May ask what version of Evervolv and gapps are the most stable together with the most features working, so That I may install them?
Anyone?
john510 said:
May ask what version of Evervolv and gapps are the most stable together with the most features working, so That I may install them?
Click to expand...
Click to collapse
I'm using Shumash's Rom and always found that the latest is the best or better than the last one, I would assume that the same applies to Evervolv just read the last couple of pages in the Rom thread as glitches are spotted and reported /commented on quickly.
As to gapps the same applies just select the PA gapps that suits you best http://forum.xda-developers.com/showthread.php?t=2397942
Have fun.
sstar said:
I'm using Shumash's Rom and always found that the latest is the best or better than the last one, I would assume that the same applies to Evervolv just read the last couple of pages in the Rom thread as glitches are spotted and reported /commented on quickly.
As to gapps the same applies just select the PA gapps that suits you best http://forum.xda-developers.com/showthread.php?t=2397942
Have fun.
Click to expand...
Click to collapse
Link to the rom? and installation instructions
john510 said:
Link to the rom? and installation instructions
Click to expand...
Click to collapse
It appears 4.3.1 is the version of Evervolv that has the most working..
Is there any app to put on to automatically shut down the system when battery reaches a certain level ?
john510 said:
It appears 4.3.1 is the version of Evervolv that has the most working..
Is there any app to put on to automatically shut down the system when battery reaches a certain level ?
Click to expand...
Click to collapse
I use Automatelt .
sstar said:
I use Automatelt .
Click to expand...
Click to collapse
thank you!:good::good:
Related
Hello : what difference between ?
-------------
stable update-cm-7.1.0-GalaxyS-signed.zip
md5sum: 9b0080373d67fdf1f88c54d08113c9aa 98.26 MB 2011-10-10 02:18:08
------------------------------------------------------------------------------
nightly cm_galaxysmtd_full-165.zip
md5sum: adbc1a2c9b869aa9e4bd2a0001d61ce5 97.49 MB 2011-10-31 11:33:22
seghier said:
Hello : what difference between ?
-------------
stable update-cm-7.1.0-GalaxyS-signed.zip
md5sum: 9b0080373d67fdf1f88c54d08113c9aa 98.26 MB 2011-10-10 02:18:08
------------------------------------------------------------------------------
nightly cm_galaxysmtd_full-165.zip
md5sum: adbc1a2c9b869aa9e4bd2a0001d61ce5 97.49 MB 2011-10-31 11:33:22
Click to expand...
Click to collapse
7.1.0 stable = nightly #143 IIRC, so it's just older version of CM7..just go with latest nightly. You can read changes from changelog.
thank you
you use it . have you any problems with this nightly version ?
seghier said:
thank you
you use it . have you any problems with this nightly version ?
Click to expand...
Click to collapse
No I haven't noticed any problems so far..but I have used this only for 1 day so it's too early to say anything certain..
ok
i will test it also
thank you
Nightly is the latest and greatest cutting edge from CM, but is also more prone to more bugs. Stable is better for new CM users, or for those that "heavily rely" on their CM phones as their main or only phones...
Sent from my MB860 using xda premium
thank you ccrows
i tried stable mod and have many problems
seghier said:
thank you ccrows
i tried stable mod and have many problems
Click to expand...
Click to collapse
You could ask about them on the official CM7 thread. I would suggest flashing the latest Nightly, however.
thank you upichie
i ask but no answer
i will try th nightly version
There are certain problems that are known and have yet to be fixed with CM7. Developers are continuously updating it though—and that is what the Nightlies are (a new build released every night). If your problems are known issues, it may be awhile before you see a fix. But there may be simple solutions to fix whatever problems you're having.
thank you
i wait for new stable version because i can t use many application with cm7 . it fast and very nice
seghier said:
thank you
i wait for new stable version because i can t use many application with cm7 . it fast and very nice
Click to expand...
Click to collapse
The only applications you should have trouble getting to work are the Samsung ones. The reason they don't work is because they are dependent on Samsung's framework, which obviously isn't found in CM7.
Every other application, if supported by your phone, should work just fine.
upichie said:
The only applications you should have trouble getting to work are the Samsung ones. The reason they don't work is because they are dependent on Samsung's framework, which obviously isn't found in CM7.
Every other application, if supported by your phone, should work just fine.
Click to expand...
Click to collapse
So that means nightlys are better than stable ones.??
Kanwarthind said:
So that means nightlys are better than stable ones.??
Click to expand...
Click to collapse
Not always, I've had a few nightly builds go wrong but isn't hard to make a nandroid backup. If in doubt use a stable build, I personally like the latest work from the CM7 team
seghier said:
thank you
i wait for new stable version because i can t use many application with cm7 . it fast and very nice
Click to expand...
Click to collapse
That is nothing new with CM and AOSP builds. They have know app compatibility issues. Some apps just will not work like Screenshot it. It will work on every custom rom except for CM and any rom built off of it/
sorry for ignorance
can i flash a stable on a nighlty previously installed???
thx
There are 2 stable versions
Cm7
Cm9 that's ICS
Cm10 (jellybean) is currently being developed
Just noticed that this topic is from 2011
Sent from my GT-I9000
can i flash a stable on a nighlty previously installed???
Click to expand...
Click to collapse
Yes, of course!
I have to install the latest build 2013-03-10 to my galaxy mini. i follow the below thread
http://forum.xda-developers.com/showthread.php?t=2085347
since its 4.2.2 i wanted to know if there is an 'official' release of GApps 4.2.2, and whether i should install it. Or if GApps 4.2.1 is the latest, is it already included within the build i mentioned above?
Thank u.
My sincere thanks to erikcas and rohan007.
whitebeatle said:
I have to install the latest build 2013-03-10 to my galaxy mini. i follow the below thread
http://forum.xda-developers.com/showthread.php?t=2085347
since its 4.2.2 i wanted to know if there is an 'official' release of GApps 4.2.2, and whether i should install it. Or if GApps 4.2.1 is the latest, is it already included within the build i mentioned above?
Thank u.
My sincere thanks to erikcas and rohan007.
Click to expand...
Click to collapse
NO need to flash gapps. its already included in the rom.(atleast the basics)
I was thinking of getting google now for 4.2.2 on mini. Please post if that becomes possible.
prafiles said:
I was thinking of getting google now for 4.2.2 on mini. Please post if that becomes possible.
Click to expand...
Click to collapse
not much, no...
Rohit02 said:
NO need to flash gapps. its already included in the rom.(atleast the basics)
Click to expand...
Click to collapse
the one included does not have 'google now'. Or as u said only has the basic apps. Anyway, Now i have installed the latest build . should i update the gapps now? because i tried to install gapps as soon as i installed the rom n the rom was not behaving properly. (like i cant get the browser to work and stuff like that). so i thought may be after configuring the os syncing my google accounts the GApps upgrade works..?
Thanks
I upgraded my P1000 from cm-10.1-20131117-NIGHTLY-p1.zip to cm-11-20131210-NIGHTLY-p1.zip
After the update it was kinda working fine. Gapps did not work yet since I did not upgrade that yet, so I installed pa_gapps-full-4.4-20131126-signed.zip.
And rebooted.
That's where the trouble started.
Apps crashed and the P1000 did not startup fine.
I decided to do a full wipe, cleared all caches and re-flashed the P1000.
I does not start anymore (stays on the CM11 boot screen).
What did I miss?
It's not your fault.
It's many different but similar errors in past few days on experimental CM11 builds.
Read http://forum.xda-developers.com/showthread.php?t=2560605 for example.
MarviXDA said:
It's not your fault.
It's many different but similar errors in past few days on experimental CM11 builds.
Read http://forum.xda-developers.com/showthread.php?t=2560605 for example.
Click to expand...
Click to collapse
Thanks,
It seems I updated to CM11 a bit to early, having confidence
If there is someone having a glorious idea...I'm open to those, hehe....
I flashed back to cm10... Maybe it was a bit too early to go to CM11....
This thread can be closed
brenzef said:
I flashed back to cm10... Maybe it was a bit too early to go to CM11....
This thread can be closed
Click to expand...
Click to collapse
Your original problem was using PA GAPPS full. Its to big for the /system partition. You should use one of the BaNkS Gapps versions instead. CM11 runs extremely well on SGT 7, especially after switching to ART.
ulev said:
Your original problem was using PA GAPPS full. Its to big for the /system partition. You should use one of the BaNkS Gapps versions instead. CM11 runs extremely well on SGT 7, especially after switching to ART.
Click to expand...
Click to collapse
That was a very good tip!!!!!
THANKS, upgraded to CM11 with BaNkS Gapps.
+1
brenzef said:
That was a very good tip!!!!!
THANKS, upgraded to CM11 with BaNkS Gapps.
+1
Click to expand...
Click to collapse
Glad I could be of help.
I haven been here for a while please remove my thread if this is not apporiate or have been asked b4
I been following androidarmv6 on jenkins though and realized they have been updating kitkat roms
theres even a stable version dated 18 May 2014
I tried the lastest nightly as of 31 May 2014 video camera is not working yet
So these ROMs are built by armv6 team or?
http://jenkins.androidarmv6.org/view/All/job/cm-ota/
http://download.androidarmv6.org/_builds/cooper/
mudkipstar said:
I haven been here for a while please remove my thread if this is not apporiate or have been asked b4
I been following androidarmv6 on jenkins though and realized they have been updating kitkat roms
theres even a stable version dated 18 May 2014
I tried the lastest nightly as of 31 May 2014 video camera is not working yet
So these ROMs are built by armv6 team or?
http://jenkins.androidarmv6.org/view/All/job/cm-ota/
http://download.androidarmv6.org/_builds/cooper/
Click to expand...
Click to collapse
Yes, these roms are built by androidarmv6 team. Haven't personally tried the new one's, so can't say more about those roms. Hope I Helped
thanks for the reply, theres recently a stable built released, is it really stable or? Can someone from armv6 answer this hahas?
mudkipstar said:
thanks for the reply, theres recently a stable built released, is it really stable or? Can someone from armv6 answer this hahas?
Click to expand...
Click to collapse
Yes, there're here CM11 STABLE Releases
You'll need CWM 6.x recovery, a based CWM6 recovery or TWRP 2.7.0.0 recovery to flash those ROM correctly
Finally here you'll find CM11/OMNI/OMEGA roms, you can flash using a CWM 5.x based recovery
Viper The Ripper said:
Yes, there're here CM11 STABLE Releases
You'll need CWM 6.x recovery, a based CWM6 recovery or TWRP 2.7.0.0 recovery to flash those ROM correctly
Finally here you'll find CM11/OMNI/OMEGA roms, you can flash using a CWM 5.x based recovery
Click to expand...
Click to collapse
thx for the tip , what are the known bugs in CM11 for now?
I think that those releases are also the same as in this topic: http://forum.xda-developers.com/showthread.php?t=2659269
skoda9635 said:
I think that those releases are also the same as in this topic: http://forum.xda-developers.com/showthread.php?t=2659269
Click to expand...
Click to collapse
Exactly. The author has only modified the update-script so that we can flash it from CWM 5 rather than from CWM 6
mudkipstar said:
thx for the tip , what are the known bugs in CM11 for now?
Click to expand...
Click to collapse
AFAIK video recording and maybe fm radio
mudkipstar said:
thx for the tip , what are the known bugs in CM11 for now?
Click to expand...
Click to collapse
i try most of them even the new one..
thing is they r stables but full off bug
video doesn't work
fm same problem;
same time it lost sdcard req reboot..
very slow; and it have a problem with file explore. i didn't show any file same time..
work well without gapp (my experience)
s.tanbin said:
i try most of them even the new one..
thing is they r stables but full off bug
video doesn't work
fm same problem;
same time it lost sdcard req reboot..
very slow; and it have a problem with file explore. i didn't show any file same time..
work well without gapp (my experience)
Click to expand...
Click to collapse
I can manage without FM
But I must have video
I hope it will be soon...
ronca79 said:
I can manage without FM
But I must have video
I hope it will be soon...
Click to expand...
Click to collapse
Bro, try this fix by MM7. Here is the link,
[PATCH] Video recording fix for CM11
Do post the result. Hope I Helped
mahithm said:
Bro, try this fix by MM7. Here is the link,
[PATCH] Video recording fix for CM11
Do post the result. Hope I Helped
Click to expand...
Click to collapse
is it for any 4.4.x cm / omni / omega release ?
ronca79 said:
is it for any 4.4.x cm / omni / omega release ?
Click to expand...
Click to collapse
Yes.
mahithm said:
Yes.
Click to expand...
Click to collapse
I'm searching this patch for few months.
The main problem is the development section and the original development section .... :crying:
Anyway... everything works great
You got already my 10x.
ronca79 said:
I'm searching this patch for few months.
The main problem is the development section and the original development section .... :crying:
Anyway... everything works great
You got already my 10x.
Click to expand...
Click to collapse
Glad I could help buddy
Hi all,
I have just re-started to use my Galaxy S after it sitting in a draw for 18 months. It currently has Rombox Beast V3.0 as the rom, and the Play Store app is miles out of date, which I am guessing is the reason for me getting errors when trying to update/download any apps.
Can I have some recommendation as to a ROM I can drop in and flash over the top of what I have, + gapps if needed, to get the phone functioning again.
Thanks
Swilly
Swilly said:
Hi all,
I have just re-started to use my Galaxy S after it sitting in a draw for 18 months. It currently has Rombox Beast V3.0 as the rom, and the Play Store app is miles out of date, which I am guessing is the reason for me getting errors when trying to update/download any apps.
Can I have some recommendation as to a ROM I can drop in and flash over the top of what I have, + gapps if needed, to get the phone functioning again.
Thanks
Swilly
Click to expand...
Click to collapse
In my opinion last Mackay KitKat Rom is the best choice for our old Galaxy...
And Dirty 8 is not bad...
Thanks both ... downloading bits and pieces at present
For the Mackay Rom, which of the various Gapps do you recommend with it
Thanks
Swilly
Swilly said:
Thanks both ... downloading bits and pieces at present
For the Mackay Rom, which of the various Gapps do you recommend with it
Thanks
Swilly
Click to expand...
Click to collapse
I will recommend PA Gapps as these are most updated: http://forum.xda-developers.com/showthread.php?t=2397942
Personally I'm using Micro Modular Package, here's direct download link: https://s.basketbuild.com/devs/TKruzze/Android 4.4.4 GApps/Mini-Modular GApps/
And you can of course use PA Gapps Remover if you doesn't need any app from the package: http://forum.xda-developers.com/showthread.php?p=50684852
Also please post in the right section. This is the development section and your thread is clearly a question :/ So please post in Q and A next time you have a question
Whatever ROM you flash please follow the instructions carefully. Bad things can happen if you don't
All that said I recommend CM11 / Mackay ROM and the smallest GAPPS package you can find
Nitro_123 said:
Also please post in the right section. This is the development section and your thread is clearly a question :/ So please post in Q and A next time you have a question
Whatever ROM you flash please follow the instructions carefully. Bad things can happen if you don't
All that said I recommend CM11 / Mackay ROM and the smallest GAPPS package you can find
Click to expand...
Click to collapse
Noted ... and thanks
Swilly
Hi all,
Thanks for your suggestions, I just have one issue now ... status 7 error while installing.
I realise from some other posts I need to flash CWM 6.03 or above (I prefer CWM to TWRP) in order to flash the ROMs, I know this is being lazy, but are there any posts out there with the necessary downloads ?? I have had a quick look ...
Cheers
Swilly