Database Develop

[Q] Flashing a new Kernel

Hi everyone.
I have the teamhacksung's ICS rom (build 14) that I have installed above the onecosmic's rom.
I would like to know how I sould proceed to install THIS new kernel.
Should I just have to flash the zip in recovery mode?
Thanks

H83 said:
Hi everyone.
I have the teamhacksung's ICS rom (build 14) that I have installed above the onecosmic's rom.
I would like to know how I sould proceed to install THIS new kernel.
Should I just have to flash the zip in recovery mode?
Thanks
Click to expand...
Click to collapse
If you are flashing from another rom.
1. Reboot into recovery using button combos.
2. Flash RC3.1.
3. Reboot into recovery, wipe data / factory reset.
4. Wipe cache.
5. (optional) flash new kernel
6. Reboot.
If you are upgrading from an earlier build.
1. Flash the newest build in CWM.
If you have rebooted and your phone will not go past the kernel screen.
1. Boot into CWM and wipe data/factory reset and wipe cache partition.
2. Reflash the appropriate kernel.
3. Reboot.

H83 said:
Hi everyone.
I have the teamhacksung's ICS rom (build 14) that I have installed above the onecosmic's rom.
I would like to know how I sould proceed to install THIS new kernel.
Should I just have to flash the zip in recovery mode?
Thanks
Click to expand...
Click to collapse
If u just want to flash a new Kernel, it's not neccessary to reflash the whole ROM. Put the Kernels ZIP into internal SD-Card, go to CWM via boot or 3-Button-Combo, head to the zip-file and install it.
It could be useful, to flash the Kernel-cleaning-script that u will find here:
http://forum.xda-developers.com/showpost.php?p=13224453

[Q] Galaxy Tab: Overcome to CM9

Hi,
I have a Galaxy Tab P-1000, and some months ago I installed the Overcome 7 v.4.1.0 ROM following this guide: www .teamovercome.net/p1000/?page_id=17.
Now I'd like to install the new official CM9, but I don't know which steps I have to follow, since I don't have a stock rom anymore.
This is the guide I'm trying to follow: wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Tab_%28GSM%29:_Full_Update_Guide
Should I simply follow the steps in the "Flashing CyanogenMod" section, since I already have installed the Overcome ROM with its "Overcome CwMod Recovery version 4.1.0.9"?
Thanks

Yes, put cm9 zip and gapps zip in sdcard,
Boot to cwm recovery,
Then wipe cache, data and dalvik cache, then flash cm9 (may need to do twice) then flash gapps.
Sent from my GT-P1000 using xda app-developers app

priyana said:
Yes, put cm9 zip and gapps zip in sdcard,
Boot to cwm recovery,
Then wipe cache, data and dalvik cache, then flash cm9 (may need to do twice) then flash gapps.
Click to expand...
Click to collapse
Worked like a charm! Thank u!

[Q] Issue installing CM10 Nightly

So, it`s my first custom rom so i don't have any experience with it, so yes, i'm a noobie.
I've seen the ICS 4.0 Sources Out thread for a while and when i saw the CM10 release by arcee i decided to give it a try
but got stuck on LG boot logo.
What i did:
1. install cwm recovery v4.0.0.5
2. wipe data/factory reset
3. wipe cache partition
4. install cm-10-20121030-nightly-p990.zip (success install)
5. reboot system now
Then it get stucked at the lg logo... i can acess the cwm and try to reflash the ROM... but it'll get stuck at the same logo
Any solution?
Thanks
EDIT1: Ok, i just flashed a stock rom and it worked... now i'm on stock gingerbread 2.3.4, any tutorial to install cm10?
Thanks a lot... i just tought i bricked my phone

Javiern said:
So, it`s my first custom rom so i don't have any experience with it, so yes, i'm a noobie.
I've seen the ICS 4.0 Sources Out thread for a while and when i saw the CM10 release by arcee i decided to give it a try
but got stuck on LG boot logo.
What i did:
1. install cwm recovery v4.0.0.5
2. wipe data/factory reset
3. wipe cache partition
4. install cm-10-20121030-nightly-p990.zip (sucess install)
5. reboot system now
Then it get stucked at the lg logo... i can acess the cwm and try to reflash the ROM... but it'll get stuck at the same logo
Any solution?
Thanks
Thanks
Click to expand...
Click to collapse
Wipe system also then try.
Sent from my LG-P999

how?
cricketAC said:
Wipe system also then try.
Sent from my LG-P999
Click to expand...
Click to collapse
How i do that? i don't see that option on cwm recovery
"
-reboot system now
-apply update from sdcard
-wipe data/factory reset (that's the one i used)
-wipe cache partition
-install zip from sdcard
-backup and restore
-mounts and storage
-advanced
-power off
-go back
"
EDIT1: I tried to format /system but it says "unable to mount"... mount doesn't work either
EDIT2: Backup file it isn't working... totally f***** up

1: wipe data/factory reset
2: wipe cache
3: advanced>wipe dalvik cache
4: mounts n storage>format data, format cache n format system
this is what is meant by full wipe
5: install CM10
6: install latest gapps package for jb
7: reboot system
this should work

Hey,
This helped for me: (no bugs for now)
-Nvflash to original GB rom from lg
-rooted the device
-installed cwm
-flash cm7 (latest nightly as recommended fom ricardo for the bootloader etc)
-installed gb gapps
-installed first cm10 nightly
everything workes fine so far
I came from the cm9 paranoid build
I also wasstuck at the logo both with cm7 and 10
hope it'll help you
Sent from my LG-P990 using xda app-developers app

zxr72 said:
Hey,
This helped for me: (no bugs for now)
-Nvflash to original GB rom from lg
-rooted the device
-installed cwm
-flash cm7 (latest nightly as recommended fom ricardo for the bootloader etc)
-installed gb gapps
-installed first cm10 nightly
everything workes fine so far
I came from the cm9 paranoid build
I also wasstuck at the logo both with cm7 and 10
hope it'll help you
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
I just did almost the same thing, just didn't flash cm7
working now... CM10 is soooo smooth
any bug? i don't get the vibration bug, clock FC or the non see External SD
all is working great... wow
Thanks for the help

What am I doing wrong?
Hi!
I never used CM7 or any custom rom.
I had 20s flashed via kdz.
I'm root. I installed ClockWorkMod recovery 4.0.0.5 and made clean cache, wipe dalvik etc.
I installed CM10 from zip (it only took a few seconds!) and rebooted. It showed two LG logos and never passed that.
I kept reading and saw this thread so I used smartflash to go back to FROYO, rooted, installed CWM and installed the last CM7 nightly (only a few seconds!) and rebooted.
All I get is a static LG logo and nothing else. I don't know what to do!
Thanks and sorry about my english!

1. NvFlash to 10b
2. Smart flash to latest stock ROM for your country
3. Rooted
4. Install ROM manager
5. After install ROM manager, open it
6. Install CWM v.6 through ROM manager
7. Boot into recovery
8. Wipe data, wipe cache, wipe dalvik-cache, wipe battery stats
9. Install latest cm10 nightly through install zip from SD card
10. Install gapss through install zip from sd card
Sent from my LG-P990 using xda app-developers app

ardiade said:
1. NvFlash to 10b
2. Smart flash to latest stock ROM for your country
3. Rooted
4. Install ROM manager
5. After install ROM manager, open it
6. Install CWM v.6 through ROM manager
7. Boot into recovery
8. Wipe data, wipe cache, wipe dalvik-cache, wipe battery stats
9. Install latest cm10 nightly through install zip from SD card
10. Install gapss through install zip from sd card
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
How do I install Nvflash? I have found tutorials for it but they are for the g2x. Will it still work?

I bought an o2x to replace my sgs1 which is great with cm10.
My story:
Phone was used and bone stock with froyo and 725bb
Rooted
Installed rom manager then flashed cwm 6.0.1.5 from rom manager
wiped everything
installed latest CM7
usb mass storage stopped working (was working with stock froyo)
copied latest cm10 nightly and gapps to an sdcard
wiped again
flashed cm10 and gapps
now I'M stuck on cyanogenmod logo and the lower buttons are lightning
repeated the process few times and still stucked at cm logo
Any ideas? Thanks!
*Update* Removed the battery and restarted the phone and now it seems to be working!

[Q] help for flash cm10.1

from stock ics n already rooted. now i want flash cm10.1, i already download cm10.1 n7000 nightly, gapps 20130301, n cm kernel 10.1.
for flash cwm recovery i want to flash via rom manager app, its safe?
if it working flash cwm recovery form rom manager apk, whats step for flash cm10.1?
how if i backup first current rom via cwm recovery?
reboot to cwm recovery-flash cm10.1 kernel-reboot recovery-clean data-flash rom-flash gapps-reboot.
that is right?
please help....thanks
sory for my bad english

Download Philz Kernel that corresponds to your version of ICS. Put the zip file onto your external SD card.
Turn your phone off, then turn it on by pressing and holding 3 buttons at once: Volume up, power button and home button
Once you are in the recovery, install Philz kernel from sd card. Once that is done reboot, turn the phone off. Go into recovery with the same 3 keys.
From the safe recovery, do the following:
wipe data/factory reset
wipe cache
advanced => wipe dalvik cache
mounts and storage => format /system and then format/preload
After you have done those step:
Install zip from sd card => from internal/external (pick) and select the cm10.1 nightly zip
Once that has finished Install gapps
Then do a data wip/factory reset
No need to flash the cm10.1 kernel you posted about because when you flash a ROM then it flashes a new kernel too

I agree with the abovementioned instruction. Just one part may be critical. If you're using PhilZ kernel prior to (lower than) Version 3.99, you'll end up with a Status 7 error message saying installation aborted.
IMHO downloading a CM10.1 kernel and putting it on root of the internal SD does no harm.
If you'll end up with a Status 7 error message, you could just flash CM10.1 kernel and go to advanced within CWM and choose reboot to recovery.
Then, from CM10.1 kernel's CWM recovery you'll be able to install CM ROM and GApps easily. Doing a wipe data etc.

AA1973 said:
I agree with the abovementioned instruction. Just one part may be critical. If you're using PhilZ kernel prior to (lower than) Version 3.99, you'll end up with a Status 7 error message saying installation aborted.
IMHO downloading a CM10.1 kernel and putting it on root of the internal SD does no harm.
If you'll end up with a Status 7 error message, you could just flash CM10.1 kernel and go to advanced within CWM and choose reboot to recovery.
Then, from CM10.1 kernel's CWM recovery you'll be able to install CM ROM and GApps easily. Doing a wipe data etc.
Click to expand...
Click to collapse
i already in CM10.1 rom without any problem, using flash philz kernel. but i lose some app stock N7000 like keyboard n stock note. where i can find it. can you show me some thread that post stock N7000 apk.

Help with flashing philz kernel and custom rom

Hi, I need some help - I want to flash my Note to Liquid Smooth 2.2 rom, so please tell me if I'm thinking properly.
1) My note have stock 4.1.2 rom XXLSA, so I need to flash letest Philz kernel from stock recovery, with is "PhilZ-cwm6-XXLSA-DBT-3.99-signed"
2) Do full backup, and flash latest CM10.1 kernel ("Kernel_CM10.1_Official_20130403_n7000_N8Mali"), reboot recovery into CM cwm
3) Full wipe - wipe data, cache, dalvik-cache
4) install rom zip and next gapps, reboot
Is everything as it should be? And what is N8Mali in cm10.1 name? There are a lot of kernel, so I don't know if this will be ok for me. Thanks for help, and sory for my stupid questions... but I really like to know if I'm doing everything in good way.

You don't need to flash the cm kernel after you flashed the philz kernel.
Sent from my GT-N7000 using Tapatalk 2

I have read somwhere that It is safer to flash from cm kernel, because flashing from philz sometimes goes wrong. But thanks for answer, thats easier without it

So I have another stupid question - If I want to go back to stock android in future, can I just reboot to cm recovery and restore backup of stock rom? Or I have to firstly flash philz kernel to restore?

sinedoOo said:
So I have another stupid question - If I want to go back to stock android in future, can I just reboot to cm recovery and restore backup of stock rom? Or I have to firstly flash philz kernel to restore?
Click to expand...
Click to collapse
Restoring backup in CWM (CM version) will be just fine. Thou, you can flash philz kernel first...but it is not necessary.

So first of all you are on XXLSA and want to flash Liquid smooth 2.2 so here are the steps :
1. download philz kernel for xxlsa .tar from here http://www.mediafire.com/file/wxqlp64nu6s7v66/PhilZ-cwm6-XXLSA-DBT-3.99.tar.md5
2. download odin from here and extract it http://forum.xda-developers.com/showthread.php?t=2189539
3. open odin and click on PDA and insert the .tar Philz Kernel in
4. Go in to download mode with pressing Home+Volume Down+Power
5. Connect your phone with your Computer now odin should say "Added" and click START
6. after flashing the kernel disconnect your phone and let your phone boot it will take some mins
NOW YOU GOT ROOT AND CWM
7. the next step is that you put the liquid smooth 2.2 file and the gapps file in your phone storage
8. open CWM = volume up+home+power
9. Wipe everything
10. go to install zip from sd card after that from internal storage
11. now go to the liquid smooth file and flash it
12. after the liquid smooth file flash the gapps file
13. now reboot !
YOU ARE DONE !!!

i have one suggestion
Format /system, /data, preload (in mount and storage option) after doing wipes .
he need to flash cm kernel for flashing 4.2.2 aosp roms. in philz kernel cm 10.1 base rom installation will fail.
---------- Post added at 12:29 AM ---------- Previous post was at 12:17 AM ----------
Step by step Procedure
1. Flash Philz kernel from Stock recovery
2. Do full backup (backup all apps, sms, contacts etc)
3. Reboot recovery
4. Do a CWM backup
5. Do flash CM Kernel a cm kernel
6. Do wipe data, dalvik-cache
7. Do Format /system, /data, /preload
8. Do wipe cache partition
9. Do flash Liquid smooth rom & Flash Gapps for 4.2.2
Now reboot Phone, All Done. Enjoy new Rom :good::good: