail, brick your phone, or cause other unexpected results.
Sure, there are one or two who say they've done it and are "fine" but we've seen enough posts to know the next OTA, next time they flash, they will likely encounter issues.
My advice. stay with what you have, and wait for the 4.4.4 SBF for the model/carrier you have, and fully flash it. It is the SAFEST way to go.
KidJoe said:
If you have flashed modem files from a different rom than the rest of your phone, any OTA will likely fail its pre-validation checks.
Mixing parts of two different roms isn't advised. Taking updates can fail, brick your phone, or cause other unexpected results.
Sure, there are one or two who say they've done it and are "fine" but we've seen enough posts to know the next OTA, next time they flash, they will likely encounter issues.
My advice. stay with what you have, and wait for the 4.4.4 SBF for the model/carrier you have, and fully flash it. It is the SAFEST way to go.
Click to expand...
Click to collapse
thanks for help bro
another question : about 4.4.4 firm like the new dialer ....
can I find somewhere (or if you can tell me where) and overwrite with RootExplorer (with right permission) ?
or maybe will have FC ?
thanks again :good:
OK AWAITING !
need also for use ALWAYS tmobile modem 4.4.4 because if I don't flash I cannot use in italy ....
KidJoe said:
If you used RSDLite and fully flashed the SBF to your phone, or used mfastboot and flashed ALL PARTS to your phone, you are safe to take whatever 4.4.4 OTA is pushed to you.
If you only flashed "parts" and have mixed versions (system.img from one rom, no-hols.bin from another, etc), then you need to be careful.. or if you have one version on your phone and try to downgrade it to a lower version.
As @samwathegreat said, there is no leak of a 4.4.4 SBF yet, (well the Verizon one has but we would not recommend flashing it on anything but a Verizon XT1060 phone)
The guys that maintain http://sbf.droid-developers.org/phone.php?device=0 do a great job FINDING the full SBF files, and posting them as soon as they get their hands on them. But since that site isn't owned, operated or supported by Moto, we have no way of knowing how long it will take for the SBF's to show up.
Click to expand...
Click to collapse
@KidJoe:
my position is to have flashed in manual ALL PART of SBF 4.4.2 en.DE
Need only to reflash the modem from 4.4.2 TMOBILE because the gsm phone doesn't work (no signal)
so I don't make any mix with more roms. only stock en.De (all parts) and the modem from tmobile.
I received the ota update for 4.4.4 retail en.DE ...
do you think it's safe to install, or as you said, await the full firmware 4.4.4 SBF ?
do you know where, eventualy, I can find tmobile modem 4.4.4 to flash ?
if can't find the 4.4.4, the 4.4.2 tmobile modem (that now I use with success ) do you think is good or not to works in 4.4.4 firmware en.DE ?
thanks again
---------- Post added at 11:24 PM ---------- Previous post was at 11:22 PM ----------
Demolition888 said:
Hello Guys,
Where can i get the German Retail Firmware 4.4.4.???
I have a US Moto x 32 GB and i have flashed it with the German 4.4.2.
Now i want to uptade to 4.4.4.
I think OTA brick my phone!!
Is that right??
Greets Sven
Click to expand...
Click to collapse
hi bro,
where you from ? you need to flash also tmobile modem to works well with 4.4.2 en.DE or not ?
tks for info that you can give me
jonata
jonata said:
@KidJoe:
my position is to have flashed in manual ALL PART of SBF 4.4.2 en.DE
Need only to reflash the modem from 4.4.2 TMOBILE because the gsm phone doesn't work (no signal)
so I don't make any mix with more roms. only stock en.De (all parts) and the modem from tmobile.
I received the ota update for 4.4.4 retail en.DE ...
do you think it's safe to install, or as you said, await the full firmware 4.4.4 SBF ?
do you know where, eventualy, I can find tmobile modem 4.4.4 to flash ?
if can't find the 4.4.4, the 4.4.2 tmobile modem (that now I use with success ) do you think is good or not to works in 4.4.4 firmware en.DE ?
thanks again
---------- Post added at 11:24 PM ---------- Previous post was at 11:22 PM ----------
hi bro,
where you from ? you need to flash also tmobile modem to works well with 4.4.2 en.DE or not ?
tks for info that you can give me
jonata
Click to expand...
Click to collapse
hi Jonata
i am the guy who sell u the phone
i helped a guy today here in Italy to do the same thing that u want
what u must to it s to flash with Rsd lite the 4.4.2 fimrware the DE or Fr or GB or the version u want
first of flashing u need to remove the first line from firmware xml that with getvar etc,then save it ,add it to Rsd lite and flash it.
after u flash it succesfully ,boot the phone ,download the OTA and install it normally.
after the update at 4.4.4 u need to flash the 4.4.2 modem from Tmobile.
thats all.
if u need more help ,u have my number!
enjoy
danger2u said:
hi Jonata
i am the guy who sell u the phone
i helped a guy today here in Italy to do the same thing that u want
what u must to it s to flash with Rsd lite the 4.4.2 fimrware the DE or Fr or GB or the version u want
first of flashing u need to remove the first line from firmware xml that with getvar etc,then save it ,add it to Rsd lite and flash it.
after u flash it succesfully ,boot the phone ,download the OTA and install it normally.
after the update at 4.4.4 u need to flash the 4.4.2 modem from Tmobile.
thats all.
if u need more help ,u have my number!
enjoy
Click to expand...
Click to collapse
hi Daniel,
I flashed manual in fastboot ALL part of 4.4.2 files from SBF en.DE (not use RDS)
as you say me, the radio modem doesn't works and flash the tmobile modem (like you send me) and all is OK
now received notification about OTA to 4.4.4 (en.DE)
so, you think it's safe to download ota abd update ?
if radio not work, reflash manual the fsg.mbn and NON-HLOS.bin that I've, right ?
Thanks for reply Danny
EDIT :
I'm on 4.4.2 en.DE stock but ROOTED an with xposed modules and TWRP recovery ....
any problems to install ota ?
jonata said:
hi Daniel,
flashed manual in fastboot ALL part of 4.4.2 files from SBF en.DE
as you say me, the radio modem doesn't works and flash the tmobile modem (like you send me) and all is OK
now received notification about OTA to 4.4.4 (en.DE)
so, you think it's safe to download ota abd update ?
if radio not work, reflash manual the fsg.mbn and NON-HLOS.bin that I've, right ?
Thanks for reply Danny
Click to expand...
Click to collapse
flash again the 4.4.2 but this time with RSD LITE.
follow this tutorial
https://plus.google.com/107316395679577990394/posts/PsMyrv2wbeS
let me know
Hello,
I have the same problem. I bought a US Moto X Dev Ed. and flashed the german retail with the instructions from this thread: http://forum.xda-developers.com/moto-x/development/update-xt1058-to-android-4-4-2-uk-t2628381
Is it right that I should not accept the OTA because I deleted the modem lines?

4.4.4 xt1053 EMMC error

I flashed all the way back to stock using fastboot and mfastboot to the 1053 4.4.3 firmware. When I tried to install the 4.4.4 OTA, I received the EMMC error. I'm using a 1053 on AT&T. Could it be that I had flashed the AT&T 4.4.4 then going back to 4.4.3 that could be causing the error?
beefgoat said:
I flashed all the way back to stock using fastboot and mfastboot to the 1053 4.4.3 firmware. When I tried to install the 4.4.4 OTA, I received the EMMC error. I'm using a 1053 on AT&T. Could it be that I had flashed the AT&T 4.4.4 then going back to 4.4.3 that could be causing the error?
Click to expand...
Click to collapse
Yes. Downgrade is a no no. Post all details.
I was on stock 4.4.3 and flashed a pre-rooted 4.4.4 AT&T image in TWRP. I had read somewhere that the BL's were the same between the two versions. I didn't like the AT&T version, so I flashed back to 1053 4.4.3. The phone has been working just fine. Now, I can't upgrade to the 1053 4.4.4 OTA update. Should I just wait for the SBF file to become available?
beefgoat said:
I was on stock 4.4.3 and flashed a pre-rooted 4.4.4 AT&T image in TWRP. I had read somewhere that the BL's were the same between the two versions. I didn't like the AT&T version, so I flashed back to 1053 4.4.3. The phone has been working just fine. Now, I can't upgrade to the 1053 4.4.4 OTA update. Should I just wait for the SBF file to become available?
Click to expand...
Click to collapse
A ROM flash doesn't equal a firmware downgrade. RSD going downward is the problem.
But once on a custom recovery you need to backup your virgin "rom" to save it for any future OTA!
aviwdoowks said:
A ROM flash doesn't equal a firmware downgrade. RSD going downward is the problem.
But once on a custom recovery you need to backup your virgin "rom" to save it for any future OTA!
Click to expand...
Click to collapse
Well, dooks. I'll just wait for the sbf.

[Q] Moto X (2014) XT 1092 back to kitkat

Hi, I have a unrooted 1092 where I applied the OTA to 5.0.
I have found lolipop to be a dissapointment and want to go back to kitkat. Is there a way to do this? My phone has a locked bootloader (i have not unlocked it) and I have been unable to find a factory image for this model.
The current system version is 22.21.19.victara_reteu.reteuall.en.EU retin
-Ivar
ivaho said:
Hi, I have a unrooted 1092 where I applied the OTA to 5.0.
I have found lolipop to be a dissapointment and want to go back to kitkat. Is there a way to do this? My phone has a locked bootloader (i have not unlocked it) and I have been unable to find a factory image for this model.
The current system version is 22.21.19.victara_reteu.reteuall.en.EU retin
-Ivar
Click to expand...
Click to collapse
Hey Ivar,
You've got 2 choices; use mfastboot to revert back to KitKat. So you must unlock your bootloader. Or try motorola's RSD Lite tool..
I recommend making a full nandroid back up before attempting anything.
Check here; techbeasts.com/2014/11/11/how-to-restore-moto-x-2014-to-stock
If you need any help, let me know! Good luck !
Btw, Motorola stock rom's are called SBF's ( system binary file )
boardking_zero said:
Hey Ivar,
You've got 2 choices; use mfastboot to revert back to KitKat. So you must unlock your bootloader. Or try motorola's RSD Lite tool..
I recommend making a full nandroid back up before attempting anything.
Check here; techbeasts.com/2014/11/11/how-to-restore-moto-x-2014-to-stock
If you need any help, let me know! Good luck !
Btw, Motorola stock rom's are called SBF's ( system binary file )
Click to expand...
Click to collapse
techbeasts.com/2014/11/11/how-to-restore-moto-x-2014-to-stock-firmware/

[Q] Help downgrade to offical verizon dev from lollipop

Hey, i got the verizon dev edition with unlocked boktloader and root device i flash xt1052 rom to get the ota to 5.1
And aftet i flashed the baseband of 4.4.4 xt1060 to get my network work.
But now i want to get back to 4.4.4 of the verizon dev edition and i download tgz fille from the motorola site
And i wanted to flash it on rsd lite but i didnt have the xml fille there? So i dont know what to do now?
Ty for help
harel013 said:
Hey, i got the verizon dev edition with unlocked boktloader and root device i flash xt1052 rom to get the ota to 5.1
And aftet i flashed the baseband of 4.4.4 xt1060 to get my network work.
But now i want to get back to 4.4.4 of the verizon dev edition and i download tgz fille from the motorola site
And i wanted to flash it on rsd lite but i didnt have the xml fille there? So i dont know what to do now?
Ty for help
Click to expand...
Click to collapse
there is a high risk of bricking your device while downgrading http://forum.xda-developers.com/moto-x/general/info-warning-risks-downgrading-impacts-t3058202
It's highly risky to downgrade but if you persist just make sure your bootloader and partition table is not the one that got upgtaded with the latest 5.1 rom. If it is the latest then don't do it.
Sent from my Moto X using Tapatalk
You can downgrade completely to 4.4.4.
But don't take OTA, your phone will brick.
The safest way in my opinion is (if you want to downgrade);
- Flash entire official firmware of XT1060 to your phone.
- DON'T TAKE OTA
- Wait for full firmware of XT1060(5.1)
- Flash full firmware of XT1060(5.1)
But if you want to play with 5.1, you can try this;
In my case, I have XT1056, and I wanted to play around with 5.1, so I converted from XT1056(4.4.4) to XT1053(4.4.4), then took OTA to XT1053 (5.1).
After that I tried AOSP but my bluetooth headset had a problem with phone function, then I decided to go back to official firmware again.
Since there is no Lollipop image for XT1053 or XT1056 now, I had to flash another variants like XT1052 and XT1058, but I got no signal.
I had to downgrade to XT1056(4.4.4) and using it for a day. After that I found out that file size of fsg.mbn differ by variants, then I downloaded XT1053(5.1 OTA) to get it.
I mixed up an entire XT1052(5.1 retail EN) with fsg.mbn from XT1053(5.1 OTA) and flashed them manually. Now my XT1056 works very well (with Xposed framework).
Keep in mind that YOU DO THIS ON YOUR OWN RISK.
ong14 said:
You can downgrade completely to 4.4.4.
But don't take OTA, your phone will brick.
The safest way in my opinion is (if you want to downgrade);
- Flash entire official firmware of XT1060 to your phone.
- DON'T TAKE OTA
- Wait for full firmware of XT1060(5.1)
- Flash full firmware of XT1060(5.1)
But if you want to play with 5.1, you can try this;
In my case, I have XT1056, and I wanted to play around with 5.1, so I converted from XT1056(4.4.4) to XT1053(4.4.4), then took OTA to XT1053 (5.1).
After that I tried AOSP but my bluetooth headset had a problem with phone function, then I decided to go back to official firmware again.
Since there is no Lollipop image for XT1053 or XT1056 now, I had to flash another variants like XT1052 and XT1058, but I got no signal.
I had to downgrade to XT1056(4.4.4) and using it for a day. After that I found out that file size of fsg.mbn differ by variants, then I downloaded XT1053(5.1 OTA) to get it.
I mixed up an entire XT1052(5.1 retail EN) with fsg.mbn from XT1053(5.1 OTA) and flashed them manually. Now my XT1056 works very well (with Xposed framework).
Keep in mind that YOU DO THIS ON YOUR OWN RISK.
Click to expand...
Click to collapse
My situation is same with you. My phone is xt1056 sprint. I converted to xt1053, and got ota to 5.1. But I don't like stock 5.1,there are some bug with graphic... I flashed and used customs Rom CM, PA,Carbon...some day. But now, I want to come back 4.4.4. Can you guide me more details?
I think if you flash complete 4.4.4 from 5.1, phone will bricked, because bootloader can not downgrade as someone said in high risk ...topic. Maybe you can flash 4.4.4 fw with edit xml to NOT flash motoboot and gpt....
Right ?
And last question, if there is a method to flash back 4.4.4, can I flash 4.4.4 xt1053 ? I don't want my phone have many bloatware sprint xt1056.
md07 said:
My situation is same with you. My phone is xt1056 sprint. I converted to xt1053, and got ota to 5.1. But I don't like stock 5.1,there are some bug with graphic... I flashed and used customs Rom CM, PA,Carbon...some day. But now, I want to come back 4.4.4. Can you guide me more details?
I think if you flash complete 4.4.4 from 5.1, phone will bricked, because bootloader can not downgrade as someone said in high risk ...topic. Maybe you can flash 4.4.4 fw with edit xml to NOT flash motoboot and gpt....
Right ?
And last question, if there is a method to flash back 4.4.4, can I flash 4.4.4 xt1053 ? I don't want my phone have many bloatware sprint xt1056.
Click to expand...
Click to collapse
You can flash back to 4.4.4 of XT1053 or XT1056 as you prefer, I think their radio are compatible.
But when 5.1 comes out, DON'T TAKE OTA. You have to wait for a full firmware to upgrade your phone.
I always use a manual flash method, so I don't have to edit an xml file.
When you downgrades, you will see a warning message, just ignore them.
ong14 said:
You can flash back to 4.4.4 of XT1053 or XT1056 as you prefer, I think their radio are compatible.
But when 5.1 comes out, DON'T TAKE OTA. You have to wait for a full firmware to upgrade your phone.
I always use a manual flash method, so I don't have to edit an xml file.
When you downgrades, you will see a warning message, just ignore them.
Click to expand...
Click to collapse
Do you use fastening to flash fw? And you flash all part inside fw? Include motorboat and got... ? After flash, do you make unlock network again ?
I used mfastboot to flash all CGs to my phone. But you may try to skip some CGs like KidJoe said.
Every time when you return to stock or do a hard reset, you have to do the SIM-unlock process again.
harel013 said:
Hey, i got the verizon dev edition with unlocked boktloader and root device i flash xt1052 rom to get the ota to 5.1
And aftet i flashed the baseband of 4.4.4 xt1060 to get my network work.
But now i want to get back to 4.4.4 of the verizon dev edition and i download tgz fille from the motorola site
And i wanted to flash it on rsd lite but i didnt have the xml fille there? So i dont know what to do now?
Ty for help
Click to expand...
Click to collapse
Moto is no longer including the XML to flash via RSDLite, but you could make your own if needed... instead they include a BATCH file which calls a copy of Moto's fastboot to flash it.
That being said... I WARN YOU!!! You will risk bricking your phone if you attempt to downgrade. While there is a slight chance the phone will not brick, we have enough who have bricked to say it is not safe!!
Some will say... "its ok, just skip motoboot.img and gpt.bin when flashing" that isn't safe either. If you later get prompted for and take an OTA update you'll again likely brick. Further when motoboot.img and GPT.BIN are missmatched from the rest of a STOCK Moto rom we've seen "bugs" or "issues" of things no working, like speaker phone, Settings -> Security menu, etc which are not a problem when all parts of your phone are consistent.
You're best bet... wait until a full 5.1 SBF for the Verizon XT1060 is either posted to Moto's web site of Dev Edition Images, or wait until a copy leaks... however, that too many also fail *IF* the GPT.BIN and components of motoboot.img are newer or different in the build you are running compared to what is made available as the XT1060 5.1 SBF.
KidJoe said:
Moto is no longer including the XML to flash via RSDLite, but you could make your own if needed... instead they include a BATCH file which calls a copy of Moto's fastboot to flash it.
That being said... I WARN YOU!!! You will risk bricking your phone if you attempt to downgrade. While there is a slight chance the phone will not brick, we have enough who have bricked to say it is not safe!!
Some will say... "its ok, just skip motoboot.img and gpt.bin when flashing" that isn't safe either. If you later get prompted for and take an OTA update you'll again likely brick. Further when motoboot.img and GPT.BIN are missmatched from the rest of a STOCK Moto rom we've seen "bugs" or "issues" of things no working, like speaker phone, Settings -> Security menu, etc which are not a problem when all parts of your phone are consistent.
You're best bet... wait until a full 5.1 SBF for the Verizon XT1060 is either posted to Moto's web site of Dev Edition Images, or wait until a copy leaks... however, that too many also fail *IF* the GPT.BIN and components of motoboot.img are newer or different in the build you are running compared to what is made available as the XT1060 5.1 SBF.
Click to expand...
Click to collapse
Yea i think i will wait for the full sbf 5.1 for verizon, i dont want to take the chance.
Thank you all for your help when the 5.1 update will come to the verizon you think?

[Q] Moto x 2013 Official firmware 5.1 required

Hi
I somehow wiped my system files and now my phone is practically useless. I have a moto x 2013 Asia retail version and i had lollipop installed.
1) Can somebody provide me with the official 5.1 asia retial firmware?
or
2) Can somebody please guide me how to downgrade my bootloader so that i can install 4.4.4.
I have TWRP version 2.8 as recovery on my phone.
keerat1990 said:
Hi
I somehow wiped my system files and now my phone is practically useless. I have a moto x 2013 Asia retail version and i had lollipop installed.
1) Can somebody provide me with the official 5.1 asia retial firmware?
or
2) Can somebody please guide me how to downgrade my bootloader so that i can install 4.4.4.
I have TWRP version 2.8 as recovery on my phone.
Click to expand...
Click to collapse
You can use the RETEU version as of now and flash it in ur phone using RSDlite as ASIAN version is still not available
anadarco7 said:
You can use the RETEU version as of now and flash it in ur phone using RSDlite as ASIAN version is still not available
Click to expand...
Click to collapse
Could you explain in detail how do i get back to 4.4.4? I am fairly new to all this. i'll update my phone over OTA later on.
Can you help me with 4.4.4? Step wise? I know about the manual flashing but when i do so it was my bootloader is updated so i cannot downgrade.
keerat1990 said:
I know about the manual flashing but when i do so it was my bootloader is updated so i cannot downgrade.
Click to expand...
Click to collapse
That's true. You can not downgrade, if you are on a light, official side. But if you want to try dark side - flash your Asia region 4.4.4 without "gpt" and "motoboot" lines in its XML file. Once flashed 4.4.4, you can take OTA 5.1 on it without any problem.
A message to future users. Being on 5.1.1, then downgrade to 4.4.4, and taking 5.1 OTA - will brick. Don't do that.

Categories

Resources