Database Develop

GT-I9305 - I can't flash any stock samsung roms

Hay gays.
I buy samsung galaxy s3 lte but phone stuck in bootlop (can't go to download mode and recovery mode) well i buy JIG and work but now i
can't flash any stock samsung rom
odin shows me :
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:157)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDowanload.
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What does this mean ?

Ask a moderator to move your post to the q&a section for the i9305 for an answer.

pleps123 said:
Hay gays.
I buy samsung galaxy s3 lte and phone stuck in bootlop (can't go to download mode and recovery mode) well i buy JIG and work but now i
can't flash any stock samsung rom
odin shows me :
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:157)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDowanload.
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What does this mean ?
Click to expand...
Click to collapse
what are the roms that you tried to install with odin?
what is the installed rom in your device?

"what are the roms that you tried to install with odin?"
I tried flash stock 4.4.4 xeo ,4.3,4.1.2 for GT-I9305
"what is the installed rom in your device?"
I do not know , but probably stock 4.4.4 because from what I see in download mode ,I have knox bootloader.

Try pit file with 4.4.4 stock Ron.

Unfortunately it did not help

Try with mobile Odin pro

I tried using Heimdall but program shows me this error :
Failed to access device. libusb error: -12

pleps123 said:
I tried using Heimdall but program shows me this error :
Failed to access device. libusb error: -12
Click to expand...
Click to collapse
If you have Knox Bootloader you can not go down to 4.1.2 Jellybean.
Choose a Sammy based original Firmware 4.3 or 4.4.
Can you got to Recovery Mode?

I had your same problem
Try to install PHILZZ recovery with odin
then go to mount and storage
select mount usb storage (you must have an sd card inside phone)
connect to your computer
put sammy rom or similar (it take some time) try not to touch usb cable
when finished flash rom!!!!!!!!

[Q] Root Problem

Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.

maybe this will help
GabrielAK89 said:
Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
Click to expand...
Click to collapse
Hi
did you already try to get back to 100% stock ROM??
-
-
i can not yet post links but if you google "galaxy s stock rom" and than the first link.

take a look here for the stock ROMS
http://www.sammobile.com/firmwares/database/GT-I9000/

it warked with another version...strange thow.
Thx.
I will try now to put again the 4.4.x

Root failure

So I have messed up somewhere along the way. I have a T-Mobile sm-t817t. Tablet only boots to "an error has occurred while updating the device software". I cannot get my odin v3 10.7 to see the Tab_S2_t817T_boot.zip file. So I tried to flash the Permissive Lollipop 5.1.1, t810_5.1.1_boot. Now tablet only boots to error. I can get into download mode. I tried to flash the [RECOVERY] TWRP 2.8.7.x Lollipop 5.0.2/5.1.1 - SMT810/T710 but write always fails. Error on tablet is "Custom Binary blocked by FRP". Is there anyway to recover from this? I have not tripped knox as far as I can tell, it's still at 0.

Well first of you tried to flash a zip in Odin which is impossible it needs to be flashed with twrp then you flashed a t810 kernel on a t817 device.
You need to download and flash the stock t817 firmware then disable frp lock aka OEM unlock in settings.

Thanks for the reply, I tried to flash TMB-T817TUVU1AOG8-20151020225336 but now get a new error "sw rev. check fail device 2 binary 1". Am I trying to flash the wrong file or something?

instanoodle said:
Thanks for the reply, I tried to flash TMB-T817TUVU1AOG8-20151020225336 but now get a new error "sw rev. check fail device 2 binary 1". Am I trying to flash the wrong file or something?
Click to expand...
Click to collapse
Where do you see this error odin or the device?
Have you extracted the md5 from the zip and loaded into the AP slot?
Does it pass the md5 hash check?

The error is on the device, "sw rev. check fail device 2 binary 1"
Tar file extracted and mounted in Odin normally.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Try flashing the OJ3 firmware, downgrade may be blocked.

ashyx said:
Try flashing the OJ3 firmware, downgrade may be blocked.
Click to expand...
Click to collapse
Where is that OJ3 Firmware?
I have the same problem.

mrch0x said:
Where is that OJ3 Firmware?
I have the same problem.
Click to expand...
Click to collapse
SamMobile

ashyx said:
SamMobile
Click to expand...
Click to collapse
I see OH7 and OJ4 but no sign of OJ3...
Sent from my SM-T710 using Tapatalk

mrch0x said:
I see OH7 and OJ4 but no sign of OJ3...
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
It's there. Just download oj4

N900A Complicated hard brick help.

My phone is SM-N900A
First of all, I didn't know that it was rooted then when I downloaded the latest updates it was un-rooted.
Because I'm ignorant and didn't know what to do, I tried re-rooting it via KINGO. But, it always fail at 90%
I always get this problem in my ODIN SW REV CHECH FAIL : [sbl1]Fused 2 > Binary 1
The next thing I did was skipped the procedure and tried rooting it thus, resulting to my phone being hard bricked.
Afterwards, I downloaded the stock rom for my phone so that I could try un-bricking it.
However, when I try to flash it with stock rom It kept failing and getting the same results ODIN SW REV CHECH FAIL : [sbl1]Fused 2 > Binary 1
So, what should I do now? I really love this phone and I want to unbrick it then re-root it again.
Would you guys help me in this complicated failure of mine.
Here's the Odin text:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

What ROM was on your phone before flashing? Did you confirm the model # in download mode?

audit13 said:
What ROM was on your phone before flashing? Did you confirm the model # in download mode?
Click to expand...
Click to collapse
My ROM was for N900A Android 5.0
Model # do you mean the product name? If it is, it says SM-N900A.
ODIN MODE
PRODUCT NAME: SM-N900A
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
SECURE DOWNLOAD : ENABLE
UDC START
This what it says in Odin mode

Did you try using different USB cables and all available USB ports?

audit13 said:
Did you try using different USB cables and all available USB ports?
Click to expand...
Click to collapse
I'll try using different cable and ports.
But, if it still didn't work, what do you think its problem?
Can it be fixed?
* I tried every usb ports and cable I have, it is 5 to be exact but I still get the same results.

Did you get the ROM from samsung-updates.com or sammobile.com? It's the latest ROM for the phone?

audit13 said:
Did you get the ROM from samsung-updates.com or sammobile.com? It's the latest ROM for the phone?
Click to expand...
Click to collapse
It's the latest ROM Android 5.0

The latest ROM I see for the sm-n900a is only 4.3: http://www.sammobile.com/firmwares/database/SM-N900A/

ODIN flash fails __XmitData_Write

Hello again,
It's isn't my day today...
after few problems, I tried to flash via ODIN(3.13.1 and 14) and I get this error:
<ID:0/005> recovery.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried many times without success
The phone hand in the "emergency recovery" screen
Firmware:
DBT-G975FXXS4BTB3
What can I do?
Midyr

Just load all BL, AP, CP and Home_CSC back into the latest verison odin and it should continue flashing the firmware

Maybe FRP triggered? Did you remve your Google account before flashing?