[Q] My droid 4 doesn't work! - Motorola Droid 4

I have used the RSD to flash it but my droid remains at the power up status.The animation of a flashy vedio display card(I don't know how to call it.) plays again and again.The RSD said "Please manually power up this phone."If I try to enter the recovery mode my phone will display a broken robot for a long time then reboot by itself.What can I do now?

Hold Power and Volume Down(For like 5-10 Seconds) and it will shut off, then go to the boot loader(Power + Volume Up + Volume Down) and choose recovery and Clear Cache which should fix it. If not you might have to Factory Wipe the phone.

Related

Bootanimation loop

Hello everyone.
I got a new Galaxy Ace S5830i today.
I rooted it and installed CWM (http://forum.xda-developers.com/showthread.php?t=1552792).
After that I did install Retribution beta 4 (http://forum.xda-developers.com/showthread.php?t=1806471).
Then after rebooting I ended up getting a boot animation loop and neither the recovery mode would work nor the download mode.
Could anyone of you please help me? I feel very uncomfortable with a brick in my pocket. :x
I'd be surprised if neither were working, particularly if you are getting as far as the boot animation.
To clarify, to enter recovery mode: Switch off your phone (pull out the battery and re-insert if its looping and the power button won't work), hold down power button AND home/rectangular button AND volume up button. When you see the Samsumg GT-S5830i logo, let go of the power button but continue to hold down the home and volume up buttons for around 5 seconds then let go of everything. Recovery console should appear on screen.
To enter download mode: Switch off your phone, hold down power button AND volume up button AND volume down button. Warning about custom OS's should appear, followed by download mode after pressing volume up again. If this doesn't work try taking out battery, sim card and SD card, connecting USB lead (screen will be completely powered off) and then trying the key combination.

[Q] HELP! Atrix HD Stuck in CM 10 Boot Animation

I just tried to install CM 10.1.3 on my Motorola Atrix HD.
I forgot to wipe data and cache before installing the ROM, and now it is stuck in the boot animation.
When I press the power and volume keys down together, it takes my phone to a black screen, and when I press them again on the black screen it gives me a brief menu that says
"Normal power up"
"Recovery"
"AP Fastboot"
"Factory"
and another one I can't recall.
This screen times out in about 3 seconds. and regardless of which item from the menu I select, it still shows my boot logo, then the CM animation. I cant boot into fastboot or recovery, and I can't find anything good online to help me.
Help! What do I do?
Hi. There's a catch about the bootloader mode (the menu you're describing). You have to press vol down to scroll down to Recovery, and then press vol up to select it. Pretty dumb IMO but that's how it is.
If you're completely sure you can't get to recovery using this method, you could try going into download mode and factory reset through fastboot:
Here's the guide to get fastboot working:
http://forum.xda-developers.com/showthread.php?t=2226527
To go into download mode, shut down the phone completely, hold down the power button and volume down buttons. Then let go of the power button while still holding down the volume button and it should boot to fastboot (download) mode. The connect usb cable to your pc.
You can do a factory reset (format data and cache partitions) using fastboot -w.
Btw, is there any particular reason for going CM10? CM11 is just so much better now, nightlies are pretty good (12/20 has been rock solid for me, even with ART enabled).
Good luck!

[Q] Startup Problem

My Motorola Atrix Hd won't boot up every time I turn the phone on the m logo shows up then goes to the recovery screen that have a red triangle their and stay their for a wild then goes back to the m logo how do i fix the problem
If it keeps going to recovery, you could try wiping cache and Dalvik to see of that happens. If this doesn't help, you may need to wipe the data partition too. If that doesn't help, you may have to re-flash the stock ROM.
audit13 said:
If it keeps going to recovery, you could try wiping cache and Dalvik to see of that happens. If this doesn't help, you may need to wipe the data partition too. If that doesn't help, you may have to re-flash the stock ROM.
Click to expand...
Click to collapse
how do i wipe the data partition
When you boot your phone, it goes right to the dead android all the time? If it does, that is recovery mode. I think you press the volume up key, select the option to wipe data, and reboot.
Special boot modes
Recovery: Hold Volume Down & Power simultaneously.
Bootloader: Hold Volume Up Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to bootloader and then use Volume Up to select.
Fastboot: Hold Volume Up Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to bootloader and then use Volume Up to select.
audit13 said:
When you boot your phone, it goes right to the dead android all the time? If it does, that is recovery mode. I think you press the volume up key, select the option to wipe data, and reboot.
Special boot modes
Recovery: Hold Volume Down & Power simultaneously.
Bootloader: Hold Volume Up Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to bootloader and then use Volume Up to select.
Fastboot: Hold Volume Up Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to bootloader and then use Volume Up to select.
Click to expand...
Click to collapse
i did that but the phone is still doing the same thing
What ROM was your phone running? Does it have an unlocked bootloader? Did this happen after you did something to the ROM?
I am also have startup problems.
I manually restarted my phone and it fell into a black screen. No logo motorola. I made ​​all [power + volume (+, -)] => My phone booted into normal.
The cause of this problem?
Since I have a problem I did not start that way anymore: Power -> Reboot
Instead I just power off.
audit13 said:
What ROM was your phone running? Does it have an unlocked bootloader? Did this happen after you did something to the ROM?
Click to expand...
Click to collapse
i wasn't using a rom i was actually trying to install one, and the bootloader is locked
Try flashing a rom using rsd lite.

NEEDING SOME HELP HERE!!! :c

Well, i tried to install nfs most wanted, i was downloading the data of the game; it finished, and suddenly my phone reboots itself, and now it get stuck in the screen "warning bootloader unlocked", it reboots and reboots, it doest pass that screen, does someone can help me?? :C i don 't know what to do.
This is for STANDARD Recovery - How do I reset my device?
In the unlikely event that your device becomes unresponsive, frozen, blank or black screen, or will not respond to the power button, you can perform a force restart or reboot on the device by following the steps below.
Press and hold the Power button for 7 - 10 seconds, the device will restart and go through the boot-up sequence.
Notes:
The forced restart or reboot will not delete any Data on your phone.
If completing the 7-10 second Reset does not recover normal functionality of the device, then press and hold the Power Button for a full 120 seconds while connected to a charger.
Factory Data Reset is a tool used to remove everything that was imported, added or installed on the device. Keep in mind, when using this feature everything is deleted.
To reset your device:
1. Touch Image
2. Touch Settings
3. Touch Backup & reset
4. Touch Factory Data Reset
5. Touch Reset Phone
External Reset
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
When using this feature; everything is deleted from the device.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to select this option
8. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
10. The device will reboot and start the normal power up sequence
ok, but if i can't enter the recovery?
ok, but if i can't enter the recovery?
wone96 said:
ok, but if i can't enter the recovery?
Click to expand...
Click to collapse
press and hold the power button till phone powers downs (vibrates) as screen goes off,at same time release power and press volume down (only this) count 1,2 and press and release power key again twice (still keep holding volume down) - should boot to bootloader

Is my phone bricked?

I just flashed cm12 on my moto g 2014 (XT1068)... then i flashed GApps... The thing is as soon as i rebooted system.. blue icon of cm started blinking... and it is blinking for the past one hour... When i hold the power button to switch it off.. it reboots instantly and starts blinking again.. What should i do and what is my mistake
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
For more questions or to have full access please register an account on XDA forum.
Stand by
Good luck
XDA Visitor said:
I just flashed cm12 on my moto g 2014 (XT1068)... then i flashed GApps... The thing is as soon as i rebooted system.. blue icon of cm started blinking... and it is blinking for the past one hour... When i hold the power button to switch it off.. it reboots instantly and starts blinking again.. What should i do and what is my mistake
Click to expand...
Click to collapse
Not bricked , either stuck in boot loop or Hanging ( a soft brick) both ARE fixable
custom recovery? boot to this and wipe ALL caches / data / user / dalvik etc and then try to boot ROM again
How do I reset my device?
In the unlikely event that your device becomes unresponsive, frozen, blank or black screen, or will not respond to the power button, you can perform a force restart or reboot on the device by following the steps below.
Press and hold the Power button for 7 - 10 seconds, the device will restart and go through the boot-up sequence.
Notes:
The forced restart or reboot will not delete any Data on your phone.
If completing the 7-10 second Reset does not recover normal functionality of the device, then press and hold the Power Button for a full 120 seconds while connected to a charger.
Factory Data Reset is a tool used to remove everything that was imported, added or installed on the device. Keep in mind, when using this feature everything is deleted.
To reset your device:
1. Touch Image
2. Touch Settings
3. Touch Backup & reset
4. Touch Factory Data Reset
5. Touch Reset Phone
External Reset (KitKat)
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
When using this feature; everything is deleted from the device.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to select this option
8. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
10. The device will reboot and start the normal power up sequence
External Reset (Lollipop)
1. With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on. You will see the word "Start" with an arrow around it.
2. Press the Volume Down button twice to highlight "Recovery mode"
3. Press the Power button to restart into Recovery mode. You'll see an image of an Android robot with a red exclamation mark and the words "No command."
4. While holding down the Power button, press the Volume Up button.
5. Use the volume buttons to scroll to "wipe data/factory reset" and press the Power button to select it.
6. Scroll down to "Yes - erase all user data" and press the Power button to select it.
Well hold the power button till the screen goes black .. Now don't leave the power button and press the volume down the volume button ! Now leave the volume down button and then power button.. You'll boot in to the bootloader ! Now boot into the recovery ! And flash some other ROM !
Or flash the same ROM again .. This time clear internal data , system , dalvik cache , and then flash the ROM ! Hope this works !

Categories

Resources