Hello again,
It's isn't my day today...
after few problems, I tried to flash via ODIN(3.13.1 and 14) and I get this error:
<ID:0/005> recovery.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried many times without success
The phone hand in the "emergency recovery" screen
Firmware:
DBT-G975FXXS4BTB3
What can I do?
Midyr
Just load all BL, AP, CP and Home_CSC back into the latest verison odin and it should continue flashing the firmware
Maybe FRP triggered? Did you remve your Google account before flashing?
Related
I have the device s3 mini i8190. Ordered a device from abroad CSC was Unlocked. Now flashed the modem through the CWM and now he turns 3 seconds. hanging inscription Samsung Mini i8190 and reboots constantly. He is now in the CWM comes and mode dowloading it too. Odin stitched single-file firmware but no result so sews through CWM on кастомы but also without result. PARAM_I8190 and WIPE_I8190 not help. Service firmware from the pit file not stitched and issues
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
odenhal said:
I have the device s3 mini i8190. Ordered a device from abroad CSC was Unlocked. Now flashed the modem through the CWM and now he turns 3 seconds. hanging inscription Samsung Mini i8190 and reboots constantly. He is now in the CWM comes and mode dowloading it too. Odin stitched single-file firmware but no result so sews through CWM on кастомы but also without result. PARAM_I8190 and WIPE_I8190 not help. Service firmware from the pit file not stitched and issues
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This you manage to solve it?
I have the same error from ODIN3 3.07, though the phone is booting.
I had also a few problems with Odin3 3.07.
Using version 1.85 solved it for me.
Perhaps you give it a try...:fingers-crossed:
Hello everyone,
I have a stock ANJ7 Rom that I rooted via chainfire/ODin method with no issues. Now I am trying to flash the TWRP recovery via Odin ( using PDA line in odin) and I am getting an error.
This is what Odin says:
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> RQT_CLOSE !!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the device screen, it says SECURE CHECK FAIL: recovery.
What am I doing wrong?
Android_Guy said:
Hello everyone,
I have a stock ANJ7 Rom that I rooted via chainfire/ODin method with no issues. Now I am trying to flash the TWRP recovery via Odin ( using PDA line in odin) and I am getting an error.
This is what Odin says:
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> RQT_CLOSE !!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the device screen, it says SECURE CHECK FAIL: recovery.
What am I doing wrong?
Click to expand...
Click to collapse
possibly nothing. mine said that several times, yet still works. have you tried booting into recovery once you have powered it off?
re: twrp recovery
Android_Guy said:
Hello everyone,
I have a stock ANJ7 Rom that I rooted via chainfire/ODin method with no issues. Now I am trying to flash the TWRP recovery via Odin ( using PDA line in odin) and I am getting an error.
This is what Odin says:
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> RQT_CLOSE !!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the device screen, it says SECURE CHECK FAIL: recovery.
What am I doing wrong?
Click to expand...
Click to collapse
Are you sure you are using the correct version of TWRP for N910T?
Here is the download link for the latest twrp recovery v2.8.1.1 for N910T.
https://dl.dropboxusercontent.com/u/45687485/openrecovery-twrp-2.8.1.1-trltetmo.img.tar
Before flashing, make sure that the USB debugging is "enabled"
in the developer's options in settings.
Good luck!
Got it now....had to re-flash to stock, then root, then twrp. Strange but worked.
Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
maybe this will help
GabrielAK89 said:
Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
Click to expand...
Click to collapse
Hi
did you already try to get back to 100% stock ROM??
-
-
i can not yet post links but if you google "galaxy s stock rom" and than the first link.
take a look here for the stock ROMS
http://www.sammobile.com/firmwares/database/GT-I9000/
it warked with another version...strange thow.
Thx.
I will try now to put again the 4.4.x
I have searched for about the past 3-4 hours which is a lot longer than it usually takes for me to get to the bottom of these dang things. My phone (Galaxy S5 G900A Lollipop 5.0) has been really screwy on the WiFi lately (home, out in public, family members homes) so I decided (after a factory reset, safe mode, etc failing) to go ahead and try to downgrade my phone. So I went online and found out you can do it with Odin (3.09, 3.10, 3.06) and attempted it. I downloaded a stock 4.4.4 firmware and went to work. Immediately it failed with the error I am still getting which is the following:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Example of the firmware update screen: Unable to post outside link, just google "firmware update encountered an issue galaxt s5" it's the first image.
Example of the download screen I use with Odin (as instructed): Unable to post outside link, just google "download mode glaaxy s5" it's the first image.
I have attempted using both the old and new version of Kies to perform the emergency and normal firmware update procedures. My phone does not show in the emergency firmware recovery screen and the firmware update mode ends in an error telling me to use the emergency firmware update, which as mentioned does not work.
With Odin I have attempted: Multiple computers, multiple USB ports on each computer, reinstalling Samsung drivers, restarting computer, multiple Odin versions, multiple firmware files (4.4.4, 4.4.2), running as administrator
Windows 8.1
Update on errors: My screen shows the following error on my phone in RED under "UDC Start" when Odin Fails:
SYS REV CHECK FAIL : Refer 2 > Binary 1
SECURE CHECK FAIL : system
You can't downgrade from 5.0. Flash 5.0 and you will be fine. If I'm not mistaken, the new bootloader is not backwards compatible and therefore won't let a downgrade happen.
Took to Best Buy, flashed and resolved in less than 10 minutes at Samsung center.
daddynexxus said:
Took to Best Buy, flashed and resolved in less than 10 minutes at Samsung center.
Click to expand...
Click to collapse
You won't be able to downgrade and that was your problem in the beginning
Same issue
I have having the same issue, I tried flashing Odin 4.4 back to the S5 once it has 5.0. It now errors out in Odin and in Kies, I really dont know what to do. Error: SW Rev Check Fail : Aboot Fused 3 > Binary
Rayman3030 said:
I have having the same issue, I tried flashing Odin 4.4 back to the S5 once it has 5.0. It now errors out in Odin and in Kies, I really dont know what to do. Error: SW Rev Check Fail : Aboot Fused 3 > Binary
Click to expand...
Click to collapse
Go here and follow direction. Do the last section of the OP.
http://forum.xda-developers.com/showthread.php?p=60012961
Sent from my SAMSUNG-SM-G900A
I'm currently trying to flash the stock firmware onto my GS6, but every time I get:
Code:
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried multiple USB cables and ports. It sits on SetupConnection for around 5 minutes before saying the operation failed.
Click to expand...
Click to collapse
I have fixed the issue.