Related
Hi!
After searching the forums for a while I did not find a thread exactly matching my problem, so if I've overseen it, please just point me there.
To my problem:
I did a very stupid mistake, flashing a new custom ROM with a different kernel (as usual, cooked in Docs Kitchen) without converting back the lagfix. So I ended up with a non-booting phone - so far, so bad. Note to myself: Never flash a phone during the carnival weekend again.
So I booted into download mode and tried to recover it via Odin, but here I got my really bad surprise: USB device is not recognized, thus I Odin does not see the phone.
I tried 4 different PCs with Win7 or XP, a Linux desktop and a Macbook. I also tried 5 different USB cables (they all work with other smartphones like the Desire and the HD2). Wherever I stick the phone in, it is not recognized (code 10/code 43 in Win7). I used the stand-alone-drivers from the sticky forum thread here, and also most recent Kies versions, always the same: USB device not recognized.
Does anybody have an idea how to revive the USB connectivity? I'm almost at the point to send it in for repairs...
Or can someone elaborate how I could have killed USB with corrupting the ROM? I've to admit I do not really understand how these two are connected.
--Jens
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
formatted to ext4 without any backup
I did a very stupid mistake too. Got darky's rom 9.3., installed i, everything worked great(really awesome thing), then i wnt to recovry mode and entered tthe speedmod and it showed mr that my phone has rtf files system not EXT4 as it should be, thou i installed the speed mode. then i chose to repartition it to ext4 but i didn't choose the backup. Just clicked to format the sd. It did formatted to EXT4, rebooted, i saw the darky's rom logo and the the phone vibrated and the logog of the droid just flashed. I tried to enter recovery mode-didn't load. Started the download mode connexted to pc used ODIN 1.7 with PDA I9000XXJPY.tar, MODEM I9000XXJPY.tar, GT-I9000-CSC-MULTI-OXAJPY-LITE.tar s1_odin_20100512.pit.
The phone has started, appeared teh stok galaxy s logo and it's just flashing. Help needed. Don,t know what to do know. I have galayx s i9000 european version.
somehow i've managed to install new firmare 2.2.1 /I9000XXJPY-baseband /2.6.32.9 [email protected] #1-kernel version, but z4root isn't working. When i start permanent root the programm ends on aquiring root shell, the debug mode is on
Got it all running, installed Darky's rom 9.3. Thanks anyway.
theduckking said:
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
Click to expand...
Click to collapse
Yep, I can boot into download and recovery modes, but that's it.
The only apparent change in the new custom ROM was the kernel.
I also cannot really access my external SD card (it shows me some phantom files, but not the actual content of the SD), otherwise I'd try to recover it this way.
I agree with the hardware issue, if it wouldn't have coincided with the flash procedure...anyway, I think I'll send it in for repairs if I don't get it to run on this sunday.
I have the exact same problem, except that I can access my external SD. I got the problem after upgrading to Darkys Rom 9.3 the usual way, but switched from Speedmod to Voodoo. After that update, my USB didn't work anymore.
I can't get neither Xp or Win 7 to recognize my phone. USB device not recognized, and tried all the tricks. Reinstalling Kies and drivers, switching between the different modes (storage, kies media, ask, debug...) But still no USB connection.
I updated to darkys 9.5 (transferring the rom using bluetooth, and updating using CWM), but still it doesn't work.
Can get it into download mode, but still can't connect using USB and Odin.
HELP!
Did anybody ever find a solution for this?
European version of I9000, bought in Denmark. No Simlock
Same thing here after installing JV1 + Ultibread Rom 1.4... Still no solution
*shameless push*
Any solution here? I dont have that problem, but it sounds too scary to not have a working solution :S
Same prob here! Any news?
Any solution? I have the same problem.
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
bassem8246 said:
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
Click to expand...
Click to collapse
But if you are in download mode on your fone you'd rather should have a look at your configuration on the computer. Because the fone still can be flashed if the symbol for download still appears.
- Kies is shut down while ODIN is active?
- latest Samsung USB driver installed?
- Odin started with Admin?
Btw. did you try to get into recovery mode? Maybe this also still is working as the partition is quite small and chance high that it was flashed w/o faults. So you may be able to flash a zipped ROM rather than a tarball for Odin.
USB Not working when Phone plugged in... try these..
Unplug Device from PC..
Windows go to Device Manager...
Scroll down to Universal serial bus Controllers
Start with the top one and work your way down ..uninstall them all..
When done reboot Computer and let it install them all.. then try again
2.Settings --> USB Setings (under wireless & network may differ depending on Rom used) --> Try other settings Mass storage
3.Different USB ports on PC
4.Uninstall KIES from PC (reboot PC to take effect) and Reboot and just install samsung USB drivers....
5.Using windows type in msconfig in Start>Run box... windows will pop up and untick KIES from STARTUP TAB
Apply to take effect and restart machine.. try using ODIN to Flash ROM
I myself only use the Samsung USB drivers and ODIN never use KIES
or ...Check my signature and try SD formatter
Hi,
I was using F1 V6 ROM on JVK for some time (flashed it with no problems using Odin and Clockwork). After some time, it started to crash more often. I triend V7 but it was even worse so I got back to V6. The only problem was often restarts and sometimes slow operation.
Yesterday I decided to switch to Cyanogen to give it a try. I did it without flashing from scratch. I just used Cyanogen 7.1 installation through Clockwork. It seemed OK untill I tried to connect my phone to PC via USB. I couldn't get any response from PC (not even a sound indicating that something was connected to USB) or Phone (no mount USB screen).
So I was able to charge my phone through USB but not to connect it to PC (tried 2 PCs, different cables, different ports). It doesn't seem like driver problem (no sign of connecting phone to PC, nothing).
I thought that it might be some problem with Cyanogen ROM. So I tried to go back to F1 V6 (wipe) through Clockwork. After doing it, I got boot loop but still showing the logo of Cyanogen (not SGSII from F1). Having no USB connection and being unable to start the phone, I tried to do recovery (I had a backup of F1 V6 from the moment before installing Cyanogen. That didn't go well either. The process stopped and left me with Samsung Galaxy S logo (no boot loop - just hanging there). I cant get into recovery mode anymore. I can only get to download mode.
So the status right now is:
Download mode - OK
USB - can't get phone to connect with PC (no signs of connection so probably not a driver problem but maybe? I tried reinstalling kies, drivers, running Odin, no sign of connected phone, USBDeview shows no Samsung or Kies or Android drivers in my system right now).
Hanging on the Samsung Galaxy S screen.
Did anyone had similar situation?
What do you advice? Any idea on a atest checking if USB hardware is fine?
Was it possible to break USB hardware or driver in phone by installing Cyanogen 7.1 on F1 V6 SGS2?
Any help would be appreciated.
Thanks
kaminkac said:
Hi,
I was using F1 V6 ROM on JVK for some time (flashed it with no problems using Odin and Clockwork). After some time, it started to crash more often. I triend V7 but it was even worse so I got back to V6. The only problem was often restarts and sometimes slow operation.
Yesterday I decided to switch to Cyanogen to give it a try. I did it without flashing from scratch. I just used Cyanogen 7.1 installation through Clockwork. It seemed OK untill I tried to connect my phone to PC via USB. I couldn't get any response from PC (not even a sound indicating that something was connected to USB) or Phone (no mount USB screen).
So I was able to charge my phone through USB but not to connect it to PC (tried 2 PCs, different cables, different ports). It doesn't seem like driver problem (no sign of connecting phone to PC, nothing).
I thought that it might be some problem with Cyanogen ROM. So I tried to go back to F1 V6 (wipe) through Clockwork. After doing it, I got boot loop but still showing the logo of Cyanogen (not SGSII from F1). Having no USB connection and being unable to start the phone, I tried to do recovery (I had a backup of F1 V6 from the moment before installing Cyanogen. That didn't go well either. The process stopped and left me with Samsung Galaxy S logo (no boot loop - just hanging there). I cant get into recovery mode anymore. I can only get to download mode.
So the status right now is:
Download mode - OK
USB - can't get phone to connect with PC (no signs of connection so probably not a driver problem but maybe? I tried reinstalling kies, drivers, running Odin, no sign of connected phone, USBDeview shows no Samsung or Kies or Android drivers in my system right now).
Hanging on the Samsung Galaxy S screen.
Did anyone had similar situation?
What do you advice? Any idea on a atest checking if USB hardware is fine?
Was it possible to break USB hardware or driver in phone by installing Cyanogen 7.1 on F1 V6 SGS2?
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
Cyanogen uses a different file system, so to get it back to a Sammy ROM you need to flash it with Odin. and cyanogen doesn't use the Sammy driver for connecting to the PC. download nexus s drivers from the Android SDK and install it.
Sent from my GT-I9000 using xda premium
OK, so how do I install these drivers when my PC can't see that I have my phone connected to USB port? There is no driver error. After connection nothing happens.
Is there a way to install these drivers on Windows 7 without actually having sgs listed on device list?
any help with that?
kaminkac said:
OK, so how do I install these drivers when my PC can't see that I have my phone connected to USB port? There is no driver error. After connection nothing happens.
Is there a way to install these drivers on Windows 7 without actually having sgs listed on device list?
any help with that?
Click to expand...
Click to collapse
Get your phone into download mode (volume down + home + power) and see if windows lists it then.
Sent from my GT-I9000 using xda premium
Thanks but it does not.
No sign of connecting phone to PC.
any ideas?
kaminkac said:
Thanks but it does not.
No sign of connecting phone to PC.
any ideas?
Click to expand...
Click to collapse
Reflash the CM7 Rom, and see if it shows up in device manager. Do you get an option on CM to share disc drives with usb plugged to the computer?
Oh, and if you have KIES installed, try remove it and remove the driver pack too (i know it affects ODIN's ability to see the phone).
Solved
Thanks for help.
I got different cable (third) and different (third) PC and somehow it worked - PC noticed connection of SGS in download mode and than it was easy.
I installed clean JVT, than CF-Root and CM 7.1 + google apps.
It seems to work fine for now.
Please close this thread.
Cheers
Hello,
I have been using some release candidates of ICS which were available here on my i9000. Everything worked out generally fine. Sometimes my phone crashed and then it wouldn't want to go further than my i9000 and afterwards the google screen. Both screens would just repeat endlessly without the phone doing anything.
When this happened, I was always able to go back to recovery mode and uninstall everything and reinstall the rom. This would always solve my problem.
Now here is my current issue: on Saturday my phone crashed again, but now I can NOT enter recovery mode any more. Whenever I plug in a usb cable or normal cable to charge my phone it shows the calculating sign and after a few secs it's gone and starts all over again instead of showing the green battery slowly getting full.
The only thing which works is getting into download mode. So I tried to get odin to work. I installed kies to get the usb drivers and I opened odin (on both windows and a mac), but it does NOTHING.
Is there any other way I can reset my phone to get it somehow working again? Is there another way to get into recovery besides the buttons or using odin? I know of ADB but that requires the phone to be on....
When you plug your phone in (and enter download mode) what device type does windows detect it as?
Because you can get to download mode normally a "good" sign that it isn't bricked (and even when "bricked" it can be un-bricked)
Edit
Just tested mine, entered download mode and odin shows it connected on Com6, device manager shows it connected as a "Samsung Mobile Modem"
try and install the samsung modem drivers separately then try and connect connect
Hi,
first, be sure that all Kies-services are disabled via Taskmanager otherwise ODIN wont work correct!
then Bring your SGS1 to the Downloadmode, connect the USB_cable at the phone.
fullfill all sections you need in ODIN (PDA-Kernle, CODE-modem, CSC-CSC, pitfile512) klick repartition on
then connect your SGS1 via USB to the PC
Odin will show "connected"
Press start.
http://www.youtube.com/watch?v=1RoZU5ZPMS4
if your still stuck checkout this video might help good luck
Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it
Okay.
I bought a Samsung Captivate from a company on Amazon a few weeks ago, and it started having the problem with the speaker cutting out. I took it apart to try the two fixed I'd googled - loosening the speaker screw and reseating the speaker ribbon - and neither worked, and now the speaker is completely dead. That isn't my biggest problem, though.
Somehow in the process of the above, I did something that made it so that the phone will only boot into download mode. I can hold down the power and volume buttons and get it to reboot, but it only reboots into download mode again, and won't recognize in windows via the USB cable. It did recognize once, and I used Odin3 to get it back to a factory reset image (it was running stock firmware, but I'd rooted it to remove the AT&T apps) thinking in vain that it might help, but it still only boots into download mode.
But there's the weird thing: It won't power off in download mode unless I pull the battery out, but if I put it back in then plug in the USB cable while holding both volume buttons, it boots right into android, no problem. Everything's fine except the speaker still doesn't work, it doesn't show to be charging while plugged into the USB cable, and still won't recognize the USB in Windows. But if I turn the phone off and back on, I'm back in non-recognizing download mode again.
Everything otherwise works fine once I get it into android, I can even tell it to erase all settings and factory reset, and it reboots itself, re-flashes to stock, and works fine until I power off and back on, then back to download mode.
So I guess the question is oh god what have I done?
Freud,
I too am having this issue with my roommate's phone. The only way I can get it to boot is if I perform a restore using a Odin3 image. However once it's turned off it only boots into download mode. I nor the roommate have opened the phone. It just one day decided to keep booting into download mode.
Any asistance in this matter would be appreciated! Thank you.
zeyoner said:
Freud,
I too am having this issue with my roommate's phone. The only way I can get it to boot is if I perform a restore using a Odin3 image. However once it's turned off it only boots into download mode. I nor the roommate have opened the phone. It just one day decided to keep booting into download mode.
Any asistance in this matter would be appreciated! Thank you.
Click to expand...
Click to collapse
i have the same problem! the only way to boot my sgs is to flash a stock rom with odin. and every time i turn off the phone then it reboots in download mode!! someone has a fix? i need help!!! thanks
Pink Freud said:
Okay.
I bought a Samsung Captivate from a company on Amazon a few weeks ago, and it started having the problem with the speaker cutting out. I took it apart to try the two fixed I'd googled - loosening the speaker screw and reseating the speaker ribbon - and neither worked, and now the speaker is completely dead. That isn't my biggest problem, though.
Somehow in the process of the above, I did something that made it so that the phone will only boot into download mode. I can hold down the power and volume buttons and get it to reboot, but it only reboots into download mode again, and won't recognize in windows via the USB cable. It did recognize once, and I used Odin3 to get it back to a factory reset image (it was running stock firmware, but I'd rooted it to remove the AT&T apps) thinking in vain that it might help, but it still only boots into download mode.
But there's the weird thing: It won't power off in download mode unless I pull the battery out, but if I put it back in then plug in the USB cable while holding both volume buttons, it boots right into android, no problem. Everything's fine except the speaker still doesn't work, it doesn't show to be charging while plugged into the USB cable, and still won't recognize the USB in Windows. But if I turn the phone off and back on, I'm back in non-recognizing download mode again.
Everything otherwise works fine once I get it into android, I can even tell it to erase all settings and factory reset, and it reboots itself, re-flashes to stock, and works fine until I power off and back on, then back to download mode.
So I guess the question is oh god what have I done?
Click to expand...
Click to collapse
I can only offer a solution to the windows connection issue, once the phone is connected to pc, go into device manager and uninstall drivers for whatever it sees, unplug phone then plug back in and windows should reinstall drivers. Worked for me, odin wouldnt see phone . GL
This will solve your speaker issue
http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1311&_nkw=samsung+i897+speaker&_sacat=0
And this should solve your download mode issue
http://forum.xda-developers.com/showthread.php?t=1300843
I'm having a similar issue where my PC does not recognize the device. Right now I have no ROM installed, I have Devil Recovery, and I can only boot into recovery and Download Mode. However 2 different PC's will not recognize the phone. I've tried multiple cables and one PC was Windows 8, one was Windows Vista. Both had the most recent drivers installed. Nothing works....any clue? I can't mount the /sdcard or USB Storage while in recovery because the PC doesn't pick up the phone. The internal storage doesn't have a ROM or kernel to flash on it neither so I cannot flash anything. I have a captivate that has Devil Recovery and can boot into download mode but will computers will not recognize the device, drivers installed or not.
Jonnyredcorn said:
I'm having a similar issue where my PC does not recognize the device. Right now I have no ROM installed, I have Devil Recovery, and I can only boot into recovery and Download Mode. However 2 different PC's will not recognize the phone. I've tried multiple cables and one PC was Windows 8, one was Windows Vista. Both had the most recent drivers installed. Nothing works....any clue? I can't mount the /sdcard or USB Storage while in recovery because the PC doesn't pick up the phone. The internal storage doesn't have a ROM or kernel to flash on it neither so I cannot flash anything. I have a captivate that has Devil Recovery and can boot into download mode but will computers will not recognize the device, drivers installed or not.
Click to expand...
Click to collapse
Have you tried to uninstall the current drivers, reboot pc and reinstall them?
Also, it could be devil kernel that is faulty. If Odin can recognize the phone, you could flash a different kernel. Or even flash stock KK4, then corn kernel and finally, the ROM you wanna flash through recovery.
I just cannot get the PC to recognize the phone at all, even in download mode. I've tried 2 pc's and multiple USB cables, samsung, non-samsung, motorola, universial. Nothing, just says USB cannot recognize this device. Reinstalled drivers on 2 pc's and rebooted several times. I am lost, I know I'm not bricked because I can access download mode and recovery. I do not have a ROM on my internal card so I can't flash a ROM and can't mount my phone to my PC. No clue what to do.
---------- Post added at 02:59 PM ---------- Previous post was at 02:10 PM ----------
I just need my PC to recognize my device and I'd be good, odin would then recognize my device in download mode and I could flash a different kernel or rom.
Try cleaning out the micro usb port of ur phone. Maybe the contacts are not making good contact.
Sent from my SAMSUNG-SGH-I777 using xda premium
Any recomendations for what to use to clean it out? I have q-tips, any special solution to use or just the q-tip?
Rubbing alcohol should do.
Sent from my SAMSUNG-SGH-I777 using xda premium
Still no luck...I got my PC at work to recognize the phone ONCE. It went through and recognized it like it normally would, however it wouldn't recognize it again. I've been trying on my PC at home all last night and all morning and still no go. It won't recognize it. Now one thing I thought about is that I am on Windows 8. The PC at work that recognized it was Windows Vista. I don't know if that has anything to do with it. I wouldn't care so much if I didn't just sell it for $150 I just wanted to give the person a more updated ROM and ended up screwing something up when flashing the ROM.
Jonnyredcorn said:
Still no luck...I got my PC at work to recognize the phone ONCE. It went through and recognized it like it normally would, however it wouldn't recognize it again. I've been trying on my PC at home all last night and all morning and still no go. It won't recognize it. Now one thing I thought about is that I am on Windows 8. The PC at work that recognized it was Windows Vista. I don't know if that has anything to do with it. I wouldn't care so much if I didn't just sell it for $150 I just wanted to give the person a more updated ROM and ended up screwing something up when flashing the ROM.
Click to expand...
Click to collapse
Ok so I know you've uninstalled and reinstalled drivers several time. But what drivers are you using and when you plug the phone into your pc what is it showing as in the device manager?
They may be exactly what you are using but I added some drivers to this post you might want to try. Just unzip then through device manager update the drivers for your device manually and point it to that folder.
I added these drivers because I'm on Win8 as well and I noticed when I was in recovery that my phone wasn't showing up correctly in the device manager. After installing these drivers it was.
Thanks I'll try that when I get home, I am using the most recent drivers on the Samsung website for the Captivate.
So I got it to boot and be recognized by my computer and I used a 1 click method with CWM and it passed so the Odin flash. So no I basically have a on rooted captivate running 2.5 gingerbread and it is totally sellablebel now. I have no idea what caused my computer to recognize it I didn't even try your drivers yet, but thanks for trying to help.
Sent from my Nexus 10 using Tapatalk 2
Well whatever happened I'm glad you got it up and running.
Sent from my SGH-I897 using xda app-developers app