Related
What Are the specs of the Adam's Charger (Volts, Amps, Watts)?
Is it possible to charge it through mini usb ?
Model: MPA-40P
Input: 100-240V~50/60Hz 1A Max
Output: +19V -- 2.1 A
written on the charger
Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
inspiron41 said:
Model: MPA-40P
Input: 100-240V~50/60Hz 1A Max
Output: +19V -- 2.1 A
written on the charger
Click to expand...
Click to collapse
Those specs are like other laptops, dell, acer and the elocity use similar power adapters.
I think there is a thread mentioning one. I searched amazon at one time for one for a work mate, and also came up with a compatible car charger.
I'll edit and post once I find that post.
-CC
EDIT: http://forum.xda-developers.com/showthread.php?t=904678
Don't have any idea nor am I recommending anyone use this with thier adam, I am just passing on the info hoping it helps pin point the right one.
GOOGLE search: car charger Output: +19V -- 2.1 A
SAMSUNG CAR CHARGER 19V 2.1A 40W AA-PA2N40W AD39-00028A
CAR CHARGER DELL INSPIRON MINI DC ADAPTER 19V 2.1A 40W
EMACHINES 19V 2.1A 40W CAR CHARGER PLUG DC AUTO ADAPTER
does lg optimus x2 compatible with ipod touch wall charger rated 5.1V 1A or samsung android charger series with 5.1v 750mah?
please share volt and ampere rate on original charger or share your experience using wall charger other than original
thx
original charger: 4.8V/1A
with one charger that puts out 5.3V/1A the touchscreen starts to act weirdly
The charger (from a motorola RAZR II V8) I mainly use puts out 5V/850mA
amdultra said:
does lg optimus x2 compatible with ipod touch wall charger rated 5.1V 1A or samsung android charger series with 5.1v 750mah?
please share volt and ampere rate on original charger or share your experience using wall charger other than original
thx
Click to expand...
Click to collapse
I have used "sometimes" the charger of my sis's Samsung GS. And no problem encountered.
mrgian said:
I have used "sometimes" the charger of my sis's Samsung GS. And no problem encountered.
Click to expand...
Click to collapse
samsung Galaxy S? does it rated 5V and 850mah? okay so it seem wall charger from samsung galaxy series work fine,tommorow i will go to store to buy them, Original LG charger is expensive in here 14$ and there's chinese micro usb wall charger for 3$ that works fine dont know it's volt and mah rate
thx for answer:laugh:
got samsung traver charger adapter for 5$ rated 5v 1A it charge fine without problem.it say 5v 0.7A on the package maybe it's a fake or half fake/third party but still no problem
Building on the topic, I would like to know if I use the original charger but with other cable USB (commom) I will have same efficiency in recharge? And I would like to know if I will Have problem if I make this?
dont know about usb cable maybe yes,my only experience just with generic usb cable that dont work as data cable in sgs
Hello,
I have the following charger in my car. Can I use it to charge my Nexus6 ?
It has 10 Watts per port, 2 X 2.1A, 5V (voltage not sure).
http://www.belkin.com/my/IWCatProductPage.process?Product_Id=652450
Please suggest.
Thanks.
Why do you think you couldn't use it?
Sent from my Nexus 6
imnuts said:
Why do you think you couldn't use it?
Sent from my Nexus 6
Click to expand...
Click to collapse
I thought of checking with you, if the output of that belkin (current, voltage etc.) matches with the Nexus6. I understand that the phone will draw only the current that it needs (1.6A) from the charger. But not sure about the Voltage. It doesn't show the voltage in the specs also. So is the Nexus6 support all ranges of voltage - 5V, 9V and 12V ?
Please suggest.
Thanks.
Well if it is a standard USB connection on the charger and works with other devices, you can bet that it is 5v.
graydiggy said:
Well if it is a standard USB connection on the charger and works with other devices, you can bet that it is 5v.
Click to expand...
Click to collapse
Yes, mostly. I have this charger with me and don't want to buy another one, and I have 2 phones to charge while travelling in the car.
One question: Whether the Nexus6 support all ranges of voltage - 5V, 9V and 12V ? I have seen them printed on the inner side of the Turbo Charger. But want to know more about how it works.
Thanks.
The 9V/12V on the standard charger are for Qualcomm's Quick Charge. The phone will charge from a standard computer USB port outputting 5V/500mA (albeit very slowly) if you wanted to. The phone will draw as much power as the charger can output for a given voltage, up to the limits programmed into the kernel for the charging chip. Either the charger or the phone could be the rate limiter, but any charger that you can have a microUSB connection to plug into the phone should work.
so this combo is working for me:
http://www.amazon.com/gp/product/B010UT6Z3Q?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s01
http://www.amazon.com/gp/product/B00W98IQ5M?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00
the latter also allowed me to fastboot oem unlock.
so battery is at 59%, homescreen says 14 minutes till full.
cheers
can you please check with Ampere or GSAM for the charging speeds that you achieve?
does the device say fast/rapid charging?
Interested to hear the results from Ampere or GSAM as well
i cant get a good handle on how ampere works. it keeps measuring, takes forever, and fluctuates a lot.
with the aukey combo, i got 1830/2050mA @ 4.14v, at 53%, 37.7c
took it off charge for a while and tried again with the stock charger:
with the stock charger, i got 1850/1860mA(min/max) @ 4.159Vat 61%, 30.7c
I will try again at 50% today if I have time but I am pretty pleased with my little aukey combo. It was cheap.. I got it when there was a 7 dollar coupon floating around.
FYI, believe this is the same charger : http://www.amazon.com/gp/product/B00QEX83LA/
Use Promo Code DBVITSZB to drop price to $6.99
Can only purchase 1 at the discounted price.
TCstr8 said:
FYI, believe this is the same charger : http://www.amazon.com/gp/product/B00QEX83LA/
Use Promo Code DBVITSZB to drop price to $6.99
Can only purchase 1 at the discounted price.
Click to expand...
Click to collapse
Yep that would be the one. charging at 1800mA is not the fastest that the phone can charge at though. I'm going to hold off for the ones that enable the full speed of charging
http://www.droid-life.com/2015/10/19/nexus-6p-nexus-5x-quick-charge/
For 7 bux I think it's still a good deal for someone who doesnt have a spare to use
From the product description, you are only going to get 2A out of the charger. 5X doesn't do QC2.0, so you will only get the output at 5V, which for this charger is 2 amps.
Specifications:
Input: AC 100-240V
Output: 5V/2A, 9V/2A, 12V/1.5A
Dimensions2.69*2.05*0.87in)(68.5*52*22mm)
zackhow said:
From the product description, you are only going to get 2A out of the charger. 5X doesn't do QC2.0, so you will only get the output at 5V, which for this charger is 2 amps.
Specifications:
Input: AC 100-240V
Output: 5V/2A, 9V/2A, 12V/1.5A
Dimensions2.69*2.05*0.87in)(68.5*52*22mm)
Click to expand...
Click to collapse
But some Aukey chargers with AIPowertech like this one "charges all non-Quick ChargeTM 2.0 phones and tablets at their normal speed (up to 5 volts / 2.4A Max)with AIPower Tech Technology."
I've got the charger, just not the cables... so haven't been able to test.
I tested Aukey PA-T2 wall charger QC2.0 port ( orange one) on a Sony Xperia Z3 compact tablet
I recorded charging current up to 2.7Amp with the Aukey USB cable and up to 3.0 Amp with the Sony USB cable !!!! far more than the 2.0 Amp level current Aukey specifies......
The voltage - current output test show that the voltage stay in the 9.0V range with current up to 2.4Amp then fall down very quickly. It seems that the voltage stay at a value enough to deliver up to 3.0 Amp charging current to the tablet ....
Detailed test are here (http://78michel.unblog.fr/?p=860 in french....)
Current values where obtained from BMW recordings
Using the
Aukey Quick Charge 2.0 18W USB Turbo Wall Charger
And
http://www.amazon.com/dp/B01706YAXY
Getting Charging Rapidly. The juice isn't nearly as good as the stock charger, but this is the first combo with a USB-A to USB-C cable that I've gotten the Charging Rapidly notification.
7_michel said:
I tested Aukey PA-T2 wall charger QC2.0 port ( orange one) on a Sony Xperia Z3 compact tablet
I recorded charging current up to 2.7Amp with the Aukey USB cable and up to 3.0 Amp with the Sony USB cable !!!! far more than the 2.0 Amp level current Aukey specifies......
The voltage - current output test show that the voltage stay in the 9.0V range with current up to 2.4Amp then fall down very quickly. It seems that the voltage stay at a value enough to deliver up to 3.0 Amp charging current to the tablet ....
Detailed test are here (http://78michel.unblog.fr/?p=860 in french....)
Current values where obtained from BMW recordings
Click to expand...
Click to collapse
LOL, thanks... but that doesn't really help this 5X cause. Given that there is no quick charge on the 5X, it'll remain at 5V. The question is whether it'll pull more than the 2A or 2.4A specified on these chargers at 5V on a 5X.
PatcheZ said:
LOL, thanks... but that doesn't really help this 5X cause. Given that there is no quick charge on the 5X, it'll remain at 5V. The question is whether it'll pull more than the 2A or 2.4A specified on these chargers at 5V on a 5X.
Click to expand...
Click to collapse
Aukey quick charge 2.0 behave like a standard charger when connected to a non QC2.0 compatible device. The output voltage will stay to 5V so the current level will be very sensitive to the quality of the USB cable and limited by the maximum current the device will afford.
In practice it is very difficult to reach 2A charging level ( even if the charger is able to deliver such current) with a voltage output of only 5V , due to losses in cables and connectors
From my experience the higher current charging level I obtained was with a Samsung wall charger refence EP-TA10EWE which deliver an output voltage of up to 5.5V at 1.9A ( nominal voltage is claimed at 5.3V)
I got 1.7Amp charging current on my Nexus 5 while with the Aukey QC2.0 the current was only 1.1 Amp in exactly same conditions ( these recorded data are also reported in my blog .....in French.....)
7_michel said:
Aukey quick charge 2.0 behave like a standard charger when connected to a non QC2.0 compatible device. The output voltage will stay to 5V so the current level will be very sensitive to the quality of the USB cable and limited by the maximum current the device will afford.
In practice it is very difficult to reach 2A charging level ( even if the charger is able to deliver such current) with a voltage output of only 5V , due to losses in cables and connectors
From my experience the higher current charging level I obtained was with a Samsung wall charger refence EP-TA10EWE which deliver an output voltage of up to 5.5V at 1.9A ( nominal voltage is claimed at 5.3V)
I got 1.7Amp charging current on my Nexus 5 while with the Aukey QC2.0 the current was only 1.1 Amp in exactly same conditions ( these recorded data are also reported in my blog .....in French.....)
Click to expand...
Click to collapse
Thanks, didn't think to look at the link.
I wonder how older phones like the NA Galaxy S3 and Nexus 4 that both have QC1.0 ([email protected]) compare to the charging of the Nexus 5.
I'm curious as to how you did your testing, as I'm going to try my own testing once my cables come in. Did you drain all your phone's battery to 0 before performing each test? Phone airplane mode vs off? I also think that all tests must be done in relation to time, especially since the charging profile changes as the phone charges. I'm also curious as to how the non QC port on the Aukey performs, since it's spec'd at 2.4A @ 5V.
PatcheZ said:
Thanks, didn't think to look at the link.
I wonder how older phones like the NA Galaxy S3 and Nexus 4 that both have QC1.0 ([email protected]) compare to the charging of the Nexus 5.
I'm curious as to how you did your testing, as I'm going to try my own testing once my cables come in. Did you drain all your phone's battery to 0 before performing each test? Phone airplane mode vs off? I also think that all tests must be done in relation to time, especially since the charging profile changes as the phone charges. I'm also curious as to how the non QC port on the Aukey performs, since it's spec'd at 2.4A @ 5V.
Click to expand...
Click to collapse
All tests are made with battery drained to zero before starting , and a complete charge is done in each conditions. That way I can check that the full charging time is logically related to the recorded current values. The current is recorded during the complete cycle at a frequency of one value per mn.
The air plane mode was off.
Aukey QC port and non QC port are slighly differents when connected to non QC2.0 devices :
QC port delivers 5.1V in open circuit, the voltage encrease to 5.2V at 2.2Amp, on the contrary the non QC port delivers 5.2V in open circuit and decrease to 5.1V at 2.2Amp. I did not test them at higher current level.
I did not tested Galxy S3 or Nexus4 , but I beleive that a charger like the Samsung EP-TA10EWE will deliver them the maximum charging current they are programmed to accept, as obeserved for the Nexus 5.
I got the same charging current curve I recorded with Nexus 5 and Samsung EP-TA10EWE, with other set of charger and cable. This means that this charging curve is defined by the Nexus 5 inner program , not the charger characteristics. The problem is that we never know which is the max current curve internally programmed for each smartphone...... so it could be a long way to find it.......
TurboPower charger that comes with it is the only thing that will give it a fast charge.
I have no idea how or why Quick Charge tech was left out.
Mine does indeed say "TurboPower Connected" and charges super-fast when I use the USB C Quick Charge 3.0 AUKEY Amp Type-C Dual-Port Wall Charger and the USB C Quick Charge 3.0 AUKEY Car Charger with Dual AiPower Ports. I can't seem to find it now, but I remember reading somewhere that the Moto Z does use QC 3.0, otherwise I wouldn't have bought the above products. NOTE: I am going USB-C to USB-C.
Does not use 3.0.
http://forum.xda-developers.com/z-force/help/moto-z-forces-turbopower-quickcharge-t3429607
In short QC 2.0 and 3.0 don't follow usb c spec according to a top Google engineer. According to Usb c spec the vbus voltage should not exceed 5v. QC tech exceeds this by using 9v and 12v to achieve more power. Motorola built the Moto Z according to spec which allows you to ramp up the current (amps) to achieve more power which is why our stock charger outputs at 5.7amps. You don't need QC to charge fast with Usb c. Usb c with power delivery is actually better . Either way the QC chargers put out 15 watts total. Our turbo charger does 28.5 watts using 5v at 5.7 amps and is actually faster than what's out now. QC chargers use higher voltage to achieve this at 9v 1.7 amps 15 watts, a charger doing 5v 3a does the same 15 watts. So to turbo charge your phone don't use QC chargers unless it also outputs at least 5v at 3a that's the key. Anything less than 3a won't turbo charge. It needs to be a usb C to usb C cable so the charger should have a usb C port not a usb a port like most of you are trying to use. No other charger out now does more than 3amps besides the turbo charger until then use chargers that do 5v 3a. Verizon has a fast charger that supports this and all other fast charging tech.
Here is some info I have been updating on another thread. Here are some 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-Qualcomm-Certified-Quick-Charger-QC-3.0-33W-USB-Type-C-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
fliptwister said:
Here is some info I have been updating on another thread. Here are some 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-...-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
Click to expand...
Click to collapse
Will these charge as fast as the stock charger out of the box? And with a USB C cable does it need to support quick charge, or do all USB C cables support quick charge as long as you have it plugged into a USB C quick charge adapter like you linked to?
Nothing charges as fast as the stock charger as far as I know.
I looked around on Amazon to try to find a spare charger with the same speed as the OEM, but there are none as far as I know. QC actually goes against usb-c standard, so whoever has a phone that supports both is technically being shorted on charge speed. I will be waiting for the verified brands (ex. Anker/Aukey) to release a legitimate charger because there have been instances where wall chargers have completely destroyed devices. For the fastest charge, you'll want usb-c cables end to end, but since usb-c is not the standard yet, I would be very careful when buying lesser-known usb-c accessories. Z owners will have to wait for the market to catch up at this point.
Total side note but I wonder if the problems Samsung is having is because of their bastardized quick charge/type setup.
I'm happy we don't have QC.
fliptwister said:
Here is some info I have been updating on another thread. Here are some 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-Qualcomm-Certified-Quick-Charger-QC-3.0-33W-USB-Type-C-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
Click to expand...
Click to collapse
I bought the Choetech charger from amazon and it works great on my Z Force. no where near the OEM charger but still charges the phone dead to full in a little over an hour and a half. from my limited testing.
fr4nk1yn said:
Total side note but I wonder if the problems Samsung is having is because of their bastardized quick charge/type setup.
I'm happy we don't have QC.
Click to expand...
Click to collapse
Ha! I was thinking the same when I heard about battery fire from the Note 7.
I just bought another oem charger from amazon and called it a day.
squidder said:
I just bought another oem charger from amazon and called it a day.
Click to expand...
Click to collapse
But car charger?
sniperess said:
But car charger?
Click to expand...
Click to collapse
The car charger that Verizon sells turbo charges the phone, but not as quickly as the stock home charger. I don't think any charger will charge as fast as the stock home charger, since it's optimized for the phone. But the Verizon USB-C charger charges the phone plenty fast.
tgambitg said:
The car charger that Verizon sells turbo charges the phone, but not as quickly as the stock home charger. I don't think any charger will charge as fast as the stock home charger, since it's optimized for the phone. But the Verizon USB-C charger charges the phone plenty fast.
Click to expand...
Click to collapse
I can confirm this. I just got this phone on an upgrade after insisting to the Verizon sales representative that I did NOT want a Galaxy S8, that I was absolutely sure I didn't want the S8, and that I think the Z Force is a much better device than the S8. After seeing the genuine shock on his face that I slighted his phone, I bought the OtterBox case and the Verizon branded USB-C car charger with it.
The car charger definitely charges faster than my non quick charge USB-C cable, but not as fast as the stock charger. The stock charger will take me from ~5% to full in an hour. The Verizon car charger takes about an hour and twenty minutes to go from ~5% to full.
All in all, it was worth the money spent on the charger. It is definitely better than the 8 hour charge my standard USB-C usually takes.