Related
somewhere on the forum... i saw this picture of a tilt back cover, and the speaker was a circle, not a square, and the camera cover looked really nice, it had a metal cover to prevent scratches.
where can i find this?
you sure you weren't seeing the back of the Touch Polaris/Orbit 2?
we can made a camera friendly back cover ourselves
Hi All,
I am wonder if anyone would like to join my project of making a camera friendly back cover for our Kaiser.
I am a product designer in Hong Kong and also a Kaiser user. I know a local factory that produce aftermarket cases for PDAs, to make a back cover is not a hard job at all. All I would like to know is how many Kaiser would like to have this new back cover.
Elton
I'd be interested but depends on the quality of the cover of course. Also maybe we could use some really good glass on the rear cover over the camera, such as polarized glass with anti UV and flare coating, any optician should be able to make it, but might work out a little expensive for the glass alone.
aksd said:
I'd be interested but depends on the quality of the cover of course. Also maybe we could use some really good glass on the rear cover over the camera, such as polarized glass with anti UV and flare coating, any optician should be able to make it, but might work out a little expensive for the glass alone.
Click to expand...
Click to collapse
you need a photography quality glass for good quality photo. Plus in order to fit in to the original back cover, the glass needed to be really thin, that's another challenge. That's why some people in the forum prefer to take the plastic out.
regarding to the quality, the factory is a very experienced one, a simple back cover is too easy for them. All I worry is the cost and how we can spread them out evenly.
How hard would a "flip" cover be? My previous phone, Sony W810i had no protection for the lens, other than the clear plastic area for the lens. The
K750i had a "flip" cover, which fit the 810i like a glove.
How reasonable would it be, instead of a glass lens, to just produce a cover with a simple flip open or slide cover for the lens? Even with a glass area for the lens, you will still get stains, fingerprints etc.
I'd vote for a rear cover with a slide-open cover over the camera. This would allow the camera to be protected from dust and when open, don't use any additional glass, the pictures would be much sharper!
It would have to be a good design that could withstand repeated open-close cycles.
p51d007 said:
How hard would a "flip" cover be? My previous phone, Sony W810i had no protection for the lens, other than the clear plastic area for the lens. The
K750i had a "flip" cover, which fit the 810i like a glove.
How reasonable would it be, instead of a glass lens, to just produce a cover with a simple flip open or slide cover for the lens? Even with a glass area for the lens, you will still get stains, fingerprints etc.
Click to expand...
Click to collapse
I agree. The lens glass needs some sort of protection.
Nokia's N-95 puts the lens at the hinge where no one puts their finger. The HTC Kaiser/Tilt is in a very bad spot for fingers and setting it down into junk or against a sweaty (i.e. wet) shirt pocket.
Also, you might need some bumps on the back to raise the phone a bit since they managed to put the speaker on the back which is about as effective as ....
The back cover gets a bit hot at times too. Don't know what can be done about that.
firstbuddha said:
you sure you weren't seeing the back of the Touch Polaris/Orbit 2?
Click to expand...
Click to collapse
im sure. i know i saw it, but i dont know if it was edited, but it looked pretty real to me.
it looked almost identical to the kaiser's back, except instead of a square speaker, it was circle, and the camera had something better to protect it.
I meant a cover with a glass lens. Its always nice to have 2x times the protection
mikeeey said:
im sure. i know i saw it, but i dont know if it was edited, but it looked pretty real to me.
it looked almost identical to the kaiser's back, except instead of a square speaker, it was circle, and the camera had something better to protect it.
Click to expand...
Click to collapse
please let us know where you saw that cover. It would be nice if we can just pay for it.
Have you thought of using the invisible shield? this is cut with perfection, prevents scratches and marks on the device, and has a very accurate cut-out around the GPS and Camera recess.
www.shieldzone.com
flashy said:
Have you thought of using the invisible shield? this is cut with perfection, prevents scratches and marks on the device, and has a very accurate cut-out around the GPS and Camera recess.
www.shieldzone.com
Click to expand...
Click to collapse
I am not sure about putting another piece of plastic in front of the camera would be a good idea to improve the quality of the photo.
Anyway, I have contacted the factory about this project, they will let me know the cost in about two days. In the mean time, feel free to throw in new design idea.
this back cover should be great!!, i dont mind even the need os using my fingernails for sliding the protector, the fact is that camera lens will be protected in my pocket!!
You can count me in for the sliding back cover for the camera, that would be perfect!
pepeto2001 said:
this back cover should be great!!, i dont mind even the need os using my fingernails for sliding the protector, the fact is that camera lens will be protected in my pocket!!
Click to expand...
Click to collapse
when did i say cover the camera? i said it's been cut around it.
I doubt you will find better to be honest. Without looking silly. It looks like new all the tiem with my shield on.
pepeto2001 said:
this back cover should be great!!, i dont mind even the need os using my fingernails for sliding the protector, the fact is that camera lens will be protected in my pocket!!
Click to expand...
Click to collapse
no, I don't think finger nail is a good idea. If space is allowed, I hope to make a sliding door that can be opened by finger instead of finger nail.
Anyway, let's wait for the quote from the factory first.
Im interested too!
quotation received, but....
The factory replied with a quote but they made a mistake. The quote is for 1000 pieces of battery cover. I don't think we have that many people who would be interested in it, so I ask for a smaller quantity quote. They will get back to me tomorrow.
stay tune!
helpme said:
The factory replied with a quote but they made a mistake. The quote is for 1000 pieces of battery cover. I don't think we have that many people who would be interested in it, so I ask for a smaller quantity quote. They will get back to me tomorrow.
stay tune!
Click to expand...
Click to collapse
NO, NO, NO....
PM me with the 1000 piece price. I'm sure I could distribute these here in the US.
Hi, under the recommendation of several people, I removed the stock thin film that protected the lens of the back camera. Is there a good way to protect it from scratch? Right now, I am using the SGP Ultra Capsule Series case as shown in the URL.
http://www.spigen.com/sgp-samsung-galaxy-note-case-ultra-capsule-series.html
Thanks.
hajime_android said:
Hi, under the recommendation of several people, I removed the stock thin film that protected the lens of the back camera. Is there a good way to protect it from scratch? Right now, I am using the SGP Ultra Capsule Series case as shown in the URL.
http://www.spigen.com/sgp-samsung-galaxy-note-case-ultra-capsule-series.html
Thanks.
Click to expand...
Click to collapse
That's overkill, just buy the Flip Cover, it will add 1mm around your camera lenses.
Since the Device sees the outside world through the Camera , using a layer on the camera will affect the amount of light getting in to camera and hence the quality of the image captured by the device will be low. So using a layer on the camera for protecting it from scratches is not a good option , it will protect the camera from the scratches but it will destroy the sole purpose of the camera. So alternative option will be using a case that can make the camera grooved-in and hence it can give considerable protection as camera surface will be grooved-inside the shell case.Choose the case wisely to get this kind of setup.
The glass covering the camera lens is almost flush with the aluminium border and the plastic back, so when you lay the phone on a flat surface it will almost touch it.
There are very thin cases, that add only 1 mm thickness to the phone and help separate the lens cover from the desk.
I'm trying to use InvisibleShield back proctector, it adheres well to the back cover, after a few days drying it does not seem that it's going to peel-off, and it helps maintaining the camera cover from touching the table.
hajime_android said:
Hi, under the recommendation of several people, I removed the stock thin film that protected the lens of the back camera. Is there a good way to protect it from scratch? Right now, I am using the SGP Ultra Capsule Series case as shown in the URL.
http://www.spigen.com/sgp-samsung-galaxy-note-case-ultra-capsule-series.html
Thanks.
Click to expand...
Click to collapse
What you already have is sufficient. Its not that easy to scratch the camera lens, and anything you put in front of it will in some way spoil the quality of your shots. Its not as though there is something available like a UV filter that you would use on an SLR camera. My advise, is just go out and take pictures.
I bought the Real look screen protector from amazon and it comes with 4 tiny screen protector for the back camera. Best imo, but I haven't tried any others
I also got scratches there. Sammy you disappointed again
Get a case with camera shutter.
Sammy used cheap material again, it should have been gorilla glass.
Boy124 said:
I also got scratches there. Sammy you disappointed again
Get a case with camera shutter.
Sammy used cheap material again, it should have been gorilla glass.
Click to expand...
Click to collapse
Just out of curiosity, what effect has that had on your picture quality? It shouldn't be that noticeable, if at all, unless its big damage that is. Usually. small scratches cause a 'softening' of the focus, but shouldn't be that apparent, unless your really looking for it. I'm not making excuses for samsung though, and indeed they would probably call it a feature, where your phone will take increasingly romantic soft photographs over time.
bigstarrynight said:
Just out of curiosity, what effect has that had on your picture quality? It shouldn't be that noticeable, if at all, unless its big damage that is. Usually. small scratches cause a 'softening' of the focus, but shouldn't be that apparent, unless your really looking for it. I'm not making excuses for samsung though, and indeed they would probably call it a feature, where your phone will take increasingly romantic soft photographs over time.
Click to expand...
Click to collapse
Got 3-4 scratches at the edge, so it did not affect picture quality.
I always used to put the phone face-down but still got scratches.
Boy124 said:
Got 3-4 scratches at the edge, so it did not affect picture quality.
I always used to put the phone face-down but still got scratches.
Click to expand...
Click to collapse
Its about what I expected. I wouldn't worry too much. I have an old clam phone and that is scratched to hell, but the pics don't show any noticeable effects. I know its far from a like for like comparison. Also, we used to scrub uv filters with scotch bright to make our own soft focus filters. You would be amazed at how much 'scratching' we had to do before we started to notice any effect. I know you want to treasure your investment, but I would get on and use it to the full. :good:
i got 4 scratches there.. can lense be replaced?
Sent from my GT-N7000 using xda premium
My Zenus PrintFolder protects the camera nicely. Love this case!
Sent from my GT-N7000 using xda app-developers app
Just made a rectangular piece of cheap plastic nd glued another plastic foldable holder for my x play. So now during photo time unfold nd zip down nd den zip up. Easy DIY nd works like a charm...
The glass covering the camera lens at the back is protruding so putting it down on any surface would make the glass touch it...how do you guys keep it from scratching?
koppee1 said:
The glass covering the camera lens at the back is protruding so putting it down on any surface would make the glass touch it...how do you guys keep it from scratching?
Click to expand...
Click to collapse
A case that's raised more than the camera is what I'm doing. Have done this for years without ever having my lens scratch.
Sent from my SM-N910U
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
lawtq said:
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
Click to expand...
Click to collapse
When I pick mine up from the shop I'll be leaving the plastic on - my S4 has a gaping scratch across its camera lense!
Normally there should be no need to worry unless you intend to drag your phone across a rocky road. It's protected by a veryt scratchresistant glass, simlar to sapphire glass. It can stand a heavy beating and still perform.
The only real problem is fat from your fingers smearing onto the protective glass, this will cause weird looking arefacts with highlights so make sure you keep it clean.
/ Magnus
lawtq said:
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
Click to expand...
Click to collapse
The plastic never covered over the sensor itself, only the outside edges.
Nitemare3219 said:
The plastic never covered over the sensor itself, only the outside edges.
Click to expand...
Click to collapse
Correct. Good protection. Or you could get the Nillkin Amazing H+ 9H Hardness Anti-Explosion Tempered Glass*for the note 4, it comes with 2 mini tempered glass camera lense protectors
Though I have not used any case or screen protector for the front screen, I have cut exact size glossy screen protector for the camera lens. I developed lots of scratches in S2 lens, from then on I started protecting camera lenses.
Note 4
If you look carefully the platic frame around the glass is just slightly above the glass so really the glass doesn't make contact with a flat surface
The Samsung s-view case is just big enough to keep the lens from touching. It's a good option if you are concerned about the lens getting scratched and want front of phone protection.
If the plastic cover doesn't affect the photos then chances are the odd scratch won't either..
Wife has S5 and glass on the lens seems pretty tough! No scratches yet!
When not using my Note 4, I shoot pictures with high end Nikon glass (lenses). Some will say to put a plain UV filter on the lens as a means of protection, never go naked. Others will ask why would one put an $80 piece of glass in front of finely tuned and crafted $2,500 piece of glass? Additionally, all those large sport photographer lenses you see taking photos.......no filters are made that size, they use hoods which extend several inches from the front of the lens as a means of protection. Now, given the camera in the Note 4 is not a high end DLSR you may not see the difference all that much, depending on the shot. However adding some form of adhoc protector over the camera will certainly cause some form of photo degradation.
If you have a phone case where the camera lens is recessed you should be perfectly fine if: (1) you pay attention how and where you place it down and (2) keep it out of your pants, bags...etc that hold keys and your loose change..etc.
Remove any added plastic or glass in front of your lens; take clearer and sharper pictures!
Goodluck
lawtq said:
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
Click to expand...
Click to collapse
I didn't even know there was one those lol I put a skinomi skin on mine hoping that it's raised just enough xD
---------- Post added at 01:45 PM ---------- Previous post was at 01:39 PM ----------
lawtq said:
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
Click to expand...
Click to collapse
I didn't even know there was one those lol I put a skinomi skin on mine hoping that it's raised just enough xD
Well, my first tip would be to not place your note 4 on a textured surface, press it down into the textured surface and then rubbing it vigorously against it, with your pressure RIGHT on the lens.
Other than that, just use it normally. Dont keep it in a bag of quarters, dont hack at it with nails, dont keep it with your keys in a pocket... The usual nobrainer things.
Should be totally fine. When I place it on a table, the lens doesnt touch the table.
Magnus3D said:
Normally there should be no need to worry unless you intend to drag your phone across a rocky road. It's protected by a veryt scratchresistant glass, simlar to sapphire glass. It can stand a heavy beating and still perform.
The only real problem is fat from your fingers smearing onto the protective glass, this will cause weird looking arefacts with highlights so make sure you keep it clean.
/ Magnus
Click to expand...
Click to collapse
/thread - really, the glass on the camera lens is the strongest glass you will find on your mobile device - applies to any phone.
Couldn't resist...cut out an extra screen protector and stuck it on the camera glass lol
lawtq said:
Correct. Good protection. Or you could get the Nillkin Amazing H+ 9H Hardness Anti-Explosion Tempered Glass*for the note 4, it comes with 2 mini tempered glass camera lense protectors
Click to expand...
Click to collapse
Never heard of this before.. Have Otterbox but realized my camera lens for smashed today while outside doing yard work... This what you use? Installation hard? Got URL? Thanks in advance.
DrDank said:
Never heard of this before.. Have Otterbox but realized my camera lens for smashed today while outside doing yard work... This what you use? Installation hard? Got URL? Thanks in advance.
Click to expand...
Click to collapse
I liked it. Gad the halo effect though unfortunately. But loved the 2 little camera screen protector too! Easy install.
Sorry, don't d have much time to search, url anyone it could i get camera protection for otterbox?
Got this phone for few weeks now and just noticed that i got scratches on the camera lens cover. I mean few weeks, really?! with case on and not placed together with any sharp objects. It's so annoying, my P10 plus is way more durable than this phone. Anyone having the same issue?.
coolraffy said:
Got this phone for few weeks now and just noticed that i got scratches on the camera lens cover. I mean few weeks, really?! with case on and not placed together with any sharp objects. It's so annoying, my P10 plus is way more durable than this phone. Anyone having the same issue?.
Click to expand...
Click to collapse
I have the same scratches plus a huge one(fingernail size) on the screen. Am a bit disappointed on how easy is to scratch the phone... .
Been using since day one and there's not a scratch in sight both front and back.
giwta said:
I have the same scratches plus a huge one(fingernail size) on the screen. Am a bit disappointed on how easy is to scratch the phone... .
Click to expand...
Click to collapse
I have 2 scratches on the screen too!! I’m so angry, had to buy a tempered glass...1k€ and scratched after 10 days :crying: so annoying.
Camera seems to be still ok, but I’ve bought a protector for it too (will get it next month).
No scratches here, and no protectors
giwta said:
I have the same scratches plus a huge one(fingernail size) on the screen. Am a bit disappointed on how easy is to scratch the phone... .
Click to expand...
Click to collapse
I feel you. The phone price is premium so we deserve high quality build phone which is clearly not the case here.
JJay666 said:
Been using since day one and there's not a scratch in sight both front and back.
Click to expand...
Click to collapse
How I wish I could turn back time :crying:
coolraffy said:
How I wish I could turn back time :crying:
Click to expand...
Click to collapse
The camera lens sticks out quite a bit. Have seen several phones like Samsung and Apple with cracked rear camera lens pieces, so I know better about that area. According to one source, they use aluminosilicate glass. Although the glass may not be exactly Gorilla Glass, Gorilla Glass itself is also aluminosilicate glass. Huawei's glass is likely a different chemical composition. The phone is the slipperiest I've ever encountered, my number one dislike about it.
There are no scratches in my situation. No case or protection has been used. Dislike cases and front tempered glass pieces. In general, careful which surfaces I lay the phone on and how I hold it. Have seen it sliding off uneven surfaces with too much ease.
Thanks for the warnings. I ordered a film protector for the curved screen and a tempered glass protector for the camera with the phone.
Isnt the screen a gorilla glass? I never dropped my phone and still Ive got a scratch on the bottom right corner of my screen. I could run my nail across it to feel the crack. Maybe it got scratched with a key or a coin. F***ng ridiculous. Never happened to any of my previous phones. I seriously doubt the quality now.
Because this is my first phone with a protruding rear camera so I started to worry about protection. Are there any protection of rear camera in modern phones?
Piospi said:
Because this is my first phone with a protruding rear camera so I started to worry about protection. Are there any protection of rear camera in modern phones?
Click to expand...
Click to collapse
Get a case that protects it.
The Spigen case protects the camera nicely
cd993 said:
The Spigen case protects the camera nicely
Click to expand...
Click to collapse
I have this case but I was thinking about some glass for rear camera
Piospi said:
I have this case but I was thinking about some glass for rear camera
Click to expand...
Click to collapse
Ah I see!
Then perhaps this is what you may like:
https://www.ebay.co.uk/itm/193457244169
AUNEOS Xperia 1 II Camera Film
I got this.
Anything you put on camera glass would mess with Zeiss coating. It's counter productive tbh to pay for a feature (i.e. Zeiss coating) but then handicap it. I'd just get a good case with raised edges around cameras to protect and leave the glass alone
mehdi_s82 said:
Anything you put on camera glass would mess with Zeiss coating. It's counter productive tbh to pay for a feature (i.e. Zeiss coating) but then handicap it. I'd just get a good case with raised edges around cameras to protect and leave the glass alone
Click to expand...
Click to collapse
How can it mess with the coating ? as its inside on lenses and not on glasss on the back ?
Marvido said:
How can it mess with the coating ? as its inside on lenses and not on glasss on the back ?
Click to expand...
Click to collapse
Lens glass and coating is extremely important for the quality of the light that passes through. By putting another layer of glass or plastic or whatever on top of already coated and optimized glass, you are interfering with flow of light
mehdi_s82 said:
Lens glass and coating is extremely important for the quality of the light that passes through. By putting another layer of glass or plastic or whatever on top of already coated and optimized glass, you are interfering with flow of light
Click to expand...
Click to collapse
Well i dont know if it has something to say or not...no idea about stuff like that tbh. But i bet its better than risk a scratched lense glass from pocket sand, a drop and etc...
Marvido said:
Well i dont know if it has something to say or not...no idea about stuff like that tbh. But i bet its better than risk a scratched lense glass from pocket sand, a drop and etc...
Click to expand...
Click to collapse
Agree.. I have already stick a transparent film on my rear camera.. no issue. happy with my Xperia 1 II
In fact i'm looking for something like this:
http://nillkin.org/search/?search=CamShield%20&limit=100
But they don't have for Sony brand. I have already sent a message to the website but no reply at all.
If i got transparent case (because i like the original purple mirror color) with a slider protection for the rear camera, i will definitively remove the film protection then.
If anyone know a brand similar to the CamShield type, it will be great. Thanks
I bought this glass camera protector from Japanese Amazon. Shipping was actually really fast to the US. It fits the camera module perfectly. It does attract fingerprints a bit more than the camera glass itself but it's very easy to wipe clean.