Database Develop

[Q] Stuck in Clockwork Recovery

I was trying to flash a new kernel, and so i wiped the 2 caches and now im stuck on the Clockwork Recovery Screen. I try rebooting, and all it does is just go back to the Recovery screen. Please help, i want to use my nook color again.

Do you have previously created backup on your SD card ?
If so just restore.

Unfortunatly, i didnt. I just got it a couple days ago and am brand new to all these mods.

me too
This just happened to me as well. I even had a backup image and restored, but it would still loop. I used the following zip which removes clockwork recovery (thanks to the OP that originally posted this) and it then it worked.
Give it a shot

OMG, I LOVE YOU! No really, thank you so much!!! It works perfect!

Your welcome...........

Solidsnake726 said:
OMG, I LOVE YOU! No really, thank you so much!!! It works perfect!
Click to expand...
Click to collapse
I think this is beginning of beautiful relationship

Some additional info that may be relevant or not...
Some users have reported that after clearing the dalvik cache in CWR (as part of the process to flash a custom kernel), the screen locks up and they are unable to return to the main recovery screen.
This was resolved by 1) hook up your nook to the wall charger, 2) hold the power button which will force a reboot, 3) after your nook reboots to its normal screen, restart the kernel flash procedure from the beginning, 4) after you clear the dalvik cache, do not touch anything for at least 30 seconds
After step 4, CWR usually doesn't lock up and you should be able to navigate back to the main recovery screen to finish the kernel flash process. For some reason or another, the nook just needs a little time after clearing the dalvik cache before you can press any buttons.

yan2000kee said:
This just happened to me as well. I even had a backup image and restored, but it would still loop. I used the following zip which removes clockwork recovery (thanks to the OP that originally posted this) and it then it worked.
Give it a shot
Click to expand...
Click to collapse
I have had the same issue as the OP using ROM Manager to install 3.0.0.5 on 1.1.0 using Auto-Nooter 3.0.0. I was able to use the quoted method to break out (for the record I did so before reading this post ). However, I ran into the problem again after a full reroot and am still looking for a permanent solution to the problem.

yan2000kee said:
This just happened to me as well. I even had a backup image and restored, but it would still loop. I used the following zip which removes clockwork recovery (thanks to the OP that originally posted this) and it then it worked.
Give it a shot
Click to expand...
Click to collapse
Sorry for being a noob but what do I do with this file? Just put it on root and run it in CWR?

Moorfrost said:
Sorry for being a noob but what do I do with this file? Just put it on root and run it in CWR?
Click to expand...
Click to collapse
Yes. Boot into CWR and select the zip file from the SD card and flash.

eyecrispy said:
Yes. Boot into CWR and select the zip file from the SD card and flash.
Click to expand...
Click to collapse
Thanx a million, worked like a charm.

Thanks... But one other question...
Thanks for this got me out of the CWR bootloop, but now I'm stuck on the android splash screen.
UPDATE: Just tried to start all over and now it got me a bit further, but to a black screen with a white banner up top that says "Android System"...

Another noob question, sorry. Will this also restore the stock BN recovery? Regardless, thanks.

lekofraggle said:
Another noob question, sorry. Will this also restore the stock BN recovery? Regardless, thanks.
Click to expand...
Click to collapse
yes it does , just did it my self

Lifesaver! Thanks!

Maybe this should be linked to original thread.. So that things are made clear..
Sent from my HTC Desire using XDA App

Sorry to bump this thread, but OP's issue of being stuck in CWR happens to me every time I try to install the overclock kernel on my Eclair nook.
Any advice on what I can do to successfully overclock?

Anoxymoron said:
Sorry to bump this thread, but OP's issue of being stuck in CWR happens to me every time I try to install the overclock kernel on my Eclair nook.
Any advice on what I can do to successfully overclock?
Click to expand...
Click to collapse
I found a work around. Open cwr..flash recovery, exit recovery, reboot from quick boot . Once rebooted go back to cwr flash recovery, reboot into recovery, clear cache flash zip..reboot. This has worked numerous times for me.

bratliff said:
I found a work around. Open cwr..flash recovery, exit recovery, reboot from quick boot . Once rebooted go back to cwr flash recovery, reboot into recovery, clear cache flash zip..reboot. This has worked numerous times for me.
Click to expand...
Click to collapse
This is assuming that CWR is on internal memory.. if you are booting CWR from SD.. you need to take out the SD card then boot up.

[Q] Where can I get stock ROM for restoring Nook HD+?

Hello,
Kudos to all the nice folks here for the CM mod and updates.
My Nook HD+ has battery issues and was told to send it back to B&N. I took a backup of the stock ROM before installing CM but I'm unable to find it :crying:
I've searched a lot for this and would really really appreciate a link to download the ROM and copy to the microSD card.
I believe I just need the "clockworkmod" folder on the microSD card, right? If not, it would be great to have quick steps.
Thanks again for your time..

You can get the plain stock zip that is flashable with CWM from my HD/HD+ CWM thread linked in my signature. Item 6. That will take you back to pure stock so you can deal with B&N.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
You can get the plain stock zip that is flashable with CWM from my HD/HD+ CWM thread linked in my signature. Item 6. That will take you back to pure stock so you can deal with B&N.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks a lot for your prompt response, leapinlar.
I downloaded "NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13).zip" and extracted it to get "NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13).img" which I burned to the microSD card using "Win32DiskImager"
And then, I copied "NookHDplus-factory-2.1.1-plain-stock.zip" file to the card. I tried inserting this card to the Nook HD+ device but it just boots to CM instead of showing options to restore.
I believe I'm missing something. I'm so sorry to bother you but would greatly appreciate if you could spare a few moments to point me in the right direction. It would be immensely helpful.
Thanks so much again for responding.

You can try using my alternate procedure in item 1a in my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
You can try using my alternate procedure in item 1a in my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks again, leapinlar.
I tried the alternate procedure and did the following:
1. Used "SDFormatter" to format the card and used "EaseUS Partition Master" to make the single partition on the microSD card "active"
2. Copied files making sure to copy "MLO" file first before copying the rest. (Please refer to attachment for the files that were in the card)
I was able to complete the "install from SD card" option and it finished with the following message:
Code:
Random Offset: 0xcb
Boot Files...
Boot Files...
Install Complete.
When I tried rebooting the device, Nook HD+ seems to load stock but gets stuck at 99% forever. Not sure how to proceed now. Can I just go ahead and return the device or should I bring it to working condition?
Thanks again for sparing your time, leapinlar.. Greatly appreciate it.

Did you do a factory reset with CWM before rebooting after flashing the plain stock? You need to.
Sent from my Nook HD+ running CM10.1 on emmc.

just to confirm
Hi. I am selling my nook hd+ and would like to restore the B&N stock rom. I am running CM 10.1 stable. Based on this thread and leapinlar's advice in his CWM thread, I have the following steps:
1. Place the backed-up nook rom zip in the CWM folder.
2. Reboot into CWM recovery
3. Wipe data and rom
4. Flash the stock zip file
Based on leapinlar's advice in his CWM thread, it is my understanding that flashing the zip will fully restore the unit to stock rom, including stock recovery. Is that correct?
EDIT: Sorry, but perhaps I was mistaken. The stock rom zip has to be loaded on the bootable CWM sd card?
Appreciate all input. Thank you.

banditsw said:
Hi. I am selling my nook hd+ and would like to restore the B&N stock rom. I am running CM 10.1 stable. Based on this thread and leapinlar's advice in his CWM thread, I have the following steps:
1. Place the backed-up nook rom zip in the CWM folder.
2. Reboot into CWM recovery
3. Wipe data and rom
4. Flash the stock zip file
Based on leapinlar's advice in his CWM thread, it is my understanding that flashing the zip will fully restore the unit to stock rom, including stock recovery. Is that correct?
EDIT: Sorry, but perhaps I was mistaken. The stock rom zip has to be loaded on the bootable CWM sd card?
Appreciate all input. Thank you.
Click to expand...
Click to collapse
Restoring the backup will only do the ROM and not recovery. You must flash the plain stock zip if you want both replaced. And yes, you copy the zip to the SD. And just do the factory reset, no other wiping.
Sent from my BN NookHD+ using XDA Premium 4 mobile app

leapinlar said:
Restoring the backup will only do the ROM and not recovery. You must flash the plain stock zip if you want both replaced. And yes, you copy the zip to the SD. And just do the factory reset, no other wiping.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you!
When you refer to factory reset, you are referring to factory reset of the current rom on the unit (i.e. in my case, CM 10.1)?

banditsw said:
Thank you!
When you refer to factory reset, you are referring to factory reset of the current rom on the unit (i.e. in my case, CM 10.1)?
Click to expand...
Click to collapse
I am talking about booting to CWM and selecting factory reset on the main menu. That will wipe all installed apps and settings on whatever is installed on internal memory.
Sent from my BN NookHD+ using XDA Premium 4 mobile app

leapinlar said:
Did you do a factory reset with CWM before rebooting after flashing the plain stock? You need to.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks so much, leapinlar. That worked!

adding to this
muchcalmer said:
Thanks so much, leapinlar. That worked!
Click to expand...
Click to collapse
Hello guys, I would just like to add to this- I actually wanted to restore to stock rom as well.
I remember using the img burn method as outlined before to get to cwm recovery. I actually tried the new method involving just formatting and copying the 5 boot files and copying the zips as well. However, with the sd card in the slot, the device just boots to the stock rom.
From reading leapinlar's guide, I remember saying that it will take about 10 boots to boot into cwm recovery- however, I did over 15 times now and with no success- is there any other way to get to recovery mode quicker?
I actually ended up running into TWRP recovery and there did the flashing of stock rom, but it didn't get rid of the cyanoboot screen- I think I need to go through one more factory reset in order to get rid of the boot screen, and therefore will need to access the cwm recovery.
Any help will be appreciated. thanks

gomavs123 said:
Hello guys, I would just like to add to this- I actually wanted to restore to stock rom as well.
I remember using the img burn method as outlined before to get to cwm recovery. I actually tried the new method involving just formatting and copying the 5 boot files and copying the zips as well. However, with the sd card in the slot, the device just boots to the stock rom.
From reading leapinlar's guide, I remember saying that it will take about 10 boots to boot into cwm recovery- however, I did over 15 times now and with no success- is there any other way to get to recovery mode quicker?
I actually ended up running into TWRP recovery and there did the flashing of stock rom, but it didn't get rid of the cyanoboot screen- I think I need to go through one more factory reset in order to get rid of the boot screen, and therefore will need to access the cwm recovery.
Any help will be appreciated. thanks
Click to expand...
Click to collapse
You flashed my plain stock 2.1.1 zip from my HD/HD+ CWM thread with TWRP? That should have taken it completely back to stock without the cyanoboot logo showing. Factory reseting will not remove it. Are you sure it completed properly?
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
You flashed my plain stock 2.1.1 zip from my HD/HD+ CWM thread with TWRP? That should have taken it completely back to stock without the cyanoboot logo showing. Factory reseting will not remove it. Are you sure it completed properly?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
thanks for the reply-
Actually I did do that- and sure enough the nook logos are showing now- but the cyanoboot logo still shows in the beginning. I think the solution is to try these steps again in cwm recovery instead of twrp- not sure how to get there though- can you offer me any advice in booting into cwm recovery mode ? Doing the recovery multiple times haven't really worked out so far.

gomavs123 said:
thanks for the reply-
Actually I did do that- and sure enough the nook logos are showing now- but the cyanoboot logo still shows in the beginning. I think the solution is to try these steps again in cwm recovery instead of twrp- not sure how to get there though- can you offer me any advice in booting into cwm recovery mode ? Doing the recovery multiple times haven't really worked out so far.
Click to expand...
Click to collapse
Are you sure you flashed the plain stock and not my rooted stock? Rooted stock would cause the cyanoboot logo to still show.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
Are you sure you flashed the plain stock and not my rooted stock? Rooted stock would cause the cyanoboot logo to still show.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
yes! I actually flashed the rooted stock. So then the next question I have is- is it possible to have no cyanoboot logo yet have the device rooted?
also, I am still wondering as to why the cwm recovery is not showing up when I use my sd. is the method using img recovery still valid?
thanks for your help, as always.

gomavs123 said:
yes! I actually flashed the rooted stock. So then the next question I have is- is it possible to have no cyanoboot logo yet have the device rooted?
also, I am still wondering as to why the cwm recovery is not showing up when I use my sd. is the method using img recovery still valid?
thanks for your help, as always.
Click to expand...
Click to collapse
Yes, my root methods before rev3 used the old way of rooting, without the revised boot.img. But those versions did not have the /system file protection removed. But I removed it from my site when I published rev3.
And yes the CWM SD is still valid using both methods. But sometimes the img method is harder to achieve.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
Yes, my root methods before rev3 used the old way of rooting, without the revised boot.img. But those versions did not have the /system file protection removed. But I removed it from my site when I published rev3.
And yes the CWM SD is still valid using both methods. But sometimes the img method is harder to achieve.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
do you mean by flashing universal root rev2 on pure stock rom, there should not be cyanboot logo?
can you please explain removed system file protection? do you mean the root is not complete? some app can not get su access?

brux4me said:
do you mean by flashing universal root rev2 on pure stock rom, there should not be cyanboot logo?
can you please explain removed system file protection? do you mean the root is not complete? some app can not get su access?
Click to expand...
Click to collapse
That is correct, there is no cyanoboot logo with rev2. And rev2 works perfectly as root.
What I mean by no removed file protection is that with rev2 you cannot change any files in /system without it being detected and on the next boot it resetting itself to pure stock with no root. With rev3 that file protection for /system is removed, but it shows the cyanoboot logo. It is a trade off.
If you want rev2 I can repost the link.
Sent from my SCH-i705 using XDA Premium HD app

leapinlar said:
You flashed my plain stock 2.1.1 zip from my HD/HD+ CWM thread with TWRP? That should have taken it completely back to stock without the cyanoboot logo showing. Factory reseting will not remove it. Are you sure it completed properly?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
So, I have used every trick you have posted to recover or install a new rom. After I install the rom and GAPPS with the bootable SD card, I restart and it just sits on the NOOK screen. I did notice I get a this: INSTALLING UPDATE / Random OFFSET: 0x26d / Boot Files...Boot Files...
The Random Offset number changes each time I try to install the rom.......any ideas?

Stuck in bootloop, ROM running from SD

I have a Nook HD+ that suffers from the emmc bug, so I'm trying to load a rom into the sd card.
I tried burning several recovery images but only one booted properly(early 7) others went to emmc recovery directly(dunno why).
When I finally got into recovery I adbed ROM and Gaps into the tablet, then flashed them, upon reboot i always happened to go back to recovery, so I replaced uImage(i tried 2) in the SD Card with one that i found on xda, now after reboot I did see the boot animation, but it is shifted to the right and stuck in a boot loop.
What did I do wrong?

mmk92 said:
I have a Nook HD+ that suffers from the emmc bug, so I'm trying to load a rom into the sd card.
I tried burning several recovery images but only one booted properly(early 7) others went to emmc recovery directly(dunno why).
When I finally got into recovery I adbed ROM and Gaps into the tablet, then flashed them, upon reboot i always happened to go back to recovery, so I replaced uImage(i tried 2) in the SD Card with one that i found on xda, now after reboot I did see the boot animation, but it is shifted to the right and stuck in a boot loop.
What did I do wrong?
Click to expand...
Click to collapse
If it always boots to recovery, you are in a recovery bootloop. Go to my HD/HD+ CWM thread linked in my signature and read item 10.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
If it always boots to recovery, you are in a recovery bootloop. Go to my HD/HD+ CWM thread linked in my signature and read item 10.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
But thing is, I have a dead emmc, how can i flash the stock recovery?

mmk92 said:
But thing is, I have a dead emmc, how can i flash the stock recovery?
Click to expand...
Click to collapse
I thought you said it booted to emmc recovery. How can you have a dead emmc and still boot to that?
Sent from my BN NookHD+ using XDA Premium HD app

It boots into emmc recovery but I get a lot of "Can't mount" errors. I got this nook from a friend a few days ago, thought I'd fix it up somehow to boot it up from sdcard.
Do you think that I have a chance of booting from internal memory since Emmc recovery works?

mmk92 said:
It boots into emmc recovery but I get a lot of "Can't mount" errors. I got this nook from a friend a few days ago, thought I'd fix it up somehow to boot it up from sdcard.
Do you think that I have a chance of booting from internal memory since Emmc recovery works?
Click to expand...
Click to collapse
Put that stock recovery on it and see what it does. It is trying to repair itself by trying to boot to stock recovery. It cannot get worse than it is. You can use that early 7 SD to flash it.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
Put that stock recovery on it and see what it does. It is trying to repair itself by trying to boot to stock recovery. It cannot get worse than it is. You can use that early 7 SD to flash it.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I flashed the recovery onto it, I get "error mounting emmc" and flash was successful(weird).
Anyway I'm trying to install a noemmc rom, out of all the noemmc recoveries that I have tried, only one seemed to work, all others loaded straight to emmc recovery. What do you think is the problem?

mmk92 said:
I flashed the recovery onto it, I get "error mounting emmc" and flash was successful(weird).
Anyway I'm trying to install a noemmc rom, out of all the noemmc recoveries that I have tried, only one seemed to work, all others loaded straight to emmc recovery. What do you think is the problem?
Click to expand...
Click to collapse
Did you boot without the SD in after flashing? If so, what did it do?
Booting only to the early 7 SD is normal with a messed up emmc.
You need to start the SD burning again after formatting it with SDFormatter. Do not change any files on it after flashing the ROM.
Sent from my BN NookHD+ using XDA Premium HD app

I erased it with SDFormatter then used disk imager to flash the image on the sdcard, I am still getting the same results for this recovery in particular(which was recommended by verygreen for his dead emmc work ouround).
Basically after I boot the tablet, the recovery logo shows up longer than usual, then the recovery shwos up with EMMC RECOVERY written on the top left of the screen. But this emmc recovery is different than the one that usually shows up when I boot without the sd card, same names but the UI has a slightly differnet layout.
This is so weird, what should I do? I really want to get this tab working

mmk92 said:
I erased it with SDFormatter then used disk imager to flash the image on the sdcard, I am still getting the same results for this recovery in particular(which was recommended by verygreen for his dead emmc work ouround).
Basically after I boot the tablet, the recovery logo shows up longer than usual, then the recovery shwos up with EMMC RECOVERY written on the top left of the screen. But this emmc recovery is different than the one that usually shows up when I boot without the sd card, same names but the UI has a slightly differnet layout.
This is so weird, what should I do? I really want to get this tab working
Click to expand...
Click to collapse
Not sure you answered my question. It did not boot to stock recovery when you booted without the SD inserted? Stock recovery looks entirely different than CWM. Just a nook screen. It should not have a cyanoboot screen (is that what you are calling the recovery logo?). And it should try to automatically repair itself.
And if you want to install verygreen's noemmc ROM on SD you MUST use his image from that post. And do not change any files.
Sent from my BN NookHD+ using XDA Premium HD app

I got it fixed!! After 7hours of trial and error I finally got it working, is this problem very common? I am willing to write a very comprehensive guide for recoverying a dead nook, with all problems that I faced and a compilation of threads, posts, and users that helped recover the tablet from the dead.

mmk92 said:
I got it fixed!! After 7hours of trial and error I finally got it working, is this problem very common? I am willing to write a very comprehensive guide for recoverying a dead nook, with all problems that I faced and a compilation of threads, posts, and users that helped recover the tablet from the dead.
Click to expand...
Click to collapse
I don't need a comprehensive guide, just basically what it was that worked.
Sent from my BN NookHD+ using XDA Premium HD app

Stuck in bootloop
Hi LeapLinar,
I'm running into the same issue - recovery bootloop in CWM.
As per the instructions in this thread, I flashed stock recovery but I still got the Cyanoboot logo when rebooting and I also tried flashing your rooted stock 2.1.1 but it got stuck at 99% when rebooting to stock ROM.
Any suggestions ? Should I do a hard reset ?
Thanks

freekyin said:
Hi LeapLinar,
I'm running into the same issue - recovery bootloop in CWM.
As per the instructions in this thread, I flashed stock recovery but I still got the Cyanoboot logo when rebooting and I also tried flashing your rooted stock 2.1.1 but it got stuck at 99% when rebooting to stock ROM.
Any suggestions ? Should I do a hard reset ?
Thanks
Click to expand...
Click to collapse
Please don't post the same question in two different threads. I answered you in the other thread.
Sent from my BN NookHD+ using XDA Premium HD app

Sure. Thank you.

Have broken my Ovation with an OTA CM11 update

I mistakenly tried the OTA update from 10.2 to 11 (EMMC) with TWRP 2.5 I think. It failed and would not boot. I then tried doing a factory reset and reinstalling a 10.2 ROM I found on the internal SD card and it completed (no red FAILED) but would not go beyond the offset circular boot screen. I now tried flashing the cwm-recovery-ovation-6.zip which was successful but when I try to load any new ROM from an SD card I get E: Can't mount /external_sd.
I presume I'm missing something. I don't think I formatted the bootdata folder I see mentioned a lot.
Sent from my SM-N900T using XDA Premium 4 mobile app

Bob Simons said:
I mistakenly tried the OTA update from 10.2 to 11 (EMMC) with TWRP 2.5 I think. It failed and would not boot. I then tried doing a factory reset and reinstalling a 10.2 ROM I found on the internal SD card and it completed (no red FAILED) but would not go beyond the offset circular boot screen. I now tried flashing the cwm-recovery-ovation-6.zip which was successful but when I try to load any new ROM from an SD card I get E: Can't mount /external_sd.
I presume I'm missing something. I don't think I formatted the bootdata folder I see mentioned a lot.
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Do you still have the original backup or one from just after you install CM10.2? It might be worth just restoring that using the SD CWM you backedup with.

If the above doesn't work restore to stock grab both stock recovery and ROM from lepinar and get back to a known working state and try again.

what do you mean?
Is there a reason why the CWM is not good? Isn't this a ROM issue, like trying to flash CM 11 with an outdated recovery? and if so, don't I just need to understand how to install a clean 10.2 again?
jpisini said:
If the above doesn't work restore to stock grab both stock recovery and ROM from lepinar and get back to a known working state and try again.
Click to expand...
Click to collapse

You may be able to just recover but when I run into issues I find it easier to return to stock and try again. It works for me.
Sent from my BN NookHD+ using xda app-developers app

Bob Simons said:
Is there a reason why the CWM is not good? Isn't this a ROM issue, like trying to flash CM 11 with an outdated recovery? and if so, don't I just need to understand how to install a clean 10.2 again?
Click to expand...
Click to collapse
The CWM for CM11 (6045 or 6046) is not compatible with older versions of zips and older CWMs are not compatible with CM11.
If you have an older version of CWM you can use it to flash CM10.2, but you will need to do a factory reset with the CWM before rebooting after flashing to clear out the mess the bad CM11 install created.
Sent from my SCH-i705 using XDA Premium HD app

can you point me to the sets of files that work together?
So I see I have CWM 6.0.4.6 on the device. I can do a factory reset and then install CM11 directly or I have to go back to an old CWM and 10.2 first?
How about the issue where 6.0.4.6 does not read the SD card? I tried 2 and 16 gig cards, both EXFat and FAT32. Is that get resolved by the factory reset, or am I formatting the card wrong, or what? Unless there's a general impression that CM11 is not ready, I'd rather go to 11 unless it's necessary to go back first. Do I need to use the internal SD card and if so, how to I mount it to the PC when it's broken like this? Is there a button combination that makes it accessible through Odin or similar?
In the mess I got myself in, I'm to understand that the OTA is always fatal because the recovery does not accompany the flash, and the two are mutualy exclusive? In other words, I need to download the new recovery, the ROM and GAPPS and do all three at the same time to go from 10.2 to 11? But after that, OTAs are OK?
leapinlar said:
The CWM for CM11 (6045 or 6046) is not compatible with older versions of zips and older CWMs are not compatible with CM11.
If you have an older version of CWM you can use it to flash CM10.2, but you will need to do a factory reset with the CWM before rebooting after flashing to clear out the mess the bad CM11 install created.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse

Bob Simons said:
So I see I have CWM 6.0.4.6 on the device. I can do a factory reset and then install CM11 directly or I have to go back to an old CWM and 10.2 first?
How about the issue where 6.0.4.6 does not read the SD card? I tried 2 and 16 gig cards, both EXFat and FAT32. Is that get resolved by the factory reset, or am I formatting the card wrong, or what? Unless there's a general impression that CM11 is not ready, I'd rather go to 11 unless it's necessary to go back first. Do I need to use the internal SD card and if so, how to I mount it to the PC when it's broken like this? Is there a button combination that makes it accessible through Odin or similar?
In the mess I got myself in, I'm to understand that the OTA is always fatal because the recovery does not accompany the flash, and the two are mutualy exclusive? In other words, I need to download the new recovery, the ROM and GAPPS and do all three at the same time to go from 10.2 to 11? But after that, OTAs are OK?
Click to expand...
Click to collapse
The sdcard issue is just with that version of CWM. Once you get CM11 installed the SD works. I don't know the answer on how to get the rom zip on internal. There is a thread for how to install kitkat (CM11). Maybe that tells you. http://forum.xda-developers.com/showthread.php?t=2602796
And whether to go to CM11 is your choice. I have not tried it because I don't think it is ready, but lots of folks like it.
Once you have 6046 on internal memory it is ok to use the OTA for CM11 updates. And you can update now directly without going back to CM10.2.
Sent from my BN NookHD+ using XDA Premium HD app

Is there a TWRP which works on both CM 10.2 and 11?
The port you refer to seems to require that the nook be operational to move the files from the external to Internal card so there are many extra steps to go from a dead machine to CM11. Unless there is a working TWRP. I know lots of people think TWRP is bad news: is it a possible solution for me or more problems?
I gather that you'd go back to 10.2 if this was yours? Is it the simpler solution? I'm not set on the bleeding edge.
leapinlar said:
The sdcard issue is just with that version of CWM. Once you get CM11 installed the SD works. I don't know the answer on how to get the rom zip on internal. There is a thread for how to install kitkat (CM11). Maybe that tells you. http://forum.xda-developers.com/showthread.php?t=2602796
And whether to go to CM11 is your choice. I have not tried it because I don't think it is ready, but lots of folks like it.
Once you have 6046 on internal memory it is ok to use the OTA for CM11 updates. And you can update now directly without going back to CM10.2.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse

Bob Simons said:
The port you refer to seems to require that the nook be operational to move the files from the external to Internal card so there are many extra steps to go from a dead machine to CM11. Unless there is a working TWRP. I know lots of people think TWRP is bad news: is it a possible solution for me or more problems?
I gather that you'd go back to 10.2 if this was yours? Is it the simpler solution? I'm not set on the bleeding edge.
Click to expand...
Click to collapse
There is a working TWRP somewhere but I don't know where.
And like the other user said, the best solution is to go back to stock and start over. Once on stock you can put all the files on internal and install anything you want. If it were mine I would go back to CM10.1.3 stable, which is what I use now.
To go back to stock go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM per item 1a, flash the plain stock zip from item 6 and do a factory reset with CWM.
Sent from my BN NookHD+ using XDA Premium HD app

thanks, that's what I'll do
And thanks for your help.
leapinlar said:
There is a working TWRP somewhere but I don't know where.
And like the other user said, the best solution is to go back to stock and start over. Once on stock you can put all the files on internal and install anything you want. If it were mine I would go back to CM10.1.3 stable, which is what I use now.
To go back to stock go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM per item 1a, flash the plain stock zip from item 6 and do a factory reset with CWM.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse

[Q] How to Wipe the Nook HD+ ?

Hey Guys,
so I've decided to sell my Nook HD+ and wanna make sure I deleted it properly.
I installed the CM 10.2 from this guide: http://forum.xda-developers.com/showthread.php?t=2317500
Is there anything else I need to do except using the standard Factory-Reset-wiping from the settings? (I also deleted the SD card and removed it ofc.)
As far as I remember I did use the Nook original software for a short time before I installed CM10... Is that gonna be an issue?
Thanks for your help!

BluBBa said:
Hey Guys,
so I've decided to sell my Nook HD+ and wanna make sure I deleted it properly.
I installed the CM 10.1.2 from this guide: http://forum.xda-developers.com/showthread.php?t=2317500
Is there anything else I need to do except using the standard Factory-Reset-wiping from the settings? (I also deleted the SD card and removed it ofc.)
As far as I remember I did use the Nook original software for a short time before I installed CM10... Is that gonna be an issue?
Thanks for your help!
Click to expand...
Click to collapse
It depends on what you want running on it when you sell it.
If you want to keep CM10.1 on it, go to CWM and factory reset and to clear your media files go to mounts and storage and format 'data and datamedia'.
If you want it back to stock, do the same wiping with CWM followed by flashing the plain stock zip from item 6 in my HD/HD+ CWM thread linked in my signature.
And having run stock for a while makes no difference.
Sent from my SCH-i705 using XDA Premium HD app

leapinlar said:
It depends on what you want running on it when you sell it.
If you want to keep CM10.1 on it, go to CWM and factory reset and to clear your media files go to mounts and storage and format 'data and datamedia'.
If you want it back to stock, do the same wiping with CWM followed by flashing the plain stock zip from item 6 in my HD/HD+ CWM thread linked in my signature.
And having run stock for a while makes no difference.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
Hello leapinlar, thanks for your response.
I want CM10.2 running on it, and thats also the one thats currently on it. (I typed in wrong before)
Uhm, as far as I remember I only got into CWM with the SD card, I created with your guide. Is there a combination boot into CWM the Nook? Or do I have to make a SD card again?
I didnt wanted to try it out because last time I tried to boot into it and I ended up restoring Stock Nook and had to start over... (Its been a while though)
/edit: so I found this, from http://forum.xda-developers.com/showthread.php?t=2032364
When you need to get into recovery, you can either do "reboot to recovery" in reboot menu (need to enable that in settings) or reboot the nook, and when you see original nook boot logo, press and hold power + home buttons for about 4 seconds.
Click to expand...
Click to collapse
but I cant find any reboot into CWM option and if i do the reboot + Nook+Power Button then I get a small window that asks me whether I want to factory reset or not..
I created a new SD card now and got into CWM and reinstalled CWM into eMMC and could boot into it afterwards. Then I factory reset and formatted "/data and /data/media (/sdcard)"
Thanks
Looks like its good to go! Man I'm sad to part my ways with it. ;_;