Database Develop

Did I brick my tab?

I was trying to flash Overcome rom on my new virgin tab and everything was going great. I rooted it with Superoneclick, apply protected bootloader, odin the file. It said Pass and my tab shut off. Now it wont turn on at all. I pressed and hold the power button and only the backlight comes on? I cant get it back to Download mode. Am i screwed?

aznknightz17 said:
I was trying to flash Overcome rom on my new virgin tab and everything was going great. I rooted it with Superoneclick, apply protected bootloader, odin the file. It said Pass and my tab shut off. Now it wont turn on at all. I pressed and hold the power button and only the backlight comes on? I cant get it back to Download mode. Am i screwed?
Click to expand...
Click to collapse
on my new virgin tab
Click to expand...
Click to collapse
+1 for that
-1 for posting this here in the General section ..
=1 which overcome you flashed ? ? ? gingerbread , or overcome 1.xx ? ?
and pls tell us more to help u ....
did u tried to plug your tab back to ur computer to check whether odin still can recognize it or no ?

The GB 2.0 Gold one. And unfortunately odin does not see my device.
(http://overcome.mimzo.com/?page_id=64)
About device: 2.2.1
Model #: GT-P1010

GT P1010 OMG OMG OMG .. did u even read what they said about P1010 ? ? ? ??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is this mean that you can't flash it ?
http://www.android-support.com/q-is-overcome-rom-compatible-with-galaxy-tab-p1010-wifi-only/ check this question .. omg dude ,my advice u may go visit the nearst samsung service center

Wow how did I miss that part. Sigh so theres no way even get to Download mode at all?

i got no idea , u may search on the Q|A section , you find all the same question .. do not post thread there because almost the threads there about this issue . good luck
NOTE : next time don't go through something without reading carefuly , you will get results will eat your nuts ...
good luck dude .

problem with upgrade firmware

Hi...
I am trying to upgrade the firmware of my Galaxy Si9000.
When I connect to Kies, I get a pop-up saying my firmware is PHONE:JP2 and a new upgrade PHONE:JV4 is available. I tried upgrading but once the process starts,
First I get an option to Backup Data.
Then, I see a window which says "Preparing device for Firmware Upgrade"
And that's it. After some time download begins , in between 50-60% its stops
The screen on the phone stays with the working man but nothing is being upgraded till the moment when Kies asks me for firmware recovery. Unplugging the phone and restarting brings it back to its original state.I tried doing 5 to 6 times but no help.
Any idea???
My Galaxy S is currently running on Android 2.1
Kies is updated to the latest version.
and
i also tried with the manual firmware update or any other custom ROM firmware update from the trusted source provided at AndroidAdvices.com, but the problem is my device doesn't go in download mode (Volume Down Key + OK button, and holding both simultaneously press the Power Button)...plz help me out........

1. Dear kumar, have you tried to multiply your question even more? I saw that you already asked this question in "Ask me for anything..." thread, and you have started new one... Maybe you shall ask in SG General? Maybe in SGS2 threads?
2. Buy a jig from eBay to go to download mode...

samsung galaxy si9000
instead of buying Jig ......is there any other alternative way to go in download mode?

use "adb reboot download"
You can update using the Heimdall One-Click from this thread: http://forum.xda-developers.com/showthread.php?t=1330491
http://files.teamkomin.com/i9000SGS/i9000-XXJVT-One-Click.jar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

samsung galaxy si9000
Hi....
Is it safe for my device if i use the website u provided http://forum.xda-developers.com/show....php?t=1330491 in that Part 2: Software Based Resurrection instead of Part 1: Hardware Modification........

kumar12345 said:
Hi....
Is it safe for my device if i use the website u provided http://forum.xda-developers.com/show....php?t=1330491 in that Part 2: Software Based Resurrection instead of Part 1: Hardware Modification........
Click to expand...
Click to collapse
They're the same link.

buy a jig on ebay

http://www.ebay.com/itm/Samsung-Gal...445900?pt=PDA_Accessories&hash=item3cbb7b1e8c

[Q] please help with my gt-i9000

my phone is gt-i9000 but I did a big mistake I upgraded with wrong firmware ( for gt-i9003) and now my phone is completely dead I can reboot it and also I can log in into download mode or recovery mode and nothing happen when I put the usb cable
please anyone can help me and what should I do ?

If download mode is still available, then try to flash the phone with a 3parted firmware with repartition ticked and 512pit selected via odin.
Please see my post i quote below, there you will find a restock kit which includes all you need. Just expand the zip and follow the quide in the txt file.
If odin does not recognice your device, I would first check via tast manager, wheather kies is completly stopped. No running processes anymore in the background?
And then try another usb port, this also could help.
Good luck and much success!
rodman01 said:
You can also try it with slappys rescuepack, which i always use, when i have or want to restock. Has all you need in that zip. and also a todo or guide.
Perhaps ou give it a try?
http://forum.xda-developers.com/showpost.php?p=29114573&postcount=2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=36168807&postcount=5

master0099 said:
my phone is gt-i9000 but I did a big mistake I upgraded with wrong firmware ( for gt-i9003) and now my phone is completely dead I can reboot it and also I can log in into download mode or recovery mode and nothing happen when I put the usb cable
please anyone can help me and what should I do ?
Click to expand...
Click to collapse
GOOD luck!!!!I believe your phone will be ok!1

GT-I9000 is completelly dead because of worng firmware upgrade(I9003).
My Samsung GT-I9000 is completelly dead because of worng firmware upgrade(I9003). Now what should i do...i tried for download mode but nothing happen....

Arvin121 said:
My Samsung GT-I9000 is completelly dead because of worng firmware upgrade(I9003). Now what should i do...i tried for download mode but nothing happen....
Click to expand...
Click to collapse
try all the other methods to get download mode as mentioned in My Android Solutions
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

[Q] Cyanogenmod only shows 'A N D R O I D' screen and locks up. Uh oh.

So, I think I went and done it. I think I bricked my Samsung Galaxy Ace S5830D while attmepting to flash Cyanogenmod. Dammit. I followed these installation instructions, then this happened:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It won't move from here. It just boots up, goes to this screen, and hangs. I can't boot into recovery mode. So, two questions:
Am I screwed?
How can I fix this?

I think you've tried the cm official rom. But my friend, as said a million times before, these roms are only for GT-S5830 & not GT-S5830 D. Your hope now is to flash stock rom via odin . Just try getting your phone into the downloading mode by using the combo, home+power+volume down ( of course with phone off ). If you get a screen with " Downloading " written on it, then you have hopes. If not you'll have to go for jtag or something, else a nearest service station is your last resort.
Sent from my GT-S5830 using xda premium

Technically the D should work, only i, V and C doesn't. Is a logcat possible?
Sent from my GT-I9070P

Follow the instructions from the forums. Phone appears to be bricked with just "ANDROID" being displayed and before any one asks my device is a Galaxy ace GT-S5830. I've got to the downloading screen on my phone. Where to next?
Any help would be much appreciated

dvorak2 said:
Follow the instructions from the forums. Phone appears to be bricked with just "ANDROID" being displayed and before any one asks my device is a Galaxy ace GT-S5830. I've got to the downloading screen on my phone. Where to next?
Any help would be much appreciated
Click to expand...
Click to collapse
You need to flash a fresh Stock rom via Odin
---------- Post added at 09:21 AM ---------- Previous post was at 09:07 AM ----------
Viper The Ripper said:
You need to flash a fresh Stock rom via Odin
Click to expand...
Click to collapse
Follow this guide HOW TO USE ODIN... this thread is really useful too ROOT,CWM,ODIN and JB Q&A Thread

Need help for a soft brick note 5

hey guys, i need some help here for my note 5.
I have a SM-N920I (note 5) which is an Australian Variant ( i assume, it was a replacement for my note 3).
I was on 5.1.1 (N920I) then when Android 6.0 first released, i have flashed my note 5 to 6.0.1 (N920G), and then have been using it for couple of months.
Recently, due to some reception problem, i need to flash it back to an Australian Variant rom, but i have forgot to take of the FRP lock. i used odin 3.12.3 to flash it to 6.0.1 (N920I), and half way through my phone turn off and restart. After that, i am not able to get into the system and show need to use emergency recovery.
I have tired flash both 920I and 920G stock roms, but all shows FRP lock, or some kind of error.
Also tried to use Smartswitch, but i cant find the S/N number anywhere in the box. so i used my friend's note 5 AU s/n, but still shows error.
do any one knows any other ways that i can try???? or is there anyone nice enough to let me try their I920G note 5 s/n to flash my note 5?

Go to developer option..enable OEM lock..that cause the opertion to flash will not done..FRP LOCK cause OEM not enable..go to setting>developer option>OEM..(enable it)
Did u turn on you developer option?if not..go to about device..search build num and press it untill show your are dev..check it out bro..good luck.
Sent from my SM-N9208 using Tapatalk
---------- Post added at 12:22 PM ---------- Previous post was at 12:20 PM ----------
smeth_90 said:
Go to developer option..enable OEM lock..that cause the opertion to flash will not done..FRP LOCK cause OEM not enable..go to setting>developer option>OEM..(enable it)
Did u turn on you developer option?if not..go to about device..search build num and press it untill show your are dev..check it out bro..good luck.
Sent from my SM-N9208 using Tapatalk
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N9208 using Tapatalk
---------- Post added at 12:27 PM ---------- Previous post was at 12:22 PM ----------
Flsah the same firmware that you use on note 5..or check at sammobile.com the free firmware that same mobile model and ver of firmware..good luck bro..i also face like this before this time..flash but forget to enable OEM LOCK..so i just install again my firmware that i use and get it back using odin..please read and search any method on another post..this will help you..?
Sent from my SM-N9208 using Tapatalk

Use emergency recovery at kies...
Sent from my SM-N9208 using Tapatalk