So I stupidly flahsed Otter2 on my KFHD 8.9. It will not boot at all, black screen, I have already tried fastboot cable. Can I send this to anyone to fix?
Thanks!
last4ever said:
So I stupidly flahsed Otter2 on my KFHD 8.9. It will not boot at all, black screen, I have already tried fastboot cable. Can I send this to anyone to fix?
Thanks!
Click to expand...
Click to collapse
It's hard bricked mate
Sent from my device running CyanogenMod 11
Thanks. Is the consensus then that this is a lost cause?
Try to find one that's cracked on eBay and swap out the mainboard
Related
Hello,
My Kindle was bricked after using the system.img recovery tool to restore the original firmware to sell it. But it was bricked and say "Your Kindle cannot boot." So I need to know how to make a Factory Cable because I need one quick and im good with wires and soldering.
Also if there is any other way WITHOUT factory cable please tell me.
Thanks
TheDoolster said:
Hello,
My Kindle was bricked after using the system.img recovery tool to restore the original firmware to sell it. But it was bricked and say "Your Kindle cannot boot." So I need to know how to make a Factory Cable because I need one quick and im good with wires and soldering.
Also if there is any other way WITHOUT factory cable please tell me.
Thanks
Click to expand...
Click to collapse
Never mind. I called Amazon and since there are no trace of my rooted apps they are sending me a new one for free!
Hi how are you,as my title says.. i bricked my kindle.. well i was trying to install the twrp and 2nd bootloader,i think it happened because im running the latest update 7.4.3 ... the thing is i didnt make a backup,after flash the room "supposedly" i turned my kindle off.. after that my kindle does not go on,is stuck on the kindle fire logo,and it repeats over and over again.. i recently bought the factory cable to get the fastboot but im still waiting for it... is there any other way to make it works?? another thing is sorry about my english,i hope you can help me guys.. =)
I loaded the wrong boot loader on to my 7" kindle fire HD. Now it's dead. No power, nothing. I know some people were trying to find a solution but I haven't found anything. Please help!
jesseakc said:
I loaded the wrong boot loader on to my 7" kindle fire HD. Now it's dead. No power, nothing. I know some people were trying to find a solution but I haven't found anything. Please help!
Click to expand...
Click to collapse
There may or may not be a way to fix it with some soldering, sdcard reader and a Linux live cd, i haven't been as active in the community lately so im not sure how the efforts went with the 7" model, seems like we had it working on all the models except that particular one last i checked. Outside of that a hardbrick is not recoverable.
I have a 5th gen Fire and I tried downgrading to 5.12 from 5.32.x...it didn't work... I now have a tablet which doesn't show any signs of power... I've tried different software I.e. KFU and the Kindle Unbrick tool but no luck....anyway when I connect it to the PC I hear the sound of when I plug in a USB but then about 3 seconds after then it disconnects and then reconnects and so on but never shows anything on the screen it is completely black. My problem is that it won't stay on long enough to do any significant reflash or any kind of fix. If anyone can help me in keeping it on long enough then I could flash with its stock update. I may even have to solder some points on the board but that's fine so long as I can fix it....
Thanks in advanced any help is appreciated
willie018 said:
I have a 5th gen Fire and I tried downgrading to 5.12 from 5.32.x...it didn't work... I now have a tablet which doesn't show any signs of power... I've tried different software I.e. KFU and the Kindle Unbrick tool but no luck....anyway when I connect it to the PC I hear the sound of when I plug in a USB but then about 3 seconds after then it disconnects and then reconnects and so on but never shows anything on the screen it is completely black. My problem is that it won't stay on long enough to do any significant reflash or any kind of fix. If anyone can help me in keeping it on long enough then I could flash with its stock update. I may even have to solder some points on the board but that's fine so long as I can fix it....
Thanks in advanced any help is appreciated
Click to expand...
Click to collapse
This section is for the 1st generation Fire
see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum links
Sent from my XT1254 using Tapatalk
Edit: thread moved to Fire forum
I have ended up in the exact same spot after attempting a downgrade to 5.1.1.
I downgraded to try and fix an odd problem. I recently wiped my CM version back to stock, but when registering the device it forced me into Kid's Edition - I did the downgrade in an attempt to bypass that. Now it's just a paperweight/doorstop.
dixonge said:
I have ended up in the exact same spot after attempting a downgrade to 5.1.1.
I downgraded to try and fix an odd problem. I recently wiped my CM version back to stock, but when registering the device it forced me into Kid's Edition - I did the downgrade in an attempt to bypass that. Now it's just a paperweight/doorstop.
Click to expand...
Click to collapse
Sorry for your loss; device is unrecoverable. Contact Amazon for a courtesy replacement is still under warranty.
Hello,
i tried to install an older version of the original firmware of my Amazon Fire 7, but something didnt work.
Since then it keeps connecting and disconnecting from USB. This means, i can't do anything in ADB right now, because i don't see the device there.
The screen of my Fire keeps being black. No logo, nothing. I just know, that it is running somehow, because i can hear the (dis)connecting sound on my computer and also see some activity in the device manager.
Is there any way to recover it, or is it hard-bricked now?
Thanks for your help.
schousda said:
Hello,
i tried to install an older version of the original firmware of my Amazon Fire 7, but something didnt work.
Since then it keeps connecting and disconnecting from USB. This means, i can't do anything in ADB right now, because i don't see the device there.
The screen of my Fire keeps being black. No logo, nothing. I just know, that it is running somehow, because i can hear the (dis)connecting sound on my computer and also see some activity in the device manager.
Is there any way to recover it, or is it hard-bricked now?
Thanks for your help.
Click to expand...
Click to collapse
yes.....
https://forum.xda-developers.com/amazon-fire/development/unlock-fire-t3899860
Michajin said:
yes.....
https://forum.xda-developers.com/amazon-fire/development/unlock-fire-t3899860
Click to expand...
Click to collapse
Thanks for this link.
I managed to recover my tablet.
Also used this to install Lineage after i installed the new bootloader.
schousda said:
Thanks for this link.
I managed to recover my tablet.
Also used this to install Lineage after i installed the new bootloader.
Click to expand...
Click to collapse
I think I'm having the same issue u had, black screen I can hear it rebooting when I plug usb. Please how did I fix this ?