Database Develop

Help!!!

I Have the new cyanogen rom 4.0.2 installed. For some reason my phone is just stuck on the android logo. I need help because i'm sort of new with this rooting business. Somebody please help because I'm freaking out right now.

rjammoo said:
I Have the new cyanogen rom 4.0.2 installed. For some reason my phone is just stuck on the android logo. I need help because i'm sort of new with this rooting business. Somebody please help because I'm freaking out right now.
Click to expand...
Click to collapse
Is it stuck at the android screen or is it boot looping? And don't freak.. rooting, if you've done some research isn't too bad.

It was stuck on the android screen. But I wiped the data and installed a fresh copy of cyanogen mod.

So you got past the android logo?

Yes, now I did because I wiped everything and then installed a new copy. So far it seems to be working. Fingers crossed.

Congrats my friend! Enjoy having root.. If you're interested in running hero.. lemme know! I'm running jacx1.5r2 and it's just speedy as all get out. anyway have fun!

Thanks a lot. I have a question is it better to run the cyanogen mod or the jacx rom?

That's a question that only you have an answer for. I don't personally like the xROM but that's because I've tasted Hero and can't let it go When it comes to the different roms if you really want to know how they run, flash and test! This is going to be the best way for you to see the differences between the roms. (also check the rom's change logs. they have information about updates and whatnot)

Last question, do I need to wipe the phone clean before going to different rom or just flash the rom?

Most of the non-hero roms you can flash without wiping. But if you run into bootloops, then you'll need to wipe.

Alright, thanks a lot for the help.

rjammoo said:
Alright, thanks a lot for the help.
Click to expand...
Click to collapse
No problem man

If you plan on trying any Hero roms makes sure you update the new Radio and SPL. And please god make sure you do the RADIO FIRST then the SPL. If you don't do it that way you will have a $400 paperweight.
And my opinion, stick with non-Hero for now. Not saying they aren't good but I have tested all of them for a day or 2 each and even with a class 6 sd card and trying different swap values and sizes they always have some lag. If you are a casual user then I suppose you would be fine, but I have a business to run and cannot afford to miss any calls or texts. I need the web to run and be able to go home without and lag, or to get a quick email out in under a minute. Some people here say its just as fast but I have to disagree for the most part. When the dev's can get these new sets of hero rom's to be fully stable/optimized maybe I will try again but if you rely on your phone like I do then you may want to stick with cyan/xrom/jf for now.

The Ultimate Noob Guide-Need Help Please

Hi guys,
I recently bought a Nook Color and i want to root it. I am hearing things about Autonooter and putting an image on my micro SD card. Personally i just want the best option to root my Nook, i want to overclock it aswell .
Really sorry if someone has already posted a thread like this, i tried searching for one.
I havent opened my Nook Color yet so guessing the software would be 1.0.0 so how would i root it to 1.1.1 and also stop OTA and install a overclocking software.
Thanks, XDA is amazing, recently rooted my Notion Ink Adam

I too would be interested in such a thing. There is information all over the place, but most seems to be geared toward people that understand the "lingo" and such...

I agree

reading MD5 hash
I'm pretty new to this- I have my NK running 1.0.1 using autonooter and want to update to 1.1. I think I've got a grip on using ClockworkMod, but in the instructions for downloading the 1.1 kernel, it says to "check the MD5 hash"- how do I get this info from the downloaded ZIP file? I don't want to even try and do the update without making sure the download is not corrupt.
Thanks!

rcsrich said:
I'm pretty new to this- I have my NK running 1.0.1 using autonooter and want to update to 1.1. I think I've got a grip on using ClockworkMod, but in the instructions for downloading the 1.1 kernel, it says to "check the MD5 hash"- how do I get this info from the downloaded ZIP file? I don't want to even try and do the update without making sure the download is not corrupt.
Thanks!
Click to expand...
Click to collapse
http://helpdeskgeek.com/how-to/check-md5sum-in-windows-7/
I have to say though, to the OP, that reading through all the guides (and some comments) in the dev forums would be the best because you'll learn all the ins n outs. Having a noob guide is fine but it's fun searching for the info yourself and you'll learn/remember a lot more about your device. having a noob guide that is not comprehensive enough just promotes needless questions when the info is all over the place elsewhere.

Thanks for the link superkevx! Additionally, is there any way to do the check on the Nook itself? I downloaded it using the stock browser & can pull the SD card and check it on my 'puter, but it would be nice to be able to just do it locally.
I agree with you comment about the noob guide- I've learned so much trolling the dev forums...

i do try to find everything its just some things i dont get:
like clockworkmod, i think its to do with disabling OTA but im not sure
which is better,autonooter or installing on SD
,if you could answer these questions i would be really grateful thanks

From one noob to another...
Patrikc8 said:
i do try to find everything its just some things i dont get:
like clockworkmod, i think its to do with disabling OTA but im not sure
which is better,autonooter or installing on SD
,if you could answer these questions i would be really grateful thanks
Click to expand...
Click to collapse
Patrikc8- from my experience (have ROM Manager & Clockworkmod installed in prep for 1.1 update), Clockwork mod is used for making system backups and doing system restores (including installs of custom ROM's)
As far as the SD vs autonooter- installing to the SD means that you typically don't touch the original system files on the Nook itself- good for trying out a ROM that you are interested in but not sure you want to keep. There may be a performance hit though because you're constantly reading from the potentially slower SD media (correct me if I'm wrong on that anybody). I used autonooter to root my Nook and it has worked great since- it is apparently a very easy way to root and I had no trouble doing it.

Aha!
rcsrich said:
Thanks for the link superkevx! Additionally, is there any way to do the check on the Nook itself? I downloaded it using the stock browser & can pull the SD card and check it on my 'puter, but it would be nice to be able to just do it locally.
I agree with you comment about the noob guide- I've learned so much trolling the dev forums...
Click to expand...
Click to collapse
For what it's worth- did a little investigating & you can use Astro file manager to get the MD5sum- just do a long touch to the file in question and choose "Details".

SHould i use auto nooter 1.0.1 or the nook color v1.1.1 ROM?
and im guessing you have to root it first then install a rom then install a kernal?
would there be a big difference in 1.1.1 and 1.0.1 ?

I bought my Nook Color a couple of weeks ago. It was on 1.0.0. The first thing I did was update to 1.0.1. I then downloaded the Autonooter for 1.0.1 on my pc. I also installed Win32DiskImage.exe on my pc, and followed the directions to burn the image to my sd card. I followed the instructions exactly as they are laid out on nookdevs. I then reformatted my sd card back to normal to use for storage in my device.
One thing that happens when you run autonooter is that clockwork recovery is installed. This is simply a tool that will allow you to perform functions at a lower level than the android interface will allow. It my look a little intimidating at first, but go slow, and make sure you are absolutely sure that anything you do in CWR matches what it is listed in the instructions posted. Every action requires a confirmation, so, again, go slow and think it through.
A few days later, the 1.1.1 update came out. I used the updated Rom and instructions here:
http://forum.xda-developers.com/showthread.php?t=932145
Something that I found confusing is using alternate home screens. I finally determined that Zeam was the right choice for me. It is free in the market. The other tool you should download from the market is called Home Switcher. It will let you switch between different launchers (e.g. Zeam, BN stock home, etc.). Again, you will probably have to experiment a bit to get things working the way you like.
Lastly, to improve the performance overall, I flashed a few different kernels. You may want to play with your nook for a while to get comfortable first. When you choose to flash a kernel, you will boot into recovery (this brings up the Clockwork Recovery program), and pick the zip file that you download to your sd card. My recommendation is to start with the 900mHz kernel first. Make sure your nc is stable, then try some of the faster ones.
As far as MD5s, I have not ever checked after downloading, and have not had any problems as a result. It is something I need to investigate further and start doing.
Hope this helps. I do agree with superkevx above. Browse and search and experiment. It is very unlikely that you will do any permanent damage to your nook, although it is possible. Everyone needs to have at least one bricked device along the way. I have learned more by rendering my devices inoperable and then figuring out how to get them back again. You know you're doing it right if your palms are a little sweaty as you wait for your device to reboot.

you guys have been great , thank you

[Q] Really new newbie with basic questions

I'm new to Android and tablets and have never had a smart phone. However, I am in the computer field and am relatively technical. At the very least, I'm intelligent and can follow clear directions.
Where I'm running into trouble is that, because this is all so new to me, I'm lost when reading a lot of these forums, because I have no idea what all these terms mean or what things are.
Here's where I'm at with my Nook Color. Got it a week ago, rooted it with AutoNooter 3.0, got ADB working (finally) over USB. YouTube works. Can get my email. Using Launcher Pro and Dolphin HD. That's about it.
I'm unclear about a few things, and I realize they're pretty basic. But I've searched and searched and can't find clear answers. Hopefully, someone here can help me:
1. How do I know what version of Android I've got on this thing. Nowhere can I find a place to see the version number. And the AutoNooter 3.0 page didn't tell me what version it installs. 2.2?
2. Does Flash work on this or not? This is related to question 1, because I need to at least know what Android version I'm using before I can even beging to search to figure out whether Flash works with it.
3. What is CM7?
4. I tried installing Flash101.apk with ADB, but get the message: INSTALL_FAILED_OLDER_SDK. Again, I'd like to know what this means, but what I've read says the Flash version is for an newer Android version. So, we're back to... what version of Android is on this thing?
As fas as the rest, does anyone know if there's anything out there that goes over basic terms for those of us completely new to Android and tablets/phones and rooting them? Much of the instructions I read refer to things I've never heard of and, when I try looking up those terms, I just get more terms I've never heard of.
Thanks!

1) You have 2.1 (Eclair)
2) No, you need 2.2. There are several options, including simply running it from an SD card or flashing it to memory (eMMC)
3) CM7 is andrioid 2.3. Good stuff, but still a work in progress.
4) See #2

Thanks very much for responding.
Regarding your answers:
1. Is there a place on the Nook where I can find this?
2. Can you recommend a link to a method for getting this? Is it an upgrade, or would I be completely re-rooting this thing and having to reconfigure everything?
Any suggestions on some basic information for newbies?
Thanks again!

Sorry, I don't think I understand the question. Could you specify what you mean by "this"? Thanks.

Sorry, not sure which question you're referring to.
1. This = The version currently running on it.
2. This = Version 2.2

I can't be certian since I have moved to a CM7 variant, but I think it might be under settings either about or device information.

If you rooted with Autonooter you are on Android 2.1 Eclair. If you are running a froyo rom you are on Android 2.2. If on a CM7 based Rom you are on gingerbread android 2.3

loribuono said:
I'm new to Android and tablets and have never had a smart phone. However, I am in the computer field and am relatively technical. At the very least, I'm intelligent and can follow clear directions.
Where I'm running into trouble is that, because this is all so new to me, I'm lost when reading a lot of these forums, because I have no idea what all these terms mean or what things are.
Here's where I'm at with my Nook Color. Got it a week ago, rooted it with AutoNooter 3.0, got ADB working (finally) over USB. YouTube works. Can get my email. Using Launcher Pro and Dolphin HD. That's about it.
I'm unclear about a few things, and I realize they're pretty basic. But I've searched and searched and can't find clear answers. Hopefully, someone here can help me:
1. How do I know what version of Android I've got on this thing. Nowhere can I find a place to see the version number. And the AutoNooter 3.0 page didn't tell me what version it installs. 2.2?
2. Does Flash work on this or not? This is related to question 1, because I need to at least know what Android version I'm using before I can even beging to search to figure out whether Flash works with it.
3. What is CM7?
4. I tried installing Flash101.apk with ADB, but get the message: INSTALL_FAILED_OLDER_SDK. Again, I'd like to know what this means, but what I've read says the Flash version is for an newer Android version. So, we're back to... what version of Android is on this thing?
As fas as the rest, does anyone know if there's anything out there that goes over basic terms for those of us completely new to Android and tablets/phones and rooting them? Much of the instructions I read refer to things I've never heard of and, when I try looking up those terms, I just get more terms I've never heard of.
Thanks!
Click to expand...
Click to collapse
CM7 (Cyanogenmod 7) is a custom rom, which is a custom operating system that replaces your current one. If you are not familiar with Android yet or rooting, I would stick with autnooter for now. Phiremod beta 2 is a stable custom rom with flash, but you need clockwork recovery first to install it.

Yeah, checked those places Wile E, but didn't see it there. Thanks, though.

stelv, would that run off the card or internally? If it runs off the card, I could try it out without messing up what I've already got, right?

loribuono said:
stelv, would that run off the card or internally? If it runs off the card, I could try it out without messing up what I've already got, right?
Click to expand...
Click to collapse
Most custom rom installs (phiremod) would erase what you have now completely. You would have to redownload programs and use the nook color app from market for books. You could use titanium backup to backup and restore apps. There is a thread here and on androidtablets.net for phiremod beta 2.
But there may be a version of froyo that runs off sdcard but I am not sure how stable that is. If you are running froyo from an sdcard and mess with the nook internally, it may mess your nook up when you remove the card and try to go back to your old setup.
The good thing with the beta 2 version of phiremod is that you can restore a previous version of the nook from the clockwork recovery menu if you have cwr installed. That is if you make a backup first through cwr on your autonooter version of nook.
If you decide to go the route of a custom rom I would check out the how to on androidtablets.net about clockworkmod recovery first.
sent from my rooted nook color

Thanks for all the info. When you say "custom roms," are you referring to any rooting of your Nook Color? Is the version of Android I have after running the AutoNooter 3.0 considered a custom rom? Or did I just merely strip off some of the "skin" Barnes & Noble has on there, 'cause it didn't seem very much like I'd started over, but more like I "got past" something that was already on there and, therefore, opened up more functionality. Does that make any sense? I'm getting the feeling that Nookie Froyo and CM7 completely wipe your Nook and give you a fresh OS. Yes?

loribuono said:
Thanks for all the info. When you say "custom roms," are you referring to any rooting of your Nook Color? Is the version of Android I have after running the AutoNooter 3.0 considered a custom rom? Or did I just merely strip off some of the "skin" Barnes & Noble has on there, 'cause it didn't seem very much like I'd started over, but more like I "got past" something that was already on there and, therefore, opened up more functionality. Does that make any sense? I'm getting the feeling that Nookie Froyo and CM7 completely wipe your Nook and give you a fresh OS. Yes?
Click to expand...
Click to collapse
Ok here is another long book by me, sorry for the long posts
Yes, Nookie Froyo, CM7, Phiremod give you an entirely new OS.
Custom roms are not any rooting. They are entirely different android operating systems so to speak. Most require one to wipe the devices internal Rom (Read Only Memory) in order to put a new one on. This is sort of risky as it erases everything, but is made less risky by using stable custom roms in combo with clockwork recovery. If the internal memory gets messed up and the procedures for instaling a custom rom are not followed or an error happens, your device will be unusable until fixed (fixed usually by booting CWR off sdcard and installing a stock image). Please do research and ask around XDA or androidtablets before installing a custom rom to know what the ups and downs of it are.
Also please keep in mind on the Nook certain Roms like CM7 require a different version of CWR and require a workaround to work as of now. It can be kind of tricky to install. Phiremod Beta2 can be installed through normal recovery. Check us out over at http://www.androidtablets.net/forum/nook/ if you want. There are a lot of useful guides over there.
Yes autonooter just opens up functionality
Autonooter is not a custom Rom. It is just the method of rooting or unlocking your android device. Rooting an Android device makes you system administrator of the device. This is so you can do things beyond what B&N lets you do with the device like use the Android market.
This is what I did with my Nook. Autnootered it>installed Clockwork Recovery>Made a backup with Clockwork Recovery>Then Installed Phiremod beta2 through clockwork recovery as per the instructions for that rom

Thanks again for this. I appreciate you taking the time to explain this to a newbie. It's beginning to make much more sense now. For now, I'll stick with what I've got, keep reading and then go from there.

Ugh. Authentication error while reading a book and then a reset, and I'm back to the beginning. Except worse, because even navigation while reading a book doesn't work right. Anyone experience this?

Sorry I don't have that issues so I am not sure. Maybe its a password issue?

Perhaps. Don't know. Starting over from scratch. All I know is that it happened when I was merely reading a book, about ten minutes after trying to login to Google Talk with a different Google account than the one I used during the AutoNooter process.
Who knows...

need help with the 1.1.0

i have rooted and flashed the hero many many times, but this one makes me more nervous I dont have much time to read as it is a birthday gift, but i keep reading about problems with youtube and gmail.. do they have to be linked before rooting.. whats the best rom with 1.1.0..
i just dont want to miss any vitally important steps and screw this up.. any help? Is there a step by step guide.. thanks much

I would start here http://forum.xda-developers.com/showthread.php?t=872003
After rooting your device you can decide to stay on the stock rom and just have more functionality or you can move to a variety or other roms running Andoid Eclair,Froyo,Gingerbread, or Honeycomb.
Each of these ROM has their own ups and downs. If this is a gift for a non-techy person I would suggest just using a rooted stock with some tweaks or rooting and installing Eclair as these seem to be the most stable options at the moment.
Because the Nooks has priority on SDcard booting you can run any of these roms off the SDcard as well while leaving your stock Nook OS in place. This is a great option if you just want to give a bunch of different ROMs a test. Also the boot priority of the SDcard makes 'bricking' the nook nearly impossible. So while you can still screw up your Nook you will most surely be able to fix it.

Thanks for your help.. I rooted it and left it stock for now.. if he wants something different i will change it to Eclair.. its **Beautiful** I am impressed.. might have to pick one up for myself.. Thanks

[Q] Need some help changing ROM on G1

Hi guys, I have an old G1 at home that I've been using as a time killer, to play chess and some music. I want to try changing the ROM on it, because I have some problems with it, but i'm not sure where to begin. I'll give a quick rundown of the phone's problems and what I'm trying to do. This is an old machine I bought for my dad awhile ago. It's not been used for some time and I wanna to do something with it. It has a lot of problems which I don't understand. For example I cannot connect to google nor through a data plan on a simcard or through Wifi. I've seen threads having some tips on this but none helped. Same problem with some applications - facebook, teamviewer and so on. They just won't connect, although wifi works fine with the browser, so I don't know what going on. There are other problems as well and I think it's running slower than it should because it won't even manage to do stuff a generic G1 should - videos have to be heavily converted to even run - trying any video player is useless - it'll lag as hell. I have to convert to a specific audio and video format with lowered fps, then it runs ok, but still only using the generic video player. Anything else will just become a comic book.
Anyway - this is a phone I got off eBay and it already came rooted and with the Super D rom loaded (kernel 2.6.29.6-SuperD) So because all the problems I want to reflash it completely to try find out, whether it's all hardware related or the rom's unstable... Now, because it is already rooted and I'm new to this, I don't know where to start.
I have looked through a few rooting/flashing guides, but my problems is: I don't know whether I need to do it all, or can skip a few steps, because it being rooted already. For example whether I need to downgrade anything again, or not before going on. My first important question is, is there a point in flashing anything higher than android 1.6? As the phone is very limited with it's resources, I'm not sure, whether for example flashing the 2.2 froyo CM rom will do any good. Secondly: there are several different guides out there and I don't know which one is good for me. I believe I tried the one click thing once, but it didn't work then, but not sure what was the problem. I presume it is because I either didn't have to do all of it, or I didn't do something else I was supposed to.
So all in all, if someone could point me to a good guide, that would take in account the option, that it already is rooted and I just need to change the Rom, it would be greatly appreciated.

Magicnet2 said:
Hi guys, I have an old G1 at home that I've been using as a time killer, to play chess and some music. I want to try changing the ROM on it, because I have some problems with it, but i'm not sure where to begin. I'll give a quick rundown of the phone's problems and what I'm trying to do. This is an old machine I bought for my dad awhile ago. It's not been used for some time and I wanna to do something with it. It has a lot of problems which I don't understand. For example I cannot connect to google nor through a data plan on a simcard or through Wifi. I've seen threads having some tips on this but none helped. Same problem with some applications - facebook, teamviewer and so on. They just won't connect, although wifi works fine with the browser, so I don't know what going on. There are other problems as well and I think it's running slower than it should because it won't even manage to do stuff a generic G1 should - videos have to be heavily converted to even run - trying any video player is useless - it'll lag as hell. I have to convert to a specific audio and video format with lowered fps, then it runs ok, but still only using the generic video player. Anything else will just become a comic book.
Anyway - this is a phone I got off eBay and it already came rooted and with the Super D rom loaded (kernel 2.6.29.6-SuperD) So because all the problems I want to reflash it completely to try find out, whether it's all hardware related or the rom's unstable... Now, because it is already rooted and I'm new to this, I don't know where to start.
I have looked through a few rooting/flashing guides, but my problems is: I don't know whether I need to do it all, or can skip a few steps, because it being rooted already. For example whether I need to downgrade anything again, or not before going on. My first important question is, is there a point in flashing anything higher than android 1.6? As the phone is very limited with it's resources, I'm not sure, whether for example flashing the 2.2 froyo CM rom will do any good. Secondly: there are several different guides out there and I don't know which one is good for me. I believe I tried the one click thing once, but it didn't work then, but not sure what was the problem. I presume it is because I either didn't have to do all of it, or I didn't do something else I was supposed to.
So all in all, if someone could point me to a good guide, that would take in account the option, that it already is rooted and I just need to change the Rom, it would be greatly appreciated.
Click to expand...
Click to collapse
First thing I would do is just factory reset it through recovery (power on while holding home) and see if all works after this. Super d is for sure one of my favorite donut ROMs and it shouldn't be having the issues you have.
If that does little or nothing than write down all info from bootloader (power on while holding camera) here and the version of recovery you have (written in recovery screen)
Sent from my Nexus 7 using Tapatalk 2

Hi. Thanks for the quick reply. I've already reset it multiple times, but it didn't change anything. What most angers me, is the Wifi issue (because I know my dad has been using his dataplan and it worked fine and when I tried it later, it just didn't work anymore) and the video thing.
As for the info:
Hboot-1.33.2005 (Drea11000)
Clpd-4
Radio-2.22.23.02
Recovery is ClockworkMod Recovery 2.5.0.7

Magicnet2 said:
Hi. Thanks for the quick reply. I've already reset it multiple times, but it didn't change anything. What most angers me, is the Wifi issue (because I know my dad has been using his dataplan and it worked fine and when I tried it later, it just didn't work anymore) and the video thing.
As for the info:
Hboot-1.33.2005 (Drea11000)
Clpd-4
Radio-2.22.23.02
Recovery is ClockworkMod Recovery 2.5.0.7
Click to expand...
Click to collapse
Yes it is strange, try finding a ROM called donut by Laszlo, search is down right now but it should be within the first five pages or so in developers thread. Put on sdcard along with this
http://www.androidfilehost.com/?fid=23212708291678371
First flash super wipe in recovery and then flash new ROM
If it all does not work still we will go from there
Sent from my Nexus 7 using Tapatalk 2

Right, so I've got some new info on this. I wanted to go reflash, but just for the sake of it, I re-wiped though recovery and nothing changed. then on the second time, the market suddeny started working through wifi, which it has not for the past few months, even after 3 or 4 wipes. So it started working, but the signal kept failing. It found the first application, downloaded, installed, then "network problem" so I reflashed using the files you mentioned. It worked beautifully on the first fly, for which I am grateful. This was my main concern - I had no idea, whether I needed to change the radio or bootloader or anything prior to trying to flash the rom. So the rom works nice, the market and facebook and teamviewer do connect now using wifi, but I keep loosing the signal. Better said - he stays connected to wifi, just that the applications keep throwing network errors and loose connection. So I presume, it will be either hardware related, or I was wondering, if a change of radio might help... Secondly, I keep getting one more problem I had with the old Rom and that is - when using ES File explorer, when I close by pushing the back button, it closes and then an error says it stopped working and needs force closing. Wondering how this kind of error can transfer between different Roms. Again - posibly hardware related? I don't know.
Anyway, the rom works nice, so I'll try it out and see if it's better than the previous one. One question though - when flashing to a different Rom, do all of them have specific requirements for radio and bootloader and recovery and so on, or is the setup I have ok for flashing anything, that is suited for the G1?
EDIT: One more thing I just remembered. The Superwipe, as I read the description, was supposed to wipe everything + the SD card as well. First of all I noticed that it took just about a second or two, which I thought was a bit too quick, but the SD card was not wiped at all, so I'm thinking, that theoretically there could be a file on there, that causes the problems, that have transfered from Rom to Rom, as it was not wiped at all. I'll reformat the SD card, superwipe it, reflash the Rom and see what will happen. Will post the results first thing tomorrow.

It only wipes ext partition not fat32
Only newer ROMs will require a different bootloader/radio, which also will give you more ram so it is preferred. See ezterrys post on the 2708+ update or read the through the thread below this on where I discussed the benefits of upgrading with another dream user
Sent from my Nexus 4 using XDA Premium 4 mobile app

Right, so from what I see from the other thread of yours, CM5 should be a good Rom to try. I will definitely wanna go there, cause while the current Rom seems a bit better than the Super D, it seems it uses up more memory - can't install as many apps as before and I'm keeping it pretty low on apps. And I definitely want to see, whether it will improve any of the lingering problems I've been having, or whether it'll be worse. So judging by what you told the other guy, I already have the right bootloader as I have the 2005 with fastboot enabled, but I'll have to update the radio. Here's what I'm not sure and that is, which to choose. Should I stay with the current SPL and get the same radio the other guy had (RADIO-2.22.19.26i) or should I go straight for the 13d SPL with radio-2.22.27.08? I would say, for now would be safer to stay with current SPL, update the radio and then flash Rom + Gapps and see what it does. Plus if I remember right, you said that to get the ramhack I need the 13d spl, which doesn't support fastboot...

You got it all, well you don't need to change radios, the one he has is a Europe version, yours is more us. Both work fine for cupcake, donut and eclair ROMs. You can try out the other if you were getting poor reception but not needed
Cm5 will work fine for you as of now, just full make a backup, wipe, superwipe, fastboot -w whatever, then flash ROM, then gapps then reboot
The ram hack is awesome but so is learning fastboot. I do recommend you at some point upgrade to the .13d SPL but I think its a good idea to flash a few things first and be comfortable before doing so. If you have issues having fastboot is helpful in fixing things
Sent from my Nexus 4 using XDA Premium 4 mobile app

Ok. So what I did is partition the SD card using the nice "Mini tool partition wizard" and went for a 250 MB ext4, made a backup, left the radio be so far, wiped, flashed the CM5 and Gapps and I have to say I'm impressed at how swift the Rom works. It appears to be generally faster than both the SuperD and Laszlo Donut Roms. I have been testing it only a short while yet, but the wifi, although it shows constantly weak signal (one or two lines), it hadn't lost connection yet, which gives me hope and the apps2ext seems to work perfectly right away. At least I'm able to move them around and it installs straight there, without any failure so far and the apps work so thumbs up.
This deserves a big thanks to you for the supplied info. Before I wrote this thread, I was about to try one of the long guides - which would take me through downgrading and everything - you saved me a lot of stress man I'll play around with this and will try going for the ram hack a bit later. I'll let you know any bugs I notice...
P.S.: You were right to suggest getting familiar with fastboot and adb - it's a great thing and it's good to know I've got it set up and running fine.