Hi Guys!
Compliments for your forums. It's a very great work that you are doing here!
I hope it's not a duplicate topic. If it's so, my excuses for that!
I've downloaded that program Kingo Root V 1.2.3.2051, to unroot my S3-mini which have the rom I8190XXANC2 Vodafone Italy
After I started the program and connected the device, I had a doubt, so after few seconds that the program was communicating, I turned off my router, so internet was unavailable.
Then I had to wait 1 minute more till the program said that my device is unsupported, anyway it asked me to press the button "ROOT" .
I did nothing, then I closed the program and disconnected the phone.
Now searching with Google, I found out that this program may harm in some ways, so now I am worried, maybe I shouldn't but hehe you know....
The phone doesn't seems to have new apps installed neither to act weird, so now I ask myself, was able this program to modify or install something in the phone?
Either this answer is positive or not, at this point I would like to do what was my intent: Reset to default, unroot just this ROM version without remove anything (unwanted Vodafone apps), only unroot it and add the Supersu APP; nothing else. Then I can decide later what to keep or what to remove.
I searched a lot in your forums before write this topic, but I found only an extreme "tweaked" version, which isn't my goal.
Another thing that I don't understand is why I see more than one files to flash in the device, seems like it's the operating system, the modem binary, and the kernel? I understood well? It's obligatory to upload all three? Which sequence order?
You mention some applications which helps to upload the roms as like Odin, twrp2.7, I may be wrong, but don't seems that you have a specific topic or an updated download section. I am afraid to search in Google and maybe find some fake versions around with includes malware.
Sorry for all that questions, but I am very new to this Android world. To start for good I need some guidance. I hope you can help me somehow.
Thank you very much.
Flash framework in odin
send for I8190N CM11 using XDA Premium 4 mobile app
Thank you for the reply, Pang34, but I still don't know what I have to do and what I have to download.
Download framework from http://samsung-updates.com/device/?id=GT-I8190,and then download Odin v3.07,then open Odin via computer,power off your phone,power button+home button+vol down(download mode),use your cable connect to your computer,flash framework
send for I8190N CM11 using XDA Premium 4 mobile app
pang34 said:
Download framework from http://samsung-updates.com/device/?id=GT-I8190,and then download Odin v3.07,then open Odin via computer,power off your phone,power button+home button+vol down(download mode),use your cable connect to your computer,flash framework
send for I8190N CM11 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
dead link
http://samsung-updates.com/device/?id=GT-I8190
send for I8190N CM11 using XDA Premium 4 mobile app
Thank you for the instructions and the links. From the samsung-updates I can download my original ROM and then with Odin restore my S3mini as factory mode. This may help to get rid of possible "some unwanted changes" done my the tool mentioned in main topic. :good:
My next step is to gain the root access in the original ROM which is I8190XXANC2 OMN, and I dont desire to flash with too much tweaked versions, if possible. The ROM must stay as most close possible like the original, but with the root access.
Any help is very appreciated .
Related
I Just Bricked My Samsung Galaxy Ace - I Switch it On and It Shows Samsung Logo Forever and Im Stuck There. I Can Still Access Recovery and Download Mode Though
If Im Not Wrong, I Bricked It By Deleting Certain System Files, Is There A way to Restore The System Files via Download Mode or Recovery Mode ?
* I Deleted Samsungbootloop.qmg, And The Next time I Booted, This Happened. Could it Be A Cause ? I've Read other Forums About this File, and It Seems Like it Doesnt Brick the Phone If Deleted
Btw, My Phone Model Is GT-S5830i
U only shot is to flash through odin dont worry nothings wrong yet ...your phone is not even close to being bricked try rom manager and report rom manager is the best brick tool out there
Flash Through Odin ? You Mean Flash My Stock Firmware?
Try Rom Manager ? But I Cant Even Use The App on My Mobile?
Im Actually Quite New To Android, Cant Really Grasp What You're Saying
kyrogex said:
Flash Through Odin ? You Mean Flash My Stock Firmware?
Try Rom Manager ? But I Cant Even Use The App on My Mobile?
Im Actually Quite New To Android, Cant Really Grasp What You're Saying
Click to expand...
Click to collapse
I was just kidding dude
dont use Rom Manager it will brick your phone
Why dont u google a bit ? There are many Odin tutorials out there on you tube
Yes i mean u should flash your stock rom through odin ..
And dont worry we are here to help you ...so can u google?
Thanks For The Help So Far,
I Thought About Flashing My Stock Firmware, But Does it Include Restoring System Files?
Yea I Googled Before Opening This Thread
kyrogex said:
Thanks For The Help So Far,
I Thought About Flashing My Stock Firmware, But Does it Include Restoring System Files?
Yea I Googled Before Opening This Thread
Click to expand...
Click to collapse
Yes ...your system files will be restored but your data will get wiped off then again beggers cant be choosers ...
Download your stock rom at samfirmware.com ...odin youll find anywhere ...
Doesnt Matter, I Only Used My Phone For Abt 3 Wks Now... No Important Infomation Inside
Haha Cool! Got Odin v1.85 Working on My Computer, Just Wondering About The Firmwares... Does CSC and PDA Matter ?
So I've Connected My Phone To The Computer, While My Phone Is In Download Mode. My Computer Cant Seem to Install the Driver, Can I Still Use Odin ?
*Sorry I know I Ask Alot Of Qns, But I Just Wanna Be Extra Careful
No problem its good to be careful than be sorry
No u cant proceed until odin shows that "yellow box " .
About your pc not recognizng your phone you should have the samsung usb drivers ull find them at samfirmware.com
And also when u use odin u must "run as admin " or "run as vista executable( i hope u have seen some odin tutorial ) first keep odin open then connect your phone
I m sorry for the late replies...i know how excited/ sad u are ..please bear with me
You know you are rooted when you use XDA more than FB
I dont know about csc and pda . Whenever i flashed it was always a " one package " file ...google it ...dont worry u cant brick your phone via odin unless you flash a rom not meant for your phone xD
You know you are rooted when you use XDA more than FB
Dragonoid said:
U only shot is to flash through odin dont worry nothings wrong yet ...your phone is not even close to being bricked try rom manager and report rom manager is the best brick tool out there
Click to expand...
Click to collapse
why is rom manager on market etc. if it bricks? I even seen posts on this site people using it.
You Must Have Been In The Same Situation as I Am Right Now Before ( About The Excitement And All )
Your Right About That, Im Waiting For Your Replies, However Dont Feel Sorry... You're Already Helping Me ! And Its Not Like Waiting For Your Replies Are Unbearable. Im Guilty For Doing The Same Right? Replying Late
Yea It Does Come Out The Yellow Box, Odin Can Detect My Phone. But About The Firmware, Does CSC and PDA Matter?
kyrogex said:
You Must Have Been In The Same Situation as I Am Right Now Before ( About The Excitement And All )
Your Right About That, Im Waiting For Your Replies, However Dont Feel Sorry... You're Already Helping Me ! And Its Not Like Waiting For Your Replies Are Unbearable. Im Guilty For Doing The Same Right? Replying Late
Yea It Does Come Out The Yellow Box, Odin Can Detect My Phone. But About The Firmware, Does CSC and PDA Matter?
Click to expand...
Click to collapse
Dont think so use pda it sounds better
You know you are rooted when you use XDA more than FB
chrcol said:
why is rom manager on market etc. if it bricks? I even seen posts on this site people using it.
Click to expand...
Click to collapse
Rom Manager is compatible with some phones..not with Ace ...though i have heard that now the compatibilty is improved ...
I have bricked my phone using Rom manager too ( i was a noob then flashed the wrong recovery luckily for me the service centre guys repaired it for me ) ...
and i think you are late you have not seen the many threads that were here due to Rom manager bricking
You know you are rooted when you use XDA more than FB
-____- dude you could have googled check my screenshot and always always always remember
GOOGLE B4 YOU ASK SOMETHING
GOOGLE is your best friend
You are lucky i m in a good mood any other day i would have not cared to reply to such questions...
You know you are rooted when you use XDA more than FB
And read this if u want to know about any more terminology
http://galaxy551.wordpress.com/2012/01/08/the-stock-rom-and-odin-thread/
You know you are rooted when you use XDA more than FB
Lol Wow I Did Google Before I asked, Just That They Gave me A Bunch Of Stuff That my Brain Couldnt Comprehend
So Now, I Have Downloaded The Stock Firmware and It Seems Like There is Only One File, Unlike In Tutorials Which Have the CSC PDA MODEM File. So I Dont know How to Use The File in Odin.
I Have Seen Tutorials Where The Stock Firmware Consist Of One File Like Mine Also, Where They Input That One Big File Into The PDA Slot. However Mine Doesnt Seem To Work.
There Could Be Afew Outcomes While Flashing that One File into PDA with Odin ( The message in Odin, Telling me what it is doing currently)
1. Setup Connection... ( And Then Stucks There )
2. Flash Failure
Mind Helping Me Abit, Seems Disastrous Lol.. Much Thanks
I think yours is a "one package " file ...there is an option in odin ..tick it and navigate to the file
You know you are rooted when you use XDA more than FB
Dragonoid said:
I think yours is a "one package " file ...there is an option in odin ..tick it and navigate to the file
You know you are rooted when you use XDA more than FB
Click to expand...
Click to collapse
Agree. Put that file in the bottom right line and go on! You've almost done it.
I can't resist of asking you why are you using capital letters on every word?
Sent from my Ace using XDA
TheArt. said:
I can't resist of asking you why are you using capital letters on every word?
Sent from my Ace using XDA
Click to expand...
Click to collapse
Lol yeah i didnt notice that untill u pointed out
You know you are rooted when you use XDA more than FB
So I've Downloaded Many Versions Of Odin3 and Odin Multi Downloader Cause So Many Of Em Dont Work for Me
All Versions for Odin Multi Downloader ( Even 4.38, A Version For The Ace )
- Cant Detect My Phone
Odin3
- Has The Yellow Box When I Plug In Phone
- However, It Justs Stucks There Forever as The Message Says SetupConnection...
Lol Cause Typing Like These Looks Awesome To Me
guy pls help me to root 2.3.6 p1000 user.
i use z4root and superone click and doomlordv4
all of them is not working so pls help me..
I succesfuly rooted 2.3.6 JQ9 in 3steps. I flashed JQ1 stock firmware, then i have rooted with DooMLord method v4, after that i instaled Mobile Odin paid version from market, i flashed JQ9 stock firmware with Mobile Odin. Mobile Odin cannot root my tab but i have rooted with DooMLord method v4. Sommehow Mobile Odin Injected sommething and zergrush can find a way to root.
Sent from my GT-P1000 using XDA App
sir
sir can u give me a exact instruction to root ur p1000 please
thank you sir...
marvz098 said:
sir can u give me a exact instruction to root ur p1000 please
thank you sir...
Click to expand...
Click to collapse
There is plenty of info and guides for you on site, Stop been lazy and impatient, Go and do some research and search forums instead of expecting somebody to bring the info to you.
You will learn more and retain the info if you put some work into it and read.
go download unlockroot - http://www.unlockroot.com/
make sure you set your device to Enable USB Debugging.
Press Root from the program and wait for the magic to happen.
worked
Thanks very much quite easy.
You Mr. so called ATHEiST are an idiot and do not belong in a forum!
TheATHEiST said:
There is plenty of info and guides for you on site, Stop been lazy and impatient, Go and do some research and search forums instead of expecting somebody to bring the info to you.
You will learn more and retain the info if you put some work into it and read.
Click to expand...
Click to collapse
What is wrong with you!!! Are you frustrated or do you have a huge complex and didn’t mammy give you enough attention??? You can’t wait to put people down are you, he is asking a question and did it very polite he tried it with several solutions and it did not work so he tried, it is absolutely not necessary to say that he is lazy and impatient, your here a long time and all i read from you is bashing people, why don’t you just shut up if you are not helping people and leave it to people that have no problem answering such a question, nobody is waiting for your stupid remarks. You ATHEiST are an idiot and do not belong in a forum!
You can also go for the CFROOT. OR use the overcome method by teamovercome. You just need to put your tab in download mode, and get the necessary files from TEAMOVERCOME. Although, when you do this, you will get a customer ROM installed, the overcome 7 v4.1.0 running on android 2.3.6 fully rooted.
2.3.6 root info
tried many methods, here're my results, hope this helps...
going from gb 2.3.3 rooted with cf root ...to 2.3.6 with cf root.
(all firmware from "check fus 2.1")
uk(02)...JQ8 -not easy!
eventual success, method mentioned in last page of linkost #342
http://forum.xda-developers.com/showthread.php?t=885734&highlight=tab+cwm3
Poland play... JQ9 -easy!!
used pc version 'odin3 v1.7' to flash firmware, then again to flash 'cf root kernel' (same one as in the above 'xda' link).
result -all good
tried using mobile odin pro first but had probs.
if all else fails, you could try, team overcome's custom rom, i tried that too but didn't like their version of cwm, so was determined to get chainfire's original working.
fongnd said:
go download unlockroot - http://www.unlockroot.com/
make sure you set your device to Enable USB Debugging.
Press Root from the program and wait for the magic to happen.
Click to expand...
Click to collapse
Thanks this worked for me on a galaxy tab with 2.3.6 firmware
fongnd said:
go download unlockroot - http://www.unlockroot.com/
make sure you set your device to Enable USB Debugging.
Press Root from the program and wait for the magic to happen.
Click to expand...
Click to collapse
AMAZING SOFTWARE !!! , but after rooting ... I didn't have the "TERMINAL EMULATOR" to use ... By the way i'm working on linux system :laugh: , without terminal, how do i use linux command for installation, editing , and reflashing? ... May i download terminal
P1000 and I am under Linux
I am under Linux, bored of windows, and i want to root my tab "Samsung Galaxy Tab P1000. Unlockroot doesn't work. what can i do under Linux, no Odin, NO Soft found, except eventually heimdall, but i am too newbee for using it, and newbee under Linux.... so if you can help me, i will be glad.
I search for two days in different forums and i am still dry no solution in my sight !!!!!
Thanx for helping me
An old man retired
Robby
It is easier just to install a pre rooted Rom than to root your current Rom.
Sent from my GT-N7100 using xda app-developers app
Sorry for the long thread but please read and help me !
Sorry moderators i tried looking for my post didnt find where you placed it. so making a new and clear where i'll tell what i ve done to my tablet.
firstly my p1000 was froyo 2.2 and i didnt checked that and tried to upgrade it to jelly bean, that was the first stupidity of my.
while doing that i faced many problems and concluded that it was brick.
how ever i had rooted my phone with super one click root..
later when it was bricked i again rooted it with cwm recovery by help of cmd.
then it was more complex, i then tried to roll it back and installed the firmware but the firmware i installed was wrong region again it went more complex.
then from some thread, i again used odin and pit it and installed some other firmware. that didnt work so i did something with heimdall suite as it was instructed and mess something with zImage thing.. all failed.
now i ve finally came up with no solution and thinking what the mess i ve done.
please help me.
now odin dont recognize the phone.
the phone is booting till the samsung welcome screen i can also listen the sound.
it also goes to cwm recovery screen and also goes to downloading screen.
please tell me a way so that it can go to normal i am happy with 2.2 froyo only.
tell me a way, please give me download links so that i dont mess it again.
remember odin not accepting it, i ve charged the phone fully and also installed the samsung usb drivers but its not helping..
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
yes, i am sure it is because of heimdall suite,..
thanks a lot you are so helping i will be posting here only now
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
AvRS said:
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
Click to expand...
Click to collapse
i am really really sorry for all the inconvenience ,
i was a bit shocked as my tablet got bricked, so made such silly posts and created the problems.
but thanks for understanding my conditions.
priyana said:
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i would like to give you a big big big thanks for helping me out..
this forum is the best forum over the web as i got my problem solved,
not only helped me to unbrick my tablet but also now its upgraded to 4.1 jelly beans.
Priyana without you my tablet would be ended with a hard brick.
Thanks a lot.
No network !!
after all the hard work and all flashing thing, i upgraded it to Android 4.1.1 Jelly Bean via CyanogenMod 10
but now the problem is i cant find the network ..
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
glussier said:
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
Click to expand...
Click to collapse
i am sorry for not being clear, i was talking about the mobile network.
i searched on forum, and what i understand is i have to copy modem.bin file to data/vendor.
but i dont know which modem file to copy.
You can extract modem.bin from the rom that you have downloaded.
uryv
glussier said:
You can extract modem.bin from the rom that you have downloaded.
Click to expand...
Click to collapse
i did that... but still not able to make any calls. my sim card is working on other phone though.
have tried flashing modem.bin and also tried copy and paste in vendor folder.
but its not working searching all over the forum but i dont know what to do
Settings>about tablet>Status> Service state : out of service / Mobile network state : disconnected / MDN : unknown
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
in gb stock safe, it was jpz modem file.. which i used to flash and it was flashed very well and there was no problem in anything.
later on when i upgraded for 4.1.1 it was also installed normally with no problem the only problem i encountered is i cant make any calls from it.
even the imei number is changed of my phone.
i also sticked the file in system/vendor .. i tried with the both file the jpz which i had from gb stock file and another from the firmware.
well now i trying to go for the latest cyanogen 4.1.1 hope everything get normal in it, and try to stick file in radio.
can you tell me particularly which file to copy and where ?
in gb stock jpz worked fine.. should i go for it ?
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
priyana said:
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
Click to expand...
Click to collapse
hmm yea you were right.. and it was stupid of me i was using a old version cyanogen.. it downloaded the latest nightly and it worked fine..
but i think something google apps that.. the apps are limited as earlier i used to keep on scrolling and the apps list was like infinite now it seems as there are just 200 apps in it..
give me a link of latest gapps file plzz
Gapps only a few apps in it.
http://goo.im/gapps
Choose correctly, ics or jb.
Sent from my GT-P1000 using xda app-developers app
Pardon me if I posted on wrong section, and if this question has been asked too much.
Iam new to samsung android phone, moving from my xperia 2011 lost phone.
Regarding root, anyone had found a method like galaxy young methods?
Via update.zip I mean...
And why we cant flash them on this device?
Maybe someone had a problem with play store.
If we open an app screenshot, and slide it, this phone will vibrate, then the screenshot's gallery will close.
Then back to app's page.
I dont know which one was the problem, phone firmware, playstore, or my phone hardware?
Can anyone help me?
this one use flashable zip
http://forum.xda-developers.com/showthread.php?t=2030758
also look for squadzone AIO here:
http://forum.xda-developers.com/showthread.php?t=1768622
physcodelic said:
If we open an app screenshot, and slide it, this phone will vibrate, then the screenshot's gallery will close.
Then back to app's page.
?
Click to expand...
Click to collapse
i got that problem, it's first and not last bug in this phone
dont worry its not a big problem, stop using full screen photos in play store and problem gonna out.
Mini 2's stock recovery only allows Samsung signed .zips to be flashed. So you must have a custom recovery to root
That's all the answer
Can I ask more question?
So we need Samsung signed zip file, right?
Is it possible if we steal those zip from Samsung OTA update file?
Like CWM signed zip file maybe...
Adding root file...and edit the script, something like that?
Just asking, maybe I should read more about samsung's android articles...
Its shame there are no update for our phone till now tho... T.T
This forum community never let me down. Thank guys
Note : Admin, please move my thread to mini 2 general/FAQ section if they had been created.
to root you must flash CWM (squadzone/mb14) using odin, and flash root using those CWM
or
you can search for pre-root stock rom and flash it via odin
btw since you are indonesian, why you didn't join galaxy mini 2 facebook group where indonesian user discuss about this device:
https://www.facebook.com/groups/galmin2/483580928371144/
hey everyone...this is my first post on xda, i need a little help with my sisters in laws phone. basically shes got some crazy ex who has rooted her phone and im trying to fix it for her since hes making her life difficult. i can tell he has a custom bootloader installed. when i boot into recovery its odin not the normal bootloader. i can still boot into download mode but the phone wont boot up...when it does it just says that the firmware update encountered a problem and to use kies in recovery. im not super technically saavy but have flashed a tablet or too. nothing major. any help would be greatly appreciated. i just want this thing back to stock bootloader and firmware like when it came from att. does that sound like its possible. i tried to use some write ups i found online to rewrite the stock firmware and thats when it quit booting up. thanks in advance for any help people!
wigglesrewind said:
hey everyone...this is my first post on xda, i need a little help with my sisters in laws phone. basically shes got some crazy ex who has rooted her phone and im trying to fix it for her since hes making her life difficult. i can tell he has a custom bootloader installed. when i boot into recovery its odin not the normal bootloader. i can still boot into download mode but the phone wont boot up...when it does it just says that the firmware update encountered a problem and to use kies in recovery. im not super technically saavy but have flashed a tablet or too. nothing major. any help would be greatly appreciated. i just want this thing back to stock bootloader and firmware like when it came from att. does that sound like its possible. i tried to use some write ups i found online to rewrite the stock firmware and thats when it quit booting up. thanks in advance for any help people!
Click to expand...
Click to collapse
Scroll down to the notes section in the OP of this link. http://forum.xda-developers.com/showthread.php?t=3149146
Grab ye file from step for and follow instructions. If she is rooted then this will work. It'll take her back to 4.4.2 unrooted.
dirtydodge said:
Scroll down to the notes section in the OP of this link. http://forum.xda-developers.com/showthread.php?t=3149146
Grab ye file from step for and follow instructions. If she is rooted then this will work. It'll take her back to 4.4.2 unrooted.
Click to expand...
Click to collapse
Thanks for taking the time to help with this issue. that file didnt work, i flashed the G900A_OC4_Stock_Partitions firmware and its at least working again. thanks again to everyone who looked and especially dirtydodge for taking time.
Phone is working again guys but was wondering if anyone knows why it keeps giving me this security notice pop up...says that unauthorized actions have been detected and gives me the option to restart or cancel. Sounds like it has something to do with KNOX from my searching. Trying to solve this without rooting. When i check the KNOX counter in D/L mode it says 0x0. Ive updated firmware and security updates to latest versions and it hasnt helped. Anyone have any pointers? As always any help is greatly appreciated. Searched around the web and xda and didnt find what i was looking for.
@wigglesrewind. Chances are is that the phone is still rooted and that's why your getting the notification. Go to the pay store and download "root checker" and see what it says. Also what is your version & baseband. I'm not sure why the "downgrade to nce" file didn't work for you. It might have been a bad download but you should be able to use it if your still on 0C4.
Thanks again dirtydodge for contributing. I did a check with root checker and it says root is not installed. Also used terminal emulator and get a dollar sign in the terminal, not the hash tag. Any ideas?
wigglesrewind said:
Thanks again dirtydodge for contributing. I did a check with root checker and it says root is not installed. Also used terminal emulator and get a dollar sign in the terminal, not the hash tag. Any ideas?
Click to expand...
Click to collapse
I'm not familiar with terminal emulator. The only time I've ever gotten the notification that you talking about is when i have root apps on the phone and certain things aren't froze. But you need to be rooted and have titanium backup to freeze them. What version is on the phone.
Sorry, forgot to add that in the last post...
Baseband version oc4
Kernel 3.4.0
Build number LRX21T.G900AUCU4BOF3
Let me know if you need any other info. Like i said im not very experienced in this
But thanks again for your help. Its greatly appreciated.
wigglesrewind said:
Sorry, forgot to add that in the last post...
Baseband version oc4
Kernel 3.4.0
Build number LRX21T.G900AUCU4BOF3
Let me know if you need any other info. Like i said im not very experienced in this
But thanks again for your help. Its greatly appreciated.
Click to expand...
Click to collapse
Ok well it sounds like your on the latest firmware version. The phone may still have a trace of root somewhere. After you flashed the oc4 Kernel did you do a factory reset. Other than that I'm not sure what to do. But that does explain why you can't use the "downgrade to nce" file. The oc4 build can not be downgraded. I'd do a factory reset from the stock recovery menu and then wipe the cache. If that don't fix it then I'm out of options. Lol. Hope this helps.
Ive tried everything you mentioned except wiping the cache so I'll give that a try. Cross your fingers for me!
you flashed oc4 firmware which is why your baseband is oc4 (baseband is modem.)
What you need to do is download and odin a full odin tar file.. this will wipe everything clean and make it brand new...
Sent from my SM-G925V using XDA Free mobile app
If i were to find a full tar file would i just use the ap box in odin or would i have to do it differently? Usually those full dowloads have multiple files in them (BL and whatever the other ones are... CS maybe? Cant remember and not near the computer right now. Is that what your talking about?
wigglesrewind said:
If i were to find a full tar file would i just use the ap box in odin or would i have to do it differently? Usually those full dowloads have multiple files in them (BL and whatever the other ones are... CS maybe? Cant remember and not near the computer right now. Is that what your talking about?
Click to expand...
Click to collapse
Yup.. youre build is of3 or w.e which to my knowledge not downgradeable.. if you dont plan on keeping it rooted then you can flash latest full tar in odin using the AP slot..
I would recommend trying the oc full tar first if you plan on rerooting it.. the full tar will have multiple files including system, csc, boot etc.
Sent from my SM-G925V using XDA Free mobile app
Thanks alot! I'll find a full tar on here and odin it and see if that fixes it
does anyone have that oc4 one click file or know where i can find it. see it in my searchs but its always the same google drive share and they all say the file doesn't exist.
what do you mean one click?
elliwigy said:
what do you mean one click?
Click to expand...
Click to collapse
G900AUCU3BOC4_OneClick..exe was the file name i kept coming across with links to a google drive account but the file is no longer on there. I'll keep looking. I appreciate you guys lending a hand. I know it can be frustrating trying to help someone with limited understanding of something remotely. You guys are great.
wigglesrewind said:
G900AUCU3BOC4_OneClick..exe was the file name i kept coming across with links to a google drive account but the file is no longer on there. I'll keep looking. I appreciate you guys lending a hand. I know it can be frustrating trying to help someone with limited understanding of something remotely. You guys are great.
Click to expand...
Click to collapse
i understand.. just dont know if thatll work for you lol.. you need a full odin tar.. the one click might just be for root.. try to find a full oc4 tar file