I succeeded to fix the phone by myself. Please remove this.
It's actually a *lot* more helpful if you post what you did (along with what the problem is) in case anybody else has your problem...
Related
Hi there!
Anybody an idea how to solve this Problem (by myself):
First my Diamond stuck at the Bootscreen, where Rom-Version, Radio-Version etc. is shown- doesn't do anything for ages... then left alone at this screen,
and after work it was off and doesn't respond.
What I did:
I Pulled the Battery out of my Diamond, connect to AC 4 charging and insert Battery again, tired evrything from replace battery after 20mins, HR, SR, USB-Trigger-Mode - NOTHING HELPED still NO RESPOND
Also on AC the LED's don't work...
Anybody same problem? Or any Idea?
I'm not very happy about losing all data and sent my HTC to Repair
Maybe same Problem then here? But I didn't do a flash or installed any software/Tweaked system before.
-Daddyload2-
Hi all!
First of all, i would like to tell, that i'm just the kind of who comes here just for reading topics
But now i have this problem: when i plug in the jack, the picture shows up on the TV. That's fine, but my touchscreen stops to working, the hardware keys are still fine :S
Anybody know if there's a solution for this?
Or somebody who had a related problem?
Thx 4 D answers
Hi,
I was just wondering, before I send my sgs away for repair, if anyone has seen a problem like this and (possibly) knows a fix?
[youtube.com]/watch?v=O_ljBRE902o
As the description says, the screen has a certain region where it seems to be hyperresponsive. Don't even know how to explain it, just watch the video
Here's someone with a similar problem but no fix still.
[youtube.com]watch?v=22ksUiqrLZk
sorry for not posting direct links, but the forum wouldn't let me
My touch screen is having issues.. In one area about 3/4 down near the bottom across the length the screen is not responsive.. Here is a picture showing where /i62.tinypic.com/2ykn8rd.png (please add the http:/ before the link to check it)
I checked the touch with the service test
Is it a problem with the hardware? Because I haven't dropped it and there aren't any cracks..
Only thing I can think of is that my charger wire is a little frayed and that charge has seeped into the screen.. But is this damage permanent or how can I fix it ?
Any help would be much appreciated.. Thank you
Any help please?
randikag said:
Any help please?
Click to expand...
Click to collapse
Hi there, I'm sorry I couldn't find any information regarding your problem in the web and the way how to fix it. I'm suggesting you to send your phone to specialized repair center (Sony). Or you just can give a try and reflash the rom you're using, maybe it causes this problem - nobody knows until you try.
Good luck! If you're answering or anything like so, please quote the message that I'd be able to see it.
Hi, if the touch screen previously works without problem, can be an hardware damage of the touch screen panel, as you can see there is only one row that don't works, all you have to do is replace the entire LCD+Digitizer assembly, and the phone will works perfectly
Hi All,
I replaced a broken display on my hauwei p9 eva-l19, but now the microphone is not working! :crying:
I tested a little bit and it works only if I try to register something (native app or whatsapp) or if I use the speakerphone, but during any call (whatapp, normal) it does not works.
Could it be a software issue?
Have you any experience about this? Do you know if is possible and how to debug a little bit my phone?
Thanks you.
Same problem here!
Hi,
I have the same problem after screen replace, but I have also tried to replaced the mic/USB-C daughterboard and the problem still persist´s.
The next thing to do is to change the flex cable between daughterboard and the motherboard.
Anyone else have had similar problems?
Did you find a solution? I have the same problem. Was it the flex cable?
I'm in the same boat, after screen replacement the mic is still working but barely operational. I was about to replace the board with the mic as well. Did anyone tried with a new flex cable after all?