[Q] Stuck in Sony Logo screen... - Xperia SP Q&A, Help & Troubleshooting

I had Flashed PACman ROM and today I tired to flash its Update today... But Installing the .zip failed and i rebooted My device... It only shows the SONY logo... Cant even boot to recovery... What to do nw??? Can I install the latest PACman ROM using flashtool (Fastboot mode)???

bharathulaganathan said:
Can I install the latest PACman ROM using flashtool (Fastboot mode)???
Click to expand...
Click to collapse
No, you can't.
Try flashing the .207 advanced kernel or doomlord kernel v13 with fastboot to see if you're able to get into recovery again.
If not, you'll have to flash an FTF file using flashtool and flash PAC again.

Gamm86 said:
No, you can't.
Try flashing the .207 advanced kernel or doomlord kernel v13 with fastboot to see if you're able to get into recovery again.
If not, you'll have to flash an FTF file using flashtool and flash PAC again.
Click to expand...
Click to collapse
Thanx a lot... I flashed FTF n got back to PAC-man...

Related

[Q] From CM 10.1 back to JB 4.1.2?

Hello
I'm actual on [ROM][FXP209][CM10.1] XperiaPremiuM™ v1 - The Xperia Xperiance.
Now i tried several things to go back to a jb 4.1.2 firmware. I tried it with the "flashtool" and also in the recovery mode cwm. The flashtool can't do it. I receive an error message. And if i flash a 4.1.2 in the recovery I stay in a bootloop.
Is somewhere a thread how to do that?
Thanks in advance.
Strange, you should be using flashtool without problems though! What error is it and which version of flashtool?
swisszulu said:
Hello
I'm actual on [ROM][FXP209][CM10.1] XperiaPremiuM™ v1 - The Xperia Xperiance.
Now i tried several things to go back to a jb 4.1.2 firmware. I tried it with the "flashtool" and also in the recovery mode cwm. The flashtool can't do it. I receive an error message. And if i flash a 4.1.2 in the recovery I stay in a bootloop.
Is somewhere a thread how to do that?
Thanks in advance.
Click to expand...
Click to collapse
What version of flashtool and what exactly does the error message say?
You dont need flash tool.
Just install stock kernel.
You can find it in cwm thread.
Download cwm with stock kernel
flash it from fastboot
fastboot flash boot boot.img
then restart your phone and enter recovery
flash your 4.1.2 rom.
Thats all
mehmetolgungun said:
You dont need flash tool.
Just install stock kernel.
You can find it in cwm thread.
Download cwm with stock kernel
flash it from fastboot
fastboot flash boot boot.img
then restart your phone and enter recovery
flash your 4.1.2 rom.
Thats all
Click to expand...
Click to collapse
Hello everybody
Thanks for all your help. After I installed a stock kernel and flashed it with fastboot then it worked. :good:
many greetings

[Q] Problem with CM10.1

I decided to flash CM10.1 the newest stable v.
That is what i do:
1Root the phone [latest official firmware updated via update center]
2Installing CWM
3Going in recovery and make factory reset, wipe cache, wipe dalvik
4Flashing CM zip
5Flashing Gaps zip
6Pressing "reboot now"
And then the phone goes off and that is all. If i hold the power button for ~3sec it vibrate and nothing more. No booting img no error sign no nothing. Cant go in recovery too.
Does anyone have a solution?
I tried it around 5-6 times - black screen all of them.
Edit: Bootloader is locked
Nox.BG said:
Edit: Bootloader is locked
Click to expand...
Click to collapse
Please read the instructions for flashing CM ROMs.
It needs an unlocked bootloader.
Repair your phone using pccompanion, or by flashing a stock ftf with flashtool
gregbradley said:
Please read the instructions for flashing CM ROMs.
It needs an unlocked bootloader.
Repair your phone using pccompanion, or by flashing a stock ftf with flashtool
Click to expand...
Click to collapse
Ty I will try that now
Edit: It worked = ] One last question - can I flash doom kernel under CM?
Nox.BG said:
Ty I will try that now
Edit: It worked = ] One last question - can I flash doom kernel under CM?
Click to expand...
Click to collapse
AFAIK not. CM uses its own custom kernel (hence the unlocked bootloader) and Doomkernel is for stockbased roms
Sent from my LT30p using xda app-developers app
Nox.BG said:
Ty I will try that now
Edit: It worked = ] One last question - can I flash doom kernel under CM?
Click to expand...
Click to collapse
NO!
You cannot flash cm with a locked boot loader.
You cannot flash doom kernel with a locked boot loader
You cannot use doom kernel with cm.
Its all in the instructions for cm Rom, doom kernel and in the all in one thread. Please read them
Sent from my LT30p using xda premium

[Q] Cant`t flash CM , Error status 7

Hi every one
In advance I would like to say I am new @Android. my SP is rooted, bootloader unlocked and I flashed XPERIA PURENESS v1.0 by sandy7. My problem is that I can not install CM11 from TWRP and CWM when I select .zip file installations starts and after 15 seconds abort with message "(Status 7) Installation Aborted". Can any one help me please how to install custom roms?
pouya_1991 said:
Hi every one
In advance I would like to say I am new @Android. my SP is rooted, bootloader unlocked and I flashed XPERIA PURENESS v1.0 by sandy7. My problem is that I can not install CM11 from TWRP and CWM when I select .zip file installations starts and after 15 seconds abort with message "(Status 7) Installation Aborted". Can any one help me please how to install custom roms?
Click to expand...
Click to collapse
Make sure that rom is completely downloaded.
CM11 is very special. You need to flash the kernel, the bootm.img that is inside the ROM's .zip. Flash it and then flash the ROM.
Again, if you are gonna flash another ROM first flash the correct kernel, let's say DooMLoRD's kernel for stock based like eXistenZ or the boot.img from CM10.2 ...after that you can flash the proper ROM
Just CM11 needs this.
cachanilla86 said:
CM11 is very special. You need to flash the kernel, the bootm.img that is inside the ROM's .zip. Flash it and then flash the ROM.
Again, if you are gonna flash another ROM first flash the correct kernel, let's say DooMLoRD's kernel for stock based like eXistenZ or the boot.img from CM10.2 ...after that you can flash the proper ROM
Just CM11 needs this.
Click to expand...
Click to collapse
I`m just flash boot.img inside the zip and NayakKernelv0 but nothing happen ,when I restart my phone just a gray screen appear
now I can`t access to recovery
pouya_1991 said:
I`m just flash boot.img inside the zip and NayakKernelv0 but nothing happen ,when I restart my phone just a gray screen appear
now I can`t access to recovery
Click to expand...
Click to collapse
Repair it with SEUS or PC Companion and re-do again what you've done
No. SUS and PC Companion only work with locked bootloader. But FlashTool supports unlocked bootloader. Try repairing with FlashTool.
Sent from my C5303 using xda app-developers app
I flash stock kernel by fastboot
but I confused why I can`t install CMod ?
pouya_1991 said:
I flash stock kernel by fastboot
but I confused why I can`t install CMod ?
Click to expand...
Click to collapse
first install CM kernel, then try to install the ROM
cachanilla86 said:
first install CM kernel, then try to install the ROM
Click to expand...
Click to collapse
when install CM kernel,I con`t access to recovery to flash CM Roms
I need a CM kernel that include recoverys
pouya_1991 said:
when install CM kernel,I con`t access to recovery to flash CM Roms
I need a CM kernel that include recoverys
Click to expand...
Click to collapse
- flash doomlord kernel
- copy cm11, gapps to phone
- flash cm11 from recovery (if status 7 error, just factory reset from recovery)
- flash gapps
- flash cm11 kernel
(sry of my english)

Bootloop FIXED

I've managed to get myself into a bootloop. Coming from the Honami Flavored Stock rom I flashed the 4.3 leaked rom from Doomlord rom with recovery, so before flashing the Doom kernel. Now stuck in a bootloop .
Can anyone give me directions how to go from here? Thanks.
Reflash kernel first and then the ROM.
when i try to reboot into fastboot the flashtool gives an error: this action needs a connected device in ADB mode so flashing the kernel doens't work?
Stitch15 said:
when i try to reboot into fastboot the flashtool gives an error: this action needs a connected device in ADB mode so flashing the kernel doens't work?
Click to expand...
Click to collapse
it means you're not in fastboot mode, cause of the bootloop. Use the force-off button on the back of the phone. Now you'll be able to enter fastbootmode
did something like that. Phone shows blue light now and i choose to hotboot the kernel for the 4.3 leak. Flashtool now says hotbooting selected kernel, but nothing seems to be happenig? Is that correct, or how long should it take?
Edit: somehow got fastboot working again and flashed the kernel. Now flashing the rom again with recovery. Hope all goes well this time. Thans for the help!
Stitch15 said:
did something like that. Phone shows blue light now and i choose to hotboot the kernel for the 4.3 leak. Flashtool now says hotbooting selected kernel, but nothing seems to be happenig? Is that correct, or how long should it take?
Click to expand...
Click to collapse
I have no experience with flashing kernels, but sometimes you just have to reconnect into fastboot and it'll immediately start flashing
Hi. you can flash the original ftf stock rom using flashtools
The rom thread is here http://forum.xda-developers.com/showthread.php?t=2311964
Bubben_85 said:
Hi. you can flash the original ftf stock rom using flashtools
The rom thread is here http://forum.xda-developers.com/showthread.php?t=2311964
Click to expand...
Click to collapse
those might have the offline charge bug, so use the ones from SUS
Nanostray said:
those might have the offline charge bug, so use the ones from SUS
Click to expand...
Click to collapse
Ok where do you find SUS?
Bubben_85 said:
Ok where do you find SUS?
Click to expand...
Click to collapse
sony site or google sony update service

Solved - Please Close Thread

*SOLVED
super0dd said:
Yes, it was a stupid mistake.
Locked bootloader. Couple of minutes ago, I just flashed in the XZDualRecovery and then flashed the kernel of TrinityVengeanceRaptorX™ HD 1.3 . After that, I made a serious mistake: I FORGOT TO FLASH THE ROM AND PRESSED "Reboot System".
So now, when I press the power button, my Z1 merely vibrates for once, sometimes with the red light blinking for a while. Yeah, it bricked. Not even show the bootlogo.
Before I flash that kernel, I had backed up my whole system, every partition, so is it possible that I could re-flash the recovery and then restore everything?
Or I have to use a ftf to wipe out everything entirely?
Click to expand...
Click to collapse
It's not a hardbrick
Just flash stock kernel via flashtool (fastboot) then xz recovery and restore your backup
Last time i flashed mtk cwm as kernel on my z1:fingers-crossed:
Red-code said:
It's not a hardbrick
Click to expand...
Click to collapse
yeah, i just figured out how to flash a stock kernel from stock ftf using flashtool.
super0dd said:
yeah, i just figured out how to flash a stock kernel from stock ftf using flashtool.
Click to expand...
Click to collapse
extract ftf as zip then flash the kernel file in fastboot

Categories

Resources