I have used the RSD to flash it but my droid remains at the power up status.The animation of a flashy vedio display card(I don't know how to call it.) plays again and again.The RSD said "Please manually power up this phone."If I try to enter the recovery mode my phone will display a broken robot for a long time then reboot by itself.What can I do now?
Hold Power and Volume Down(For like 5-10 Seconds) and it will shut off, then go to the boot loader(Power + Volume Up + Volume Down) and choose recovery and Clear Cache which should fix it. If not you might have to Factory Wipe the phone.
I just tried to install CM 10.1.3 on my Motorola Atrix HD.
I forgot to wipe data and cache before installing the ROM, and now it is stuck in the boot animation.
When I press the power and volume keys down together, it takes my phone to a black screen, and when I press them again on the black screen it gives me a brief menu that says
"Normal power up"
"Recovery"
"AP Fastboot"
"Factory"
and another one I can't recall.
This screen times out in about 3 seconds. and regardless of which item from the menu I select, it still shows my boot logo, then the CM animation. I cant boot into fastboot or recovery, and I can't find anything good online to help me.
Help! What do I do?
Hi. There's a catch about the bootloader mode (the menu you're describing). You have to press vol down to scroll down to Recovery, and then press vol up to select it. Pretty dumb IMO but that's how it is.
If you're completely sure you can't get to recovery using this method, you could try going into download mode and factory reset through fastboot:
Here's the guide to get fastboot working:
http://forum.xda-developers.com/showthread.php?t=2226527
To go into download mode, shut down the phone completely, hold down the power button and volume down buttons. Then let go of the power button while still holding down the volume button and it should boot to fastboot (download) mode. The connect usb cable to your pc.
You can do a factory reset (format data and cache partitions) using fastboot -w.
Btw, is there any particular reason for going CM10? CM11 is just so much better now, nightlies are pretty good (12/20 has been rock solid for me, even with ART enabled).
Good luck!
Hello. I have a razr I and decided to unlock the bootloader. I tried the button combination power + volume down several times, but the phone just powers up normally (actually rhe screen flashes for a second, but doesn't go into fastboot mode. I trided using adb reboot fastboot but the device just reboots. What can I do about it?
NVM, just did it by fastboot reboot bootloader...
Ok, one more thing. It seems my device ignores the key combo, but I was still able to get into fastboot mode by using adb. However, I have tried to flash a custom recovery with no success.
I tred using the supplied installer and after rebooting I get to the open robot screen with the red exclamation mark. Then, after holding some keys (not sure if power or power + volume down I get into recovery, but it's still the stock android recovery. Then I tried flashing the recovery image from fastboot mode. It sait the recovery was flashed, but still cannot boot into recovery. What's wrong with my phone?
axlastro said:
Hello. I have a razr I and decided to unlock the bootloader. I tried the button combination power + volume down several times, but the phone just powers up normally (actually rhe screen flashes for a second, but doesn't go into fastboot mode. I trided using adb reboot fastboot but the device just reboots. What can I do about it?
NVM, just did it by fastboot reboot bootloader...
Click to expand...
Click to collapse
Just incase you need to do it in the future:
Hold volume down, then hold the power button. When it begins to vibrate release the power button and keep the volume down button pressed until you get into fastboot.
AGISCI said:
Just incase you need to do it in the future:
Hold volume down, then hold the power button. When it begins to vibrate release the power button and keep the volume down button pressed until you get into fastboot.
Click to expand...
Click to collapse
Alright. So how about the never appearing CWM recovery?
Hi guys,
I just unlocked my phone and tried entering recovery mode, but it won't work, it just boots normal.
Pressing 3 sec VolDown + Power
Pressing VolDown, then VolUp.
Android Logo appears and after a few seconds phone boots just normal.
Tried it now a thousand times.
Any suggestions?
Moto G, Android 4.4.4, Kernel [email protected]#1, system version 210.12.40.falcon_umts.Retail.en.DE, BuildNo: KXB21.14-L1.40
Timjim01 said:
Hi guys,
I just unlocked my phone and tried entering recovery mode, but it won't work, it just boots normal.
Pressing 3 sec VolDown + Power
Pressing VolDown, then VolUp.
Android Logo appears and after a few seconds phone boots just normal.
Tried it now a thousand times.
Any suggestions?
Moto G, Android 4.4.4, Kernel [email protected]#1, system version 210.12.40.falcon_umts.Retail.en.DE, BuildNo: KXB21.14-L1.40
Click to expand...
Click to collapse
Shutdown your phone and after its completely down Press "Volume Down key +Power Key" for 5 Sec then release, As simple as that
lols21.10 said:
Shutdown your phone and after its completely down Press "Volume Down key +Power Key" for 5 Sec then release, As simple as that
Click to expand...
Click to collapse
That is not helpful at all. I know how to boot to boot menu. I cannot enter recovery mode!
Timjim01 said:
That is not helpful at all. I know how to boot to boot menu. I cannot enter recovery mode!
Click to expand...
Click to collapse
Ohhh srry flash stock recovery
I have a slightly different problem, I try to get into Recovery but in Recovery no options show up at all, all I see is the Android robot laying down with the '!' mark, with no options, sometimes it also says 'No command' with the Android.
Boot menu before you select Recovery works fine. (I'm completely stock)
jay2the1 said:
I have a slightly different problem, I try to get into Recovery but in Recovery no options show up at all, all I see is the Android robot laying down with the '!' mark, with no options, sometimes it also says 'No command' with the Android.
Boot menu before you select Recovery works fine. (I'm completely stock)
Click to expand...
Click to collapse
Similar issue here: I unloacked the bootloader, and can't enter recovery mode of the stock Motorola recovery. Recovery mode stops with same picture as described above, robot lying on it's back. Does Motorola prevent loading the stock recovery when the phone is unlocked? I did not try to enter recovery with locked phone by the way, so can't tell if stock recovery didn't work in the first place.
Hi
That's the correct behaviour. Press volume UP+power, release power then volume UP, that v then shows the menu in recovery
Sent from my XT1068 using XDA Free mobile app
Finally I found correct way to do that
To be clear I will start from beginning
1. Power off device
2. Press Volume DOWN + Power buttons for 3 to 5 sec then release Volume DOWN and then Power
3. Now select Recovery. Android with /!\ will be shown.
[Lollipop]
4. Press Power and while pressing it tap Volume Up
[KitKat]
4. Press Volume UP for 5 sec while pressing Volume UP press Power button.
(don't release Volume UP before pressing Power)
You are now in stock Recovery
bhavin192 said:
3. Now select Recovery. Android with /!\ will be shown.
Click to expand...
Click to collapse
Thanks, for the explanation! Only remaining odd thing: my device reboots to system OS instead of recovery when selecting recovery in the bootloader. I'm only able to go into recovery by:
Code:
fastboot boot recovery
I have the same exact problem where I could not go to recovery mode.
When in fastboot screen, I select Recovery by pressing volume up button and instead of phone going to recovery mode, my phone restarts to lands to lock screen.
When you say that you are able to go to recovery by -
Code:
fastboot boot recovery
What does it mean?
Which directory I have to be in to execute this command?
jheller said:
Thanks, for the explanation! Only remaining odd thing: my device reboots to system OS instead of recovery when selecting recovery in the bootloader. I'm only able to go into recovery by:
Code:
fastboot boot recovery
Click to expand...
Click to collapse
My moto g is having the same problem, let me try the method you mentioned down here
My moto g is having the same problem, let me try the method you mentioned down here.
It is really odd though that you have to follow steps which are not mentioned in fastboot mode to get to the recovery mode.
bhavin192 said:
Finally I found correct way to do that
To be clear I will start from beginning
1. Power off device
2. Press Volume DOWN + Power buttons for 3 to 5 sec then release Volume DOWN and then Power
3. Now select Recovery. Android with /!\ will be shown.
4. Press Volume UP for 5 sec while pressing Volume UP press Power button.
(don't release Volume UP before pressing Power)
You are now in stock Recovery
Click to expand...
Click to collapse
Timjim01 said:
Hi guys,
I just unlocked my phone and tried entering recovery mode, but it won't work, it just boots normal.
Pressing 3 sec VolDown + Power
Pressing VolDown, then VolUp.
Android Logo appears and after a few seconds phone boots just normal.
Tried it now a thousand times.
Any suggestions?
Moto G, Android 4.4.4, Kernel [email protected]#1, system version 210.12.40.falcon_umts.Retail.en.DE, BuildNo: KXB21.14-L1.40
Click to expand...
Click to collapse
Press volume up for 10 seconds and then just tap power button once and release both
My phone won't go past the android with ! in a triangle. I have tried pressing the up button for 15 secs and then the power button but nothing happens.
I have a Consumer Cellular XT1064 with unlocked bootloader which I flashed to retail Rom. Then I was able to go to stock recovery normally with pressing up 15sec and power, and manually flash the 5.0 OTA update. Now a few weeks later when I want to flash the second OTA update, I can't go into recovery.
Any help please.
Trekker56 said:
My phone won't go past the android with ! in a triangle. I have tried pressing the up button for 15 secs and then the power button but nothing happens.
I have a Consumer Cellular XT1064 with unlocked bootloader which I flashed to retail Rom. Then I was able to go to stock recovery normally with pressing up 15sec and power, and manually flash the 5.0 OTA update. Now a few weeks later when I want to flash the second OTA update, I can't go into recovery.
Any help please.
Click to expand...
Click to collapse
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/99808/p/30%2C6720%2C9151/reg/1229018/kw/cache%20partition try this
Stock img?
I've been having this issue too. Can someone post the recovery.img for the latest stock recovery? I want to try and flash it and see if I can get into recovery then.
The key combination to enter recovery at the distressed android screen has changed for Lollipop!
Hold the power button for a few secs and tap the up key!
Hit thanks if this helped
Trekker56 said:
The key combination to enter recovery at the distressed android screen has changed for Lollipop!
Hold the power button for a few secs and tap the up key!
Hit thanks if this helped
Click to expand...
Click to collapse
You are the man! Thank you(I also hit the thanks button).
Trekker56 said:
The key combination to enter recovery at the distressed android screen has changed for Lollipop!
Hold the power button for a few secs and tap the up key!
Hit thanks if this helped
Click to expand...
Click to collapse
This key combination does not work for me
angelgzg said:
This key combination does not work for me
Click to expand...
Click to collapse
Try holding the volume up and tapping the power button at the /!\ Android screen
Trekker56 said:
The key combination to enter recovery at the distressed android screen has changed for Lollipop!
Hold the power button for a few secs and tap the up key!
Click to expand...
Click to collapse
Worked on the first attempt. This is the correct key combination in the Android 5.0 build.
My daughters Motorola X 2nd Gen (XT1095) seems to be locked. When you touch the screen all that shows is the time and a padlock. If you try and slide the padlock up, down or to the left or right the date shows at the top and the battery shows but it will not proceed.
Can anyone tell me what may be happening and how to fix it?
Thanks
I would first hold down the power until it turns off. It sounds like a restart is in order
Red_81 said:
I would first hold down the power until it turns off. It sounds like a restart is in order
Click to expand...
Click to collapse
Restarted it several times, results are the same, still locked.
Sorry to hear that. I didn't see it in your post so I started with square one troubleshooting.
How about rebooting to recovery and trying to wipe the cache?
Red_81 said:
Sorry to hear that. I didn't see it in your post so I started with square one troubleshooting.
How about rebooting to recovery and trying to wipe the cache?
Click to expand...
Click to collapse
Sorry, should have said that. How do I boot into recovery and wipe cache?
Thanks
1. Power off the phone
2. Hold volume down and press the power button
3. Press volume down until you get to the word recovery then press volume up
4. When the little android is laying down, press the power button and tap volume up.
5. Use volume down to get to wipe cache partition and press power
Red_81 said:
1. Power off the phone
2. Hold volume down and press the power button
3. Press volume down until you get to the word recovery then press volume up
4. When the little android is laying down, press the power button and tap volume up.
5. Use volume down to get to wipe cache partition and press power
Click to expand...
Click to collapse
Did all that and still same, I noticed that when it comes up in the boot mode (holding down the vol button) that one of the items listed says "Device is LOCKED. Status Code: 0
billsteiner said:
Did all that and still same, I noticed that when it comes up in the boot mode (holding down the vol button) that one of the items listed says "Device is LOCKED. Status Code: 0
Click to expand...
Click to collapse
That just means the bootloader is locked. It has nothing to do with the problem you're having. Try a factory reset if wiping caches didn't work.
Sent from my XT1095 using Tapatalk
Get the phone to the bootloader. Open a cmd on your computer and type MFASTBOOT ERASE USERDATA. that'll factory reset it for you.
matt99017d said:
Get the phone to the bootloader. Open a cmd on your computer and type MFASTBOOT ERASE USERDATA. that'll factory reset it for you.
Click to expand...
Click to collapse
Finally got it to factory reset but still problems. Called Motorola and they are doing a replacement. Thanks for your help it was really appreciated.