[Q&A] [UNBRICK] HTC Unbricking Project - HTC Vivid, Raider, Velocity

[Q&A] [UNBRICK] HTC Unbricking Project - HTC Vivid, Raider, Velocity

Q&A for [UNBRICK] HTC Unbricking Project
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [UNBRICK] HTC Unbricking Project. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Hi there,
so I have managed some how (I don`t know how) to brick my htc one sv. I was moving TWRP folder with backup files from PC to phone internal storage, got ext4 error, and phone just died... no lights on charge, no bootloader, nothing.......
When I reconnect USB it is detected as QHSUSB_DLOAD device, so that indicates that there is no more bootloader... I was reading that this is fixable (without jtag box), there was explanations how to do it for sensation, and M7, but there is nothing for ONE sv...
Can U help me with advice??? How to get bootloader back on rolling??? I was on 4.2.2.
THX in advance!!!

Bricked htc vivid stuck on white screen
i unlocked the bootloader with unlocker v2 by Fenguepay after that it was partially rooted so after that i rebooted and everything was fine then i tried to flash rom with cm-11-20140628-unofficial-pyramid.zip and gapps it didnt go tru, so i downloaded yet another rom: resurrection remix - kk- v5. 1.2-20140521-holiday.zip and pa gapps modular mini 4.4.2-20131230-signed.zip yet it got stuck on d htc white screen. That was when i used vivid all in one kit v3.0 to relock so i could try flahing factory RUU but no way. i flashed it by entring h boot den got into recovery and wiped cache,davik and data and i also did factory reset before flashing it with the above mentioned roms and gapps. please someone should help me. i have read and read and read till i am now confused.
your time is highly appreciated.

Passionate appeal
kingsolo said:
i unlocked the bootloader with unlocker v2 by Fenguepay after that it was partially rooted so after that i rebooted and everything was fine then i tried to flash rom with cm-11-20140628-unofficial-pyramid.zip and gapps it didnt go tru, so i downloaded yet another rom: resurrection remix - kk- v5. 1.2-20140521-holiday.zip and pa gapps modular mini 4.4.2-20131230-signed.zip yet it got stuck on d htc white screen. That was when i used vivid all in one kit v3.0 to relock so i could try flahing factory RUU but no way. i flashed it by entring h boot den got into recovery and wiped cache,davik and data and i also did factory reset before flashing it with the above mentioned roms and gapps. please someone should help me. i have read and read and read till i am now confused.
your time is highly appreciated.
Click to expand...
Click to collapse
i tried using flashing ruu with this Gingerbread_De-Sensified_v0.2 using alli in kit by hasoon 2000 and got this error text
sending 'zip' (203059 KB)...
OKAY [ 20.431s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 25.222s
pls help
C:\Users\user\Desktop\Vivid_All-In-One_Kit_v3.0\data>
---------- Post added at 02:46 AM ---------- Previous post was at 02:41 AM ----------
I know you can help me. I was told that once i post my htc vivd brick issue here, i did get a solution, pls help me solve this nightmare. I have not slept for close to a week now searching forums and reading but to no avail. Thanks for your time

hi, my phone (HTC one s4 z560e) with error qhusb_dload. When you delete a photo depends after which he was forced off. Then began a constant reboot . after turning off the phone shows error qhusb_dload. in ubuntu did fix (PblClear.zip -http: //unlimited.io) start up the phone and then started constantly rebooting .
I stopped fastboot then install the firmware manages RUU. program issued that now run android. Phone is turned off and began again to reboot . in android is not included. If you turn off the phone , he gets back mode qhusb_dload.
What could be the reason !?!
Sorry for my english

htc raider bricked help
when i perform the command line ./brickdetect.sh it tells me 'the bricked device is on Use the above node to perform operations using the emmc_recover tool' but no such thing like sdb. i have removed the usb cable several times and restarted ubuntu 14.04 as well. when i plug in the usb i see a small red light. when i plug it into windows 8 with battery in phone it detects qhsusb_dload and charging lights comes for some few seconds and at other times flashes. phone screen doesn't light.
what happened was that ruu landed me in bootloop. i read a couple of tutorials and i found that what i could do was to unlock and install cmw. unlock was successful. guide to installing recovery.img was also well but when i go to hboot and choose install zip from sd nothing appears . when i press on-key it goes back to the cwm. so i tried reinstalling recovery.img if could this time read the sd to install the .zip and it got stacked. nothing was happening for about 15min i removed the usb and the battery and couldn't switch-on again. please every help is appreciated.

HTC Unbricking - 8X
I would like to know if the procedure will work with HTC Windows Phone 8X which does not have a removable battery?
Thanks

Bricked HTC 8X Windows Phone
Dexter93,
How do I use your method to unbrick HTC 8X which has a non-removable battery?
[email protected]
Thanks

Suddenly
Is possible to unbrick it, if script not showing partition?
Device died very suddenly... Just charging it for 15-20 minutes and it turned off.
Tried to turn on, but only two times it showed HTC logo and after it doing nothing. Tried to replace battery for another one - no luck. Just turning on with black screen and nothing more.
In devs it shows as COM device "Qualcomm HS-USB QDLoader 9008".

Related

[Q] Help! - Bricked Incredible S, S-ON, unable to boot past HTC logo

Hi guys,
what I have:
Optus (AU) HTC Incredible S - it was running 2.3.3 fine, no hacks/root or anything has been done to it. [I've done a vol down + power button hboot thingy and it says S-ON]
what happened:
I connected the phone to a WIFI network to update my apps, it started updating many apps. mid-way through the updates, the phone became unresponsive and apparently hung, left it alone for a few hours, it remained hung.
I disconnected the power and pulled the battery.
The phone has since refused to boot past the HTC splash logo.
What I've tried:
I've tried rooting the phone with Revolutionary - however I can't complete the steps as I am unable to boot the phone.
I've tried Hboot with the [PG32IMG.zip] file - nothing seemed to change
I've tried usb fastboot with adb and fastboot - Signature verification failed [well, it is S-ON]
I've tried recovery - failed, gave me 3 arrows, 2 in a circular pattern and one straight, followed by a phone icon and a red triangle and ! mark
I've tried running the RUU.exe file for 2.3.3 optus, but it does not get past 'rebooting to bootloader'
Current situation:
I've spent around 6 hours trying to figure out what went wrong and make it work ... but nothing seems to work ... so guys ... i really could use some help ...
btw, I can't warranty it as I purchased the phone in Australia, but now am in Singapore ... I'll be returning to Australia in January though ...
All help and suggestions will be greatly appreciated ...
Thanks!

hey buddy
well , the easy way to solve your problem is to download the stock rom for your device , and install it using the offical HTC exe ( the rom exe ) .
it will do it all and get your device like brand new .
hope this solve it .

If the above doesn't work send it to any htc repair center. You have to pay but whatever.

hassanhm said:
hey buddy
well , the easy way to solve your problem is to download the stock rom for your device , and install it using the offical HTC exe ( the rom exe ) .
it will do it all and get your device like brand new .
hope this solve it .
Click to expand...
Click to collapse
Hey hassanhm,
thanks for the reply. I've tried searching the HTC official website for the stock rom, however it is not available for download due to the fact that firmware upgrades are now over the air ..
i've downloaded the RUU rom by optus (RUU_Vivo_Gingerbread_S_Optus_AU_2.12.980.2_R_Radio _20.2803.30.085AU_3805.04.03.12_M_release_185028_s igned
http://www.filefactory.com/file/cfdd...028_signed.exe) found here - http://forum.xda-developers.com/showthread.php?t=1033922 - however it just gets stuck on the booting to bootloader step ...
if there a different stock rom exe file i should be using?
Thanks!

I'm a singaporean. Its uncommon to see this kinda stuff :/

looks like dead motherboard i saw thing like that already

I'm from Singapore. I had this issue, spent a day flashing and rebooting to try and fix it. Then I have up and just flashed an official ROM, I think any one will do, then sent it to HTC. It was still s-off but they didn't care. Took just 3 days and they sent it back, fixed and like brand new. I suggest you don't waste time and just sent to HTC. it will come back s-on but you can just root it again.
Hope this helps!
Sent from my HTC Incredible S using XDA App

There's one but when they put latest Hboot (1.16.0000)then it's harder to flash ROM than 1.13.0000. Hope you get your phone back and it's working

expiredyoghurt said:
Hi guys,
what I have:
Optus (AU) HTC Incredible S - it was running 2.3.3 fine, no hacks/root or anything has been done to it. [I've done a vol down + power button hboot thingy and it says S-ON]
what happened:
I connected the phone to a WIFI network to update my apps, it started updating many apps. mid-way through the updates, the phone became unresponsive and apparently hung, left it alone for a few hours, it remained hung.
I disconnected the power and pulled the battery.
The phone has since refused to boot past the HTC splash logo.
Click to expand...
Click to collapse
You must be able to revive, since you did not do anything related to s-off, rooting etc. rooting, s-offing are for modding addict fellow
[/QUOTE]
What I've tried:
I've tried rooting the phone with Revolutionary - however I can't complete the steps as I am unable to boot the phone.
[/QUOTE]
Revolutionary only work on phone with NORMAL BOOTING (Android booting). If you did on fastboot then (I Think) you start create big trouble
I've tried Hboot with the [PG32IMG.zip] file - nothing seemed to change
Click to expand...
Click to collapse
This will only work for UPDATE, mean you must use higher version of ROM than in the phone (if you are s-on) -CMIIW-
I've tried usb fastboot with adb and fastboot - Signature verification failed [well, it is S-ON]
I've tried recovery - failed, gave me 3 arrows, 2 in a circular pattern and one straight, followed by a phone icon and a red triangle and ! mark
I've tried running the RUU.exe file for 2.3.3 optus, but it does not get past 'rebooting to bootloader'
Current situation:
I've spent around 6 hours trying to figure out what went wrong and make it work ... but nothing seems to work ... so guys ... i really could use some help ...
Click to expand...
Click to collapse
can you post your mainver : FYI, I could NOT resolve my vivo since my situation is worse than you, but probably my experience with unsuccesfull result will give different output ... who knows.
on fastboot (I'm sure You know how to do) fastboot getvar all (windows command) and post the output for our analysing together and help each other.
btw, I can't warranty it as I purchased the phone in Australia, but now am in Singapore ... I'll be returning to Australia in January though ...
All help and suggestions will be greatly appreciated ...
Thanks!
Click to expand...
Click to collapse
You will loss a big FUN on your life !!! by choosing easy way.

i have the same problem with a unit of incredible s. will not continue booting up past the htc logo.
Is this a software problem? cause im thinking maybe its the motherboard.

ice_pick88 said:
i have the same problem with a unit of incredible s. will not continue booting up past the htc logo.
Is this a software problem? cause im thinking maybe its the motherboard
Click to expand...
Click to collapse
.
what did you do before stuck. Can you boot into bootloader (?) are you S-ON or S-OFF (?) what is Hboot version do you have. To have bootloader state : press power and volume down button SIMULTANEOUSLY if within TEN MINUTES you do not have bootloader status you should stop and let us know here

Thanks for the reply. Its S-On, Hboot 1.13, I was simply browsing using the phone when it restarted and stuck with the htc logo.

ice_pick88 said:
Thanks for the reply. Its S-On, Hboot 1.13, I was simply browsing using the phone when it restarted and stuck with the htc logo.
Click to expand...
Click to collapse
I'm wondering. You probably did not enable fastboot option > setting > power > UNTHICK fastboot item.
On your today phone state you can not do it. Do you remember ? you enable fastboot option or not. Presumed you enable fastboot option then you can go to bootloader by pressing power and volume down buttons simultaneously > once you come into bootloader there is an option FACTORY RESET. If you see RED TRIANGLE. No other choice (AFAIK) you need to download the RUU of your phone and just run RUU ... all your personal user data will be wiped.

x1123 said:
I'm wondering. You probably did not enable fastboot option > setting > power > UNTHICK fastboot item.
On your today phone state you can not do it. Do you remember ? you enable fastboot option or not. Presumed you enable fastboot option then you can go to bootloader by pressing power and volume down buttons simultaneously > once you come into bootloader there is an option FACTORY RESET. If you see RED TRIANGLE. No other choice (AFAIK) you need to download the RUU of your phone and just run RUU ... all your personal user data will be wiped.
Click to expand...
Click to collapse
Thanks again for the reply. when i choose the factory reset the phone hangs but when i select recovery it goes to the red triangle logo. Where and how can i know whats RUU of my phone? Sorry im literally a noob.

3 days ago, i was having the same problen but i could solve it
Here what you can do:
1. Eject your sd card and insert another android phone. You can create a gold card over another android phone (Making gold card is completely independent from android version or phone model. Trust me.). You can search the forum, there are a lot of guides for making a gold card.
2. Boot into fastboot, plug your usb cable. Open a windows console, and send that command:
Fastboot getvar mainver
It will tell you your mainver.
3. Go here: http://forum.xda-developers.co m/showthread.php?t=1359555 .
In there, you can find original rom list. Choose one which has higher mainver than yours then download it. The thread also explains how to install the original rom.
Hth.
-R

programci_84 said:
3 days ago, i was having the same problen but i could solve it
Here what you can do:
1. Eject your sd card and insert another android phone. You can create a gold card over another android phone (Making gold card is completely independent from android version or phone model. Trust me.). You can search the forum, there are a lot of guides for making a gold card.
2. Boot into fastboot, plug your usb cable. Open a windows console, and send that command:
Fastboot getvar mainver
It will tell you your mainver.
3. Go here: http://forum.xda-developers.co m/showthread.php?t=1359555 .
In there, you can find original rom list. Choose one which has higher mainver than yours then download it. The thread also explains how to install the original rom.
Hth.
-R
Click to expand...
Click to collapse
Just for additional info. If you can not find another android/windows phone to get sdcard CID (you have only one phone and now in trouble). You can use any laptop with Built In card reader at PCI slot and NOT USB STORAGE if you were not have BOTH ... it's time to ask help your neighbour or your friends

Unlock bootloader through htcdev.com (phone doesn't have to boot normally to do this and it remains S-ON)
Flash clockwork recovery
Do arhd wipe
Flash any rom you want
flash the boot.img of that rom
there done

fallenwout said:
Unlock bootloader through htcdev.com (phone doesn't have to boot normally to do this and it remains S-ON)
Flash clockwork recovery
Do arhd wipe
Flash any rom you want
flash the boot.img of that rom
there done
Click to expand...
Click to collapse
Good day,
Thanks for the replies. Im having problem with this step. Im doing the unlocking the bootloader of the phone but when im in the process of inputting the cmd command "fastboot oem get_identifier_token" it gets me the " <waiting for device>
I have installed the latest htc sync version and updated all the drivers but it looks like my pc doesnt detect the incredible s.
Need suggestion guys.
Ill try the Gold card step later maybe it will work.
Thanks again.

Help save my phone! :(

Hi people
Yesteday i bough a LG 4X and i wanted to put CM 10 on it.
I followed the normal instructions, but something went terrible wrong.
My can't get passed the loading LG logo now, and when i try to go to recovery i tells me the following.
ELGE_SECURITY3 ERROR: boot image signature
Critical failure: Unable to start kernel.
Unrecoverable bootloader error (0x0000002).
I have tried this guide:
http://forum.xda-developers.com/showthread.php?t=1861854
and this:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7&nocache=1&z=6539526249427472
I both cases i starts off well but then the USB suddenly wont reconize my phone and the screen turns gray.
Can anybody help !?!?!

install proper usb drivers , lg mobile support tool
try inserting the usb with pulled battery while holding vol down, after you accesd the download mode reinsert battery and follow one of the above guides. try it multiple times if you cant acces the download mode at the forst time
Sent from my LG-P880 using xda app-developers app

You didn't unlock a bootloader but you've installed custom recovery.
Use a KDZ to flash stock ROM.

kaad87 said:
Hi people
Yesteday i bough a LG 4X and i wanted to put CM 10 on it.
I followed the normal instructions, but something went terrible wrong.
My can't get passed the loading LG logo now, and when i try to go to recovery i tells me the following.
ELGE_SECURITY3 ERROR: boot image signature
Critical failure: Unable to start kernel.
Unrecoverable bootloader error (0x0000002).
I have tried this guide:
http://forum.xda-developers.com/showthread.php?t=1861854
and this:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7&nocache=1&z=6539526249427472
I both cases i starts off well but then the USB suddenly wont reconize my phone and the screen turns gray.
Can anybody help !?!?!
Click to expand...
Click to collapse
thats the problem now. 3 months ago that i wanted to unlock the bootloader , i just typed : adb drivers and got them. now if u search for adb drivers u will find a million posts that say nothing, because no one searches. since 3 months ive seen at least more 20 posts about unlocking the bootloader......... anyway. go download android sdk , the 32 bit version even if u r on windows x64. install , run, update it. u will get the drivers right. after that u can easily unlock the bootloader and install team win recovery or cyanogen recovery. use the all in one toolkit of afro. thats all.

[Q] Possibly Bricked HTC One M7... HELP!

Hi,
This is my first time to create an account and or post on XDA, so I appolagize if my question is somewhere else, or if this is the wrong section...
I have a T-Mobile HTC One M7. I flashed the Google Edition RUU to try it out. I then flashed just the firmware back and was going to restore a TWRP Backup. After I issued the command fastboot flash zip firmware.zip twice, I entered the command fastboot reboot-bootloader. The screen then turned black and won't turn on. The phone seems completely unresponsive. It won't boot to an OS, or Bootloader. No HTC logo on the screen. If I plug the phone in, nothing happens. No charging light or anything. I surrely thought I actually Bricked it, but it appears to be reconized by Windows. If I hold down the power button for so long, the light won't blink, but the computer makes a device disconnected sound shortly followed by a connect sound. I went ahead and connected it to a Linux machine, and the OS sees 6 different partitions / removable media. I am able to browse what appears to be the root, system, recovery...
It is S-OFF via firewater and the firmware I flashed has hboot 1.57.0000. The bootloader is unlocked. The device is not seen by adb nor fastboot.
Does anyone think I have any chance of recoverying it?

Yes it's dead, try this http://forum.xda-developers.com/showthread.php?t=2770684
[UNBRICK][BETA] HTC Unbricking Project
If not, then JTAG.

That worked. Thank you very much SaHiLzZ.

AndroidBrick said:
That worked. Thank you very much SaHiLzZ.
Click to expand...
Click to collapse
Excellent

nexus toolkit fastboot device not found

My nexus 6 got stuck in a bootloop. It died while updating to 6.01 now is stuck at the google logo. I was trying to use Nexus root toolkit to flash stuck android back onto the device however I keep getting the error "fastboot device not found". It has a list of fixes however all of them need me to boot fully into android which I cannot since its stuck in a bootloop. My computer recognizes the phone while its charging as a "android" and when I boot in to recovery as "fastboot shamu S" however it has a yellow exclamation point and says needs trouble shooting. Trouble shooting comes back with nothing. Any help welcome thanks!

Bump

this may help
http://forum.xda-developers.com/nexus-6/general/to-save-bricked-nexus-device-t3334660

Hey thanks I was able to get nexus toolkit to recognize the phone as a fastboot by manually downloading and install the drivers from google. However I ran into another issue. My bootloader is locked. And I do not have usb debugging enabled so I can not use the toolkit or abd to unlock the bootloader. Any ideas?

I answered you in your other thread. Here I just wanted to give you a tip: It's considered bad form to bump your own thread so short after creation. Also, against the forum rules... If you're impatient, spend the time until someone answers searching for the answer. Who knows, you might find it yourself...

Phone in Hard Brick mode

I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?

You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room

Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0

when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?

It worked, but how did you know all this? Just spot on :good:

I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!

Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress

Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?

Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9

dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!

htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?

I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.

Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc

Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs

Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.

Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?

Database Develop

welcome