[KERNEL][4.4.4] HodorKernel [.283/.292][ABANDONED] - Xperia Z Original Android Development

PREAMBLE
I have created this kernel because I needed something simple, but also features.
PLEASE NOTE: This kernel is intended for ROMs based on 10.5.A.0.283/292 only. Do not flash it on any AOSP firmware.
Please don't post bug reports if you don't use this kernel with a 10.5.A.0.283/292 ROM. They'll be ignored.
PLEASE READ
How to report a bug?
Include the following in your bug report:
The ROM you are currently using + a link to the ROM's thread
A log, preferably dmesgs or kmsgs (use Google to find out how to pull these from your device)
The version of HodorKernel you use (=date, e.g. 20141104)
Bug reports not meeting these requirements will be ignored.
NO BUG REPORTS ON EXPERIMENTAL BUILDS!​
FEATUREs
Kexec-hardboot
Compiled with @Christopher83 's latest Linaro GCC 4.9.3-2015.03 (optimized for Cortex-A15 cpu; with Neon-VFPv4 technology support) toolchain and O3
Enabled graphite
2-stage boot (android - recovery boot decision; recovery ramdisk inside)
CPU Overclock up to 1.7 GHz
Added 162 MHz and 270 MHz CPU clocks
GPU Overclock up to 487.5 MHz
MultiROM TWRP
In sync with CAF (as of branch kk_2.7_rb1.43)
Enabled and updated prima wlan (built as module) - Prima WLAN is also in sync with CAF (as of branch kk_2.7_rb1.43, commit 521992a1)
Overall stats for all available cores
Voltage Control
Forced fastcharge support
exFAT support
AnyKernel
Suspend backoff driver
LZ4-compressed
msm-sleeper this allows setting the maximal CPU frequency while the screen is off
KCAL
Fixed audio stuttering
Support for faux sound
New governors: intelliactive, wheatley and OndemandPLUS
LOADS of security patches (e.g. CVE-2014-4943, CVE-2014-0196, CVE-2014-3153, CVE-2014-9529, CVE-2014-9683, CVE-2014-8160, CVE-2015-1465, CVE-2015-1420, CVE-2014-8173 and CVE-2014-7970)
auto_hotplug driver
New IO schedulers: BFQ, SIO, FIOPS, ZEN and VR
sysfs for cdrom
LZ4 support+fixes
EXT4 fixes
Optimized ARM RWSEM algorithm (also updated from Linux 3.10)
max_online_cpus feature
Some more RAM reclaimed from loggers
Removed loads of modules (everything except for the wifi module is now built into the kernel)
As you can see, HodorKernel is a fast, very secure, up-to-date, optimized and intelligent kernel. It also offers full MultiROM support.
DOWNLOAD
HubDroid
SOURCE
GitHub (branch 10.5.A.0.283)​
CREDITs
I'd like to thank everyone mentioned in the commit history and/or the list of contributors (more than 2,836).
XDA:DevDB Information
HodorKernel for Sony Xperia Z, Kernel for the Sony Xperia Z
Contributors
Olivier
Source Code: https://github.com/olivieer/android_kernel_sony_apq8064/tree/10.5.A.0.283
Kernel Special Features: Kexec-hardboot, two-stage boot, MultiROM TWRP 2.8.1, AutoSMP, native exFAT support
Version Information
Status: Abandoned
Created 2014-09-02
Last Updated 2015-07-15

Reserved
CHANGELOG
Code:
[U][B]14/04/2015:[/B] [/U]
[list][*]Added msm-sleeper by flar2 - this allows setting the maximal CPU frequency while the screen is off
[*]Added kcal (thanks to Tommy-Geenexus, faux123 and franciscofranco)
[*]Added GPU OC to 487.5 (use at your own risk!)
[*]Killed some logspam
[/list]
[U][B]22/03/2015:[/B] [/U]
[list][*]More security fixes; patched CVE-2015-1420, CVE-2014-8173, CVE-2014-7970
[*]Removed loads of modules (everything except for the wifi module is now built into the kernel)
[*]Added 162 MHz and 270 MHz CPU clocks
[*]Compiled with @Christopher83's latest Linaro GCC 4.9.3-2015.03 Toolchain and O3
[*]Enabled graphite
[/list]
[U][B]19/02/2015:[/B] [/U]
[list][*]Loads of security fixes; patched CVE-2014-9529, CVE-2014-9683, CVE-2014-8160 and CVE-2015-1465.
[*]Killed some logspam
[*]Built some modules into the kernel
[*]Added and enabled the [URL="https://github.com/olivieer/android_kernel_sony_apq8064/commit/4588335e51d3bd332f975ffe200a2c7d7e0a617c"]suspend backoff driver[/URL]
[/list]
[U][B]27/11/2014:[/B] [/U]
[LIST]
[*]Merge of Sony 10.5.1.A.0.292 release (ramdisk only!)
[*]Updated MultiROM TWRP
[*]Tweaked writeback
[*]Fixed memory leak in cfg80211
[*]Decreased Swappiness
[*]Enabled Krait Retention
[*]Network speed tweak for TCP
[/LIST]
[U][B]04/11/2014:[/B] [/U][LIST]
[*]Fixed exFAT
[*]Implemented Faux Sound Control
[*]Synced prima wlan with kk_2.7_rb1.43 (521992a1)
[*]Switched to LZ4 compression
[/LIST]
[U][B]02/11/2014:[/B] [/U]
[LIST]
[*]Added new bootsplash/logo thanks to awesome @edisile!
[*]Merge of kk_2.7_rb1.43 (CAF upstream)
[*]Switched to MultiROM TWRP 2.8.1
[*]Switched to AutoSMP
[*]Implemented sysfs for vibrator level
[*]Added overall stats for all available cores
[/LIST]
[U][B]27/09/2014:[/B] [/U]
[LIST]
[*]Merge of 10.5.A.0.283
[*]Updated TWRP to 2.8.0.0
[*]Added (forced) fastcharge support
[/LIST]
[U][B]02/09/2014: [/B][/U]
[LIST]
[*]Initial public release
[/LIST]

Test thanks wao very fast...oliver overclok 1700 battery is good?
---------- Post added at 12:47 AM ---------- Previous post was at 12:22 AM ----------
Oliver twrp is 2.6.0.3??

Is This compatible with stock kit kat roms likes Criskelo's one?
Inviato da mio nonno col telegrafo

Yes 10.5.A.0.xxx rom...i have problem twrp 2.6.0. No 2.7.1.0...

xNAPx said:
Is This compatible with stock kit kat roms likes Criskelo's one?
Inviato da mio nonno col telegrafo
Click to expand...
Click to collapse
comax70 said:
Yes 10.5.A.0.xxx rom...i have problem twrp 2.6.0. No 2.7.1.0...
Click to expand...
Click to collapse
Guys. I have decided to keep the OP as short as possible this time, why don't just read it?

I read the post ... like I'm the old recovery version.. Whay the post says TWRP 2.7.0.1 excuse are ignorant ...[emoji12]

ill have too TWRP 2.6.3.0 not latest after flash kernel

Feature Request
Hi, would you please add doubletap2wake? I think I would like to try your kernel for multirom but I need that feature as I already got used to waking up my device like that on xzkernel. Thank you.

Kelvin98 said:
Hi, would you please add doubletap2wake? I think I would like to try your kernel for multirom but I need that feature as I already got used to waking up my device like that on xzkernel. Thank you.
Click to expand...
Click to collapse
Please not! DT2W causes so many problems, even if it`s turned off!

BeDesireS said:
Please not! DT2W causes so many problems, even if it`s turned off!
Click to expand...
Click to collapse
But it works extremely well on Xzkernel v26 and yes there was indeed some issues like, the phone will wake up itself when in pocket but it all works fine now on v26. No one is complaining about that anymore...

Kelvin98 said:
But it works extremely well on Xzkernel v26 and yes there was indeed some issues like, the phone will wake up itself when in pocket but it all works fine now on v26. No one is complaining about that anymore...
Click to expand...
Click to collapse
I had still huge probs with V26 and reverted back to stock kernel therefore!
I think the best solution would be a version with and one without dt2w,
but that`s not our decision!

so far this kernel so cool and stable

There is a bug: when you change GPU frequency in TricksterMOD it's reverting to 400 MHz

Kernel works like a charm and battery life is great!
Many thanks for this!
Gesendet von meinem C6603 mit Tapatalk

coming from XZKernel but WiFi dont work here, i cant switch it on its permanently off !
Switch ON is without a function !

dubist said:
coming from XZKernel but WiFi dont work here, i cant switch it on its permanently off !
Switch ON is without a function !
Click to expand...
Click to collapse
Same here, I reverted on Xz v26
Inviato da mio nonno col telegrafo

xNAPx said:
Same here, I reverted on Xz v26
Inviato da mio nonno col telegrafo
Click to expand...
Click to collapse
Did you uninstall xz kernel via aroma first?
It might be the WiFi drivers that come with xz kernel and you must uninstall the kernel via aroma installer first to get a clean base for the new kernel.
Gesendet von meinem C6603 mit Tapatalk

Ok thank you
Edit: so i uninstalled the xz kernel but now after rebooting I lost the recovery, how can i do now?
Inviato da mio nonno col telegrafo

Will test it tomorrow!
Also, please do not include double tap to wake, really, it is the only rason than I revert to stock from XZKernel, it works for people than keeps their phone on the table, but for many others than have to use it in the pocket is a pawnfull feature. :/

Related

[MM-KERNEL][UC][F2FS] Project T for MM [STOCK ROM ONLY]

Hello again,
This is my work on the stock Marshmallow Kernel for Zenfone 2, based on the officially released ZF2 kernel source code.
Please note that I do my testing on a ZE551ML 4GB 2,3GHz
Note: This kernel works ONLY on stock based versions!​
Features:
Based on Zenfone 2 V4.21.40.184 kernel source (completely from scratch)
Built with gcc4.9 toolchain
UC to 333MHz
Touchboost input event handler
Added the following CPU governors:
- Lionheart
- Bioshock
- Yankactive
- TheSSJactive (Yankactive with hotplugging)
Added IO schedulers:
- sio
- zen
- vr
- fifo
- sioplus (credits to @boype, fixed afterwards for zf2 by me)
- fiops
- working ROW scheduler!!!
- deadline
Added TCP congestion algorithms:
-BIC
-CUBIC
-WESTWOOD
-HSTCP
-HYBLA
-HTCP
-VEGAS
-VENO
-SCALABLE
-LP
-YEAH
-ILLINOIS
Approx. 30% faster due to CRC disabling and auditing
Power efficient Work queues
Powersuspend
Dynamic FSync
Set minimum brightness to 2 instead of 15 percent (changeable via kernel adiutor, please set it to 1 there, otherwise your screen is pretty much black)
exfat support (no fuse, all credits to @Dorimanx, automounting of devices fixed by @sorg)
Sweep2Sleep (all credits to Lord Boeffla)
frandom RNG
F2FS support
ZRAM
WLAN Wakelock reducer
More to come:
Init.d
If I should find the time also:
BLX
A separate KVM build
Compiling with another Toolchain
How to install:
1st pre-requisite: Unlock your Bootloader
2nd pre-requisite: Use the stock Marshmallow ROM ;-)
3rd pre-requisite: BACKUP!!!
Download the flashable anykernel zip here:
Drive
Flash it via TWRP and reboot. The Anykernel zip preserves whatever modification you already have (xposed, root,...) and just replaces the needed parts :good:
Credits:
@jrior001, @crpalmer, @jamison904, @tectas, @dorimanx, @Lord Boeflla, @say99​
XDA:DevDB Information
[MM-KERNEL][UC][F2FS] Project T for MM [STOCK ROM ONLY], Kernel for the Asus ZenFone 2
Contributors
TheSSJ
Source Code: https://github.com/TheSSJ/zf2_mmkernel
Kernel Special Features: F2FS, more governors, underclocked, more IO schedulers, westwood TCP cong
Version Information
Status: Stable
Current Stable Version: 1.5
Stable Release Date: 2016-11-25
Created 2016-09-09
Last Updated 2016-12-08
Reserved
Changelog:
25-11-2016 v1.5
- Updated to latest kernel version from Asus Website (.184)
23-09-2016 v1.4
- backlight is configurable again (super simple patch)
- Mechanism to avoid entropy depleting (aka generating random numbers as needed)
20-09-2016 v1.3
- set brightness to the minimum possible before the screen goes off
- restrict user space apps to modify the min_brightness node, Kernel adiutor cannot mess around anymore with it
- increase speed of mathematical operations
18-09-2016 v1.2
- Fixed deep sleep issue and camera problems
18-09-2016 v1.0 & 1.1
- Implemented WLAN wakelock divider (configurable in KA)
- Enabled Deadline IO scheduler
- Increased performance by approx. 30% (according to the rumors)
- GPU: Set default frequency to 266MHz
- Should automount cache and data depending if ext4 or f2fs
17-09-2016 v0.6
- Enabled video driver of z008, should work now
- Built-in wireless driver instead of a module
- Fixed urgent request handling in row scheduler
- set ROW as default IO sched
Older releases:
16-09-2016 v0.5
- Failed build while trying to reduce modules to 0
13-09-2016 v0.4
- Updated to latest ASUS source code (V4.21.40.134)
- Added configurable LED blink rate (check Kernel Adiutor! Thanks to @crpalmer for the implementation and @say99 for pulling this to the source)
- Dynamic FSync turned on by default
- Updated Powersuspend driver to 1.7
- Increased readahead for memory handling (this has nothing to do with reading from int./ext. storage)
- Updated Block-system to support urgent request handling (pre-requisite to get the ROW scheduler working)
- Added working row IO scheduler
12-09-2016 v0.3
- power efficient work queues
- added quick wakeup driver (improves deep sleep)
- under the hood Improvements
11-09-2016 v0.2
- added powersuspend driver
- added dynamic fsync
- working Anykernel zip system!
09-09-2016 v0.1
Initial build flashable with Anykernel system
- UC
- More governors
- More IOSchedulers
- F2FS
- exFAT support
- Sweep2Sleep
- Touchboost working for Thessjactive and Yankactive
Reserved
Any bugs? Tell me about your current phone setup and describe the problem!
Project T, reborn! It's incredible to see this project alive agan!
@TheSSJ, about F2FS: it supports mixed setups (F2FS /data and ext4 /system and /cache) or only F2FS-all setups?
I love you
---------- Post added at 10:50 AM ---------- Previous post was at 09:59 AM ----------
@TheSSJ
For some reason, after flashing, the kernel does not install.
I reboot to twrp, dirty flash WW134 ROM, flash supersu, flash xposed, flash twrp and flash this kernel. Wipe cache and d.cache.
Reboot and it stock kernel.
I tried 2nd time. Flash kernel in twrp and it still stock kernel.
@TheSSJ
My friend @TheSSJ
Thanks for your kernel.....
I flashed it , but when i reboot, my kernel is stock... Flash again and same stock kernel.
Regards!!
Carlos6862 said:
My friend @TheSSJ
Thanks for your kernel.....
I flashed it , but when i reboot, my kernel is stock... Flash again and same stock kernel.
Regards!!
Click to expand...
Click to collapse
Same issue here
Good job:good:
Z008 support???
Carlos6862 said:
My friend @TheSSJ
Thanks for your kernel.....
I flashed it , but when i reboot, my kernel is stock... Flash again and same stock kernel.
Regards!!
Click to expand...
Click to collapse
same here. I was on borets kernel, and it keeps.
Thats bad..will look into it later to see what went wrong...thx for the feedback
wow great
Cool it everyone, I think it's just a misunderstanding
I have uploaded a flashable zip for now as Anykernel doesn't work as I want it to work ^^
At the moment this can be only flashed by people
WITH root and
WITHOUT xposed
After flashing the kernel, then you can re-flash xposed, this should work then
TheSSJ said:
Cool it everyone, I think it's just a misunderstanding
I have uploaded a flashable zip for now as Anykernel doesn't work as I want it to work ^^
At the moment this can be only flashed by people
WITH root and
WITHOUT xposed
After flashing the kernel, then you can re-flash xposed, this should work then
Click to expand...
Click to collapse
Thanks! downloading...
EDIT:
After flashing the kernel the system became unbootable. It boots into recovery after "reboot system".
Dan_Jacques said:
Thanks! downloading...
EDIT:
After flashing the kernel the system became unbootable. It boots into recovery after "reboot system".
Click to expand...
Click to collapse
Okay, did you have xposed installed? Could you please try to remove xposed and just flash the kernel without it? This Anykernel thing seems to be the only available option...
TheSSJ said:
Okay, did you have xposed installed? Could you please try to remove xposed and just flash the kernel without it? This Anykernel thing seems to be the only available option...
Click to expand...
Click to collapse
My friend @TheSSJ
my phone boot up with your great kernel......First, I did a wipe cache and dalvik and then flash your kernel. Thanks again!!
Regards!!!
Carlos6862 said:
My friend @TheSSJ
my phone boot up with your great kernel......First, I did a wipe cache and dalvik and then flash your kernel. Thanks again!!
Regards!!!
Click to expand...
Click to collapse
Hello. Do you have xposed?
Thanks in advance.
---------- Post added at 08:07 AM ---------- Previous post was at 08:06 AM ----------
TheSSJ said:
Cool it everyone, I think it's just a misunderstanding
I have uploaded a flashable zip for now as Anykernel doesn't work as I want it to work ^^
At the moment this can be only flashed by people
WITH root and
WITHOUT xposed
After flashing the kernel, then you can re-flash xposed, this should work then
Click to expand...
Click to collapse
Ok cool down.
Thanks master. Let me try.
Tiongkia said:
Hello. Do you have xposed?
Thanks in advance.
---------- Post added at 08:07 AM ---------- Previous post was at 08:06 AM ----------
Ok cool down.
Thanks master. Let me try.
Click to expand...
Click to collapse
No my friend @Tiongkia! Without xposed.
I lost it, when flash the kernel.
Regards!! ? ?
Carlos6862 said:
No my friend @Tiongkia! Without xposed.
I lost it, when flash the kernel.
Regards!! �� ��
Click to expand...
Click to collapse
Yes, i tired. Same results. Xposed don't work.
Thanks buddy
TheSSJ said:
Okay, did you have xposed installed? Could you please try to remove xposed and just flash the kernel without it? This Anykernel thing seems to be the only available option...
Click to expand...
Click to collapse
do we have a plan to break xposed?? [emoji14]
anyways I will try looking into any kernel, since I really prefer it over doing mess with ramdisk [emoji14]
Sent from my ASUS_Z00A using Tapatalk
say99 said:
do we have a plan to break xposed?? [emoji14]
anyways I will try looking into any kernel, since I really prefer it over doing mess with ramdisk [emoji14]
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Maybe I'm being paid to break xposed
I just need to take the time to see where the script goes wrong (by the way,I took your anykernel as base :laugh: )
Will test it line by line on my linux machine today :good:

[KERNEL][G925FD/I][MM] N0G33K Kernel V4.0 - FEB 2017

Welcome to the N0G33K edition Kernel ​
This kernel is built on the idea of having optimized battery life and performance. A well made balance between these two is what you get.
Read this first
Please do not post requests, because this is my personal kernel and I won't add any stuff I do not want myself (i.e D2W, S2W, AOD, sound control etc). Also I won't add any other support for other devices. Last but not least: I don't reply to questions like: "which governor/scheduler is the best" etc. The choice is all yours.
PS: You need to root yourself (Magisk or SuperSU)
Features
Based on the latest G920FXXU5DPL4 kernel source
Added Linux 3.10.105
Tons of Governors and schedulers added
Compiled with Sabermod 7.0 GCC
Deep sleep and Google Play Services Fix
Enabled Permissive mode
Disabled Knox
Synapse Control
Entropy optimization
Scheduler Improvements
Binder Improvements
Idle Improvements
Other misc optimizations
Download:
V4 https://mega.nz/#!I05xUDLD!7T86PGq2VtTc15VrfFoXhhKth3FIpI4O0gxpTA8vd2s
Changelog:
V1
- Reworked whole kernel
- Optimized battery and performance
V1.1
- Reverted some stuff to test 3
- Fixed Fading LED
V1.5
- Tweaked LMK
- Optimized Workqueue
- Added battery efficiency patches
- AES put to x4 for more speed
- Readahead tweaked
- Vnswap to fast device
- HMP adjusted for more smoothness / battery efficiency
V1.8
- Reverted LMK and Workqueue edits.
- Enabled powereffici�nt Workqueue
- Tweaked Interactive governor
- Added Powersuspend
- Added more Binder changes for UI smoothness
- HMP and Cpuidle improvements.
- LZ4 Compressed
1.9
- Went back to UBERTC 5.3 because N0G33K V1.8 had kernel panics.
- Removed wlan wakelock control and reduced it myself.
- Some other edits and reverts
V2.0
- Reverted ALOT of changes I made in previous versions.
- Updated Kernel source to the latest DPJ2 source
- Compiled with Sabermod 7.0 Toolchain with CCache (should be stable now)
- Updated Linux to 3.10.104
- Backport latest Linux 4.8 random driver (= like super Seeder)
- Backport latest crypto algorithm Chacha20
- Added new battery efficiency patches
- Tweaked interactive governor for better performance/battery.
- Added new governors: Yankactive, Smartmax and Smartmax_eps
- Updated BFQ I/O
- Added dual sim support
- Fixed Invisible CPUset (should actually work now)
- Screen on hotplug disabled (Dynamic hotplug wasnt good enough)
- Added wakelock controls again.
- Updated Synapse
- Patched "Dirty Cow" (CVE-2016-5195) exploit
- Zswap improvements
- Disabled big cores on screen off
- Improved CPUIdle
- Powersuspend hooks added
- and more
V3
Reworked the whole kernel:
- Based on U5DPL4 source
- Powersuspend is out, State Notifier is in.
- Replaced Linux 4.8 random driver with Frandom
- Interactive governor: merged Galaxy S7 Interactive changes (android N changes wont boot, so kept it MM)
- Merged S7 zswap/zpool and zsmalloc android N changes
- Added Impulse governor
- Tweaked I/O Schedulers for our SSD + Zen V2 update
- Xbox control support added and updated to latest upstream (can be enabled in Synapse)
- Noatime as default for better performance
- SafetyNet patched (soon there probably will be a workaround for it...so enjoy as long it lasts)
- More wakelocks toggles added
- Sync on suspend disabled
- Improved Idle drain
- Android OS drain should be better now.
- Removed some other stuff that caused yank like invisible cpusets
V4
- Updated Linux kernel to 3.10.105
- Updated Safetynet patch
- Binder updated to latest Linux 4.6 (smoother UI)
- Backported Linux 4.1.38 random driver and removed Frandom
- DVFS decision mode in Synapse added
- DVFS: scale to 1k instead of 1.2k GHz
- Backported latest CPUidle driver from Linux 4.7 (should give better idle experience throughout the day)
- Other misc optimizations
Credits:
- The Sickness - For his guidance and support
- CODEG33K - He knows why
- Aria.A97 - Intensive daily testing
- Everyone else I cherry-picked from.
Source Code: https://github.com/Noxxxious/Zero
Want to use this in your rom?: PM me first. Disclaimer: I am not responsible for all the damages followed by or to your phone after flashing this kernel. If it bricks, wipes, explodes and you will hold me responsible I will only laugh
XDA:DevDB Information
N0G33K Kernel, Kernel for the Samsung Galaxy S6 Edge
Contributors
Quintz
Source Code: https://github.com/Noxxxious/Zero
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V4
Stable Release Date: February 2017
Created 2016-11-13
Last Updated 2017-02-22
Known issues:
- Probably Synapse "backup profile" doesnt work.
F.A.Q. - Frequently Asked Questions
Q: Synapse says no UCI detected
A: Install Busybox to system/xbin
Q: I had a reboot
A: Only report it here if you didn't undervolt and do it with a log.
A2: If you had random reboot without undervolting, then make a proper log please. Which means I need a last_kmsg from right after the reboot.
You create the log by using this command in adb shell or a terminal or use any 3rd party app like Syslog.
Code:
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
Does this one work for G925F and will it be rooted?
I wish ppl would support w8. I'd be willing to donate for a good kernel
Will this work on the 925T
Link not work
+1
franci79 said:
Link not work
Click to expand...
Click to collapse
Sent from my SM-N930F using XDA-Developers mobile app
hadkeren said:
+1
Sent from my SM-N930F using XDA-Developers mobile app
Click to expand...
Click to collapse
franci79 said:
Link not work
Click to expand...
Click to collapse
Works fine
Testing now [emoji2]
The kernel is absolutely brilliant. I have approx 2 hours youtube and lost only 22 percent of battery 🔋
Gesendet von meinem SM-G925F mit Tapatalk
mydonose said:
The kernel is absolutely brilliant. I have approx 2 hours youtube and lost only 22 percent of battery 🔋
Gesendet von meinem SM-G925F mit Tapatalk
Click to expand...
Click to collapse
Stock settings ?
Love this kernel......great work
thank you for sharing your great kernel on the S6 community. Really loving your kernel for my S6 Edge. Running smooth. Keep it going great Kernel developer.
Inverted Sceen
I just flashed the kernel with flashify apk and after the reboot all the icons works in the opposite way. If I push the icon on the left side open the apk of the right side. It happens the same with the TWRP recovery. I tried to recover with the copy before the flash and nothing resolves. I have reinstalled the rom totally clean and nothing changes. G920F
Could you help me?
edzamber said:
Stock settings ?
Click to expand...
Click to collapse
Yes, nothing changed
Gesendet von meinem SM-G925F mit Tapatalk
kurdiakis said:
I just flashed the kernel with flashify apk and after the reboot all the icons works in the opposite way. If I push the icon on the left side open the apk of the right side. It happens the same with the TWRP recovery. I tried to recover with the copy before the flash and nothing resolves. I have reinstalled the rom totally clean and nothing changes. G920F
Could you help me?
Click to expand...
Click to collapse
U installed kernel for 925f on 920f thats why. There is a way to fix it search....... and use this next time.
http://forum.xda-developers.com/gal...ernel-el-generalissimo-v3-01-10-2016-t3472477
Does anyone know how I can use N0G33K with Magisk hide module? Arter Kernel works for me with Magisk and Im able to use Pokemon go. But with N0G33K Kernel I cant play anymore. Any help? Im using a S6 Edge 925F.
will this work on tmobile s6 edge ith alexis rom ?
lilmikey201 said:
will this work on tmobile s6 edge ith alexis rom ?
Click to expand...
Click to collapse
There is thread for t-mobile users as well, but not this kernel......
Harregukalerik said:
There is thread for t-mobile users as well, but not this kernel......
Click to expand...
Click to collapse
So then the answer is no......
Sent from my SM-G925T using Tapatalk

[Kernel] BeastMode Kernel vR105 LineageOS (A2017U)

No fancy descriptions here. It's a kernel, it's for the axon 7 (US), and it works.
Features (from what I can remember)
KCAL display driver
Added fiops, zen, row, and sio IO schedulers
Enabled westwood, htcp, hstcp, hybla, vegas, scalable, lp, veno, illinois, and dctcp tcp congestion algorithms
Slight overclock to LITTLE cluster (1.72GHz) and big cluster (2.26ghz)
GPU overclock (652MHz)
Performance tweaks
Tweaked out ramdisk
F2FS support
init.d support
Adrenoboost
Touch input boost
Wake lock controls for various things >_>
Fsync on/off support
exFAT (nofuse) support
Enabled core ctl in kernel hotplugging
Enabled qhmp scheduler
enabled HMP cstate aware (is aware of core c-states and tries to schedule tasks on already awake cpus)
Added cleancache and frontswap
Disabled arm "CoreSight"
Enabled zram lz4 compression
Disabled dm_verity kernel wide.
Disabled input debugging driver
Disabled msm remote debugging support
Enabled in-kernel block test/test io scheduler
Disabled ZTE "VLog" and "sdlog"
Disabled cache and m4m error reporting
Disabled panic on correctable cache/m4m errors
Disabled compiling with frame pointers for debugging
much more..
Thanks:
flar2
jcadduono
imoseyon
faux123
dorimanx
savoca
all of team win
all of xda-developers staff
all of xda-developers community (for those i've missed)
of course ZTE for this fantastic device
Google for awesome af Android
________________________________________________________________________________________________
[size=+3]LineageOS[/size]
Download (Enforcing version): BeastMode vR88 for the ZTE Axon 7 (A2017U) now with war_mod
Download (Permisive version): BeastMode vR105 for the ZTE Axon 7 (A2017U) now with war_mod
XDA:DevDB Information
BeastMode Kernel for the Axon 7 (a2017u), Kernel for the ZTE Axon 7
Contributors
freeza, freeza, warBeard_actual
Source Code: http://www.freeza-inc.com/kernelsources/A2017U/N/Stock/Kernel.tar.gz
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: vR105
Stable Release Date: 2017-12-19
Created 2016-12-23
Last Updated 2017-12-20
Changelog
12/19/17-vR105:
Updated almost everything to B32 source
Updated war_mod
Added warmode sysfs entry (/sys/kernel/warmod/warmode) with 0 (disabled) as default. configurable in init.d script
Added android security patches from August-December via the Android Security Bulletin
Ramdisk updated with latest LineageOS version
11/18/17-vR88:
Reborn based on B32/B25 hybrid
Full changelog later
4/18/17-vR45:
Fixes
Resurrection Remix support
4/17/17-vR44:
Disabled overclocking. Didn't provide much benefit and our SoC kind of sucks for OC stability (lower binned probably.)
Tweaks
4/15/17-vR43:
Made little cores behave by forcing them to 1.5GHz by default.
Disabled cstate awareness
4/12/17-vR42:
Removed a bunch of modules and compiled some drivers into kernel
LineageOS support
4/9/17-vR40:
Disabled some debug options in defconfig
Enabled qhmp
F2FS support
4/3/17-vR34:
Core Control is disabled by default (can be re-enabled from /sys/devices/system/cpu/cpu0/core_ctl/disable)
Added a few more wakelock controls (/sys/module/wakeup/parameters/)
3/22/17-vR31:
Added a few more wakelock controls (Thanks @flar2)
Misc fixes
3/21/17-vR30:
Updated to B19 source from ZTE.
3/19/17-vR29:
Fixed NFC until ZTE's B19 source. (Thanks @jimbo77)
3/17/17-vR28:
Updated source a little
Fixed Magisk/NoSuperSU quirks with sim.
3/12/17-vR27:
-Fixed the damn WiFi
-Added magisk compatible NO SuperSU version
2/24/17-vR26:
-Fixed WiFi on permissive
-Updated wlan driver
-Added Zen IO scheduler
2/21/17-vR24:
-Fixed ADB/MTP. ADB shell should launch as root, at least on the permissive version.
-Disabled a bunch of debugging overhead
2/19/17-vR23 (Enforcing only):
-Fixed WiFi
2/17/17-vR22:
-Updated for B15 (7.0/Nougat)
1/30/17-vR15: performance tweaks
-ZTE Nougat F2FS driver
[email protected] f2fs patches
-ZTE Nougat WiFi driver
12/28/16-vR12: attempt #2 at fixing video recording/playback
-more defconfig tweaks
-included B27 library files for mediaplayerservice, camera metadata, cameraservice, and arcsoft night mode.
-that safetynet patch for unlocked bootloader.
12/28/16-vR09: fixed video playback.
-switched wlan driver to CM13 version(R.I.P)
-tweaks to defconfig
12/23/16-vR07: initial release
Lmao
Sent from my Nexus 6P using Tapatalk
Nice
Running on the latest B29, all cool. This device is a behemoth overclocked! Thanks!
Do we have the stock kernel. Just in case we want to rollback?
borijess said:
Do we have the stock kernel. Just in case we want to rollback?
Click to expand...
Click to collapse
Backup the boot partition with TWRP then you can restore it if you want to roll back.
Hey
(i know its for the A2017U)
i am on A2017G , it boots but no audio, maybe i could port your source to A2017G. but the sourcecode link want work.
Thx For your Work.....
VeNuMuS said:
Lmao
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Why??
Thanks for this! Been waiting for a better kernel.
Questions:
- Does it make double-tap-to-wake faster?
- Does it solve the delayed notifications problem?
- Will it bring about world peace?
dank
Bad and Boujee. Nice.
Other than selecting the max overclock values, do you have any recommended kernel settings to get the best from the phone & kernel? Thanks
I'm going to guess it doesn't work with cm13?
It'd be pretty cool if it did, but I wouldn't be surprised if it didn't.
Im on A2017G and for me Sound work.But Gpu not OC for me it show 624 MHz not 652MHz.Can we change it via Kernel Auditor??
whats the best saturation number in KCAL? also when its flashed does it OC or its left stock speed?
gecko702 said:
whats the best saturation number in KCAL? also when its flashed does it OC or its left stock speed?
Click to expand...
Click to collapse
It's left at its stock values. You'll need to specify the overclock, the step is enabled but not selected by default. I use Kernel Auditor with SuperSU and BusyBox to modify the settings, and so far it's worked just fine.
TheLastSidekick said:
It's left at its stock values. You'll need to specify the overclock, the step is enabled but not selected by default. I use Kernel Auditor with SuperSU and BusyBox to modify the settings, and so far it's worked just fine.
Click to expand...
Click to collapse
What's the safest OC speed without sacrificing too much battery or phone.
---------- Post added at 01:16 PM ---------- Previous post was at 01:14 PM ----------
Is it just me or is the camera faster at taking pics on this kernel?
Is it working on cm13 and can you make a Version without overclocking?
How about undervolt? Can i use an app for this?
dbekan%5 said:
Is it working on cm13 and can you make a Version without overclocking?
How about undervolt? Can i use an app for this?
Click to expand...
Click to collapse
Why would you need a version without overclocking when overclocking isn't enabled by default?

[KERNEL] [LOS 14.1][EAS] Nagatobimaru [26 September]-EOL

DISCLAIMER
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know how to bring your dead device back to life please don't make any modifications and stay with stock MIUI. This is only meant for advanced users.
Features :
-Compiled with UBER 6.4.1 TC-
-CPU/GPU O.C-
-Voltage Control-
-Savoca KCAL-
-schedutil Cpu Gov-
-FIOPS I/O-
-Chacha20 CRNG-
-Adreno Idler-
-Sound Contol-
-Slimbus O.C for better sound quality-
-Vibration Control Intensity-
-ExFat/NTFS Support-
-Toggleable Software CRC-
-TCP congestion Algorithms-
-Misc Changes-
-Spectrum support-
Installation:
-Boot Into Recovery-
-Flash Kernel-
-Flash EAS Patch-
-Wipe Cache and Dalvik (Optional)-
-Reboot!-
all EAS users should use this EAS Supported ROM , i won't accept any bug report on any other rom.
Download :
https://www.mediafire.com/folder/2eahxx74oq3wv/Nagatobimaru
--------------------------------------------------------------------------------------------------------------------------------------
Credits:
@eng.stk @flar2 @ak @franciscofranco @The Flash @frap129 @osm0sis
--------------------------------------------------------------------------------------------------------------------------------------
Contributors:
MEGAX91
Changelog :
v1.6 :
-updated Wlan Driver
-updated sound control
-updated thermal driver
-updated cpuidle driver
-updated F2FS driver
-memory management improvements
-upstream updates
-bug fixes
v1.5 :
-Merge Last CAF branch LA.UM.5.5.r1-05800-8x96.0
-Updated Wlan Driver
-added Tripndroid I/O Scheduler
-added cpu-boost (optimized for EAS)
-removed CPU OC
-removed voltage control
-removed qpnp-fg family wakeup sources
-Blocked lot of kernel wakelocks
-updated EXT4 driver
-lot of upstream changes
-Bug Fixes
v1.4 :
-Bluetooth: Properly check L2CAP config option output buffer length (CVE-2017-1000251 / BlueBorne fix)
-added Binder changes from O
-Increased max readahead
-removed FP wakelocks ( on kernel side ) like : qbt_wake_source / captouch_ttw_wl
-added 710MHz GPU OC
-reduced memory latency
-Fixed Bluetooth issues
-Fixed overflows on wlan driver
-Fixed issues on Thermal driver
-Bug Fix
v1.3.1:
-Bug Fix
v1.3:
-added SafetyNet Fix
-I/O latency improvement
-hwmon fixes
-Updated F2FS
-Fixed direct references to HZ
-Updated PM/devfreq
-Bug Fixes
v1.2:
-Updated binder
-Updated cfq I/O
-Bug fix
v1.1:
-Fixed Sound issue.
-added Flar2 sound Control
-Bug Fix
v1.0 :
initial release
don't dirty Flash my kernel on any other custom kernel , if you are coming from another custom kernel , first flash your Rom's stock kernel through Fastboot , then Flash my kernel.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
never post problems without full details of what setup you are using, it's not possible to help that way.
Provide me some logs:
- ADB logcat dump
- /sys/fs/pstore contents
- dmesg dump
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
if you think your battery life is not good enough , use betterbatterystats and find the battery drain causes..
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
if you use CPU O.C steps and your device experiencing random reboot while its on standby mode , it means your CPU can't take it. The 821 Lite is a maxed out 820 , No more room for CPU OC.
Dev. Can you make kernel for miui 9? Of course if you want and have time?
kael2404 said:
Dev. Can you make kernel for miui 9? Of course if you want and have time?
Click to expand...
Click to collapse
will make a MiUi build as soon as i find some free time.
Does it work with Nougat bootloader?
jigs4wkiller said:
Does it work with Nougat bootloader?
Click to expand...
Click to collapse
yes.
what's the difference between this and guyver kernel?
skyline91 said:
what's the difference between this and guyver kernel?
Click to expand...
Click to collapse
Guyver is HMP
Nagatobimaru is EAS
Have some problem with earphone: sound distortions.
On it kernel, on Guyver kernel. AICP-rom, firmware 7.8.22
How to fix? What logs needed?
It default oc to 2.3 GHz?
---------- Post added at 09:35 AM ---------- Previous post was at 08:59 AM ----------
I've got twice reboot when pluging usb to PC.
LikvidatorMax said:
Have some problem with earphone: sound distortions.
On it kernel, on Guyver kernel. AICP-rom, firmware 7.8.22
How to fix? What logs needed?
Click to expand...
Click to collapse
what kind of sound distortion ?
use syslog and take log ( kernel log & Maine log )
357662149 said:
It default oc to 2.3 GHz?
I've got twice reboot when pluging usb to PC.
Click to expand...
Click to collapse
No , kernel don't use OC CPU steps by default.
No such issue here.
send me your /sys/fs/pstore contents after random reboot.
emm..voltage control
zjy2200656 said:
emm..voltage control
Click to expand...
Click to collapse
it does have voltage control ! use Kernel Adiutor
MEGAX91 said:
what kind of sound distortion ?
use syslog and take log ( kernel log & Maine log )
.
Click to expand...
Click to collapse
Hard to describe. After play 30 second normal sound. After that 30second some distortion. Distortion like sizzle, like cable tv when it lost signal.
Then return to normal sound.
Hope it will help
https://drive.google.com/open?id=0B-Qc1XzHUKGbSF9pY2pjdkp1NzA
Do this kernel support mm bootloader cause i tried it on aospex f2fs just stuck on mi logo for 5 minutes so i assumed it failed.
its work epic rom 7.7.20 ?(miui8)
mszain said:
Do this kernel support mm bootloader cause i tried it on aospex f2fs just stuck on mi logo for 5 minutes so i assumed it failed.
Click to expand...
Click to collapse
never tried it on MM bootloader , why woluld you use MM bootloader , while kernel is compatible with N bootloader?!
taylan08 said:
its work epic rom 7.7.20 ?(miui8)
Click to expand...
Click to collapse
No!
AFAIK system changes are needed to properly support an EAS enabled kernel and without them you won't see the power saving benefits.
MEGAX91 said:
never tried it on MM bootloader , why woluld you use MM bootloader , while kernel is compatible with N bootloader?!
Click to expand...
Click to collapse
i tried guyver 2.3 and it also stuck in mi logo, well i guess its time to update to n bootloader

[Kernel][PELT][EAS]Nameless Kernel[4.4.213][R31][z2_row]

! This kernel is based on treble tree,so make sure you are on a treble ROM !
【! From R20 , it only support 4.4 compatible ROM since we are having 4.4 kernel !】
! Some profiles from /vendor will be replaced so if you want to fully uninstall this kernel,just dirty flash your current ROM!
If you are coming from other kernels,better to do a dirty flash on your current ROM to avoid any strange problems
#Build for z2 plus but it should work well on pro#
---------Notice-----------
I can say with certain flashing this kernel is safe at all.Kernel will not go on OC freqs if u dont choose OC freqs by using tools like KA(from R12).So in fact u can use this kernel as a non-OC kernel Lol.
But the kernel has a lot of settings that could cause unstable like high OC freqs (2.53/2.46/780/2.0),so its strongly recommend to test the freq you want to use before you set it for daily use.Just lock min and max freq to it and see if theres kernel panic or crashes.If everything is fine,you can choose it for daily use.Or u can try to raise voltage for it and test again.
For every device:
OC 2.26+1.68+624 is stable
For most device:
OC 2.34+1.76+710 is stable
For some device:
OC 2.41+2.0(1.86)+780 is stable
For little device:
OC 2.5+2.0+780 is stable
So if this kernel is good at performance or battery depends on ur settings.Default settings(1.8+1.3+624) prefer battery + smooth.
!!!!!Above all,DONT PLAY PUBG ON OC FREQS IF U DONT HAVE WATER COOLER!!!!!
!!!!!UNDERCLOCK FOR PUBG OR U CAN HARDLY EAT CHICKEN LOL!!!!!
----------------------------
Feature:
-Big cluster OC 2.5GHz
-Little cluster OC 2GHz
-GPU OC 780mHz
-Intellithermal included
-Modified thermal config included
-Sound control added
-A lot of TCP govs
-Ghostpepper from AKT included(Less heat and better performance)
-Sound control added
-Arch power included
-Fsync control added
-A lot of optimization included
-Touch boost can be switch now(disable by default)
-CPU set 2.15+1.59 as default
-Upstream to 3.18.107
-Background tasks can load on both cpu0 and cpu1
I think you neednt do anything about optimization to this kernel because I have already do my best for it XD
Download here:
https://github.com/xzr467706992/Nameless-Kernel-Release(old)
or
https://www.androidfilehost.com/?w=files&flid=267780(new)
Flash it and reply this thread if ur phone dosent explode(just a joke)(It should be SAFE)
Spectrum download:
https://play.google.com/store/apps/details?id=org.frap129.spectrum
https://www.coolapk.com/apk/org.frap129.spectrum
(Chinese)
Source:
https://github.com/xzr467706992/android_kernel_zuk_msm8996
Anykernel repo:
https://github.com/xzr467706992/AnyKernel2
Many thanks to: 
 @mracar (Help me fix audio problem on z2 pro)
@DD3Boh (This kernel is based on his tree)
 @Star_king12 (for awsome works on 4.4 kernel)
 @kenny3fcb (for awsome works on 4.4 kernel)
And thanks everyone works on z2 (pro)
From R20 , it only support 4.4 compatible ROM since we are having 4.4 kernel. So go to flash a ROM with 4.4 kernel build in(Latest arrow,aex,etc.),or you ll get problem with video playback and usb.
The latest 3.18 kernel is R19.
R31
Changelog:
- Rebase on CAF "LA.UM.8.4.1.r1-00300-8x98.0"
- Linux 4.4.213
- Merge latest kernel/common
- Update qcacld wlan drivers to "LA.UM.7.6.r1-06700-89xx.0"
- Update simple lmk to v2.25.0
- Increase ZRAM size to 750MB
- Build kernel with clang 10.0.2
- Rebalance cpuset
- Update Anykernel3 and fix error on Android Q system-as-root
- Add msm_irqbalance binary from marlin
- (z2_plus) Restore to original zui touchscreen drivers, fixing touchscreen randomly fails on some devices
- Cleanup some useless commits
- Fix network signal guru not working
- Fix spectrum profile reset after booting
- Fix performance drain after locking screen for a while on some ROM
- Remove OC as it may influence EAS energy balance
- Improve smoothness under mobile data
- Improve app launching time
- Fix up PELT with backports from kernel/common android-4.14
- Move to PELT load tracking for EAS
- Enable iptable ttl target support
- (z2_plus) Add display panel refreshing rate overclock
* Need lock and and unlock (turn screen off and on) after booting or OC wont work.
- Add cpu undervolt
* uv1=undervolt slightly
uv2=undervolt extremely (mostly unstable)
* uv2 can bring about 15% power cost drop down for Kryo HP @ 2.15Ghz
R30
Changelog:
- 4.4.184
- Merge latest caf tag
- Merge kernel/common
- Merge latest qcacld wlan drivers
- Update Clang to 9.0.5
- Update Anykernel2 to Anykernel3
- Move to simple_lmk
- Drop ZRAM size back to 512MB
- Update cpu_input_boost drivers
- Fix some more memleaks
- Support disable FP in latest lineage
- Include sultan's iommu,qos,mdss,cpuidle and many other optimizations
- Upstream f2fs and rapid gc changes
- Allow background tasks load on cpu1
- Slightly optimize touchscreen performance
- Drop z3fold and move back to zsmalloc
- Move back to stock lz4 modules
R29
Changelog:
- 4.4.178
- Rebase on caf's kernel.lnx.4.4.r37-rel branch with latest kernel/common changes merged in
- Update to latest qcacld wlan drivers
- Clang update to 9.0.2
- Gcc update to 9.0.1
- Add hall switch driver
- Upstream f2fs
- F2fs rapid gc support
- Bump up framebuffer boost value of performance profile to 1GHz
- Upstream anxiety io scheduler
- Cleanup defconfig
- Fix log spam on ROMs with hmp perf stack
- Upstream EAS
- Fix some memleaks
- Limit the rate of CPU clock-rate changes
* You can edit it at /sys/module/qcom_cpufreq/parameters
- Boost cpu when lmk decide to kill tasks
* You can edit it at /sys/module/boost_control/parameters/lmk_boost_ms
R28
Change log:
- Update to latest qcacld wlan drivers
- Merge latest caf tag
- Improve idle drain slightly
- Fix USB tethering really
- Remove unused livedisplay drivers
- Underclock cpu on suspend
* You can edit the frequencies in /sys/module/cpufreq/parameters
* Underclock 307mhz+307mhz on suspend for battery profile and 1.0ghz+0.8ghz for balance profile
- Add shenqi_nv support
- Clang 9.0.1
- Improve fp speed slightly
- Remove init.qcom.sh in ramdisk patches and move changes into init.nameless.sh
- More cpufreq and io schedulers bring in
- Boost cpu when launch apps (You can edit boost time at app_launch_boost_ms)
*Default set 500 for balance and 1500 for performance and gaming.
Btw,I m now sure sound problem on aex is not kernel related.The problem is still there even after dirty flash aex.Now I have moved to los by dd3 and everything works fine.
R27
Change log:
- 4.4.176
- Fix -4℃ in KA
(But the cpu temperature is still not accurate because KA is reading a wrong sensor)
- Improve standby.
- Enable iowait_boost.
- Move to dynamic stune boost(Improve battery slightly)
- Updated thermal config
- Move init.spectrum.sh to /vendor/bin
- Fix broken sound in wechat videoplayback&Tik Tok
- Fix phone's mic when headphoes are plugged in
* Thanks to yaro's source
- Encryption (maibe) fixed(ROM support needed)
- Speaker gain is back
- Applied some upstreams from kernel/common
R26
Change log:
- 4.4.174
- Latest caf tag
- Latest qcacld drivers
- Upstream f2fs
- Update fp drivers with yaro's one
- Add support for spectrum
- Support sultan's boost.And you can control it at /sys/module/boost_control/parameters
- Battery improved a lot (at least for me)(About -12%/h under wifi with performance profile on normal usage)
- Fix broken bt,fp and other sensors on aosip,pe etc.
- Switch to mount factory as vendor.
( If you are on a ROM with vendor mount as vendor,what you need to do is
1. Flash twrp with factory support( https://www.androidfilehost.com/?fid=11410963190603913222 )
2. Flash vendor to factory ( https://androidfilehost.com/?fid=962187416754475514 )
3. Flash nameless and it ll work.
*Dont flash v2f after flashing the kernel,otherwise spectrum wont work and vendor ramdisk wont be updated.
)
*If you are coming from other kernels,better to do a dirty flash on your current ROM to avoid any strange problems
Spectrum profiles:
cpubigmax+cpulittlemax+gpumax+gpumin+schedtune.boost-value+sultan-boot-big+sultan-boost-little
Balance(Default):1.8+1.3+510+180+1+0.5+0.8
Performance:2.15+1.59+624+180+10+0.4+0.6
Battery:1.4+1.0+401+180+1+0+0
Gaming:1.6+1.4+510+315+10+0.8+0.8 (For stable pubg experience)
Spectrum download:
https://play.google.com/store/apps/details?id=org.frap129.spectrum
https://www.coolapk.com/apk/org.frap129.spectrum
(Chinese)
* Reep for hmp build because its dead.Switch to R23.1 or R24 if you love it.(I rebase hmp build on eas ,but R25 seems not booting,so its time to stop maintain it)
R25
Change log:
- 4.4.172
- Build with clang 8.0.7+gcc9
- Latest caf tag merged in
- Lastest qcacld wlan driver included
- f2fs upstreamed
- Add some memleaks fixes
- tcp partly backported from mainline
- cfq partly backported from mainline
- z3fold support
- memlat support
- upstreamed eas
- vdso patches included
- Switch to aosp's lmk
- Switch to yaro's fpc1020 drivers
R24
Change log:
- Rebase on 4.4.169 with latest caf tags
- Remove all unnecessary changes and upstreams
- Performance seems better than last build
- Fix booting on z2 pro
R20.1
Change log:
- Upstream to 4.4.163
- Build with LiuNian clang 8
- See github for more
R20:
Change log:
- Linux version 4.4.162
- Works on 4.4 compatible ROM only (ROMs with 4.4 kernel build in)
R19:
Change log:
-Upstream to 3.18.124
-Latest caf tags merged in
-HZ=300
-Improve stability on high load
-See more on github
R18
Change log:
-Upstream to 3.18.120
-Latest caf tags merged in
-Upstreamed some drivers
-Double click wake up enable by default(Works on P)
-Add support for hugepage but disabled by default
-Add support for ksm but disabled by default
*If your ROM is build with lineage trees in zuk-devs,hugepage will be enabled if your device have 6GB RAM and KSM will be enabled if your device have 3GB RAM.
-You can see gpu go 100mHz when theres no load this time
-Current information update every 5s
-See github for more changes
*If you are on Pie ROM with volte working.Flash R18[Volte] build or you ll lose volte after rebooting.
R17
Change log:
-Upstream to 3.18.115
-Include a safetynet patch (need test)
-Added an interface to adjust cpu max freq after screen off(in interactive gov)
-Interface to turn on/off cpu input boost
-Dynamic fsync included
-Gpu min freq now down to 180mHz
-Wireguard included
-Latest caf tag merged
-Latest qcacld driver merged
-Performance improve
R16
Change log:
-Build with DragonTC
-Performance improve
-Upstream to 3.18.110
-Latest source merged
-Faster boot-up speed(than last build lol)
-Back to use 2.15+1.59 as default
R15
Change log:
-Revert something that can cause unstable
-Undervolt for less heat(May cause panic on some device when benching, use voltage control to raise voltage if u meet that)
-Some upstreams
R14
Change log:
-Upstream to 3.18.108
-A lot of hotplugs included(Not recommend enable it on our kryo but u can have a try)
-Intellithermal removed because seems that it doesnt work.
-Use another sound control driver those problem may fixed
R13:
Change log:
-Merge latest caf tag
-Use more proper freq table
-Use more proper values for Gpu
-Check if supported before flashing
-Use stock voltage for cpu to fix panic on some device when benching
R12
Change log:
-Upstream to 3.18.107
-Now cpus will not boost to OC freqs when device is booting and I lock it to a lower freq so there will less heat when booting but a bit slower than last version.So OC is quite safe now,cpu OC only when u select an OC freq,u can use this kernel as a non-OC kernel now Lol.
-Fix panic when booting on some bad devices.
-Big cluster OC 2.53 GHz now(Really unstable,I can only stay seconds on it with raising voltage to 1.25v (using voltage control).Hope some lucky guys could have a bench on it Lol.
!!!And do not use this freq for daily use!!!)
-Little cluster 1.86GHz added.
-“Performance” gov have got no performance now(because of those things before so lock min freq to max if u want to use something like performance gov)
R11
Change log:
-Undervolt a bit
-Upstream to 3.18.106
-Latest source merged
-USB fast charge added
R10.5
Change log:
-Fix voltage problem cause by a oversight
-Really less heat on this build because a ****ing problem is fixed Lol
R10
Change log:
-Fix audio on z2 pro
-Switch to GCC 7
-Underclock 1.8+1.3 as default
-Voltage control added
-Intellithermal added
-Fsync control added
-Sound control works
R9
Change log:
-Fix boot problem on aex0416 build
#Old tree with /factory mounting as /vendor is not supported now#
R8
Change log:
-Darkness added
-maple added
-New thermal conf added with less heat
-LMK back to stock
Nameless Kernel R7
Change log:
-Fix lagging cause by LMK
-Upstream to 3.18.105
-ElementalX added
-Zen I/O gov added
-A lot of network I/O gov enabled (westwood default)
-Set gpu 624mhz as default
-Raise voltage for little cluster 1996mhz and gpu 780mhz,it should be more stable now.
Nameless Kernel R6.5
-Not really a new build
Change log:
-Fix performance on AEX5.4.
Try this if u feel performance on aex5.4 is a ****
Nameless Kernel R6.1
for z2 pro only
-Sound fixed(A lot of thanks to @mracar)
Nameless Kernel R6
for z2 plus and z2 pro
change log:
-Sound control added
-GPU now OC 780mHz
-GPU minimal frequency up to 214 mHz so it will be more smooth (Like recent UI)
-Added 1689 mHz for little cluster
-Lower voltage for non-OC frequencies for less heat
-Raise voltage for OC frequencies for stable
-Merge latest source for z2 pro from cosmedd's repo so sound problem should be fixed.
lan toolboxs developer?(huaji
江泽民1926 said:
lan toolboxs developer?(huaji
Click to expand...
Click to collapse
Yeah
Holy shi*t! This OC is outstanding!
I will try on Cosmic.
Found perfect in AEX v5.3
Thx!
Enviado desde mi Z2 Pro mediante Tapatalk
bug detected, no sound works on the mobile @xzr467706992
xino22 said:
bug detected, no sound works on the mobile @xzr467706992
Click to expand...
Click to collapse
ROM?
xzr467706992 said:
ROM?
Click to expand...
Click to collapse
AEX 5.3
Enviado desde mi Z2 Pro mediante Tapatalk
AEX5.4, the system has no sound
XDAMz said:
AEX5.4, the system has no sound
Click to expand...
Click to collapse
Screenshot of aex's stock kernel version plz
Hi! Flashed your kernel on latest Cosmic OS (Full Treble) and both mic and speaker don't work.
Log attached
@xzr467706992
xzr467706992 said:
Screenshot of aex's stock kernel version plz
Click to expand...
Click to collapse
3.18.71 Kernel versión
Enviado desde mi Z2 Pro mediante Tapatalk
Flashed the new kernel (R6) over AEX 5.4 and Cosmic OS but still no sound from the speaker....
Also after the phone boots when I try to enter the sound option the config hangs on black screen
xzr467706992 said:
Screenshot of aex's stock kernel version plz
Click to expand...
Click to collapse
Do you think it has an easy solution? thx!
Enviado desde mi Z2 Pro mediante Tapatalk
Permissive SELinux perhaps? Seems like there's historically been an "oh hey here's a new release for Z2 Pro... oh sound doesn't work... okay, set permissive SELinux, now it works... then figure out something with DD3Boh/cosmedd/davidevinavil about how they got it to work with enforcing" cycle every time a new ROM/kernel comes out, if memory serves.
Terminator.J said:
Permissive SELinux perhaps? Seems like there's historically been an "oh hey here's a new release for Z2 Pro... oh sound doesn't work... okay, set permissive SELinux, now it works... then figure out something with DD3Boh/cosmedd/davidevinavil about how they got it to work with enforcing" cycle every time a new ROM/kernel comes out, if memory serves.
Click to expand...
Click to collapse
Here the sound also dont work with SELinux on Permissive....
jhobc said:
Flashed the new kernel (R6) over AEX 5.4 and Cosmic OS but still no sound from the speaker....
Also after the phone boots when I try to enter the sound option the config hangs on black screen
Click to expand...
Click to collapse
Audio problem fixed now
xzr467706992 said:
Audio problem fixed now
Click to expand...
Click to collapse
Thx found!!
Enviado desde mi Z2 Pro mediante Tapatalk
---------- Post added at 03:03 PM ---------- Previous post was at 02:40 PM ----------
xino22 said:
Thx found!!
Enviado desde mi Z2 Pro mediante Tapatalk
Click to expand...
Click to collapse
in this new version it gets very hot the mobile just browsing and little more ....
Enviado desde mi Z2 Pro mediante Tapatalk

Categories

Resources