Im currently using CM11 Unofficial version.
http://forum.xda-developers.com/showthread.php?t=2735975
Can i upgrade it to nightly version. Not sure if nightly version is for UBL only, because my phone is LBL.
http://download.cyanogenmod.org/?type=nightly&device=huashan
If yes, may i know the step by step installation.
-wipe reset/ clean install new rom
- install cm11 nightly version
-reset factory
- install gapps
-reboot.
correct me if im wrong regarding to the installation process
I don't know what you mean by 'reset factory'. Everything else sounds like a go to me. :good:
Related
Hello, I was on the latest stable,
I tried installing the latest nightly - 19 using the cm updater. It said something about data has another partion please try to install again to confirm wiping /data
so i selected the zip again, it seem to install just fine but I cant get past the cyanogenmod logo.
I wiped both cache and installed it again but same problem. Any tips what to do next?
I think you mean Nightly of CM 10.2 ...
Use the newest nightly ,in one Nightly there was an error about installation.
The warning is because with the nightly beginning from 20130816 the partitioning layout have to be changed because of Out of space on /system...so the massage is only that you know it and you have to confirm it a second time ...
So test a newer nightly an it should work!!!
Here is the link to the thread of CM 10.2 ....http://forum.xda-developers.com/showthread.php?t=2385178 there are some additional infos ...
Let me no if it works ...
unrealbe said:
Hello, I was on the latest stable,
I tried installing the latest nightly - 19 using the cm updater. It said something about data has another partion please try to install again to confirm wiping /data
so i selected the zip again, it seem to install just fine but I cant get past the cyanogenmod logo.
I wiped both cache and installed it again but same problem. Any tips what to do next?
Click to expand...
Click to collapse
Hi,
I have the Touchpad installed with Milaq's nightly build 08/25 and the jb-app 2013/03 build.
Is there a way to update to latest Milaq's nightly build and latest jb-app 2013/08/12 without resetting the configuration in Touchpad and will have to re-install all the apps and their config/settings?
I was thinking to install the update via CWM-Clockmod, but afraid that I will have to re-install and reconfig all the apps.
Thanks,
Well, if nothing else, an app like MyBackup Root will be able to save all of your apks+their data. Plenty of other apps do it too, that is just the one I've used. Good luck.
You can try a dirty flash, meaning that you only wipe cache and dalvik (not system or data) when you flash it in recovery. Make sure to do a nandroid first.
There shouldn't be any issues when flashing the new nightly from the recovery (CWM or TWRP). Just remember to wipe cache and Dalvik cache before rebooting to CM.
I did an dirty update to the newest cm10.2 nightly coming from cm10.1 - no bad issues so far.
Be sure to make a backup of your old rom and simply try
Hey everyone, :laugh:
I found an Official update for my device from CyanogenMod Download Site.
I search any forum if available here about this ROM, unfortunately i cannot be able to find any form related to this ROM. Then i download 5.1 Gapps and download the ROM CyanogenMod 12.1. i wipe dalvik , userdata , cache and system. then flash both of the zip files ive downloaded. As i was using 12.0 Cyanogen i dont think i need to flash Cyanogen snapshot as it require for 12.0 to solve the BootLop. After flashing my phone is stuck on the booting animation since 20-25mins then i force reboot my phone into Recovery then i flash the SNAPSHOT and then reboot for once it works fine for me, then i just flash 12.1 and L gapps on the phone and then reboot, unforunately im facing the same problem from last hour. I dont know how to make 12.2 Cyan to work on my phone wihtout bootlop.
If anyone knows how to remove the bootlop then please let me know, thanks
Shehry_97 said:
Hey everyone, :laugh:
I found an Official update for my device from CyanogenMod Download Site.
I search any forum if available here about this ROM, unfortunately i cannot be able to find any form related to this ROM. Then i download 5.1 Gapps and download the ROM CyanogenMod 12.1. i wipe dalvik , userdata , cache and system. then flash both of the zip files ive downloaded. As i was using 12.0 Cyanogen i dont think i need to flash Cyanogen snapshot as it require for 12.0 to solve the BootLop. After flashing my phone is stuck on the booting animation since 20-25mins then i force reboot my phone into Recovery then i flash the SNAPSHOT and then reboot for once it works fine for me, then i just flash 12.1 and L gapps on the phone and then reboot, unforunately im facing the same problem from last hour. I dont know how to make 12.2 Cyan to work on my phone wihtout bootlop.
If anyone knows how to remove the bootlop then please let me know, thanks
Click to expand...
Click to collapse
Hmmm...I was on CM12 and wiped everything (cache, dalvik cache, system, data) so I clean flashed CM12.1 and GApps 5.1, after 2-3 mins it booted ok. So I guess flashing CM11 first is not needed. Just try again idk...:/
Hello guys! How are you?
I'm having some bugs with CyanogenMod 12.1 in my MotoG and haven't found nothing that could help me with my problem.
Well, here's the story:
My device had Android KitKat 4.4 as the stock rom and I updated it to Lollipop 5.0 before rooting.
Well, I unlocked the bootloader and used TWRP as a custom recovery and installed SuperSU.
I've been using the phone about almost 8 months after rooting and then, Motorola released an update, I tried to update it via OTA and, of course, it didn't worked since TWRP can't OTA. Nothing changed in my phone, I simply rebooted it and it worked but since a few days some apps started to suddenly close and/or stop.
I decided to install CyanogenMod 12.1, downloaded the latest nightly and a stock package of GApps and flashed them via TWRP.
Wiped Dalvik Cache, Data, Cache and System
At the first attempt, TWRP rebooted after flashing CM12.1 and I wiped the caches via WIPE menu before flashing GApps wich couldn't be installed because there was "no space in storage". Well, I booted my phone normally (running cm12) and downloaded a Micro GApps package and flashed it sucessfully.
Problem is: Clock stops working (it has stopped for now), I can't install some apps from PlayStore such as Facebook, etc and my phone appears to be unrooted.
I think my TWRP is bugged or something cause it does not works as tutorials, etc tells...It shows some errors and sometimes reboots itself after flashing some file.
Do you guys think I should reset everything and then redo all the steps to use CyanogenMod properly? I really liked this custom rom but I'm afraid there will be more bugs in the future....
Anyone?
my solution..
1. (JUST SAYING)You can install ota through fastboot. Use the ota file found in root.( There is a thread for this)
2. Try installing Lucas 2.8.7.0 build. Find it in his thread. Its posted there. It's somewhere in the sea of posts just find it.
3. Then try to clean flash cm 11 build. Then install cm 12.1 build.
4. See if it works.
I don't understand why you face this problem cause well TWRP is very stable.
Well see if it works and get back to me.
Edit :
Saved you some trouble here's the link for TWRP
Link : https://drive.google.com/file/d/0B0WGdtNWubBJVlctNE5PZ1oyQ00/view?pli=1
Its labelled as 2.8.7.0 but its actually 6.0 features of 7.0.
sagar846 said:
1. (JUST SAYING)You can install ota through fastboot. Use the ota file found in root.( There is a thread for this)
2. Try installing Lucas 2.8.7.0 build. Find it in his thread. Its posted there. It's somewhere in the sea of posts just find it.
3. Then try to clean flash cm 11 build. Then install cm 12.1 build.
4. See if it works.
I don't understand why you face this problem cause well TWRP is very stable.
Well see if it works and get back to me.
Edit :
Saved you some trouble here's the link for TWRP
Link : https://drive.google.com/file/d/0B0WGdtNWubBJVlctNE5PZ1oyQ00/view?pli=1
Its labelled as 2.8.7.0 but its actually 6.0 features of 7.0.
Click to expand...
Click to collapse
This is exactly what you should do.
There are several things that don't work as they supposed to do, so follow the steps @sagar846 mentioned.
Sent from somewhere
Oniganon said:
Anyone?
Click to expand...
Click to collapse
cm 12 and 12.1 have some little bugs still but it is useable for daily use
guys i want to revert back from cm 13 to cm 12.1 so, please let me know the procedure ,is it same procedure or i have to first install stock Lollipop rom .Please help.
There is no special procedure. Just clean flash (wipe system data dalvik and cache). Install ROM and gapps.
okk,Thanks
sagar846 said:
There is no special procedure. Just clean flash (wipe system data dalvik and cache). Install ROM and gapps.
Click to expand...
Click to collapse
so, i need to same step which i use to change one cm13 rom to another cm 13 rom.