I have a new Z3C and want to use the Wireless Media Transfer option but I cannot get the device to pair with a Windows 7 x64 PC (I've tried two PCs now). I have the device in MTP mode, but when I right-click on "Xperia Z3 Compact" and choose the "Network Configuration" option the wizard hangs while trying to transfer the settings. I even installed PC Companion, and made sure everything is up-to-date but I just cannot get it to work.
I want to use this feature so I can access my micro SD card without messing with the flaps: transferring music and tag editing using mp3tag are essential to me and I don't want to wear out those delicate little flaps!
Well I tried pairing wireless with Win. 7 and failed too, don't know exactly what's the problem. My suggestion would be to use ES explorer though. You can add your PC to the LAN tab by entering the internal IP and just copy to the internal memory (no SD card access thanks to Google). From there the preinstalled File Commander can move your music to SD.
rec71 said:
I have a new Z3C and want to use the Wireless Media Transfer option but I cannot get the device to pair with a Windows 7 x64 PC (I've tried two PCs now). I have the device in MTP mode, but when I right-click on "Xperia Z3 Compact" and choose the "Network Configuration" option the wizard hangs while trying to transfer the settings. ...
Click to expand...
Click to collapse
Had the same issue on Win7, hang while transferring settings. On the 3rd attempt it did pair successfully. I noticed that windows was installing a device driver on the first pairing attempt, maybe that just needed to complete first.
The Transfer Settings stage does take a while, so it may just look like it's hanging. How long did you try it? Also you may need to allow portable devices access in your firewall (as the popup advises).
I left it a good 10 minutes. No drivers were being installed and no firewall popups appeared (I don't use the Windows software firewall).
Same here (64bit) win 8.1 I let it run until the 'can't complete' dialogue shows
Having the same issue here - anyone else fixed it until now ?
It happens to me at first... But if you will make screen time out more like 10 + min, while pairing configuration it does connect. Its because of screen goes off then it wont connect.
Sent from my D5803 using XDA Free mobile app
What helped me was making sure the screen didn't turn off, might be an idea too to temp disable Stamina while it goes through its process, it does take a while.
techguyone said:
What helped me was making sure the screen didn't turn off, might be an idea too to temp disable Stamina while it goes through its process, it does take a while.
Click to expand...
Click to collapse
Yup, that was it - and ofcourse no vpn active..
This worked for me
rec71 said:
I have a new Z3C and want to use the Wireless Media Transfer option but I cannot get the device to pair with a Windows 7 x64 PC (I've tried two PCs now). I have the device in MTP mode, but when I right-click on "Xperia Z3 Compact" and choose the "Network Configuration" option the wizard hangs while trying to transfer the settings. I even installed PC Companion, and made sure everything is up-to-date but I just cannot get it to work.
I want to use this feature so I can access my micro SD card without messing with the flaps: transferring music and tag editing using mp3tag are essential to me and I don't want to wear out those delicate little flaps!
Click to expand...
Click to collapse
I had the same problem, solved it this way (hope I remember correctly)
on phone:
- set screen sleep to 30 minutes (Settings - Display - Sleep)
- turn off stamina mode (Settings - Power Management)
-plug into PC with USB
on PC:
- "Computer", right click "Xperia Z3 Compact" and select "Network Configuration"
- Click through with "Next/OK" until you get the screen that says something about "transfering settings" (or something like that) where it seemed to hang on previous attempts.
...and now the most important part - WALK AWAY!! Make a sandwich or something, come back in 30 mins and all should be OK - it's not actually hanging, just looks unresponsive while it does it's thing - be patient.
Good luck!
I did pair with PC using USB. The problem I have is that it hangs for 1 or 2 minutes while trying to connect to PC with WI-FI. Then it fails. I try for like 15 times, then for no reason it works. It only happens when I'm using my home wi-fi. I tried to connect with a friend's wifi, and it worked in a few seconds.
Related
Hi,
Just got my xperia today, but I'm still new to Windows Mobile. I want to transfer media files to my phone from my mac, is there any software that can let me do this relatively easily like by drag and drop? My mac doesn't seem to even recognize the x1. Also, I have a 8gb microsd card already inserted into the phone, but it doesn't seem to recognize the memory at all. Any help would be great, thanks.
I don't have a mac, so can't help much, but there's one thing I can think of. you might have tried it already, but...
Did you try going into Start > Settings > Connections > USB to PC and setting this to "disk drive"? I would have thought that this makes the phone act just like a USB drive, so there wouldn't be a problem as long as the Mac can see standard USB sticks.
Active Sync certainly won't work, it being Microsoft Active Sync, but maybe as a USB "Drive" it might...
Hi ... You must use Missing Sync ... you can use it via USB or bluetooth ...
Bye.
The Missing Sync seems the most popular with Mac users - apparently really good:
http://www.markspace.com/products/windowsmobile/mac/windows-mobile-sync-software.html
I just use the Disk Drive option in USBtoPC.exe ...
Hey guys, thanks for the quick responses and help so far. The disk to drive has an issue because it needs a memory card to be inserted, and mine isn't being recognized for some reason. Oddly enough, whenever I unplug it from the miniUSB, the memory card suddenly becomes available. I downloaded the Missing Sync but I may have gotten a weird version or something(4.0 something) that was talking about a patch.
Feel really stupid about this. Is there any easy way to just drag and drop music and videos onto this phone?
Sync wth Mac
Hi Guys,
I am using a WM5.0 Dopod 838 Pro but looking to change to experia soon. I used eltima syncmate to sync my Dopod to my Mac. The freeware works great and IMHO, it is more stable than Missing Sync.
Cheers
aFo3262 said:
Hey guys, thanks for the quick responses and help so far. The disk to drive has an issue because it needs a memory card to be inserted, and mine isn't being recognized for some reason. Oddly enough, whenever I unplug it from the miniUSB, the memory card suddenly becomes available. I downloaded the Missing Sync but I may have gotten a weird version or something(4.0 something) that was talking about a patch.
Feel really stupid about this. Is there any easy way to just drag and drop music and videos onto this phone?
Click to expand...
Click to collapse
What ROM are you running?
I will check the rom version in a second, but I remember that it was dated for the 29th of August. I got the x1 to mount as a disk drive, but I was confused about where to drag my media files for the media panel to recognize the stuff in my storage card. Not only that, but dragging and dropping was incredibly slow and I was only able to get 5-6 songs on to my phone before the lag became unbearable.
hey guys thanks for the help in the missing sync. New problem now lol. I transfered my music and vids to my memory card and the media panel read it fine. But my touchFLO3d manila HD can't seem to detect any media from the card at all. Is there any way to change this?
I got my Xperia on Friday and have spent the last 2 1/2 days trying to sync it with my Mac using Missing Sync. I was using MS V4.0.3 and then after upgrading to V4.0.4 and a hard reset (I think) things stopped working. The MS activity log said it couldn't connect to the sync client on the X1 (I also couldn't sync my old Dell Axim X51v either). I tried uninstalling and re-installing multiple times but still no success. After 2 days, I binned MS thinking it was the problem and purchased Eltima's SyncMate. Again same result, couldn't connect with the sync server.
After much googling if found the following post (http://forums.markspace.com/viewtopic.php?f=5&t=5349) in Mark Spaces forums of all places. Copied and pasted the commands into Terminal restarted and everything is fine. Good old Apple.
Hi,
Using SyncMate right now with my new X1.
I'm using the free version, so far contact syncing is ok with the only problem being certain number fields in Mac's Addressbook not showing up in the phone. But this is pretty common problem among all Mac <-> WM syncing. Just need to play around with the info fields in Mac Addressbook.
Right now the problem is the internet sharing to the phone is not working (sharing Mac's LAN connection to the phone). I know this used to work when I was using the same copy of SyncMate with a WM 5.1 Palm Tero I had borrowed. So far SyncMate doesn't seem to show the dialogue box that it discovered a internet connection and is sharing it with the phone.
Of course the Mac has working internet connection.. I'm using it now...
Any help and advice on this issue or any other Mac <-> WM tips are welcome!
As was said above, I use syncmate on my wifes. I used to use missing sync but it didn't always seem to recognise teh phone and had limited features. So I use Syncmate now. Have also tried pocketmac whcih was similar. Both softwares allow you to sync files, contacts, calander, install softwares adn will also mount the phoen as a hardisc on your mac without stopping eth phone from still being able to access it (if you put it into usb disc mode the phone no longer has access to teh memory card untill you disconnect). They can also connect wireless, usb or bluetooth.
I'd try either of the above instead of missing sync. Missing sync just didn't do the job well enough if you ask me.
As for the internet conenction issue, mine just works......have you checked teh connection settings in teh actual phone?
Hi
I tried using the free version of Syncmate with my Xperia, it doesnt recognize my phone. I am using the latest R2 ROM version. Any help ???
thanks!
internet
can please somebody help me, i have a mac and se x1 and i cant connect on internet from my mac via x1 i tried everything over usb, bt, internet sharing, sync mate , nothing works please help.
p.s. sorry about my English
This has been posted in this forum before but here it is again … I've never successfully used my X1 as a broadband modem via USB (it has something to do with ActiveSync, I think however, I use my X1 as a modem all the time using BT).
For a BT connection:
1. Pair your X1 and Mac (using the OS X BT preference panel)
2. On the X1 start Internet Sharing - PC CONNECTION should be set to BLUETOOTH PAN and NETWORK CONNECTION to whatever your ISP requires - SELECT CONNECT down in the task bar (bottom left) - should now say CONNECTED.
3. On your Mac open the BT Preference Panel from System Preferences or the clicking on the BT status icon in the menu bar (top right of screen). Click on your Xperia device (to select it) in the left-hand side-bar. Its status should be displayed in the right-hand panel (paired - yes; connected - no). Click on the task button (the one with the cogged wheel next to the minus button, bottom left-hand corner of the BT preference panel and select CONNECT TO NETWORK - status should change to connected.
4. To disconnect - select disconnect in the task bar of Internet Sharing on the phone or disconnect from network in the Mac's BT preference panel.
The process has to be done in this order. If you don't connect to the internet with the phone first, the process fails.
nonno said:
This has been posted in this forum before but here it is again … I've never successfully used my X1 as a broadband modem via USB (it has something to do with ActiveSync, I think however, I use my X1 as a modem all the time using BT).
For a BT connection:
1. Pair your X1 and Mac (using the OS X BT preference panel)
...
Click to expand...
Click to collapse
What OSX version do you use to build up the PAN between Mac and Xperia?
Seems not to be OSX 10.4 because it has no
task button (the one with the cogged wheel next to the minus button, bottom left-...
Click to expand...
Click to collapse
Sync Xperia with mac
Hi everyone, new to the forum so bear with me. I've recently acquired the software "The Missing Sync" to be allowed to edit and fix up my phone through my mac. When I plug in my phone, the computer only recognizes it as a mass storage device and the program will not detect it. Do I need to update the firmware on the phone to up to date with the most current version of The Missing Sync? Any help would be greatly appreciated.
Regards
Sorry I really need to ask. I have been trying in vain to bluetooth files from my laptop to my X1 (R3AA). As of now, my phone can send (or beam) files via bluetooth to my laptop, but not receive anything at all.
Unlike my P1i, the Bluetooth services available for the X1 (showing up on my laptop) does not include the "file transfer service" that was used for exploring the phone's memory stick via bluetooth a la all the other six older Sony ericsson phones that I've previously owned...
I've already:
(i) Checked the allowing incoming beams box in "settings"
(ii) Installed Obex Inbox (but I think that simply is to allow incoming bluetooth beams to get stored in your storage card instead of device)
Is there anything else I haven't done? I right click on my laptop the file after pairing with my X1 and when I hit "send via bluetooth", basically nothing happens. Man, even my old t610i didn't have problems with bluetooth receiving...
it works for me bro.
start > settings > bt > mode > check both boxes! > ok
this will make X1 "visible" for your laptop.
BR!
-mattx- said:
Sorry I really need to ask. I have been trying in vain to bluetooth files from my laptop to my X1 (R3AA). As of now, my phone can send (or beam) files via bluetooth to my laptop, but not receive anything at all.
Click to expand...
Click to collapse
Hmmm... my X1 works well too. Do you have a custom ROM? in case, which one?
so, you select the file, send to, X1 and nothing happen on the screen of your laptop? if so, it is a laptop problem, not X1 problem.
If it would have been an X1 problem, you would have seen a progression bar saying "discovering services available on X1" and then disappearing because of your mentioned X1 problem.
I'll be waiting for your answers to help you!
-mattx- said:
Unlike my P1i, the Bluetooth services available for the X1 (showing up on my laptop) does not include the "file transfer service" that was used for exploring the phone's memory stick via bluetooth a la all the other six older Sony ericsson phones that I've previously owned...
Click to expand...
Click to collapse
Not sure about why your bluetooth is not receiving, but you can make your laptop access your memory stick as a normal folder to browse the files.
Follow these steps.
1. Make sure you have activesync installed on your laptop.
2. Go to activesync on your phone and select connect via bluetooth.
This should establish a activesync connection thro bluetooth, similar to what you get thro a USB connection.
bharat4ever said:
Not sure about why your bluetooth is not receiving, but you can make your laptop access your memory stick as a normal folder to browse the files.
Follow these steps.
1. Make sure you have activesync installed on your laptop.
2. Go to activesync on your phone and select connect via bluetooth.
This should establish a activesync connection thro bluetooth, similar to what you get thro a USB connection.
Click to expand...
Click to collapse
Hmm. doesn't work here,
Vista, Windows Mobile Device Center.
Any clue?
hmm, next time you connect your phone thro usb, let it connect completely to windows mobile device center, then go to Mobile device setttings, and click on connection settings.
Make sure the check box "Allow connections from one of the following" is checked, and "Bluetooth" is selected from the list. I hope this works. Fingers crossed.
Hi guys,
Thanks for the replies, which help steer me in the correct direction. It seems Activesync is responsible for "unlocking" the bluetooth functions (I kid you not). Finally solved it. This is how I did it (based on advice given):
1. Checked all boxes in Bluetooth options in settings: visibility/bluetooth on/authentication passkey required
2. X1 was already paired up with my laptop
3. Connected to my laptop via USB and activesync loaded automatically
4. Opened up "My Bluetooth Places", which is the program that comes with installation of the Bluesoleil program on my laptop
5. Heard a beep on my X1 for the first time when I did this (this was the first time I was connected on USB via activesync AND activating bluetooth AND accessing the bluetooth places folder) - I think this was what activated it in the end - sorry if i'm not explaining it too well here, but it did the trick
Note: Not sure if a few more options popped up in "My Bluetooth places" folder I don't recall seeing bluetooth messaging/contacts there previously. My OS is XP home, using the default R3A rom.
6. I could transfer files via bluetooth already from my laptop to X1...
*I still haven't been able to manage to get within the file directory tree using bluetooth, bharat4ever, which program (and bluetooth service) might I ask did you use to do that?*
Additional thingys: I think it's important to use a proper software for bluetooth file transfers - Bluesoleil is much better imo than that standard Widcomm (oldish as well) program that came default with my laptop.
I was also wondering if I could transfer multiple files via bluetooth and seems like resco explorer can do the trick, though folders can't be sent via bluetooth - tho the contents inside them will.
Having this problem:
When device is connected to any PC, nothing is detected at either end. Nothing happens (except power to the phone).
Tried switching between activesync and disc drive modes, with or without advanced network functionality, but the problem is prior to that.
I have to say these WM devices are pretty unreliable, I've had USB problems on more than one of them, compared with none on any other usb device.
Grateful for any help.
when you say you change modes, do you mean that you change it in the settings or when you connect the USB a screen pops up?
I am having the same issue. My phone is basically useless, I don't have warranty to send it back to HTC either.
Many people are having issues with connecting with Windows 7. I think there are solutions, but most of those people don't post replies when they solve their problems...
I have been able to connect to Windows XP, then suddenly one day it stopped for no apparent reason. So I don't think the OS is the problem in this case.
how about your guys try to checke the windows firewall setting first?
on the exception list, make sure all related activesync task are selected.
then try again.. hope that help
Tried that - in fact, turned off my firewall entirely - still no luck.
Device connects, and comes up as an "unknown device". Nothing else in Windows 7 sees it - not WMDC, or File Explorer, or anything.
This is really disappointing - how can a Windows Mobile device not work at all with a Windows OS?
i also have my firewall turned off, even worse thing is that the computer doesn't even recognize that a device has been plugged.
Same here, shaks 4.3 ...
I can't believe that Windows has this device listed as compatible with Windows 7. It isn't working, period.
mine stopped connecting to vista one day but would charge. I went an got another usb to mini usb cord at the PX and plugged it in and it now connects with my laptop and my mac. replace your cord before you start hard reseting.
romagnus said:
mine stopped connecting to vista one day but would charge. I went an got another usb to mini usb cord at the PX and plugged it in and it now connects with my laptop and my mac. replace your cord before you start hard reseting.
Click to expand...
Click to collapse
I've tried several cords... but thanks for the advice.
i contacted HTC and asked them how much for repair w/o warranty, this is their response:
We apologize for any issues you are experiencing with your device and would be happy to assist. While warranty coverage would depend on a diagnosis by one of our certified technicians, based on the problems symptoms you have provided, costs for repairs could range from approximately $373.00 to $428.00. Please contact Customer Care at 1-888-617-1113 for service options and to set up an RMA for repair if desired.
this is hilarious, fking HTC ppl make sh*t w/ no technical support and charge ridiculous for repairs. i dont know what they thinking
had the same problem...tried everything to fix. i am with Verizon. Went to my Verizon store. They called in for me which resulted in Verizon sending my a replacement (refurb) which ironically(?) turned out to have a different issue. Back to store...another call...sent me a brand new diamond. everything ok so far. don't deal with htc....go to your carrier.
I've done a hard reset on my diamond, but the usb problem remains. Now I'm thinking it's a mechanical problem. I'll try and clean out the hole somehow and see if that helps.
I'm using windows 7 64 bit and the latest Windows Mobile device Centre with the Windows Firewall on and I have no problems connecting my HTC HD and Diamond.
To all of you who still struggle on UBS connection.
Here's my solution based on reading forums for almost two weeks and trying hundreds of settings. I'm using Windows 7 Ultimate.
First you have to set regional settings on both PC and device on English.
1. Make suse you select ONLY ActiveSync under Settings/All Settings/Connections/USB to PC/ NO OTHER SELLECTIONS.
2. Tick "When the device is turned on, do not ...." under Settings/System/Power ( later, when establish connection for couple times you can uncheck it)
3. If Using NOD 32 disable Treat Sence and Disable detection of Potentionaly dangerous programs ( if using other antivirus disable similar options - they block connections they think are dangerous)
4. On your PC Uninstall ALL USB controlers and Hubs.
5. On Your device on home screen check and stop all programs running.
6. Turn OFF PC.
7. Connect USB cable to PC USB port and to phone.
8. Turn on PC and wait untill Windows instals all the usb stuff. If everything is OK Windows should recognize and install HTC PPC .... The WMDC or ActiveSync should start automatically. IF not start it manually and disconnect and connect usb cable on ppc. Wait untill it connects and HAVE FUN !!!
First couple of times you should be carefull not to move the phone or cable so you wont lose connection.
Hope this helps others, since I managed to get it work for myself.
Happy New Year to all of You!
will try this tomorrow,
btw, what's NOD32 and WMDC?
thanks for the post
OS -> Windows 7
PPC-> Mobile 6.1
Unchecked the "Enable advanced network functionality" box.
Until that it would connect just under Disk Drive option, Now it runs just fine with active sync too. Thank you
Hi everyone,
I'm having issues connecting my Samsung Captivate to my computer. For about a week, it worked fine, I was able to transfer files to my phone but recently I noticed that the "USB connected" notification is not showing on the phone when plugged in to the computer.
Now, when I plug in my phone to the computer it just charges but doesn't comunicate with my computer. A friend of mine bought the same phone right after I did and he gets the "USB connected" connected when he plugs in his.
I tried using his USB cable but again, the phone is not recognized by Windows nor the phone detects it is connected to the computer. I've tried installing several USB drivers that I've come across on several forums, but nothing. I even downloaded and updated Kies to the latest version, but still nothing.
My phone is unlocked and NOT rooted, and I'm using Windows 7 x64. I've set the USB Settings to Mass Storage, even to Ask on Connection, but it doesn't ask anything when I connect the phone to a USB on my computer.
Sometimes Windows knows there is a device connected but says it couldn't recognize it.
I already did a factory reset, but the issue was not solved. I've tried connecting it to other computers, but still hasn't been able to connect my phone correctly.
What could it be?
Thanks!
Hmm. You have Mass Storage selected and up-to-date USB drivers. Try selecting USB-Debugging and Stay Awake in the Development option of your phone. If that doesn't fix it, then I have a few other ideas.
Make sure the usb door is completely open, it should click into place, some users have reported this solves their usb issues.
I did what you told me, but still my phone ain't recognized by Windows nor my phone is aware that it has been conected to a computer
What other ideas do you have in mind?
catire said:
Make sure the usb door is completely open, it should click into place, some users have reported this solves their usb issues.
Click to expand...
Click to collapse
I'm sure usb door is completely opened
Have you tried using a different USB outlet on your computer? I had this same issue when I plugged my phone up using the USB outlet on the front of my computer then when I tried the one on the back of my computer it worked just fine.
Are you running a launcher app? I use launcher pro and can't connect until I change back to the default launcher with home switcher and launch it.
jgchaval said:
I did what you told me, but still my phone ain't recognized by Windows nor my phone is aware that it has been conected to a computer
What other ideas do you have in mind?
Click to expand...
Click to collapse
First off, think back. If it worked for a week and then suddenly stopped, what changed? Maybe you updated something on Windows or changed something on your phone. There's a reason it just stopped.
You can try using a free program called USBDeview.
It might do the trick for you and help you install the correct drivers. I'm thinking you no longer have them.
1. Download USBDeview (link is above)
2. Plug your phone in and open the program. Find all the HTC drivers-delete them
3. Unplug your phone and plug it back in
4. The correct drivers should install automatically
You can also try updating the drivers manually.
Galaxy S drivers (These are for ADB, but will work fine)
1. Click the Start Menu on your computer and right click "Computer"
2. Choose "Manage" --> it will ask you to continue --> "Device Manager"
3. Plug you phone in and look for it to pop up, probably under Portable Devices
4. Right click --> "Properties" --> "Update Driver" --> "Browse" --> "Let Me Pick" --> and navigate to the location you extracted the drivers to.
This is most likely a driver issue. I doubt your phone is messed up. You'll get it eventually. I also had a hard time getting my Captivate to connect. After uninstalling and reinstalling my drivers (more than once) it finally worked. One last thing, for now. When you uninstall drivers, also make sure you don't have any installed under your program list. As in, Control Panel --> Uninstall a program. Good luck!
climber1872000 said:
Have you tried using a different USB outlet on your computer? I had this same issue when I plugged my phone up using the USB outlet on the front of my computer then when I tried the one on the back of my computer it worked just fine.
Click to expand...
Click to collapse
A friend of mine, who bought the same phone on the same day as I did, plugged in his phone on my computer using my cable to the same port my phone was connected, and he did get the "USB Connected" notification on his phone
govgeek said:
Are you running a launcher app? I use launcher pro and can't connect until I change back to the default launcher with home switcher and launch it.
Click to expand...
Click to collapse
No, i'm using the default launcher that comes with the Captivate
jgchaval said:
Hi everyone,
I'm having issues connecting my Samsung Captivate to my computer. For about a week, it worked fine, I was able to transfer files to my phone but recently I noticed that the "USB connected" notification is not showing on the phone when plugged in to the computer.
Now, when I plug in my phone to the computer it just charges but doesn't comunicate with my computer. A friend of mine bought the same phone right after I did and he gets the "USB connected" connected when he plugs in his.
I tried using his USB cable but again, the phone is not recognized by Windows nor the phone detects it is connected to the computer. I've tried installing several USB drivers that I've come across on several forums, but nothing. I even downloaded and updated Kies to the latest version, but still nothing.
My phone is unlocked and NOT rooted, and I'm using Windows 7 x64. I've set the USB Settings to Mass Storage, even to Ask on Connection, but it doesn't ask anything when I connect the phone to a USB on my computer.
Sometimes Windows knows there is a device connected but says it couldn't recognize it.
I already did a factory reset, but the issue was not solved. I've tried connecting it to other computers, but still hasn't been able to connect my phone correctly.
What could it be?
Thanks!
Click to expand...
Click to collapse
I just did the new AT&T update and mine is now having this problem. I have to manually go into manage applications > usb settings > mass storage to get it to work now
a.n said:
First off, think back. If it worked for a week and then suddenly stopped, what changed? Maybe you updated something on Windows or changed something on your phone. There's a reason it just stopped.
You can try using a free program called USBDeview.
It might do the trick for you and help you install the correct drivers. I'm thinking you no longer have them.
1. Download USBDeview (link is above)
2. Plug your phone in and open the program. Find all the HTC drivers-delete them
3. Unplug your phone and plug it back in
4. The correct drivers should install automatically
You can also try updating the drivers manually.
Galaxy S drivers (These are for ADB, but will work fine)
1. Click the Start Menu on your computer and right click "Computer"
2. Choose "Manage" --> it will ask you to continue --> "Device Manager"
3. Plug you phone in and look for it to pop up, probably under Portable Devices
4. Right click --> "Properties" --> "Update Driver" --> "Browse" --> "Let Me Pick" --> and navigate to the location you extracted the drivers to.
This is most likely a driver issue. I doubt your phone is messed up. You'll get it eventually. I also had a hard time getting my Captivate to connect. After uninstalling and reinstalling my drivers (more than once) it finally worked. One last thing, for now. When you uninstall drivers, also make sure you don't have any installed under your program list. As in, Control Panel --> Uninstall a program. Good luck!
Click to expand...
Click to collapse
I did all that yesterday, but the device ain't listed in the USBDeview nor it shows up in the Device Manager
did you finally fix this problem? because I'm having the same issue here
Same here. It was working fine, I could connect to Kies, transfer music in Media mode and see both sd drives in Mass Storage mode. Then I rooted today and now I get nothing. In anything but Kies mode I get the Windows Bong of Recognition, but still not visible in Explorer. Also, my Home screen stays active instead of switching to the USB animation like it did before. I know this can't be a consequence of rooting the phone, can it?
EDIT: More weirdness, with the phone connected in Mass Storage mode if I look at My Computer in Explorer there are 2 extra drives showing, but they are greyed out and when I click on either of them it asks me to insert a card as the drive is empty. WTF???
UPDATE: I unrooted and managed to get my USB connection back to working. It is still a bit flaky as I sometimes have to disconnect/reconnect several times before it works, but at least it now works although it sometimes loses sync in the middle of transferring a file. Can't imagine why simply rooting the phone would cause the loss of USB connectivity. I am going to reroot and see if it occurs again.
OK, a rerooted the phone and this problem is now back. I have no problem connecting while in debugging mode. I installed OCD (non-Market apps mod) and when I turn off debugging and connect I get the Windows bong and see the USB icon in the Notification bar, but the MTP screen never comes up and I can't see the phone in Explorer (Mass Storage mode) or in WMP (Media mode). Kies can;t see it in that mode, either. I really don't want to have to unroot every time I want to look at the phone contents. Any ideas? PLEASE!
I'm having a similar problem - I installed the Perception ROM and immediately afterwards I can't see the USB connection at all from my PC or my Mac. The USB icon on the phone does not come up either.
I'm trying to get my hands on a different cable - but the weird thing is when I plug the USB into my computer the phone starts charging for like half a second and then stops.
This is really annoying. I tried changing the rom to Cognition 3.02 but that didn't change anything.
There are a few topics on this here on the forum - I would recommend the following:
How are you rooting your phones? Nobody has said exactly how they are doing this. Are you using recommended rooting methods? Or are you using some app found on the market?
Make sure you have USB De-Bugging is turned on.
Make sure you have it listed as ask on connection.
For those who can see the drives in Windows...
Plug in your phone and then pull down your notification bar and click on the USB connected message. It will give you an option there to mount your SDCard(s) to Windows allowing you to transfer files.
Kies is junk - I'd recommend uninstalling it as it seems to cause more issues then it solves.
Use the drivers I have posted in the Q&A section (these are the ones that are linked in Design Gears Odin 1 Click Back to Stock post btw) - but I would try and COMPLETELY removing the pre-existing drivers before installing the new ones.
Make sure the USB Cable is plugged into the back USB port that is directly on your motherboard - this will ensure it's not a computer/hardware related issue.
I know of one user who had to go through his computer and manually remove all remnants of other drivers. I have my phone connected to both a Windows XP 32bit and a Windows 764bit systems and have been lucky to not have any USB issues.
If none of that works - I'd suggest taking it to your nearest AT&T/Rodgers shop and see if they can get the phone to connect (make sure it's back to stock!). If not they should warranty replace the device.
avgjoegeek said:
There are a few topics on this here on the forum - I would recommend the following:
How are you rooting your phones? Nobody has said exactly how they are doing this. Are you using recommended rooting methods? Or are you using some app found on the market?
Make sure you have USB De-Bugging is turned on.
Make sure you have it listed as ask on connection.
For those who can see the drives in Windows...
Plug in your phone and then pull down your notification bar and click on the USB connected message. It will give you an option there to mount your SDCard(s) to Windows allowing you to transfer files.
Kies is junk - I'd recommend uninstalling it as it seems to cause more issues then it solves.
Use the drivers I have posted in the Q&A section (these are the ones that are linked in Design Gears Odin 1 Click Back to Stock post btw) - but I would try and COMPLETELY removing the pre-existing drivers before installing the new ones.
Make sure the USB Cable is plugged into the back USB port that is directly on your motherboard - this will ensure it's not a computer/hardware related issue.
I know of one user who had to go through his computer and manually remove all remnants of other drivers. I have my phone connected to both a Windows XP 32bit and a Windows 764bit systems and have been lucky to not have any USB issues.
If none of that works - I'd suggest taking it to your nearest AT&T/Rodgers shop and see if they can get the phone to connect (make sure it's back to stock!). If not they should warranty replace the device.
Click to expand...
Click to collapse
This isn't my first rodeo... But to answer your questions:
I used the rooting method posted in XDA forums - the one-click rooting.
I've used the drivers included in the xda-forum. Not the kies software.
The only thing that changed was the loading of a new custom rom. The cable works (confirmed on my friend's phone). I can't get odin to restore back to stock because I can't get the computer to recognize the phone in either normal or in download mode. I've restored to stock using the jh7 in the stickied q&a thread
I don't think it's a hardware issue either - I think it's software-based. I'm going to try to take it to an at&t store today at lunch to see what they say.
I also have that problem only I noticed it when I cleared the dalvik cache. It messed up the auto rotate so it was always sideways and now I have no connectivity to the PC. Let me know how ATT treats you.
greeto4 said:
I also have that problem only I noticed it when I cleared the dalvik cache. It messed up the auto rotate so it was always sideways and now I have no connectivity to the PC. Let me know how ATT treats you.
Click to expand...
Click to collapse
What rom are you on
Hello everyone,
I am trying to transfer files from my computer (Windows 10) to my phone (Android 5.0.2), but it only says "preparing to copy" and then freezes there. Sometimes canceling the copy is enough, but sometimes it freezes the explorer so I have to disconnect the USB plug.
I tried with PC companion (which redirects to windows explorer), Media Go, Total commander. No success.
I saw that many people had/have this problem but I couldn't find any helpful answer though... So if someone experienced this and managed to get through, please help. I'm really desperate.
Thanks
Try transferring over Bluetooth see if that works
Sent from my Xperia Z using XDA Free mobile app
Bluetooth works. But I am trying to transfer through USB cable since I don't have bluetooth on my computer.
well, thanks to windows 10 for that :] If you would read they ToU you would know that they probably make copy of this data and send them to microsoft servers, that why its dont work :]
But seriously. go to device manager and check if your xperia is visible as device(in usb controllers and other devices)
If you dont see anything, keep this device manager window active unplug phone, plug it again and see the difference on list.
Then select this device, uninstall it from your PC, unplug your phone, and plug it again.
After next time you plug it all drivers would install again and try to transfer files again.
If this dont help check your phone with scan tool that windows have in proprietaries.
Also, because of flaps in our xz, I very often use WiFi transfer, its almost the same speed.
Plug your device, open Settings menu on phone , go to "Xperia connection" at the end you have "connection via USB"
There you have "associate with PC" click it and then go to your PC, My computer select phone(right click) and from list choose "configure network" wait for configuration(sometimes its stop responding, just leave it for few minutes).
After that you can connect to your phone just by clicking that "connect to Computer" in xperia settings.
You have access just like via USB to phone and SD card, speed is almost the same.
Akinaro said:
well, thanks to windows 10 for that :] If you would read they ToU you would know that they probably make copy of this data and send them to microsoft servers, that why its dont work :]
But seriously. go to device manager and check if your xperia is visible as device(in usb controllers and other devices)
If you dont see anything, keep this device manager window active unplug phone, plug it again and see the difference on list.
Then select this device, uninstall it from your PC, unplug your phone, and plug it again.
After next time you plug it all drivers would install again and try to transfer files again.
If this dont help check your phone with scan tool that windows have in proprietaries.
Also, because of flaps in our xz, I very often use WiFi transfer, its almost the same speed.
Plug your device, open Settings menu on phone , go to "Xperia connection" at the end you have "connection via USB"
There you have "associate with PC" click it and then go to your PC, My computer select phone(right click) and from list choose "configure network" wait for configuration(sometimes its stop responding, just leave it for few minutes).
After that you can connect to your phone just by clicking that "connect to Computer" in xperia settings.
You have access just like via USB to phone and SD card, speed is almost the same.
Click to expand...
Click to collapse
Hey Akinaro,
Thanks for your detailed response.
My device is visible as a device, I can access SD card and internal memory, well no problem there, I already uninstalled/reinstalled the drivers.
I also tried other USB ports but no success. Tried to use the cable with other phones, it works fine. Tried another computer, same problem.
When I try to plug the phone to rear usb port, copy works for like, one or files, then freezes. It then says that the device has been disconnected. Seems like the usb connection kinda drops...
I will try to associate with PC and let you know.