please help I am running bad boyz 1.3. I am s-off, h-boot 3.16.0.0000, radio 1.05.20.0227_2, cid 11111111. want to upgrade to bad boyz 1.5 what firmware do I install and or what order. sorry if this has been asked I have look all over the forms. just want to make sure I do it right.
Look here:
http://forum.xda-developers.com/showthread.php?t=2729170
Use the firmware for the 2.16.654.4 update listed in the first post if you have the HK version. For the standard version use firmware for the 2.16.651.4 update, also found in the first post.
firmware
Magnum_Enforcer said:
Look here:
http://forum.xda-developers.com/showthread.php?t=2729170
Use the firmware for the 2.16.654.4 update listed in the first post if you have the HK version. For the standard version use firmware for the 2.16.651.4 update, also found in the first post.
Click to expand...
Click to collapse
ok im on the non-hk it says If you have the non-HK handset & have not flashed HK firmware b4, you'll also need to flash the HK adsp firmware:1.54.654
then do I flash the non-hk 2016.654.4? I have not flashed any firmware as of yet.
Yes you can flash the non-HK version, then the ADSP firmware.
firmware
cms2525 said:
ok im on the non-hk it says If you have the non-HK handset & have not flashed HK firmware b4, you'll also need to flash the HK adsp firmware:1.54.654
then do I flash the 1.54.654? I have not flashed any firmware as of yet.
Click to expand...
Click to collapse
let me get this strait
#1flash non-hk 2.16.651.4
#2 flash adsp firmware:1.54.654
#3 flash bad boyz 1.5
in that order?
Yep:thumbup:
firmware
thanks for all the help:good:
cms2525 said:
thanks for all the help:good:
Click to expand...
Click to collapse
what is the difference between
2.16.651.4 Modified Firmware w/ modified hboot
and 2.16.651.4 Full Firmware from OTA
and witch one do I need?
cms2525 said:
what is the difference between
2.16.651.4 Modified Firmware w/ modified hboot
and 2.16.651.4 Full Firmware from OTA
and witch one do I need?
Click to expand...
Click to collapse
Full Firmware is the signed firmware from the OTA
Modified has stock recovery and boot.img/kernel removed and requires you to be s-off.
Most folks that are s-off use the modified...if you go the Full route you will have to re-flash twrp and may have trouble booting if the kernel is not compatible with the rom you are running.
thanks think I got it now.
ok I got everything updated now I have no data when roaming all settings are right on phone and still no data on roam any ideas???
nm I fixed it
Related
Hi guys. I'm looking for the rom that came preinstalled on the Nordic HTC Ones. When I bought mine it came with 1.29.401.16 preinstalled and I want that back, in case I ever need to go stock. When I started tampering with my phone I didn't pay any mind to backing up the stock rom. It has to be completely stock and odexed. I do not want Mike's stock rom as that's for Europe, and I'm looking for a Nordic rom.
The reason I want the Nordic rom is because I want Nordic updates. Whatever base Mike uses has the cid HTC__001 which is a Europe cid.
If any Nord could help me out, I'd be most appreciative.
Theshawty said:
Hi guys. I'm looking for the rom that came preinstalled on the Nordic HTC Ones. When I bought mine it came with 1.29.401.16 preinstalled and I want that back, in case I ever need to go stock. When I started tampering with my phone I didn't pay any mind to backing up the stock rom. It has to be completely stock and odexed. I do not want Mike's stock rom as that's for Europe, and I'm looking for a Nordic rom.
The reason I want the Nordic rom is because I want Nordic updates. Whatever base Mike uses has the cid HTC__001 which is a Europe cid.
If any Nord could help me out, I'd be most appreciative.
Click to expand...
Click to collapse
i am not gonna give it to you!!!!
xxx.401.xxx is WWE . not nordic not central not east.
there isn't a base only for HTC_001. 401 is for 001 and another 12 cids. so no. there is no nordic stuff. it is WWE for europe unbranded devices
baadnewz said:
xxx.401.xxx is WWE . not nordic not central not east.
there isn't a base only for HTC_001. 401 is for 001 and another 12 cids. so no. there is no nordic stuff. it is WWE for europe unbranded devices
Click to expand...
Click to collapse
Uh, okay? Which means what, exactly?
I'm looking to return my device to stock as it came when I bought it and it had the update 1.29.401.16 installed. When I went to stock last time and I used the Europe RUU, I could only get to 1.29.401.12 via OTA, and not .16 as I had hoped. Which is odd.
The RUU I used last time was called "RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed"
OTA went only up to .12. Newer phones came preinstalled with .13 or .16. For example my phone came with .13 preinstalled. When I ruu-ed I only got .12 update.
so you are safe. you will get the 4.2.2 OTA when it will be released.
baadnewz said:
OTA went only up to .12. Newer phones came preinstalled with .13 or .16. For example my phone came with .13 preinstalled. When I ruu-ed I only got .12 update.
so you are safe. you will get the 4.2.2 OTA when it will be released.
Click to expand...
Click to collapse
Instead of having to use the RUU to flash, can I just flash mike's 1.29 and flash the recovery image in fastboot, set S-ON and then relock using revone?
Or is it necessary to use the RUU?
Theshawty said:
Instead of having to use the RUU to flash, can I just flash mike's 1.29 and flash the recovery image in fastboot, set S-ON and then relock using revone?
Or is it necessary to use the RUU?
Click to expand...
Click to collapse
yes just get odexed version, return to stock recovery. you don't need to go back to s-on nor to lock your device again. just make sure the rom is pure stock and odexed and your recovery is stock
baadnewz said:
yes just get odexed version, return to stock recovery. you don't need to go back to s-on nor to lock your device again. just make sure the rom is pure stock and odexed and your recovery is stock
Click to expand...
Click to collapse
Ah, okay. Gonna lock it and S-ON though. I can S-OFF and unlock in seconds anyways.
Hi guys, I need your help. I have an HTC One from Bell Mobility. I have done the full GPE conversion on it but have since got a Nexus 5 so I want to sell the One but need to get it back to a Sense ROM that will get OTA's. Whether it be Bell or Dev Edition or International. But I can't get an RUU to install. Right now the phone is GPE 4.3 not rooted with custom recovery. It was on stock recovery when I was trying to install the Dev Edition RUU but I got error 155. So I relocked the bootloader and tried again and again I got error 155.
What can I do to get a stock RUU to install?
Thanks
Mate, flash a firmware like 3.62 or 2.24, use the guru reset and after relock all
Thanks for replying, forgive me I don't know some of what you are referring to. What is the guru reset?
I see what you are referring to now, thank you. Had no idea this existed.
I'll give it a try.
Do you know which of the M7's listed are for the International version? What is the difference between a 2.24 ROM and 3.62?
Sorry for all the questions.
mr mystery said:
Do you know which of the M7's listed are for the International version? What is the difference between a 2.24 ROM and 3.62?
Sorry for all the questions.
Click to expand...
Click to collapse
2.24 is android 4.2.2, 3.62 is android 4.3.
So, both are for International version and remember to flash a firmware with the same version of rom
Guich said:
2.24 is android 4.2.2, 3.62 is android 4.3.
So, both are for International version and remember to flash a firmware with the same version of rom
Click to expand...
Click to collapse
Again thanks for the help, what do you mean by this last part? Flash 3.62 firmware to get 4.3?
is there a 4.06.651.11 firmware update somewhere? i'm on 4.06.651.4 and was wonder if there was a newer firmware i can flash?
rchris494 said:
is there a 4.06.651.11 firmware update somewhere? i'm on 4.06.651.4 and was wonder if there was a newer firmware i can flash?
Click to expand...
Click to collapse
Are you rooted? If so then you prolly have to do what I did a few days ago, I RUU'd . Then I updated to the .9 firmware then rerooted, I am s-off so I didn't go through htcdev again.
I think though*correct me if I'm wrong* that the .11 firmware is for the international version.
Hello
I am still confused about flashing firmwares. I am S-OFF, but I read all the time about people bricking their phones when updating firmware. So here is my question.
My bootloader says HBOOT-1.44.0000 and RADIO-4A.21.3263.04.
Is it safe to flash for example 6.09.401.10 firmware with 1.57.0000 HBOOT? I am using international version of the phone.
Thank you.
Patoo4800 said:
Hello
I am still confused about flashing firmwares. I am S-OFF, but I read all the time about people bricking their phones when updating firmware. So here is my question.
My bootloader says HBOOT-1.44.0000 and RADIO-4A.21.3263.04.
Is it safe to flash for example 6.09.401.10 firmware with 1.57.0000 HBOOT? Thank you.
Click to expand...
Click to collapse
It depends on the firmware .. some firmware are pulled from an OTA and are not as complete as a firmware pulled from a RUU.
to be safe the recommend route is to flash all the firmwares up to the current one, so if you are on 1.x.401.x now you would need to flash 2.x /3.x/4.x/5.x before continuing to the 6.x.401.x firmware.
Their is a shortcut - you could flash a 3.x/4.x RUU followed by the 5.x and 6.x firmware's
clsA said:
It depends on the firmware .. some firmware are pulled from an OTA and are not as complete as a firmware pulled from a RUU.
to be safe the recommend route is to flash all the firmwares up to the current one, so if you are on 1.x.401.x now you would need to flash 2.x /3.x/4.x/5.x before continuing to the 6.x.401.x firmware.
Their is a shortcut - you could flash a 3.x/4.x RUU followed by the 5.x and 6.x firmware's
Click to expand...
Click to collapse
Thank you for clarifying.
I have a few questions,I've never updated my firmware ever and I have been having bad signal I want to update my firmware along with the radio I know they are bundled I'm on ViperOneM9 port for the m7 but my question is when I updated since it's a port I have build 1.40.401.8 which is the M9s build so do I have to update to M9 firmware or the M7 ,also there's been a new firmware released last week I wanted to know if I can update that one and does the hboot number have to match and still also need to relock my bootloader I have s off and super cid thanks in advance for your replies ,the link to other xda thread is here
DaveedDB said:
I have a few questions,I've never updated my firmware ever and I have been having bad signal I want to update my firmware along with the radio I know they are bundled I'm on ViperOneM9 port for the m7 but my question is when I updated since it's a port I have build 1.40.401.8 which is the M9s build so do I have to update to M9 firmware or the M7 ,also there's been a new firmware released last week I wanted to know if I can update that one and does the hboot number have to match and still also need to relock my bootloader I have s off and super cid thanks in advance for your replies ,the link to other xda thread is here
Click to expand...
Click to collapse
If your phone is S-OFF you don't need to relock the bootloader to flash the firmware. Never flash firmware that are not made for the M7 on your M7, this will brick your phone. In you case you can flash the 7.19.401.2 firmware and then flash the 7.19.401.22, 7.19.401.30 and 7.19.401.51 firmware patches incrementally.
https://www.androidfilehost.com/?fid=95916177934534374
https://www.androidfilehost.com/?fid=23991606952612938
https://www.androidfilehost.com/?fid=24052804347799798
https://www.androidfilehost.com/?fid=24269982087013815
Code:
fastboot oem rebootRUU
fastboot flash zip <file_name>.zip
fastboot flash zip <file_name>.zip
fastboot reboot-bootloader
You do these commands for each files above
alray said:
If your phone is S-OFF you don't need to relock the bootloader to flash the firmware. Never flash firmware that are not made for the M7 on your M7, this will brick your phone. In you case you can flash the 7.19.401.2 firmware and then flash the 7.19.401.22, 7.19.401.30 and 7.19.401.51 firmware patches incrementally.
https://www.androidfilehost.com/?fid=95916177934534374
https://www.androidfilehost.com/?fid=23991606952612938
https://www.androidfilehost.com/?fid=24052804347799798
https://www.androidfilehost.com/?fid=24269982087013815
Code:
fastboot oem rebootRUU
fastboot flash zip <file_name>.zip
fastboot flash zip <file_name>.zip
fastboot reboot-bootloader
You do these commands for each files above
Click to expand...
Click to collapse
Thank you alray everything went perfect ,and thanks for the downloads also
Will this erase phonecontents?
Do I need to reflash custom recovery afterwards?
Regards, Mike
sp5it said:
Will this erase phonecontents?
Do I need to reflash custom recovery afterwards?
Regards, Mike
Click to expand...
Click to collapse
no
yes
Hi. I flashed that without problems but...
WiFi and 4g transfer speeds are very low. I run kk 4.4.3
Mike
sp5it said:
Hi. I flashed that without problems but...
WiFi and 4g transfer speeds are very low. I run kk 4.4.3
Mike
Click to expand...
Click to collapse
Yo do realize the file posted above are Lollipop based firmware? Why flashing it if using Kitkat? You should always use the correct firmware for your android version for better performances and stability.
So I found
6.09.401.10
6.09.401.11
6.09.401.12
Should I flash those incrementally or just 6.09.401.12 ?
Salute, Mike
sp5it said:
So I found
6.09.401.10
6.09.401.11
6.09.401.12
Should I flash those incrementally or just 6.09.401.12 ?
Salute, Mike
Click to expand...
Click to collapse
Better to flash the one that match your software version and make sure that you are using a complete firmware.zip file, not only a firmware.zip extracted from an ota update.
Is that complete firmware? https://www.androidfilehost.com/?fid=24269982087019285
Contains 17 files.
Mike
sp5it said:
Is that complete firmware? https://www.androidfilehost.com/?fid=24269982087019285
Contains 17 files.
Mike
Click to expand...
Click to collapse
it looks fine, but packed with twrp recovery instead of the stock recovery
So I flashed back KK firmware.
All went OK, but what I noticed coold boot is much slower than on LL firmware.
To double check I flashed LL again. All seems to be working fine on KK and LL firmware.
Thanks for help, Mike