Am stuck in boot-loop when the phone(ROOTED) was rebooting after installing a new font using Fonter.
The device doesn't have CWM recovery, it has(accessed by holding Volume down and power button simultaneously) android system recovery(3e) where I tried both "wipe data/factory reset" and "wipe cache partition", still didn't work.
For flashing Stock ROM I need to use Smart Phone Flash Tool as its a MediaTek based phone. But I don' t have Android USB Driver installed and now since I can't switch on my phone the the Adb Driver Installer on my pc doesn't detect my phone to install the required drivers required before flashing using the Smart Phone Flash Tool .
Please help me recover my phone ANYHOW.
You can also disable the Xposed framework by repeatedly pressing the power button while booting the device (v2.5 or above). If you can. That's gonna be hard to do with bootloop.
Sent from my personal space station with the power of the minde!
Adywizard said:
You can also disable the Xposed framework by repeatedly pressing the power button while booting the device (v2.5 or above). If you can. That's gonna be hard to do with bootloop.
Sent from my personal space station with the power of the minde!
Click to expand...
Click to collapse
I am facing the similar problem. I have reformatted my rom twice and now in the 3rd time I am realizing that it happens when I try to install a font from Fonter Xposed Module. I tried your suggestion but I am unable to boot my device and the booting continues :crying::crying:
Bootloop after installing a Font under Xposed module Fonter
I am having the same problem.
I am using Lenovo Ideatab A1000-G.
After installing a font from Fonter my device underwent a reboot and it had not started till now.Tried Recovery mode Data Wipe and Wipe Cache but nothing happened.
It Stucks at the Lenovo Icon and startup sound is also coming but after that nothing is happening.
It just gives vibrates on pressing the buttons.
Guys,Please help...
If there is any solution then please send me
[email protected]:good::good::good:
Related
was trying out the app "Anim Mod" installed chose animation reboot..... now stuck in a bootloop. volume and power combo dosent work please please help!!
What?you mean you can't enter software upgrade mode?
nope i cant.... tried the known key combinations cant even get it to go into recovery or s/w update mode
tried pulling out the battery sim card and micro SD and then hold volume up and plug in the usb cable?
got it sorted.... the ONLY key combo that worked to get into recovery for me was Huexx method
-------------------------------------------------
WHAT TO DO IF GOT A BOOTLOOP
1.- Remove battery *edit** I didnt remove battery, I plugged out the usb instead**
2.- Power on your phone again, and once the 4 leds start flashing, repeatedly press a physical key (g-button or volume rocker) until your phone reboots and ir access to CWM
3.- Wipe Cache and Dalvik Cache, then reflash the ROM again
4.- Reboot and wait
http://forum.xda-developers.com/showthread.php?t=1454274
--------------------------------------------------
!!NOTICE!!
Stay clear of the app "Anim Mod" it bootloops your phone!!! (for Zues rom at least...... true story bro.... =P)
Troubleshooting required..!!!
Hey guyz I need some help in getting down to download mode. I have a out of the box Captivate. I flashed and installed the latest version of Cyanogen mod 9 and was facing a problem in connecting to my laptop as it was not detecting and then downgraded to previous version to check.
Got stuck in boot and restarts repeatedly and the 3 button mode is not working. Could you help me get into Download or Recovery mode ....?
Sorry dude but people from thecaptivate forum could help you best
Sent from my LG-P970 using Tapatalk
Zaihanzainal said:
got it sorted.... the ONLY key combo that worked to get into recovery for me was Huexx method
-------------------------------------------------
WHAT TO DO IF GOT A BOOTLOOP
1.- Remove battery *edit** I didnt remove battery, I plugged out the usb instead**
2.- Power on your phone again, and once the 4 leds start flashing, repeatedly press a physical key (g-button or volume rocker) until your phone reboots and ir access to CWM
3.- Wipe Cache and Dalvik Cache, then reflash the ROM again
4.- Reboot and wait
http://forum.xda-developers.com/showthread.php?t=1454274
--------------------------------------------------
!!NOTICE!!
Stay clear of the app "Anim Mod" it bootloops your phone!!! (for Zues rom at least...... true story bro.... =P)
Click to expand...
Click to collapse
And if it doesn't work, you can connect your phone to your computer, start adb shell and type in 'reboot recovery'. Your phone will enter cwm and you can restore a backup, reflash a rom..
I use this method if I get a bootloop. (I'm developing a rom.) I think it's very helpful, because you don't must use smartflashtool.
cakebomb.
in some situation adb cannot connect the phone and you have to use the smartflash tool
Anim Mod bootloop
I have the same problem here! I got bootloop after using anim mod. I'm able to go to stock recovery. I had backup my file then did factory reset but problem still not solved. I had backup my framework-res.apk file but it's not on a flashable zip format.
i've tried using apk multi tool on trying to do and adb push but it's not working
what can I do next?
connect your phone to pc in s/w upgrade mode->pull out your battery, hold + and plug in the usb in phone..and after that, use smart flash tool to flash firmware(v20) with CWM included..and after firmware flash your phone will enter in CWM recovery, now from CWM you need to flash supersu from sd card..after flashing firmware and superuser, DO a data,cache,davlik cache wipe !..and just after this you can exit from CWM(reboot)
Here's a link to all tools that you need to repair your phone. You need to use smartflash tool, a V20 firmware with cwm( you can download it from here), and put the Superuser.zip to your sd card..and install USB driver if you haven't installed it yet
I use this method every time when my phone is stuck on bootloop or if I've flashed a ROM that doesn't have root..or other situations.. This method brings you to a rooted gingerbread with CWM(this is all what you need, because from here you can do what you want..for example flashing which ROM you like )
!!! You can use this method anytime...doesn't matter which ROM you have or if your phone is rooted or not. After using this method your phone will be fully rooted, will have CWM recovery and android 2.3 gingerbread !!!
Hi,
I've got a gingerbread ROM installed, and am having a problem with CWM.
At the moment, all I get is the options to boot WebOS, boot CM, WebOS recovery, shutdown, or reboot.
I have no options to mount storage or flash files, and have tried to re-flash CWM a number of times with no success.
Does anyone know what I've done wrong?
Also, if I go into the USB mode (power + vol up), on exiting this mode, the Touchpad won't do anything for about 10 minutes plus - just black screen & nothing happens when I press power button, or any other combination of buttons.
Help would be appreciated, as I can't install new roms etc from CWM, which is quite annoying!
Thanks!
EDIT: I've managed to fix this now - sorry for post! Cheers, and feel free to delete this thread.
groves olehred
how you fix this ?
Hi guys,
a friend of mine has a huge problem with his rooted P970 (android 2.3): after installing an update, the system only boots into ClockworkMod, rebooting from there only goes into the CWM Recovery again. Holding VOL-UP when the phone is connected to the computer and even holding HOME+VOL-DOWN will boot the CWM. VOL-UP within CWM doesn't work as well. Factory Reset and installing a ROM from CWM doesn't make a difference either.
So we tried to install a firmeware via SmartFlash (V20N). But the problem is that the COM-port only appears for few seconds until the CMW is completely booted, than it vanishes again. So we really have now idea what to do next.
Thanks for your help!
You need to pull out the battery, insert it again, DONT POWER ON THE PHONE! Now hold VOL+ Button, then plug in the USB cable and you should see the software update screen, then use smartflash. OR in CWM, wipe data, cache, in advanced wipe dalvik, try to install a custom ROM like boype's CM7 kang, have fun
Hi all, I need help with my Nexus 7. I tried installing CMW, and now my Nexus 7 will only boot into CMW, and not into the OS. I cannot boot fastboot, I've already tried unplugging battery, pressing power button and Volume Down button, this will just take me to CMW. I tried wiping Data/Factory Reset, wiping cache, and restoring from a backup, but all my Nexus does is boot into CMW. Please someone help, I fear I may have bricked my Nexus 7.
I've also tried holding both volume keys UP / Down with Power button but can't get to fastboot. Someone please help
Well today i tried to install CM 11 on my xperia sp
First i installed CWM on my device and then i rebooted teh device and formatted every thing including Dalvik Cache
and then i installed the CM 11 zip and rebooted the device
After that my device doesnt starts, i tried holding the back small button it just vibrates
and also i tried (power button + volume up/down button) it just vibrates and shows green and blue light
I need to turn it on, Pls help me anyone pls :crying:
Aɪʀʙᴏʀɴᴇ said:
Well today i tried to install CM 11 on my xperia sp
First i installed CWM on my device and then i rebooted teh device and formatted every thing including Dalvik Cache
and then i installed the CM 11 zip and rebooted the device
After that my device doesnt starts, i tried holding the back small button it just vibrates
and also i tried (power button + volume up/down button) it just vibrates and shows green and blue light
I need to turn it on, Pls help me anyone pls :crying:
Click to expand...
Click to collapse
Read guides more carefully. You wipe everything before installing a new ROM. Wipe, reinstall.
Aɪʀʙᴏʀɴᴇ said:
Well today i tried to install CM 11 on my xperia sp
First i installed CWM on my device and then i rebooted teh device and formatted every thing including Dalvik Cache
and then i installed the CM 11 zip and rebooted the device
After that my device doesnt starts, i tried holding the back small button it just vibrates
and also i tried (power button + volume up/down button) it just vibrates and shows green and blue light
I need to turn it on, Pls help me anyone pls :crying:
Click to expand...
Click to collapse
Flash any Kernel based on CM11 using flashtool.( you can get flashtool by their main site).
Boot to CWM recovery.
wipe data/factory settings.
wipe cache.
advance> wipe dalvik cache.
Then install your ROM zip.
If this doesnt help, download the original firmware and using flashmode in flashtool, flash that you will get your original rom back but you will lose Root.