Hi everyone. I have one issue with my HTC One (Nextel Mexico).
I followed the steps to the letter but my HTC One stopped booting when I updated the firmware version 2.24.599 to 5.11.1540.9
Before I tried with versions 2.x but the model and the CID number did not match:
modelid: PN0713000
cidnum: HTC__332
After, I can send by "adb sideload" method "Android Revolution HD 71.1" ROM but HTC One do not boot anyway.
Another information:
-Unlocked with htcdev.com (S-ON).
-Custom recovery ClockworkMod Touch v6.0.4.6
-I tried to flash one more time with "Android Revolution HD 71.1" ROM and de insallation did stop at 30%.
-When I did update firmware, the progress bar did not finish never but the versions changed.
Someone can help me please? I'm very sad.
Thanks on advance.
Wrong thread, delete
huleeyo said:
Hi everyone. I have one issue with my HTC One (Nextel Mexico).
I followed the steps to the letter but my HTC One stopped booting when I updated the firmware version 2.24.599 to 5.11.1540.9
Before I tried with versions 2.x but the model and the CID number did not match:
modelid: PN0713000
cidnum: HTC__332
After, I can send by "adb sideload" method "Android Revolution HD 71.1" ROM but HTC One do not boot anyway.
Another information:
-Unlocked with htcdev.com (S-ON).
-Custom recovery ClockworkMod Touch v6.0.4.6
-I tried to flash one more time with "Android Revolution HD 71.1" ROM and de insallation did stop at 30%.
-When I did update firmware, the progress bar did not finish never but the versions changed.
Someone can help me please? I'm very sad.
Thanks on advance.
Click to expand...
Click to collapse
you have flashed the developer edition firmware (.1540) over a .599 version
where did you get the firmware from? please provide a link
arhd must be flashed using twrp 2.6.3.3 not CWM.
Not sure what you are trying to do and why you have flashed the bad firmware version on your phone....
Thanks.
alray said:
you have flashed the developer edition firmware (.1540) over a .599 version
where did you get the firmware from? please provide a link
arhd must be flashed using twrp 2.6.3.3 not CWM.
Not sure what you are trying to do and why you have flashed the bad firmware version on your phone....
Click to expand...
Click to collapse
Thanks so much for your help bro. I appreciate it.
I flashed it with this version because I did not found .599 versions and the 2.x versions do not match with CID number.
I searched it in this link:
Code:
http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC%2FHTC_One%2F
And I used this firmware:
Code:
http://xda7.androidrevolution.org/db_mirror/Firmware/HTC/HTC_One/1540/5.11.1540.9.zip
I can change to TWRP, but I don't know with which firmware I should flash it.
Thank you!
huleeyo said:
Thanks so much for your help bro. I appreciate it.
I flashed it with this version because I did not found .599 versions and the 2.x versions do not match with CID number.
I searched it in this link:
Code:
http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC%2FHTC_One%2F
And I used this firmware:
Code:
http://xda7.androidrevolution.org/db_mirror/Firmware/HTC/HTC_One/1540/5.11.1540.9.zip
I can change to TWRP, but I don't know with which firmware I should flash it.
Thank you!
Click to expand...
Click to collapse
please post a "fastboot getvar all" (excluding IMEI and s/n), and do not flash the .1540. firmware
nkk71 said:
please post a "fastboot getvar all" (excluding IMEI and s/n), and do not flash the .1540. firmware
Click to expand...
Click to collapse
I flashed with that firmware yesterday
C:\Users\YAZMIN\Desktop\platform-tools>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1540.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: HTC__332
(bootloader) battery-status: good
(bootloader) battery-voltage: 4287mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.294s
Thank you.
huleeyo said:
I flashed with that firmware yesterday
C:\Users\YAZMIN\Desktop\platform-tools>fastboot getvar all
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-main: 5.11.1540.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0713000
(bootloader) cidnum: HTC__332
Click to expand...
Click to collapse
Are you able to unlock bootloader?
nkk71 said:
Are you able to unlock bootloader?
Click to expand...
Click to collapse
Yes, actually is unlocked (S-ON unlocked by htcdev.com method).
huleeyo said:
Yes, actually is unlocked (S-ON unlocked by htcdev.com method).
Click to expand...
Click to collapse
ah ok, consider yourself lucky, because quite a few users used the .1540. firmwares, and were unable to get unlocked again
now just flash TWRP 2.6.3.3 and install the ROM of your choice, here is some more detailed info: http://forum.xda-developers.com/showpost.php?p=53270352&postcount=21
consider yourself lucky your phone even switches on after flashing the wrong firmware and that you don't have a nice shiny new paperweight, once you've got a custom rom on there, get s-off as soon as possible and change your CID and MID to match the firmware you flashed.
nkk71 said:
ah ok, consider yourself lucky, because quite a few users used the .1540. firmwares, and were unable to get unlocked again
now just flash TWRP 2.6.3.3 and install the ROM of your choice, here is some more detailed info: http://forum.xda-developers.com/showpost.php?p=53270352&postcount=21
Click to expand...
Click to collapse
Wow! A good news! Thank you.
Should I change to "TWEP" by "adb sideload" with "CWM"? Because I can't switch it with "adb reboot bootloader" and "fastboot flash recovery recovery.img" in bootloader or fastboot.
Thank you a lot.
huleeyo said:
Wow! A good news! Thank you.
Should I change to "TWEP" by "adb sideload" with "CWM"? Because I can't switch it with "adb reboot bootloader" and "fastboot flash recovery recovery.img" in bootloader or fastboot.
Thank you a lot.
Click to expand...
Click to collapse
Why can't you flash recovery using fastboot commands?
SaHiLzZ said:
Why can't you flash recovery using fastboot commands?
Click to expand...
Click to collapse
Yes, I did it as you say:
Code:
fastboot flash recovery twrp.img
fastboot erase cache
fastboot reboot-bootloader
Now I have TWRP 2.6.3.3 but how can I send rom.zip to this recovery? Something like "adb sideload"?
Thanks.
EDIT: Sorry, I found adb sideload yet. Loading...
huleeyo said:
Yes, I did it as you say:
Code:
fastboot flash recovery twrp.img
fastboot erase cache
fastboot reboot-bootloader
Now I have TWRP 2.6.3.3 but how can I send rom.zip to this recovery? Something like "adb sideload"?
Thanks.
Click to expand...
Click to collapse
I don't get it, why nobody wants to read
E) If the ROM is no longer on your phone
then you can use one of three methods:
1- OTG cable
2- adb push <name of rom>.zip /sdcard/
3- initiate sideload in custom recovery, then adb sideload <name of rom>.zip
example of adb push is also there
nkk71 said:
I don't get it, why nobody wants to read
E) If the ROM is no longer on your phone
then you can use one of three methods:
1- OTG cable
2- adb push <name of rom>.zip /sdcard/
3- initiate sideload in custom recovery, then adb sideload <name of rom>.zip
example of adb push is also there
Click to expand...
Click to collapse
Sorry for that. I was concerned and I asked you before I read.
Now, Thanks to you I recover my smile.
Apparently the device is operating normally except for the 4G connection. I see only connection H.
Maybe a firmware changes affected this?
Thank you so much!
huleeyo said:
Sorry for that. I was concerned and I asked you before I read.
Now, Thanks to you I recover my smile.
Apparently the device is operating normally except for the 4G connection. I see only connection H.
Maybe a firmware changes affected this?
Thank you so much!
Click to expand...
Click to collapse
reading == good
as for 4G/LTE, it could be due to radio or APN settings
you can find different radios here: http://forum.xda-developers.com/showthread.php?t=2419699
(flashable in custom recovery)
nkk71 said:
reading == good
as for 4G/LTE, it could be due to radio or APN settings
you can find different radios here: http://forum.xda-developers.com/showthread.php?t=2419699
(flashable in custom recovery)
Click to expand...
Click to collapse
Thank you for your awesome support.
I will READ about radio for solve that new issue.
See you later bro, have a nice day :highfive:
huleeyo said:
Thank you for your awesome support.
I will READ about radio for solve that new issue.
See you later bro, have a nice day :highfive:
Click to expand...
Click to collapse
try and get s-off and change your cid and mid to match the firmware you flashed.
Seanie280672 said:
try and get s-off and change your cid and mid to match the firmware you flashed.
Click to expand...
Click to collapse
I did use a firmware 5.11.1540.9 with this parameters:
modelid: PN0711000
modelid: PN0713000 ------------>My device.
modelid: PN0712000
modelid: PN0714000
modelid: PN0710000
modelid: PN071****
cidnum: HTC__*** ------------>My device.
cidnum: CWS__001
cidnum: H3G__***
cidnum: O2___***
cidnum: ORANG***
Click to expand...
Click to collapse
Still recommend to do S-OFF and re-flash with same firmware?
Related
Hello,
I'm newbie with HTC phones and android OS.
Last Wednesday (1 May 2013), I bought a HTC One (M7).
I updated my phone to 1.29.401.13 at work
Cause I needed to to install ProxyDroid and this app needs root access, I decided too root my new phone, I followed this instruction at home:
http://forum.xda-developers.com/showthread.php?t=2182792
When I went to work on Saturday, I couldn't connect to wifi. Nothing has been changed in our company network.
After searching I found some topics in deterrent websites and forums, they suggested to unroot and install stock ROM.
I downloaded and tried to install stock ROMs from http://www.androidfiles.org/ruu/?developer=M7
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4.exe
and another file from another forum:
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.exe
when I run the files and it staring, after a while I get this :
Error[140]: BOOTLOADER VERSION ERROR
The ROM Update Utility cannot update your Android phone
Please get the correct ROM Update Utility and try again
How can I go back to my first day phone ?
Regards
Code:
fastboot getvar version-main
and paste the result
matt95 said:
Code:
fastboot getvar version-main
and paste the result
Click to expand...
Click to collapse
1.29.401.12
I forget to say in rooting process I used CWM
fastboot getvar all :
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.12
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH34JW902927
(bootloader) imei: 354436055335689
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4283mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.047s
Regards
you can't run any RUU casue you have the highest version-main at the moment... you can't flash RUUs that are previously released than the 1.29 software, you can anctually run newer RUUs...at the moment the only possibility for you to get back to stock is to flash a nandroid backup that matches your cid
matt95 said:
you can't run any RUU casue you have the highest version-main at the moment... you can't flash RUUs that are previously released than the 1.29 software, you can anctually run newer RUUs...at the moment the only possibility for you to get back to stock is to flash a nandroid backup that matches your cid
Click to expand...
Click to collapse
Thanks for your help,
So can you give me a link or guide me to do this ?
Regards
follow this guide
and here you can download the nandroid backups for your device
matt95 said:
follow this guide
and here you can download the nandroid backups for your device
Click to expand...
Click to collapse
How can I get CID ?
Is this right ? cidnum: HTC__J15
Code:
fastboot getvar cid
matt95 said:
Code:
fastboot getvar cid
Click to expand...
Click to collapse
Result : cidnum: HTC__J15
but there is no nandroid backup for J15 here that you mentioned : http://forum.xda-developers.com/showthread.php?t=2207874 !
What should I do ?
try with this one, it has the same version main, it should work
remember, you need CWM to flash this!
matt95 said:
try with this one, it has the same version main, it should work
remember, you need CWM to flash this!
Click to expand...
Click to collapse
I'll try after downloading.
Odexed on this topic : http://forum.xda-developers.com/showthread.php?t=2224752 can be helpful ? and is there any guide to use Odexed and recovery image to install stock ROM ?
Regards
komsboy_more said:
I'll try after downloading.
Odexed on this topic : http://forum.xda-developers.com/showthread.php?t=2224752 can be helpful ? and is there any guide to use Odexed and recovery image to install stock ROM ?
Regards
Click to expand...
Click to collapse
yeah that should work too!
matt95 said:
yeah that should work too!
Click to expand...
Click to collapse
Thanks a lot.
On the Odexed topic for stock ROM, there is no "How to"
Can you help me on this ? Or give me a guide link ?
komsboy_more said:
Thanks a lot.
On the Odexed topic for stock ROM, there is no "How to"
Can you help me on this ? Or give me a guide link ?
Click to expand...
Click to collapse
it is a zip, you simply have to flash it, then in fastboot flash the boot.img and recovery.img and you'll be back to stock
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
matt95 said:
it is a zip, you simply have to flash it, then in fastboot flash the boot.img and recovery.img and you'll be back to stock
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Thanks.
Sorry for my question, what do you mean about flash? I should do it trough CWM to flash with zip file ?
Regards
komsboy_more said:
Thanks.
Sorry for my question, what do you mean about flash? I should do it trough CWM to flash with zip file ?
Regards
Click to expand...
Click to collapse
yep, as you would do with a custom rom
matt95 said:
yep, as you would do with a custom rom
Click to expand...
Click to collapse
I used Odexed STOCK ROM and fallow instruction that you provided to me. After booting up OS all settings are same as before flashing ROM.
Is it OK ?
Regards
komsboy_more said:
I used Odexed STOCK ROM and fallow instruction that you provided to me. After booting up OS all settings are same as before flashing ROM.
Is it OK ?
Regards
Click to expand...
Click to collapse
what do you mean by "After booting up OS all settings are same as before flashing ROM"?
matt95 said:
what do you mean by "After booting up OS all settings are same as before flashing ROM"?
Click to expand...
Click to collapse
I turned the phone into silent profile, changing some options in settings and etc. All of them remain.
so you can't change any setting?
Hi all,
First, i would like to apologize for my poor english.
Then, i have some problems with my HTC M7.
Yesterday, when i woke up, my phone was shut down. I thought that i had no battery anymore. (i had less than 10% when i went to bed so, it's possible).
Well, plug my phone in the charger, and wait... and, when he booted, i could not use my phone as usually: no PIN code, no ability to make phone call... After a few minutes, i saw that the IMEI zone was empty.
I was not worrying, and though that a simple cache cleearing could help me... Well, it was not...
Now, i'm not able to use my phone AT ALL.
He's rooted, S-OFF, and i tried to install 3 or 4 different roms but same problem.
The ROM install has some difficulties to be finished: in fact, on each rom i tried to install, i have now the same problem;
-> No IMEI
-> When i want to compose a phone number, the dialer does not appear
-> A message "com.htc.htcdialer isn't responding" appears every minute...
I tried to install another dialer, same problem...
I'm really lost.
hope that somebody could help me?
Regards,
Cyril
PS: For information, after the incident, my phone was not rooted anymore and was S-ON, i don't know if it was already the case before the incident...
UPDATE: Finally, i succeed to install a rom.
Everything works fine now, but still no imei present...
This is a firmware problem. It seems your firmware has corrupted.Best way is download a RUU for ur phone and just flash it.K ur s-on>can u get me a getvar all.
access ur bootloader select fastboot and then type " fastboot getvar all " without quotes.
Slim Shady said:
This is a firmware problem. It seems your firmware has corrupted.Best way is download a RUU for ur phone and just flash it.K ur s-on>can u get me a getvar all.
access ur bootloader select fastboot and then type " fastboot getvar all " without quotes.
Click to expand...
Click to collapse
Hi,
I've just started to work, but i will send you these informations as soon as possible.
Thanks a lot.
Slim Shady said:
This is a firmware problem. It seems your firmware has corrupted.Best way is download a RUU for ur phone and just flash it.K ur s-on>can u get me a getvar all.
access ur bootloader select fastboot and then type " fastboot getvar all " without quotes.
Click to expand...
Click to collapse
Re Slim Shady,
Here are the results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXX
(bootloader) imei: XXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3828mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
I'm not sure about what to do.
May i have to switch on s-on? Or relock the bootloader?
I don't really know how to install a new firmware...
an idea?
Leodagan said:
Re Slim Shady,
Here are the results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3828mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
I'm not sure about what to do.
May i have to switch on s-on? Or relock the bootloader?
I don't really know how to install a new firmware...
Click to expand...
Click to collapse
first please edit ur post and remove the imei and serial no from the post.Regarding ur problem download and flash this RUU http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Start the ruu and follow instructions like any windows application.If u have any questions feel free to ask .
Slim Shady said:
first please edit ur post and remove the imei and serial no from the post.Regarding ur problem download and flash this RUU http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Start the ruu and follow instructions like any windows application.If u have any questions feel free to ask .
Click to expand...
Click to collapse
just a quick note, he's s-off, personally I would go with a 1.xx ruu (except 1.20.xxx.x)
Slim Shady said:
first please edit ur post and remove the imei and serial no from the post.Regarding ur problem download and flash this RUU http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Start the ruu and follow instructions like any windows application.If u have any questions feel free to ask .
Click to expand...
Click to collapse
Done for IMEI and Serial NO, thx.
I've started to download it.
nkk71 said:
just a quick note, he's s-off, personally I would go with a 1.xx ruu (except 1.20.xxx.x)
Click to expand...
Click to collapse
Ok, so have i to switch on s-on?
Also, have i stay on unlocked mode?
Thanks guys, really.
Guys,
I tried to install the RUU but it failed:
Update from 3.62.1700.1 to 4.19.401.9, i click on next, then next, then a message (in french so i translate to you):
The update tool cannot update the android phone,
Please obtain the right update tool and try again.
Then, i can only click on ReadMe or Recovery, but nothing relevant after that.
Leodagan said:
Ok, so have i to switch on s-on?
Click to expand...
Click to collapse
Nooooo, do not go s-on!!
nkk71 said:
Nooooo, do not go s-on!!
Click to expand...
Click to collapse
Ok, i haven't done that, thanks ^^
So, now i'm stucked, i don't know what to do. Try another ruu?
I'm actually downloading RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.exe, is it ok?
Well, it's not ok, with this rom too i can't update my phone...
Maybe should i have to find a 3.62 RUU in order to update?
Leodagan said:
Well, it's not ok, with this rom too i can't update my phone...
Maybe should i have to find a 3.62 RUU in order to update?
Click to expand...
Click to collapse
What do you mean, can't update... you mean the ruu isn't working?
if so, then get this one: ruu_m7ul_1.28.401.7.zip
AFH mirror: http://www.androidfilehost.com/?fid=23329332407584993
then (after making sure MD5 is correct), rename the file to ruu.zip, and:
In bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE, the first one will report “failed flush again”, the second one will succeed.
fastboot reboot-bootloader
there is no need to relock bootloader or anything else with S-OFF (and stay S-OFF, don't even think about S-On!!)
if you want to see what kind of output to expect, check my guide http://forum.xda-developers.com/showthread.php?p=47794257&postcount=8 (post 8) which has a some visual feedback of what to expect. (disregard the guide, i'm just linking it for you to get an idea of what kind of output to expect)
Oh and you cannot do this on Win 8.1!!! http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2 FAQ#1
nkk71 said:
What do you mean, can't update... you mean the ruu isn't working?
Click to expand...
Click to collapse
Yep, same message than the other ruu:
Update from 3.62.1700.1 to 1.2*******, i click on next, then next, then a message :
The update tool cannot update the android phone,
Please obtain the right update tool and try again.
I'll try your last post, i let you know when finished.
Leodagan said:
Yep, same message than the other ruu:
Update from 3.62.1700.1 to 1.2*******, i click on next, then next, then a message :
The update tool cannot update the android phone,
Please obtain the right update tool and try again.
I'll try your last post, i let you know when finished.
Click to expand...
Click to collapse
HELL YES IT WORKS!!!
Thank you thank you !!
(well for the moment i'm in 4.1.2, i will wait a moment before flashing a new recovery, a new rom and all the stuff :laugh::laugh::laugh
Leodagan said:
HELL YES IT WORKS!!!
Thank you thank you !!
(well for the moment i'm in 4.1.2, i will wait a moment before flashing a new recovery, a new rom and all the stuff :laugh::laugh::laugh
Click to expand...
Click to collapse
and IMEI, baseband etc are all working again?
Yep, all is functional again... thanks again !
Leodagan said:
Yep, all is functional again... thanks again !
Click to expand...
Click to collapse
:good: :good: my pleasure.
BTW, if you going for 4.4 ROMs, use TWRP: get TWRP from:
2.6.3.3: http://techerrata.com/browse/twrp2/m7
or 2.6.3.4: http://techerrata.com/browse/twrp2/m7ul
(make sure MD5 is correct, that site does not play nice with download managers)
2.7.0.4b: http://forum.xda-developers.com/showthread.php?t=2708134
in bootloader/FASTBOOT USB:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
PS: for future reference about s-off vs s-on, check here http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2 (under Not so FAQ #2)
if all is good now, can you also edit main thread title to include [SOLVED], thanks
edit the first post -> at the bottom of the edit window, click Go Advanced, and then you can edit main title
Done.
Thank you again, guys.
Hi Guys,
I bought HTC one from Ebay, which was suppose to be Europe version but turns out to be HK version with OS - 2.24.708.4. OTA was not able to install with red triangle error in recovery, after some search i found out that the CID number must be tempered, and i saw that it is 11111 with S-off though it showing to be LOCKED. Which means i can install any custom ROM. I want to have 4.4 with sense 6, So i unlocked flashed twrp 2.6.3 and rooted. I downloaded Android revolution custom ROM (for international version) and flashed it. But afterwards the phone is in bootloop. I can load bootloader and use fastboot along with twrp. But i can't see anything in /sdcard, so data mount is not working it seems. There is no nandroid backup (my mistake ). I repeated the unlock/rooting process when the phone went in bootloop, that might have messed up with sdacrd access, as I flashed revolution rom from there only.
I am aware that by flashing RUU i can get back to stock, but I cant find any RUU for this particular baseband and HBOOT, if yes please let know what should be the closest RUU for this version ? If RUU is not the option, what should i do now ?
Current situation: NO ROM installed, only access to bootloader (fastboot) and recovery with no sdcard mounted.
Also, even though i rooted properly, i cant see "TEMPERED" in the bootloader.
CID-111111
HBOOT - 1.54
OS-2.24.708.4
RADIO 4A.18.3250.15
Additonal info
Attached image above it before Unlocking, after unlcoking and flashing recovery it just says unlcoked, rest everything remains same. I also tried sideloading with adb, the device is recognized in adb but i can't send big files, my system is frozen after running the command. But when i send a test file, it is sideloaded quickly.
Can anyone suggest, which ROM to sideload which will be compatible with my device ??
abhish1982 said:
Attached image above it before Unlocking, after unlcoking and flashing recovery it just says unlcoked, rest everything remains same. I also tried sideloading with adb, the device is recognized in adb but i can't send big files, my system is frozen after running the command. But when i send a test file, it is sideloaded quickly.
Can anyone suggest, which ROM to sideload which will be compatible with my device ??
Click to expand...
Click to collapse
you need twrp 2.6.3.3 to flash arhd rom, will not work with 2.6.3.0.
if you want the phone to be European version use a WWE ruu (.401 version)
change cid and mid to match the .401 ruu
then flash the ruu.
stay s-off and unlocked.
Thanks for your reply
alray said:
you need twrp 2.6.3.3 to flash arhd rom, will not work with 2.6.3.0.
if you want the phone to be European version use a WWE ruu (.401 version)
change cid and mid to match the .401 ruu
then flash the ruu.
stay s-off and unlocked.
Click to expand...
Click to collapse
I am trying to download this RUU from htcguru1 site, can i try any other international version as want quickest update to android and sense (unofficial)
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
also, what is the benefit of cid and mid change? can i leave it as it is ? Will it create issue for future mod or rom changes ?
I am pasting all info about device here (i want to be 100% sure that i am doing correct procedure this time ). many sites are talking about baseband for right RUU which is different for WWE version.
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.18.3250.15
version-cpld: None
version-microp: None
version-main: 2.24.708.4
version-misc: PVT SHIP S-OFF
serialno: FA3AGW900725
imei: 3558590549xxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN071****
cidnum: 11111111
battery-status: good
battery-voltage: 4268mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d16dc66985
hbootpreupdate: 11
gencheckpt: 0
abhish1982 said:
Thanks for your reply
I am trying to download this RUU from htcguru1 site, can i try any other international version as want quickest update to android and sense (unofficial)
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
also, what is the benefit of cid and mid change? can i leave it as it is ? Will it create issue for future mod or rom changes ?
I am pasting all info about device here (i want to be 100% sure that i am doing correct procedure this time ). many sites are talking about baseband for right RUU which is different for WWE version.
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.18.3250.15 THIS IS THE RADIO
version-cpld: None
version-microp: None
version-main: 2.24.708.4 THIS IS THE OS or ROM VERSION
version-misc: PVT SHIP S-OFF S_OFF MEANS YOU CAN USE ANY RUU THAT MATCHES YOUR MODELID (MID)
serialno: FA3********** (REMOVE THIS COMPLETELY)
imei: 355************ (REMOVE THIS COMPLETELY)
meid: 00000000000000
product: m7_ul DEVICE MODEL
platform: HBOOT-8064
modelid: PN071**** SHOW ALL OF THIS
cidnum: 11111111
battery-status: good
battery-voltage: 4268mV
partition-layout: Generic
security: off S_OFF = SECURITY OFF
build-mode: SHIP
boot-mode: FASTBOOT DEVICE CURRENT STATE, YOU ARE IN FASTBOOT MODE
commitno-bootloader: dirty-d16dc66985
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
See above red text
abhish1982 said:
Thanks for your reply
I am trying to download this RUU from htcguru1 site, can i try any other international version as want quickest update to android and sense (unofficial)
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
also, what is the benefit of cid and mid change? can i leave it as it is ? Will it create issue for future mod or rom changes ?
I am pasting all info about device here (i want to be 100% sure that i am doing correct procedure this time ). many sites are talking about baseband for right RUU which is different for WWE version.
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.18.3250.15
version-cpld: None
version-microp: None
version-main: 2.24.708.4
version-misc: PVT SHIP S-OFF
serialno: FA3AGW900725
imei: 3558590549xxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN071****
cidnum: 11111111
battery-status: good
battery-voltage: 4268mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d16dc66985
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
if you want to use ruu, you must make sure both cid and mid match the ruu you want to use. If you want to use custom rom, no need to tamper with these. You might want to take a look at arhd 71.1 or viperone, these are very good roms, always up to date (even much faster update then the official roms)
alray said:
if you want to use ruu, you must make sure both cid and mid match the ruu you want to use. If you want to use custom rom, no need to tamper with these. You might want to take a look at arhd 71.1 or viperone, these are very good roms, always up to date (even much faster update then the official roms)
Click to expand...
Click to collapse
But can i do it without flashing RUU now, as adb sideload is freezing my PC and sdcard is not showing mounted in recovery. Not sure if i flash twrp 2.6.3.3 will show my sdcard as I have the ARHD downloaded there.
Thanks for your patience friend, I am on steep learning curve since yesterday.
alray said:
if you want to use ruu, you must make sure both cid and mid match the ruu you want to use. If you want to use custom rom, no need to tamper with these. You might want to take a look at arhd 71.1 or viperone, these are very good roms, always up to date (even much faster update then the official roms)
Click to expand...
Click to collapse
I can't change mid now, as data mount is failing, saying 0 internal storage, what to do now ?
Other issue is the MID as per Getvar all is "PN071****" , how come it is like this ? can't find this issue anywhere
Please help I have the RUU but its failing may be becuase of MID, if i remain supercid, i guess i can still flash but may be MID is creating issues here. How to change the mID ?
Also, since data mount is failing adb is not worling properly, it was working till yesterday.
I guess flashing stock recovery might solve data access issue, but i can't find stock recovery for my version-main 2.24.708.4, please help with stock recovery
if you wanna same rom 2.24.708.4 or rom for your region 708 not available
you should change mid follow link to flash this tool use adb sideload if you cant access phone storage
and flash any RUU you want
i advice 4.3 US Dev Edition Rom which is update first of all
Developer Edition
modelid: PN0712000
cid: BS_US001
4.4.2 Rom RUU keep troubling
Other methods you can found HERE
yatindroid said:
if you wanna same rom 2.24.708.4 or rom for your region 708 not available
you should change mid follow link to flash this tool use adb sideload if you cant access phone storage
and flash any RUU you want
i advice 4.3 US Dev Edition Rom which is update first of all
Developer Edition
modelid: PN0712000
cid: BS_US001
4.4.2 Rom RUU keep troubling
Other methods you can found HERE
Click to expand...
Click to collapse
Hi Yatin,
I got original recovery but not original stock ROM, so I am still in a fix. Now i can see internal storage if I flash twrp 2.6.3.3., but it seems all the files has been wiped or formatted, ARHD rom file is not available. Also, adb sideload is not working. MID change is the most important now. I dont know how MID is with asteriks. I guess becuase of MID no RUU can be installed. I tried fastboot oem rebootRUU for sending OTA ROM, but it is now in bootloop again.
If you can PM me your phone number, i would call for some understanding. Thanks for your time.
Please PM me your phone number, if that is possible.
abhish1982 said:
Hi Yatin,
I got original recovery but not original stock ROM, so I am still in a fix. Now i can see internal storage if I flash twrp 2.6.3.3., but it seems all the files has been wiped or formatted, ARHD rom file is not available. Also, adb sideload is not working. MID change is the most important now. I dont know how MID is with asteriks. I guess becuase of MID no RUU can be installed. I tried fastboot oem rebootRUU for sending OTA ROM, but it is now in bootloop again.
If you can PM me your phone number, i would call for some understanding. Thanks for your time.
Please PM me your phone number, if that is possible.
Click to expand...
Click to collapse
MID with the 4 astrix is super MID, I had the option to have my phone changed to that when I had my phone s-off'd
Have you tried to use adb push instead of sideload ?
as there is no 708 ruu available for your phone you will have to use a custom rom.
put the rom in your adb/fastboot folder on your computer and rename it to rom.zip
plug your phone into the computer and boot it into recovery (main screen only)
open a command prompt on your computer inside the adb/fastbootfolder, (control + shift + right mouse click, open command window here)
then type adb push rom.zip /sdcard/
it will take a while so be patient, the command window will let you know when it is done.
Thanks guys for all your time and help. I am able to change my MID using MID change utility quoted by yatinder using adb sideload. Now after that i have CID HTC__001 and MID PN0710000 same as for Europe version. But when i try runing RUU
RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1(1)
It is giving me ERROR [155] Please choose correct ROM utilit for your device. I flashed stock recovery and relocked bootloader. Can you guys suggest a correct RUU here are my new details
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.18.3250.15
version-cpld: None
version-microp: None
version-main: 2.24.708.4
version-misc: PVT SHIP S-OFF
serialno: FAxxxxxxxxxxx
imei: 35xxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__001
battery-status: good
battery-voltage: 4310mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d16dc66
hbootpreupdate: 11
gencheckpt: 0
Also, for the suggestion of using custom ROM, i can't unlock my bootloader now to start with twrp 2.6.3.3 and ARHD. Its giving me this error now
C:\Flashtool\Fastboot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.150s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.160s
abhish1982 said:
Thanks guys for all your time and help. I am able to change my MID using MID change utility quoted by yatinder using adb sideload. Now after that i have CID HTC__001 and MID PN0710000 same as for Europe version. But when i try runing RUU
RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1(1)
It is giving me ERROR [155] Please choose correct ROM utilit for your device. I flashed stock recovery and relocked bootloader. Can you guys suggest a correct RUU here are my new details
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.18.3250.15
version-cpld: None
version-microp: None
version-main: 2.24.708.4
version-misc: PVT SHIP S-OFF
serialno: FAxxxxxxxxxxx
imei: 35xxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__001
battery-status: good
battery-voltage: 4310mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d16dc66
hbootpreupdate: 11
gencheckpt: 0
Also, for the suggestion of using custom ROM, i can't unlock my bootloader now to start with twrp 2.6.3.3 and ARHD. Its giving me this error now
C:\Flashtool\Fastboot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.150s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.160s
Click to expand...
Click to collapse
Since you are S-Off, use a custom recovery masked in a firwmare package: you can use of these "firmware" packages (m7_u/ul only):
http://www.androidfilehost.com/?w=files&flid=13085
in bootloader/FASTBOOT USB:
fastboot oem rebootRUU
fastboot flash zip fw_m7ul_TWRP_2.6.3.3_1.26.401.33.zip
fastboot reboot-bootloader
-> enter RECOVERY (should be TWRP or CWM now)
and use scotty1223's commands in custom recovery http://forum.xda-developers.com/showthread.php?t=2475914 to unlock bootloader
Code:
C:\ADB3>[B][COLOR="Blue"]adb devices[/COLOR][/B]
List of devices attached
HT34xxxxxxxx recovery [I]<- you need to be in custom recovery to
ensure [B]root[/B] privileges
i.e. an adb shell with [B]#[/B] as opposed to [B]$[/B][/I]
C:\ADB3>[B][COLOR="Blue"]adb shell[/COLOR][/B]
[SIZE="1"][I][U]Note[/U]
CWM shell prompt usually looks like [B]~#[/B]
TWRP shell prompt usually looks like [B]~ # ←[6n[/B]
it doesn't matter, you just type (or even better copy/paste) the commands in bold blue
[/I][/SIZE]
[I][SIZE="1"]Setting UNLOCKED[/SIZE][/I]
~ # [B][COLOR="Blue"]echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796[/COLOR][/B]
echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
4+0 records in
4+0 records out
4 bytes (4B) copied, 0.007691 seconds, 520B/s
~ # [B][COLOR="Blue"]exit[/COLOR][/B]
exit
C:\ADB3>[B][COLOR="Blue"]adb reboot bootloader[/COLOR][/B]
^^ if this doesn't work in your particular version,
just select reboot to bootloader in TWRP.
ps: your version-main will now say 1.26.401.33 (reflecting the recovery version 2.6.3.3); it didn't actually change, but version-main always shows the last thing flashed in ruu mode.
.
Also, there's no need to relock bootloader for RUU flashing when you are S-Off.
Do not ever go S-ON!!
Thanks nkk7, for your timely advise, device is now back to unlocked.
Yatin,
Using adb push, I am able to get the ARHD ROM in the sdcard, but after installation it is stuck on HTC logo. When i do factory reset, it is going back to recovery. What to do now? After flashing, i wipe cache and dalvik.
abhish1982 said:
Thanks nkk7, for your timely advise, device is now back to unlocked.
Yatin,
Using adb push, I am able to get the ARHD ROM in the sdcard, but after installation it is stuck on HTC logo. When i do factory reset, it is going back to recovery. What to do now? After flashing, i wipe cache and dalvik.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2228274&page=3
EDIT: are you getting any "unable to mount internal storage" and/or unable to "mount /data errors"?
nkk71 said:
http://forum.xda-developers.com/showthread.php?t=2228274&page=3
EDIT: are you getting any "unable to mount internal storage" and/or unable to "mount /data errors"?
Click to expand...
Click to collapse
It is only saying E: Unable to mount '/USB-OTG'
Any ideas, do i need to flash firmware first for my original version-main and then twrp and ARHD ?
abhish1982 said:
It is only saying E: Unable to mount '/USB-OTG'
Any ideas, do i need to flash firmware first for my original version-main and then twrp and ARHD ?
Click to expand...
Click to collapse
that error is OK, since you don't have an OTG cable attached.
But just so I get this right, can you explain what your ultimate goal is?
nkk71 said:
that error is OK, since you don't have an OTG cable attached.
But just so I get this right, can you explain what your ultimate goal is?
Click to expand...
Click to collapse
Phone is softbricked and I cant boot into any OS. I dont have any nandroid backups before flashing ARHD for the first time, from there on its a long journey. First i tried to restore it to stock, so went with RUU route. But even that is failing even though I had right CID and MID, may version-main was the issue.
Now i want ARHD or stock either to work. Current situation -Soft bricked, Unlocked, S-off, TWRP 2.6.3.3 OS original version 2.24.708.4. I reflashed ARHD, at the end of install (with full success, the device shut down automatically) When i start it shows HTC icon (with red text below) and nothng happen afterwards. I waited for 10 mins approximatley. Ultimately I want latest 4.4 with HTC sense. It seems stock option is very cumbersome so I am ok with Custom ROM. Should I try some other ROM ?
abhish1982 said:
Phone is softbricked and I cant boot into any OS. I dont have any nandroid backups before flashing ARHD for the first time, from there on its a long journey. First i tried to restore it to stock, so went with RUU route. But even that is failing even though I had right CID and MID, may version-main was the issue.
Now i want ARHD or stock either to work. Current situation -Soft bricked, Unlocked, S-off, TWRP 2.6.3.3 OS original version 2.24.708.4. I reflashed ARHD, at the end of install (with full success, the device shut down automatically) When i start it shows HTC icon (with red text below) and nothng happen afterwards. I waited for 10 mins approximatley. Ultimately I want latest 4.4 with HTC sense. It seems stock option is very cumbersome so I am ok with Custom ROM. Should I try some other ROM ?
Click to expand...
Click to collapse
First off, stay S-Off!! Do not even think about S-On.
Second, if you want to go for 100% stock, check my guide http://forum.xda-developers.com/showthread.php?t=2541082
using ruu.zip method with the 1.28.401.7 ruu.zip
Third, if you want ARHD or any other custom ROM, just follow the steps mentioned in the Frequently Asked Question sticky I linked earlier. assuming you checked MD5, used twrp 2.6.3.3, etc, then you didn't wait long enough for the ROM to boot up; as mentioned the first bootup (after a clean install) will take close to 20 mins.
Let me know if you have any questions
Hi, i run an HTC One M7 that was originally from AT&T. I unlocked it and use it in my country. Few days ago i wanted to install the stock Android and try it. I did everything as was said - unlocked the bootloader, s-off, recovery etc. after a few hours of the stock Android experience i wanted to change it to ARHD. As i changed it a question popped out asking if i want to root my device. I answered "yes", not knowing what it means. My phone was bricked and stuck on the HTC welcome screen since yesterday. I tried a lot of differend ways of fixing it and still no results. I locked and unlocked the bootloader again, tried to install the official RUU, but it doesn't want to. I get MTP driver error when connecting to my computer.
I have "can't mount SD card" on my phone. I'm pretty desperate, but i want to fix this issue and get back my phone. This will be a lesson for me.
Skyrocker94 said:
Hi, i run an HTC One M7 that was originally from AT&T. I unlocked it and use it in my country. Few days ago i wanted to install the stock Android and try it. I did everything as was said - unlocked the bootloader, s-off, recovery etc. after a few hours of the stock Android experience i wanted to change it to ARHD. As i changed it a question popped out asking if i want to root my device. I answered "yes", not knowing what it means. My phone was bricked and stuck on the HTC welcome screen since yesterday. I tried a lot of differend ways of fixing it and still no results. I locked and unlocked the bootloader again, tried to install the official RUU, but it doesn't want to. I get MTP driver error when connecting to my computer.
I have "can't mount SD card" on my phone. I'm pretty desperate, but i want to fix this issue and get back my phone. This will be a lesson for me.
Click to expand...
Click to collapse
post your fastboot getvar all minus the serial no and IMEI so we can find the files you'll need to restore you phone
clsA said:
post your fastboot getvar all minus the serial no and IMEI so we can find the files you'll need to restore you phone
Click to expand...
Click to collapse
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: --------------------
(bootloader) imei: -------------------------
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.120s
Here we go! thanks a lot!!
Skyrocker94 said:
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: --------------------
(bootloader) imei: -------------------------
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.120s
Here we go! thanks a lot!!
Click to expand...
Click to collapse
download this ruu and run it, its the same version you already have / had on your phone, if you bootloader is unlocked then you will need to re-lock it first.
http://www.htc1guru.com/dld/ruu_m7_...9_10-26-1718-01l_release_356565_signed_2-exe/
with regards to your drivers problem, see FAQ 2 here: http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
Thanks a ton!!! i hope it works!!!
Skyrocker94 said:
Thanks a ton!!! i hope it works!!!
Click to expand...
Click to collapse
fastboot oem lock
relocks the bootloader to run the RUU
if you have problems with the RUU
try this / unlocking the bootloader / flashing TWRP 2.6.3.3 and sideload this Guru Reset >> http://www.androidfilehost.com/?fid=23501681358545274
It worked. Thank you very much!
"Ask and it shall be given to you"
same issue here, no more SO and stuck in HTC log
Hello, help me please, i've search the RUU for restore my HTC but not are sure where's the right.
Here Original "fastboot getvar all" when device was working also w/o SO.
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.27.3218.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__402
INFObattery-status: good
INFObattery-voltage: 4102mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-1f512bb6
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Thanks a lot for help, sorry for my English.
vanito said:
Hello, help me please, i've search the RUU for restore my HTC but not are sure where's the right.
Here Original "fastboot getvar all" when device was working also w/o SO.
Thanks a lot for help, sorry for my English.
Click to expand...
Click to collapse
another H3G__402 you need help from @Danny201281
he has the same phone
vanito said:
Hello, help me please, i've search the RUU for restore my HTC but not are sure where's the right.
Here Original "fastboot getvar all" when device was working also w/o SO.
Thanks a lot for help, sorry for my English.
Click to expand...
Click to collapse
Well I'm H3G__001 UK. H3G__402 is Italy right? Not that it makes a difference the software is all the same.
Unfortunately there is no ruu for H3G. What exactly happened with your phone it can hopefully be fixed without the need for an ruu.
Bad flash, wiped your os? Can you access bootloader or recovery?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Danny201281 said:
Well I'm H3G__001 UK. H3G__402 is Italy right? Not that it makes a difference the software is all the same.
Unfortunately there is no ruu for H3G. What exactly happened with your phone it can hopefully be fixed without the need for an ruu.
Bad flash, wiped your os? Can you access bootloader or recovery?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Click to expand...
Click to collapse
this phone was w/o SO since i've buyed of 2 handle. was installed only a Custom Rom. i want make it S-OFF for installl anythingh for error from TWRP have done advanced wipe and have erase also this Rom whith all partition and BKP.
Phone enter in Recovery, hboot, fastboot and can flash RUU signed, (have tried with an BOX to flash Guru reset but Error becouse No signature), or if you have other Rom or other for fix this issue and after i want make S-OFF for change this Bad cid, if can help me please
vanito said:
this phone was w/o SO since i've buyed of 2 handle. was installed only a Custom Rom. i want make it S-OFF for installl anythingh for error from TWRP have done advanced wipe and have erase also this Rom whith all partition and BKP.
Phone enter in Recovery, hboot, fastboot and can flash RUU signed, (have tried with an BOX to flash Guru reset but Error becouse No signature), or if you have other Rom or other for fix this issue and after i want make S-OFF for change this Bad cid, if can help me please
Click to expand...
Click to collapse
Hi and sorry for the delayed reply, as I say there is no ruu for h3g, but it sounds as if you just need to push a compatible Rom to the phone, what is you current version of TWRP.
I do have some h3g stock nandroids, one for jb 4.3 and one for kk 4.4.2. I'll need to upload them for you and I can't do that until later this evening as I'm in work now. If you want to go s-off the jb 4.3 nandroid has worked for me everytime so would be worth a try. I'll upload it tonight and send you a link as soon as it's available.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
You're such a nice and friendly forum mate, @Danny201281
tetakpatalked from Nexus 7 flo
Danny201281 said:
Hi and sorry for the delayed reply, as I say there is no ruu for h3g, but it sounds as if you just need to push a compatible Rom to the phone, what is you current version of TWRP.
I do have some h3g stock nandroids, one for jb 4.3 and one for kk 4.4.2. I'll need to upload them for you and I can't do that until later this evening as I'm in work now. If you want to go s-off the jb 4.3 nandroid has worked for me everytime so would be worth a try. I'll upload it tonight and send you a link as soon as it's available.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Click to expand...
Click to collapse
Not worry, important i can fix with you help this problem.
My version of TWRP installed now is "twrp-2.7.1.0a-m7" this device first of i Erase all had installed an VENOM Rom, not remember wich ViperOnes version, my Getvar All you have seen, i want listen to you becouse not understand good about these HTC w/o sd card.
If you can send to me this nandroid jb 4.3 and if please write also if i can flash how normal rom/Ruu or how do.... you help is very good for me :good:
wait for you link to download, please if cannot use Mega.co is good becouse here is blocked and impossible open this, Ciao:good:
vanito said:
Not worry, important i can fix with you help this problem.
My version of TWRP installed now is "twrp-2.7.1.0a-m7" this device first of i Erase all had installed an VENOM Rom, not remember wich ViperOnes version, my Getvar All you have seen, i want listen to you becouse not understand good about these HTC w/o sd card.
If you can send to me this nandroid jb 4.3 and if please write also if i can flash how normal rom/Ruu or how do.... you help is very good for me :good:
wait for you link to download, please if cannot use Mega.co is good becouse here is blocked and impossible open this, Ciao:good:
Click to expand...
Click to collapse
Ok sorry I was very busy last night. I am on this for you now, I'll post link as soon as it's ready but my upload seed is very poor
I created this nandroid using TWRP 2.6.3.3 but it should restore fine using other versions of TWRP.
Do you have adb working when in recovery mode? You will need it to push the nandroid to the device.
Danny201281 said:
Ok sorry I was very busy last night. I am on this for you now, I'll post link as soon as it's ready but my upload seed is very poor
I created this nandroid using TWRP 2.6.3.3 but it should restore fine using other versions of TWRP.
Do you have adb working when in recovery mode? You will need it to push the nandroid to the device.
Click to expand...
Click to collapse
Hello, can leave this version of TWRP: "twrp-2.7.1.0a-m7", that i've or you can suggest another version?
System not Mount, i've tryed to push in fastbootRUU but fail anythinghs i want push.
I've tryed putting phone in Recovery mode and i can see from "device manager" that have "adb android" or similar then if open can see "My Htc", if i put in normal mode, (is w/o Boot.img), i can see MTP that install/uninstall and phone how "Cd Unit external", (cannot open).
Not warry where upload it, important not use Mega.co becouse in Italy is Blocked, any other site is ok.
Please can send to me also Command for Push this Nandroid 4.3 in Recovery mode?, (i've also one dongle + sw but for Flash anythinghs requiere fastboot RUU mode), anyway i'm looking forward this Nandroid Bkp and how push in phone hooping that i can fix the phone
@vanito backup done with TWRP 2.6.3.3 is compatible with 2.7.1.0
He is asking you about ADB and using command line of your PC to push the files. Do you know how to do it? Do you have SDK installed on your PC?
tetakpatalked from N7100
vanito said:
Hello, can leave this version of TWRP: "twrp-2.7.1.0a-m7", that i've or you can suggest another version?
System not Mount, i've tryed to push in fastbootRUU but fail anythinghs i want push.
I've tryed putting phone in Recovery mode and i can see from "device manager" that have "adb android" or similar then if open can see "My Htc", if i put in normal mode, (is w/o Boot.img), i can see MTP that install/uninstall and phone how "Cd Unit external", (cannot open).
Not warry where upload it, important not use Mega.co becouse in Italy is Blocked, any other site is ok.
Please can send to me also Command for Push this Nandroid 4.3 in Recovery mode?, (i've also one dongle + sw but for Flash anythinghs requiere fastboot RUU mode), anyway i'm looking forward this Nandroid Bkp and how push in phone hooping that i can fix the phone
Click to expand...
Click to collapse
twrp 2.7.1.0 should work fine :good:
adb will only work in recovery mode. Put phone in recovery and connect usb. Then in the adb/fastboot command line type
Code:
adb devices
You should see an output of your phone's serial no. If you did it's working. You can test adb push with a Rom if you have one. Rename the Rom file to "rom.zip" and put it in your adb/fastboot folder. Then in the command line type
Code:
adb push rom.zip /sdcard
The push will take several minutes the command window will be unresponsive until it's done. When it's finished the push you should be able to Install the Rom using TWRP.
P.S. The stock nandroid is uploading to dropbox. This is ok for use in Italy?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
@vanito you have got a real little guide for Windows by @Danny201281
In the case that you are a Linux user, it works just slightly different: in such case check my little thread about running fastboot & ADB in Ubuntu. It is posted in the Nexus 7 section but ADB works for Samsung just the same way.
tetakpatalked from Nexus 7 flo
Danny201281 said:
twrp 2.7.1.0 should work fine :good:
adb will only work in recovery mode. Put phone in recovery and connect usb. Then in the adb/fastboot command line type
Code:
adb devices
You should see an output of your phone's serial no. If you did it's working. You can test adb push with a Rom if you have one. Rename the Rom file to "rom.zip" and put it in your adb/fastboot folder. Then in the command line type
Code:
adb push rom.zip /sdcard
The push will take several minutes the command window will be unresponsive until it's done. When it's finished the push you should be able to Install the Rom using TWRP.
P.S. The stock nandroid is uploading to dropbox. This is ok for use in Italy?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Click to expand...
Click to collapse
@Danny201281, ok i have this twrp 2.7.1.0 also and can install replace the other one i've installed:good:
Yes i've installed adb&fastboot in C: (principal directory), i use Win7 32 bit and can use also win Xp in the 2 pcs i've adb&fastboot installed.:good:
Yes, i know a little about use of these adb or fastboot, specific command for this case i can copy from this you good guide:good:
I've tested pushing "guru reset..." from fastboot yesterday but have get one Error 24, not have tested pushing via Adb command, but now i see you command above and can test this.
Sorry, i not know which Rom can push and if you can advise me about wich push is big help, (if you can post only link to Rom) for me, if possible any Rom for to make S-Off after that i fix this phone.
Yes, Dropbox i can use here if you give me access for download the Nandroid Bkp 4.3.
Last question, if push of Rom goes all ok, after i open phone in recovery and find this Rom in Sd Card, right?...then from "Install>Sd Card>Rom" swipe and will be installed right?
Ok, after i install this Rom always from recovery can install you nondroid bkp 4.3, ok?, :good:
I'm ready if can send to me link for this Rom and Link of dropbox i want try to ceck anythinghs.
Hi I had been getting update notifications system upgrade on my HTC M7
Ändroid L Upgrade. I hope it would fix my device from forgetting wifi passwords..
When I pressed to install, it would got to recovery (then it was twrp) and fail, reboot back
After some investigation on this forums found it the problem was going from my software version LRX22c.H3 to LMY470 was not going to happen because it missed parts.
I tried stock recovery that failed with red exclamation mark
No problem I think Iwill download the full firmware 5.01 and install that following the guide here http://forum.xda-developers.com/htc-one/development/rom-google-play-edition-lollipop-v1-00-t2963927
But Having tried unsuccesfully now for 3 days I am asking for help.
The problems I have seem to be
1 HBoot 1.54 (to soff i thin i need to be on 1.55+
cid HTC__44 tried numers times to changeto 11111111 but I assume because s-on no joy
S-ON tried to soff firwalker gave up
currently on kernel 3.4.106-kangaroo-g3a212fc
baseband says 4a.17.3250.14_10.39.1150.04D
yes I am very familiar with ADB Fastboot, CWm or TWRP (current bootloader)
Can anyone please suggest the correct path to get CID 1111111 on so that I beleive i can then flash over the firmware listed in http://forum.xda-developers.com/htc-one/development/rom-google-play-edition-lollipop-v1-00-t2963927, and then i can flash google rom
And am I correct in my assumptions?
Thanks everyone for you consideration an any help offered
post the output of "fastboot getvar all"
Claude. K said:
Hi I had been getting update notifications system upgrade on my HTC M7
Ändroid L Upgrade. I hope it would fix my device from forgetting wifi passwords..
When I pressed to install, it would got to recovery (then it was twrp) and fail, reboot back
Click to expand...
Click to collapse
You can't install ota update using a custom recovery, you must use the stock recovery that match your firmware version or that one provided in the ota update zip file.
After some investigation on this forums found it the problem was going from my software version LRX22c.H3 to LMY470 was not going to happen because it missed parts.
I tried stock recovery that failed with red exclamation mark
Click to expand...
Click to collapse
What was the error (hold volume up and hit power to see the error)
alray said:
post the output of "fastboot getvar all"
You can't install ota update using a custom recovery, you must use the stock recovery that match your firmware version or that one provided in the ota update zip file.
What was the error (hold volume up and hit power to see the error)
Click to expand...
Click to collapse
Now. power up voluume up just boots normally....except now phone ui unworkable as i get unforunatly the phone has stoppped and Nfc service stopped error msgs preventing me from using the ui!!!!
So frustrated right now.
Is the an easy way to flash everything in one? Maybe a nandroid or something with right firmware and or
recovery so I may get to where i want:crying:
Claude. K said:
Now. power up voluume up just boots normally....except now phone ui unworkable as i get unforunatly the phone has stoppped and Nfc service stopped error msgs preventing me from using the ui!!!!
So frustrated right now.
Is the an easy way to flash everything in one? Maybe a nandroid or something with right firmware and or
recovery so I may get to where i want:crying:
Click to expand...
Click to collapse
I can't help if you don't post the output of "fastboot getvar all" like I asked above.
power up voluume up just boots normally
Click to expand...
Click to collapse
Its volume up than power button when already booted in recovery, when you see red triangle telling you that the ota update failed.
alray said:
I can't help if you don't post the output of "fastboot getvar all" like I asked above.
Its volume up than power button when already booted in recovery, when you see red triangle telling you that the ota update failed.
Click to expand...
Click to collapse
Hi
thanks for your help. I really do appreciate your contribution.
Last night I had to walk away and breath before I did something silly!
Have just got on a windows 7 machine (icant get fastboot to work on my win 8.1 at home)
Output from
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.707.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA355W906314
(bootloader) imie: 354435050701986
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3674mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: FASTBOOT
(bootloader) commitni-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks again
And for some reason the ui does now work (no annoying pop up messages today) after a good nights sleep, strange but true.
Claude. K said:
Hi I had been getting update notifications system upgrade on my HTC M7
Ändroid L Upgrade.
Click to expand...
Click to collapse
Your version-main is 2.24.707.3, its not a Google Play Edition phone, neither Android L version. You are running a custom rom right (a GPE rom)? You can't take ota updates if your version-main doesn't match your rom version.
Claude. K said:
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband 4A.17.3250.14
(bootloader) version-main: 2.24.707.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_u
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__044
(bootloader) security: on
Click to expand...
Click to collapse
You should achieve s-off and do a full conversion to GPE version if you want to use OTA updates. Achieve S-OFF with sunshine then change your CID to GOOGL001, your MID to PN0712000 and flash the latest GPE ruu.
alray said:
Your version-main is 2.24.707.3, its not a Google Play Edition phone, neither Android L version. You are running a custom rom right (a GPE rom)? You can't take ota updates if your version-main doesn't match your rom version.
You should achieve s-off and do a full conversion to GPE version if you want to use OTA updates. Achieve S-OFF with sunshine then change your CID to GOOGL001, your MID to PN0712000 and flash the latest GPE ruu.
Click to expand...
Click to collapse
THANKYOU very much for the pointer!
On it now! Keep you posted of my success, hopefully.
Claude. K said:
THANKYOU very much for the pointer!
On it now! Keep you posted of my success, hopefully.
Click to expand...
Click to collapse
DAMN IT
Sunshine encountered problems with your rom. please flash a stock or more near stock rom and try again...
So should this be the one? to try
http://www.htc1guru.com/downloads/stock-rom-downloads/
"Guru Reset M7 3.63.707.4
File Size: 1.2 GiB - Downloads: 47362
MD5: 6aba67e56889124c4ab5188bba15a569
Comments: Stock Asia/India (World Wide English) ROM 3.63.707.4 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.
Future OTA Updates will work when available.
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038"
This going to take the very slow internet connection here ll night to get this, so would like to be sure?
Or the same version ??? this one ? ModelID different? Problem?
Guru Reset M7 2.24.707.1
File Size: 1.1 GiB - Downloads: 11781
MD5: e9f6aba0e6cd997899382cbda2da1ebe
Comments: Stock rom 2.24.707.1 with graphical aroma installer. Includes the ability to flash the Stock Radio from 2.24.701.1 and also Stock Recovery.
Stock ROM version for these types:
modelid: PN0714000
modelid: PN0710000
cidnum: HTC__044
Thank you again
Claude. K said:
DAMN IT
Sunshine encountered problems with your rom. please flash a stock or more near stock rom and try again...
So should this be the one? to try
http://www.htc1guru.com/downloads/stock-rom-downloads/
"Guru Reset M7 3.63.707.4
File Size: 1.2 GiB - Downloads: 47362
MD5: 6aba67e56889124c4ab5188bba15a569
Comments: Stock Asia/India (World Wide English) ROM 3.63.707.4 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.
Future OTA Updates will work when available.
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038"
This going to take the very slow internet connection here ll night to get this, so would like to be sure?
Or the same version ??? this one ? ModelID different? Problem?
Guru Reset M7 2.24.707.1
File Size: 1.1 GiB - Downloads: 11781
MD5: e9f6aba0e6cd997899382cbda2da1ebe
Comments: Stock rom 2.24.707.1 with graphical aroma installer. Includes the ability to flash the Stock Radio from 2.24.701.1 and also Stock Recovery.
Stock ROM version for these types:
modelid: PN0714000
modelid: PN0710000
cidnum: HTC__044
Thank you again
Click to expand...
Click to collapse
flash the 2.24.707.1 reset rom and try sunshine again
Claude. K said:
THANKYOU very much for the pointer!
On it now! Keep you posted of my success, hopefully.
Click to expand...
Click to collapse
alray said:
flash the 2.24.707.1 reset rom and try sunshine again
Click to expand...
Click to collapse
Rumrunner may work on that version also .. For Free !
alray said:
flash the 2.24.707.1 reset rom and try sunshine again
Click to expand...
Click to collapse
Flashed the ROM 2.24.707.1 and get the same message from sunshine.
However rumrunner has acheived s-off !!!!!!!.
Claude. K said:
Flashed the ROM 2.24.707.1 and get the same message from sunshine.
However rumrunner has acheived s-off !!!!!!!.
Click to expand...
Click to collapse
MID Changed ! PN0712000 !!!
Please would you @alray be kind enough to recommend appropriate ruu and or firmware and or kernel ?
Is this OK? http://www.graffixnyc.com/m7.php rooted version
Thanks so very much!!!
Claude. K said:
MID Changed ! PN0712000 !!!
Please would you @alray be kind enough to recommend appropriate ruu and or firmware and or kernel ?
Is this OK? http://www.graffixnyc.com/m7.php rooted version
Thanks so very much!!!
Click to expand...
Click to collapse
This one should be fine. I would flash the non routed 5.0.1 and then take the ota update to 5.1 and root after.
THANKYOU very much for the pointer!