hi ppl
i just bought me a used sm-v700 and its stuck in screen of death,
i have tried connecting it to both Kies and Kies 3, fully updated ofc, restarted my pc after installations,
none of the above programs can connect to my watch :/
tried calling samsung support to no use (send it in)
what do i do next?
my objective with the watch is to get it working ofc, and get it rooted to work with my sony xperia z2
Use Odin 3.09 to flash a stock image. I'm commuting right now so I doing have a link.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Hi mate, this has happened to me as well, i was sure i had ruined my watch. What fixed it in my case was to drain the battery. Because once i was in the screen of death the watch doesn't seem to ever turn off. When i turned the watch back on i used heimdall to restore the firmware. Odin failed miserably.
Sent fra min GT-I9505 via Tapatalk
pzayx said:
Hi mate, this has happened to me as well, i was sure i had ruined my watch. What fixed it in my case was to drain the battery. Because once i was in the screen of death the watch doesn't seem to ever turn off. When i turned the watch back on i used heimdall to restore the firmware. Odin failed miserably.
Sent fra min GT-I9505 via Tapatalk
Click to expand...
Click to collapse
the battery on my watch has drained by now, tho i have had it both connected to my pc and to my usb wall charger it looks like it wont charge, it only starts up to the screen of death when its connected and goes all black when i remove the usb cable :/
the watch only turns on for a few sec's and then dies, turns on automatically and then dies,, over and over :/
since that it just whent black, googled a bit and found a thread about this on this site which had this youtube link on it v=5WzGC0786U0
removed the battery from the motherboard and at least it charges normally, i think,,
it charges at least now, and i can access "download" and "recovery" mode but neither Heimdall or Odin can find it :/
anyone got any ideas? got the **** to find the download mode again, but pc cant find it
hi, sorry i have been away from the computer for a while.
exactly, how did you get to the SOD screen btw?
for me my pc found the watch when it was in the SOD screen after i got the d..n thing restarted.
but when i tried to use odin it froze for forever so i had to repeat the drain/restart cycle and then heimdall played nicely with it.
other than that i really got no idea other than what you have allready brought up. i guess you just have to try and try and try.
removing the battery is probably a better way to restart instead of draining it.
i might add that i used heimdall on ubuntu(for me heimdall has always seemed better in linux for some reason)
and if it is a driver issue the driver you need should come with the distro. so you could try to power up a livedisk and try.
or you could try to get it recoqnized in a different usb port if you haven't tried that.
Cant hurt, right.
Good luck!
pzayx said:
hi, sorry i have been away from the computer for a while.
exactly, how did you get to the SOD screen btw?
for me my pc found the watch when it was in the SOD screen after i got the d..n thing restarted.
but when i tried to use odin it froze for forever so i had to repeat the drain/restart cycle and then heimdall played nicely with it.
other than that i really got no idea other than what you have allready brought up. i guess you just have to try and try and try.
removing the battery is probably a better way to restart instead of draining it.
i might add that i used heimdall on ubuntu(for me heimdall has always seemed better in linux for some reason)
and if it is a driver issue the driver you need should come with the distro. so you could try to power up a livedisk and try.
or you could try to get it recoqnized in a different usb port if you haven't tried that.
Cant hurt, right.
Good luck!
Click to expand...
Click to collapse
well today or more like just now i tried and tried and tried to get the tizen uppdate flashed into it with odin and i finally got the damn thing to accept the file,
only problem i got now is that it wont connect to my sony xperia z2
and now the touch wont work :/
kaviar said:
and now the touch wont work :/
Click to expand...
Click to collapse
Flash TizenMOD 3.0 with Odin ?
Recover back GG from sceen of death
I used this method and its working to recover back my GG error issue
I hope this will help u ..
1 - Download and install odin 3.0.9
2 - Download GG stock rom with the last file name *******NE9 ( If the file is zip file , u must extract it first to get the file *******NE9.tar - something like that )
3 - Connect your phone ( must be samsung phone ) . Odin will detect and auto install driver for usb detection. After that disconnect it
4 - Connect your GG to usb ( It will auto detect your GG )
5 - uncheck AUTO REBOOT & REPARTITION
6 - Click PDA button and set to the location you put the NE9 file
7 - Wait for a while and after odin finish checking that file click START BUTTON
8 - Wait until upgrading proses finish
- ( YOUR GG WILL SHOW BLUE COLOR PROGRESS BAR )
9 - Odin will show PASS ! in green color at the status bar if the process success
10 - Disconnect your gear & manually reboot ( press power button about 5 sec )
* sometimes you must reboot 2-3 times to make GG fully reconfigure back it system
* need to unpair/pair again the bluetooth between GG and the phone
* Usually after bluetooth paring success., gear manager will auto update and then u can
use your GG as usual.
That all .. ENJOY YOUR NEW TIZEN ... PEACE !
kofxi, Your a star man. Just got my gear today and tried flashing updating to _V700OXAAMK7 and got screen of death nothing I tried worked.
Just grabbed the NE9 file and worked like a charm, I owe you several drinks.
George
Related
No firmware and USB problem
I have a large problem, my wifes galaxy s won't go by the first screen (says GALAXY S GT-I9000)
So i thought i'd fix it using odin using the 3 button combo. But that isn't working anymore.
Luckily i have a usb jig which gets me to the download mode ...... but !
When i connect the pc cable (tried 2 OE samsung ones) i get device not recognized so i can't use odin to fix it.
What can i do, or do i have to send it to a repair centre to be resurrected ?
I have searched and searched but not found any topics with the same issues i have on her phone.
Need a bit more info i.e were you flashing the phone??if so which rom?
Then phone was playing up so i flashed darkys 10.4.2.
However the usb connection wouldn't work so i flashed it to standard JVT
using mobile odin.
Then i rooted it and went to go into recovery mode and it wouldn't turn on.
I tried to help the gentleman , but no luck . From what he told me , phone turns on after battery insertion , and It is not recognised by usb => so odin not usable .
If you can get to download mode but the phone isn't recognized by your computer then i'd say it's a driver issue. Install your phone's drivers again. To do that, just installing kies is enough BUT be sure to open task manager in windows and kill any process that has kies in it's name before opening odin.
If that still isn't flying i'd try using different USB ports and even with a different computer.
Extra advice:
- try not to flash bootloaders for now. That means picking a rom that has no bootloaders included but matches your phone's current bootloader. If you were using gingerbread flash a gingerbread rom, if you were using froyo, flash a froyo rom.
phone not starting up past first screen (GALAXY S GT-I9000 in white on black screen), phone not recognized neither by pc nor laptop ( usb drivers installed ) , phone turns on after battery insertion without pressing anything.
This manual is from a German board
Take the battery out, then hold the 3 keys combo for download and put the battery back on. Now you should start the download mode.
If not, then try it with a jig.
Good luck!
GOT A JIG. WORKS FINE.
But pc wont recognize it !!
Have you double checked that you have the right drivers installed? I know you have to use the Nexus S drivers for CM9, not sure about Darky's ROM.
Drivers
Download drivers 64 bit | 32 bit from here and install.
It is NOT the drivers as my other galaxy s connects fine every time.
Drivers have been removed and installed repeatedly.
I would suggest a different computer, maybe a different cable. I have this same issue with my infuse, hope you get this resolved.
Sent from my Desire HD using XDA App
Already tried that as well
You could try Adam outler's unbrickable mod.
Pasted from other thread:
I just wrote a wall of text b4 and my browser crashed GG
Well, here we go again, i will only tell what I did/the process
I did a nandroidbackup, then i wiped all data (data+cache+dalvik), installed CyanogenMod 9 (Build 16), it rebooted automaticly, so I entered recovery again, installed Google Apps from there, wiped data and cache (no dalvik), rebooted.
Ended up looping at the Samsung screen (not animation), and I couldnt do the 3-button-combo, so the NANDroid backup is useless.
I can enter the download thing, but i dont even know what it does.
Tried plugging it in the charger (after letting it dry out during the night), and only the loop thing appears. Cant do anything.
I see that theres something called odin (Since my download thing is working (VolDown+Home+Power) if its that you mean.
If its possible to fix my phones state, please tell me how, since I startedrooting, flashing and stuff yesterday (Gotta start at some point) and followed HDTechVideos tut (On his website)
woolf clubs said:
You could try Adam outler's unbrickable mod.
Click to expand...
Click to collapse
I have nowhere near enough ability for that. Pity though.
Your problem is most likely the USB port. Maybe cleaning it might help. It happened to me for a few months then when I got the S2 I stopped using it. Began to use it as my home 3g wifi modem and kept it on charge the whole time. A few weeks later tried connecting it to the computer and it worked first go. Ever since it has worked perferctly. I suspect the problem possibly started by a rain drop getting into the port.
Mind you, even when it wasn't being recognised by the PC, I would constantly connect, remove, reconnect, reboot PC and phone etc and it would sometimes get recognised. Other times it wouldn't connect but Odin still recognised it.
Sounds silly but try leaving it on charge as I did and maybe, just maybe you'll be lucky like I was.
Sent from my GT-I9100T
Well as of today it is away to the O2 repair centre.
Its under warranty (unless the find out it was rooted etc) so fingers crossed.
Well had a text back today to say my phone has been despatched, so here is hoping that its fixed.
It came back from the repair centre yesterday with a note saying a part had been replaced,
no costs for me, yippeeeeeeee.
my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!
sourabh12 said:
my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!
Click to expand...
Click to collapse
i guess your gonna download a firmware on 2.2.1 and flash it..........but i recommend 2.3.3 firmware..try it on mine the ......!....... but still odin detects it......2.2.1 is old try AOKP for are tab....best rom
First, which tab is yours.
Edit: from your pm you indicate P1000.
OK, I sounds luke a broken record now but here goes.
Have you had a look at overcome method.
You need to flash GB-stock-safe-v5.
Sometimes even when screen is blank, it can still be a download mode.
So, be sure that it is charged (using original wall charger).
Then ready Odin and the files in proper places and pre connect the tab to PC.
Then boot to download mode and quickly flash using Odin.
http://www.teamovercome.net
Read the guide,
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
Missing pictures can be seen there.
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
After it is revived, you may want to continue.
If so.
Jump here for the kernel
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Sent from my GT-P1000 using xda app-developers app
Read my post at the bottom of this thread:
http://forum.xda-developers.com/showthread.php?t=1826324
I had the same issue but I've now sorted it.
tab working again!!
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.
What about a Tab P1000N? What can be done with that one?
One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.
priyana said:
One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.
Click to expand...
Click to collapse
Thanks, it did work for me.
You saved my world
sourabh12 said:
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.
Click to expand...
Click to collapse
I looked every where for 24 hours and then I ran across your post simply......now I and anyone else that has this problem knows to let the tablet charge on the computer our laptop for 20 mind and then the bricked download screen will appear and your good to go you post was very helpful maybe the only real method out there thanks a million:angel::good:
Hi, today the phone died unexpectedly, no flash involved.
It was just running fine, playing music, logging a gps track and running 'linux deploy' (with arch linux) that I installed just 2 days ago.
SuperSu informed me it granted superuser permissions to the latter several times as I was playing with different linux configuration options (and maybe this was the culprit).
GPS sucked almost all the battery juice so after a while, I was informed that battery was low; I locked the phone with the power button and went back home.
After a while the music interrupted, I took the phone from the pocket and inadvertitely pushed a button on the screen saying something like "poweroff".
When I initially connected it to pc usb to recharge, it Initially it showed the usual battery animation then after the first unsuccessful and subsequent various power-on (for recovery, donload, etc) doesn't show anymore.
Instead now when connected to usb it blinks continuosly every 4 seconds, the same if I power on while disconnected, this time blinking the samsung logo.
It goes to download (DOWN+HOME+POWER) only if usb is disconnected.
It goes to ramdump arm9 mode (UP+HOME+POWER) only if usb connected.
UP+POWER and UP+DOWN+POWER don't work.
heimdall detects it but every dump operation (print or download-pit) ends with:
Claiming interface...
Attempt failed. Detaching driver...
Claiming interface again...
Setting up interface...
ERROR: Setting up interface failed!
Releasing device interface...
Re-attaching kernel driver...
More than a year ago I installed android 2.3.6 using kies (on a friend pc) and rooted it with a script under linux, zRoot or z4root if I remember right, also couldn't install CM Recovery, so it's the stock recovery one but as said before it doesn't work.
I was going to try OneClick Unbrick on it but it's a while I haven't backed up contacts on the phone itself recently, is it going to wipe them out?
I'm going to try to install a non stock rom anyway but not before knowing if it is possible to dump/recover them.
stompboxer said:
Hi, today the phone died unexpectedly, no flash involved.
It was just running fine, playing music, logging a gps track and running 'linux deploy' (with arch linux) that I installed just 2 days ago.
SuperSu informed me it granted superuser permissions to the latter several times as I was playing with different linux configuration options (and maybe this was the culprit).
GPS sucked almost all the battery juice so after a while, I was informed that battery was low; I locked the phone with the power button and went back home.
After a while the music interrupted, I took the phone from the pocket and inadvertitely pushed a button on the screen saying something like "poweroff".
When I initially connected it to pc usb to recharge, it Initially it showed the usual battery animation then after the first unsuccessful and subsequent various power-on (for recovery, donload, etc) doesn't show anymore.
Instead now when connected to usb it blinks continuosly every 4 seconds, the same if I power on while disconnected, this time blinking the samsung logo.
It goes to download (DOWN+HOME+POWER) only if usb is disconnected.
It goes to ramdump arm9 mode (UP+HOME+POWER) only if usb connected.
UP+POWER and UP+DOWN+POWER don't work.
heimdall detects it but every dump operation (print or download-pit) ends with:
Claiming interface...
Attempt failed. Detaching driver...
Claiming interface again...
Setting up interface...
ERROR: Setting up interface failed!
Releasing device interface...
Re-attaching kernel driver...
More than a year ago I installed android 2.3.6 using kies (on a friend pc) and rooted it with a script under linux, zRoot or z4root if I remember right, also couldn't install CM Recovery, so it's the stock recovery one but as said before it doesn't work.
I was going to try OneClick Unbrick on it but it's a while I haven't backed up contacts on the phone itself recently, is it going to wipe them out?
I'm going to try to install a non stock rom anyway but not before knowing if it is possible to dump/recover them.
Click to expand...
Click to collapse
Galaxy Mini doesn't support Heimdall, only Galaxy S and later support it.
@stompboxer
U have download mode, rite!! Flash ur country's firmware via odin. Btw, what's ur country??
Sent Via XDA™ Premium
F4uzan said:
Galaxy Mini doesn't support Heimdall, only Galaxy S and later support it.
Click to expand...
Click to collapse
thanks, I didn't know, so I have to use ODIN under windows, right?
Galaxy_Rohit said:
@stompboxer
U have download mode, rite!! Flash ur country's firmware via odin. Btw, what's ur country??
Sent Via XDA™ Premium
Click to expand...
Click to collapse
I'm going to do it for sure, just wanted to know if telephone numbers stored in the phone memory are recoverable someway.
Can you suggest a good rom for it, I did not undestand if CM7 or CM10.1 are ok for it.
Btw, my country is Italy.
stompboxer said:
I'm going to do it for sure, just wanted to know if telephone numbers stored in the phone memory are recoverable someway.
Can you suggest a good rom for it, I did not undestand if CM7 or CM10.1 are ok for it.
Btw, my country is Italy.
Click to expand...
Click to collapse
I don't think that u can backup phone's contacts now.
First flash Italy's firmware via odin. Then flash a suitable custom recovery made for ur mini. Then u can safely flash any custom rom via custom recovery.
Btw, both cm7 & cm10.1 work fine(plenty of them on XDA galaxy mini forum)... u only need to read below posted feedbacks after OP of every rom thread.
My personal preference:- Go for CM7
GT-S5570 Italy(October 2012)
You can also find all kinda samsung official f/w at Samfirmware
Hope this helps...
Sent Via XDA™ Premium
it sure helps, thx.
hi guys, i'm new here, but i follow your forum since forever, so i hope i'm going to find an answer here.
2 days ago i was at my computer, and i didn't realize my gear battery was almost dead. when i looked at my watch to see the time, i realized it was off, so i used my charger, but i noticed it wasn't working. thing is, i haven't been able to turn it on again since. it tried everything i've found on the internet: another cable, remove the internal battery, charge it with a computer, try a soft reset, but nothing worked. i even tried to press the power button while charging, but that didn't work either. its only glimpse of life happens when i connect it to my computer, and windows rings the jingle to tell me that something has been connected to it, but nothing appears, not even in the device manager. i've even downloaded a software in which you can see the history of devices connected to the computer, but it's so fast, that it doesn't leave a trace, just the jingle, and only the connection one, because when i disconnect it, there's no jingle, or better it's rare that it happens. so, before i take it tomorrow to a samsung center, i'd like to try everything i can to solve the situation myself, that's why i asked you. i really hope you'll be able to help me, because i'm quite desperate...i've contacted samsung via email, but i haven't received an answer, i tried the samsung online chat service, but no one picked up... i've read that the battery is too drained to charge again, so it takes time and a lot of luck, but the gears i've read about have been left off for weeks before this problem, while mine has been off for just about an hour. i don't know what to do the revive it...
I woke up to the same problem yesterday. I have tried most of the tricks and none have worked. I don't really want to open it up but might have to.
May i help u?
F1USGP said:
I woke up to the same problem yesterday. I have tried most of the tricks and none have worked. I don't really want to open it up but might have to.
Click to expand...
Click to collapse
NOT EXACTLY BUT IT WORKS SOMETIME..
1.DOWNLOAD SHUAME
2. INSTALL AND REBOOT YOUR COMPUTER.
3.DISABLE ANY ANTI VIRUSE AND FIREWALL , OPEN SHUAME
4.BYPASS THE DIALOGS AND LEAVE SHUAME SEARCH FOR DEVICES OR IT WILL SAY NO DEVICE CONNECTED.
5. NOW CONNECT YOUR DEVICE USING USB,(WHILE PRESSING POWER+DOWN)
IF NOTHING HAPPEN TRY POWER+OTHER COMBINATIONS LIKE UP BUTTON ETC.
YOUR DEVICE WILL START IF NOT LOOK FOR SHUAME WINDOW..
Please HIT thanks if I helped.
Ok I'll try, even though you might know the gear has only the power button... right now everything is worth a try, since I can't take it to a samsung city point, because they're about to close for summer, so they would give it back in September...if I can make it work until then, it's better.
i've downloaded shuame, but it's called rootgenius, but i can't do anything because it's waiting for a connected device, and it has to be on and with the usb debugging mode on, which i can't enable since it won't power on.... i tried to disassemble it and leave it open for a while, then reassemble it, but there was no use... any other suggestion?
When you took the gear apart did you fully remove the battery from the gear?
yes, fully removed. i did exactly what the guy in the youtube video "Inside the Samsung Galaxy Gear Smart Watch. Tear Down, Fix, and Repair."... now i'm trying to leave it connected to the computer, it's about a day and a half now, but nothing yet... i just don't understand why my laptop recognizes the connection of the device, but nothing more...
no suggestions at all, guys?
I have a dead gear too. I'm my case somehow the bootloader got deleted during a gear manager update and won't turn on now. When I hook it up to the PC I get the SEC S5PC210 Test B/D which tells me the device still works but I'm unsure how to get a bootloader back on there. I was on null23. I'm wondering if your issue is the same.
When I had initially updated the gear manager I went to factory reset my gear and couldn't get it to go into recovery which should have clued me into my problem.
Lucky for me my brother in law just got a gear live and gave me his gear1.
tabPRO8.4
ok, i've kinda lost you. i googled the SEC S5PC210 Test B/D but i wasn't able to understand what it is, the only thing i was able to find was an xda page in which someone suggested to download the samsung usb drivers, which i've found out i already had... i don't know whether it could be a possibility that my gear has just erased the bootloader, since it just went dead due to the battery level, and there was no gear manager update that day, i updated 2 days before then. i don't know... the fact that my computer recognizes a connected device should mean that it still works, but i can't understand why it simply doesn't power on and why it is recognized just at the connection, but it's not seen when disconnected. it makes no sense actually... there must be a way to solve this, i really don't believe that samsung just substitute every gear that won't power on, it would turn into a huge waste of gears...
I'm in the same boat; getting the SEC S5PC210. Thought it was the battery; pulled it apart and checked voltages and it seemed fine. Tried like 4 different cables and nothing.
Dead gear recover
Hello guys..
Honestly I never face problem like this before
I just want to help to solve the dead gear issue
U can try this method..
Reply me if this method works.. peace !
I used this method and its working to recover back my GG error issue
I hope this will help u ..
1 - Download and install odin 3.0.9
2 - Download GG stock rom with the last file name *******NE9 ( If the file is zip file , u must extract it first to get the file *******NE9.tar - something like that )
3 - Connect your phone ( must be samsung phone ) . Odin will detect and auto install driver for usb detection. After that disconnect it
4 - Connect your GG to usb ( It will auto detect your GG )
5 - uncheck AUTO REBOOT & REPARTITION
6 - Click PDA button and set to the location you put the NE9 file
7 - Wait for a while and after odin finish checking that file click START BUTTON
8 - Wait until upgrading proses finish
- ( YOUR GG WILL SHOW BLUE COLOR PROGRESS BAR )
9 - Odin will show PASS ! in green color at the status bar if the process success
10 - Disconnect your gear & manually reboot ( press power button about 5 sec )
* sometimes you must reboot 2-3 times to make GG fully reconfigure back it system
* need to unpair/pair again the bluetooth between GG and the phone
* Usually after bluetooth paring success., gear manager will auto update and then u can
use your GG as usual.
That all .. ENJOY YOUR NEW TIZEN ... PEACE !
kofxi said:
Hello guys..
Honestly I never face problem like this before
I just want to help to solve the dead gear issue
U can try this method..
Reply me if this method works.. peace !
I used this method and its working to recover back my GG error issue
I hope this will help u ..
1 - Download and install odin 3.0.9
2 - Download GG stock rom with the last file name *******NE9 ( If the file is zip file , u must extract it first to get the file *******NE9.tar - something like that )
3 - Connect your phone ( must be samsung phone ) . Odin will detect and auto install driver for usb detection. After that disconnect it
4 - Connect your GG to usb ( It will auto detect your GG )
5 - uncheck AUTO REBOOT & REPARTITION
6 - Click PDA button and set to the location you put the NE9 file
7 - Wait for a while and after odin finish checking that file click START BUTTON
8 - Wait until upgrading proses finish
- ( YOUR GG WILL SHOW BLUE COLOR PROGRESS BAR )
9 - Odin will show PASS ! in green color at the status bar if the process success
10 - Disconnect your gear & manually reboot ( press power button about 5 sec )
* sometimes you must reboot 2-3 times to make GG fully reconfigure back it system
* need to unpair/pair again the bluetooth between GG and the phone
* Usually after bluetooth paring success., gear manager will auto update and then u can
use your GG as usual.
That all .. ENJOY YOUR NEW TIZEN ... PEACE !
Click to expand...
Click to collapse
this method doesn't work, because Odin doesn't see the device via USB - no com port
I have the same problem with my gear . No Odin connection.
kofxi said:
Hello guys..
Honestly I never face problem like this before
I just want to help to solve the dead gear issue
U can try this method..
Reply me if this method works.. peace !
I used this method and its working to recover back my GG error issue
I hope this will help u ..
1 - Download and install odin 3.0.9
2 - Download GG stock rom with the last file name *******NE9 ( If the file is zip file , u must extract it first to get the file *******NE9.tar - something like that )
3 - Connect your phone ( must be samsung phone ) . Odin will detect and auto install driver for usb detection. After that disconnect it
4 - Connect your GG to usb ( It will auto detect your GG )
5 - uncheck AUTO REBOOT & REPARTITION
6 - Click PDA button and set to the location you put the NE9 file
7 - Wait for a while and after odin finish checking that file click START BUTTON
8 - Wait until upgrading proses finish
- ( YOUR GG WILL SHOW BLUE COLOR PROGRESS BAR )
9 - Odin will show PASS ! in green color at the status bar if the process success
10 - Disconnect your gear & manually reboot ( press power button about 5 sec )
* sometimes you must reboot 2-3 times to make GG fully reconfigure back it system
* need to unpair/pair again the bluetooth between GG and the phone
* Usually after bluetooth paring success., gear manager will auto update and then u can
use your GG as usual.
That all .. ENJOY YOUR NEW TIZEN ... PEACE !
Click to expand...
Click to collapse
For this error any solution. I can't connect on pc via wireless because I recive error that is blocked. Work only USB connection , I tried but I recived error that don't have driver for connected with USB. How can solve that ?
i was trying to update to tizen my galaxy gear 1 using kies 3 but the update got stuck on 2% and than i disconnected my galaxy gear from my pc . I pressed the power button for a while and then it showed up in download mode so i tried to update it to tizen but this time with odin and that too failed and now my galaxy gear is just showing dots and lines of random colors. and now nor kies 3 ,2 or odin are detecting it.. Please help help needed
thanks
jordan235 said:
i was trying to update to tizen my galaxy gear 1 using kies 3 but the update got stuck on 2% and than i disconnected my galaxy gear from my pc . I pressed the power button for a while and then it showed up in download mode so i tried to update it to tizen but this time with odin and that too failed and now my galaxy gear is just showing dots and lines of random colors. and now nor kies 3 ,2 or odin are detecting it.. Please help help needed
thanks
Click to expand...
Click to collapse
if you reboot by holding the power for like 10 sec, can you get to recovery? Or download mode?
noellenchris said:
if you reboot by holding the power for like 10 sec, can you get to recovery? Or download mode?
Click to expand...
Click to collapse
No just random colors as I mentioned please help
jordan235 said:
No just random colors as I mentioned please help
Click to expand...
Click to collapse
Hmm, does it charge? It may have been bricked. If there is no chance of returning it or warranty then I'm not sure what to do. Since it seems it's been this way for a few days, you may have to be creative. I've had mine fail a few times via Odin and after a few times holding the power I would get back to the kies screen on the Gear which I would try to fix in the recovery part of kies and that would not work since I wasn't installing the update via Kies. But moral of the story was after trying to see the gear in kies and failing, I again tried with Odin 3.09 and it would see the device again. Where I loaded the Odin version which failed, then rebooted gear and tried 2nd time and closed my eyes.. and it loaded. I would make sure nothing is running in the background ( 1st fail I noticed windows detecting device halfway through Odin flash and that caused my issue).
Also if you have another device like a samsung phone, you may see that device in Odin (only suggest this as a way to test if Odin and windows drivers for samsung device are loaded). But hopefully with some reload of the drivers on you computer (on that....try another computer if possible) you will have some success.
If you try all that and it's a no go and still crazy colors and lines.....only thing I can think of is to let battery die and then connect charger and see if it charge's or goes to charge screen. Let me know if you can get to anything else...
Chris
jordan235 said:
No just random colors as I mentioned please help
Click to expand...
Click to collapse
Ditto - rushed into the update before reading up properly and ending flashing with latest Tizen when I should have used the older version with boothloader. Thought I'd recovered the situation when I managed to flash with Android 4.2.2, Odin showed as completed but the Galaxy Gear continued to be stuck on the downloading screen albeit with a download bar showing however it did not reset. Switched it off after a while and then that's when the corrupt screen started and failure to be recognised by the pc
Any help would be appreciated before it hits the bin.............
Binda69 said:
Ditto - rushed into the update before reading up properly and ending flashing with latest Tizen when I should have used the older version with boothloader. Thought I'd recovered the situation when I managed to flash with Android 4.2.2, Odin showed as completed but the Galaxy Gear continued to be stuck on the downloading screen albeit with a download bar showing however it did not reset. Switched it off after a while and then that's when the corrupt screen started and failure to be recognised by the pc
Any help would be appreciated before it hits the bin.............
Click to expand...
Click to collapse
Did the same, reflashed STOCK 4.4.2 (has to original it came with) and restored android. Then updated to NE9 rom then to NF1... Unfortunately the NF1 rom needs some base files installed in NE9. Can't just jump to lastest...
Then rooted it...
How to unbrick galaxy gear !
Hello friend.. ( u can try this method to unbrick your GG )
Previously im also got the same problem as u when im trying to upgrade my GG1 but after a long search i found this link . What u need is just follow the instructions as given and the important things is dont try to skip anything !
How to UnBrick Galaxy Gear: h*t*t*p://youtube/fS4878klPAQ
( delete * from h t t p coz im not allowed to post link yet )
I hope this will help u coz my GG1 has been recover back .. not to original stock rom but it also upgrade my GG1 to TIZEN !!! :good:
And dont forget to thanks to that guys that send the video and me ( coz i need a credit to post another reply to whom that need a help ) and good luck to u all.
AND TO ADMIN : PLEASE DO NOT BANNED ME COZ IM JUST TRY TO HELP SOMEBODY THAT HAS THE SAME PROBLEM WITH ME .... PEACE !
thanks for posting....will give it a try
update: no joy - pc or odin fail to detect the Galaxy Gear when connected via USB
Try this.. maybe it can help
1 - close odin
2 - connect your samsung phone first with the pc via usb cable
* ( pc will detect your phone and auto install usb driver for it )
3 - disconnect your phone
4 - open odin
5 - connect your GG with odin via usb cable that you use to connect your phone to pc
6 - Repeat back the instruction as given
This happen to me before.. but its works for me
*( sorry to forgot to mention that situation ) ... peace
I've got the same problem with my Gear. Screen with random colored dots and lines. Did anyone find a way to fix this? Any help is appreciated.
Did you get this fixed?