[Q] Serious BootLoop ! NEED HELP - Sony Xperia T, TL, TX, V

The last thing i tried doing was to restore a backup from CWM.
After restoring it goes on bootloop.
yes, i tried to go to recovery, it doesnt..
yes, i tried to go to flashmode, it doesnt work..
All it does is show the SONY logo, and restart again and again..
i need to fix this ASAP, so anyone who has an idea, please let me know ..

Use Flashtool to install a stock firmware.

WhiteNeo said:
Use Flashtool to install a stock firmware.
Click to expand...
Click to collapse
Hi, I rooted my phone using towelroot and and then i changed my dpi to 300 which is not supported by my phone.. THE specific phone details
DETAIL:
-It is Locked
-I cannot enter recovery mode
-I cannot enter fastboot
-My usb debugging mode is off..
-im on bootloop
pls help :/ I want my phone back

Rakistako said:
Hi, I rooted my phone using towelroot and and then i changed my dpi to 300 which is not supported by my phone.. THE specific phone details
DETAIL:
-It is Locked
-I cannot enter recovery mode
-I cannot enter fastboot
-My usb debugging mode is off..
-im on bootloop
pls help :/ I want my phone back
Click to expand...
Click to collapse
Maybe you could try repairing the software via pc companion?

can You pls give me a link or a video ?
---------- Post added at 10:37 AM ---------- Previous post was at 10:30 AM ----------
SteCole77 said:
Maybe you could try repairing the software via pc companion?
Click to expand...
Click to collapse
'
so i tried what u have said and it says here that "pc companion was not able to connect to the phone.
---------- Post added at 11:31 AM ---------- Previous post was at 10:37 AM ----------
WhiteNeo said:
Use Flashtool to install a stock firmware.
Click to expand...
Click to collapse
can you pls guide me all the way ? :/

Rakistako said:
can You pls give me a link or a video ?
---------- Post added at 10:37 AM ---------- Previous post was at 10:30 AM ----------
'
so i tried what u have said and it says here that "pc companion was not able to connect to the phone.
---------- Post added at 11:31 AM ---------- Previous post was at 10:37 AM ----------
can you pls guide me all the way ? :/
Click to expand...
Click to collapse
Try this thread, it should hopefully guide you all the way...
[GUIDE] Recover 2012 and newer XPERIAs from SOFT-brick
All the best!!

SteCole77 said:
Try this thread, it should hopefully guide you all the way...
[GUIDE] Recover 2012 and newer XPERIAs from SOFT-brick
All the best!!
Click to expand...
Click to collapse
thanks xD

Related

[Q] Help! I think i bricked my x8

Hey guys, sorry if I write bad.
I tried to flash my x8 for put in the rom GingerDX v31b. Anyways... I think my USB cable was broken or something, when I tried to flash baseband 015, it was flashed but then I power on my phone and... Boom! That image appeared: a triangle with a exclamation sign and a phone .
It reboots again and again, my computer doesn't recognize the phone. I need help guys. Sorry for bad writing.
On the other hand.. I have my phone with unlocked bootloader, and I installed so much roms. Any question? sorry if I forgot something. Thank you guys and sorry again if I put the thread in the wrong place.
Francisco Fávaro.
hmm you are sure that flashtool doesnt recognize it?
if you cant use flashtool then go to recovery
i hope this is going to solve he problem
send from xperia x8
little help
Hi,
I've tried to flash my xperia x8 with flashtool but after the flashing, my phone turn off and it won't turn on or connect to the pc. Is it broken for good or there is still hope
noki severgun said:
Hi,
I've tried to flash my xperia x8 with flashtool but after the flashing, my phone turn off and it won't turn on or connect to the pc. Is it broken for good or there is still hope
Click to expand...
Click to collapse
Look under your battery inside the phone. There is a number like 10W34 or 11W10
What is your number?
1.turn of the device
2.open pc companion
3.click support zone
4.click update without connected phone
5.It will ask you about repair(something like that..)
6.click yes
7.wait the program to prepare the pc
8.chose the x8 from devices list
9.wait until download the rom
10.plug the device when the program say to..
CtrlAltDelIrl said:
Look under your battery inside the phone. There is a number like 10W34 or 11W10
What is your number?
Click to expand...
Click to collapse
it is 11w16
Wait...why do you think it's something about bootlader???
just connect to flashtool and recover or if can't be recognized then try with PC Companion else reinstall rom or restore backup with recovery
---------- Post added at 03:44 PM ---------- Previous post was at 03:31 PM ----------
noki severgun said:
Hi,
I've tried to flash my xperia x8 with flashtool but after the flashing, my phone turn off and it won't turn on or connect to the pc. Is it broken for good or there is still hope
Click to expand...
Click to collapse
Ok you flash something but WHAT?
All i know that you have 11W16 and you can't hard brick that(unless you are really..... )
Anyway let's help you out
First of all,how many % did your battery have before flashing?
If under 10% then try to connect the charger
if it done't help keep reading
What did you do with flashtool--->FLASHING or UNLOCKING BOOTLOADER?
If FLASHING: What did you flash,please write down name of file
If UNLOCKING BOOTLOADER:
Try to turn on you phone--->If it won't turn on---->try to connect it to PC in flashmode so FLASHTOOL can recognize it
If FLASHTOOL can't recognize it try with PCC.....if that doesn't work either see does your phone have any Signs of life
If you'r phone is completly dead(no sign of life) than it's probably a HARD BRICK
I hope i helped :good:
big THANKS
8cpaiw said:
Wait...why do you think it's something about bootlader???
just connect to flashtool and recover or if can't be recognized then try with PC Companion else reinstall rom or restore backup with recovery
---------- Post added at 03:44 PM ---------- Previous post was at 03:31 PM ----------
Ok you flash something but WHAT?
All i know that you have 11W16 and you can't hard brick that(unless you are really..... )
Anyway let's help you out
First of all,how many % did your battery have before flashing?
If under 10% then try to connect the charger
if it done't help keep reading
What did you do with flashtool--->FLASHING or UNLOCKING BOOTLOADER?
If FLASHING: What did you flash,please write down name of file
If UNLOCKING BOOTLOADER:
Try to turn on you phone--->If it won't turn on---->try to connect it to PC in flashmode so FLASHTOOL can recognize it
If FLASHTOOL can't recognize it try with PCC.....if that doesn't work either see does your phone have any Signs of life
If you'r phone is completly dead(no sign of life) than it's probably a HARD BRICK
I hope i helped :good:
Click to expand...
Click to collapse
First of all THANKS A LOT for your effort, I mean: really THANKS!!!
So let me tell you a story
It was my forth x8 phone that I've tried to install CM9 on and previously it went very well but yesterday I've did it in a hurry and forget to change the flash file on the flash tool and when I click on the magic button with the flash sign I've realized that the x8 was flashed with x10 firmware the default firmware on the flashtool program (really stupid mistake ). After that the phone turn off and went on haven.
After I cold my head and start to search for new x8 (to replace the broken one) I've realized that the phone has 24 month warranty and the first thing that I did this morning was to return the phone to the shop that was bot from.
I hope that some of you out there had 5 min lol session from my experience in the story, and please, If somebody else thinks that he knows how to do it without reading the manual - this are the consequences!!!
The only way to bring this phone alive is with riff jtag box that I didn't have.
P.S. **** happens
Yes a few people from forum flashed wrong firmware and got hard bricked....amm it's hard brick so they will replace your motherboard
I am glad to help

[Q] FLASHED G2 Recovery to G FLEX HELP!!!!!!!!

I ****ed up. I was working on my friends G2 and my G Flex and i got confused and ran the app that flashes recovery for the g2 and now it wont turn on. it is detected as android modem phone adb port, i can get it detected in the LG flash tool but they fail, im using LS995ZV3_17.S3_17.P51098.tot and LGLS995_20140116_LGFLASHv151.dll
Someone please help
Sprint 995 G flex
What you are in is fastboot mode, http://downloads.codefi.re/autoprime/LG/G_Flex/LS995/stock_firmware/ZV3_partitions take these partitions and fastboot them one at a time with command fastboot flash boot drag boot image here. Fastboot flash aboot drag aboot image here. Got it?
Sent from my LG-LS980 using XDA Premium 4 mobile app
i have the same problem.but only run cmd it say me...waiting for devices.i have install the lg mobile drivers and nothing.my friend really please.breake my mind and feel the lg really dead
dancemaster said:
i have the same problem.but only run cmd it say me...waiting for devices.i have install the lg mobile drivers and nothing.my friend really please.breake my mind and feel the lg really dead
Click to expand...
Click to collapse
This is the 10th post you've made asking for help for the same problem. There isn't anything anyone can do to help you, in case it isn't obvious.
what is your problem man?
---------- Post added at 10:38 AM ---------- Previous post was at 10:30 AM ----------
whats your problem man?i cant find any solution for this.and this site and developers is the only help for me.i cant have 200 euro for service.you dont undersant me because you dont have this problem.
dancemaster said:
what is your problem man?
---------- Post added at 10:38 AM ---------- Previous post was at 10:30 AM ----------
whats your problem man?i cant find any solution for this.and this site and developers is the only help for me.i cant have 200 euro for service.you dont undersant me because you dont have this problem.
Click to expand...
Click to collapse
Follow the rules and there will be no problems. The mods already warned you and shut down your threads and you just keep creating more, giving no information when needed to even fix the problem.
Sent from my LG-D950 using XDA Premium 4 mobile app
Hi chrisschlagal,
did you check the port number in windows/linux device manager after connecting the device? Did you set it to port 41?
Go get the stock rom for your version and flash through Odin. It was kinda stupid for you to flash a G2 recovery in the first place.
dancemaster said:
what is your problem man?
---------- Post added at 10:38 AM ---------- Previous post was at 10:30 AM ----------
you dont undersant me because you dont have this problem.
Click to expand...
Click to collapse
You're right, I don't have this problem because I know better than to flash my phone with something that's not made for my phone.
if you know say and me.i have soft bring my rooted flex d955.install drivers and my pc see my phone as a modem.i cant boot into recovery mode.and adb doesnt work.i can boot only download mode.i try run vbscript and nothing.vbscript not run.what can i do.you if you know man????
dancemaster said:
if you know say and me.i have soft bring my rooted flex d955.install drivers and my pc see my phone as a modem.i cant boot into recovery mode.and adb doesnt work.i can boot only download mode.i try run vbscript and nothing.vbscript not run.what can i do.you if you know man????
Click to expand...
Click to collapse
Nobody knows.
Hi there,
did you try to enter recovery mode by holding volume down button and power button very minimally downwards, touching both buttons with one finger only?
Recovery mode appears immediately and before the LG logo is booted.
nobody any idea?how can my pc see my flex in device and not as a modem?i can this fix my flex.really please any developer help me.
M.Catchit said:
Hi there,
did you try to enter recovery mode by holding volume down button and power button very minimally downwards, touching both buttons with one finger only?
Recovery mode appears immediately and before the LG logo is booted.
Click to expand...
Click to collapse
my flex boot only download mode.no recovery.i tried 100 times.stop in lg logo and flashled is enable.the problem is only one but very big i thing.pc see my mobile as a modem and i restore to stock not connected.fails
dancemaster said:
my flex boot only download mode.no recovery.i tried 100 times.stop in lg logo and flashled is enable.the problem is only one but very big i thing.pc see my mobile as a modem and i restore to stock not connected.fails
Click to expand...
Click to collapse
The only thing you can do from this point is flash a stock rom for your model through odin. I've done it before.
Hi,
try one finger on button volume down and then additionally slightly touch with this finger power button, too. It will boot into Recovery mode.
For rebooting via windows/linux command window usb debugging must be enabled in settings.
Sent from my LG-LS995 using XDA Free mobile app
M.Catchit said:
Hi,
try one finger on button volume down and then additionally slightly touch with this finger power button, too. It will boot into Recovery mode.
For rebooting via windows/linux command window usb debugging must be enabled in settings.
Sent from my LG-LS995 using XDA Free mobile app
Click to expand...
Click to collapse
i cant boot into recovery.i try 100 times.work odin in lg phones?where i download 2 files if i need for this?i have d955 europe
install drivers and cdc serial driver not install.and my pc see my phone as a androidphonemodem.why it happen?anmy idea i solve this.please
dancemaster said:
install drivers and cdc serial driver not install.and my pc see my phone as a androidphonemodem.why it happen?anmy idea i solve this.please
Click to expand...
Click to collapse
It's bricked.
Visa Declined said:
It's bricked.
Click to expand...
Click to collapse
i know this.what can i do?you know?

[Q] Rare Case - Red LED always on while screen is on

Alright. My brother bought a used Xperia Z about 2 weeks ago. After using it some days, suddenly this happened. The red LED always stays on while the screen is on. And this is a rare problem. I don't see any problems like this before in XDA. The phone is not rooted nor the bootloader has been unlocked. Can someone help fix this problem, or tell me what partition is damaged, etc? I can't confirm this is a HW damage coz it's not dropped, or punched, etc The red LED acts normally if the screen is off (e.g. while charging, notification, etc).
Vinardo_ZzZ 2000 said:
Alright. My brother bought a used Xperia Z about 2 weeks ago. After using it some days, suddenly this happened. The red LED always stays on while the screen is on. And this is a rare problem. I don't see any problems like this before in XDA. The phone is not rooted nor the bootloader has been unlocked. Can someone help fix this problem, or tell me what partition is damaged, etc? I can't confirm this is a HW damage coz it's not dropped, or punched, etc The red LED acts normally if the screen is off (e.g. while charging, notification, etc).
Click to expand...
Click to collapse
Factory reset will solve your issue most probably :good:
androidtweaker1 said:
Factory reset will solve your issue most probably :good:
Click to expand...
Click to collapse
My bro tried it many times. Using PC Companion doesn't work either...
Vinardo_ZzZ 2000 said:
My bro tried it many times. Using PC Companion doesn't work either...
Click to expand...
Click to collapse
bro you can try flashing stock rom again.
---------- Post added at 12:51 PM ---------- Previous post was at 12:45 PM ----------
Vinardo_ZzZ 2000 said:
My bro tried it many times. Using PC Companion doesn't work either...
Click to expand...
Click to collapse
download 4.4.2 official ftf from here https://mega.co.nz/#!Bk0XlY7S!7rhLzB...omXmNTcrI3h4Vc
download flashtool from here http://www.flashtool.net/download.php
after installing flashtool go to c: then flashtool folder
go to drivers install from exe file, select flashboot and fastboot and finish installation
open flashtool, click on the lightning button, select flashboot.
select the firmware downloaded(make sure you cut paste the ftf file in the firmware folder of flashtool folder)
put phone in flashmode when prompted(hold power down key and connect usb)
once flashing is complete disconnect and switch on the phone
androidtweaker1 said:
bro you can try flashing stock rom again.
---------- Post added at 12:51 PM ---------- Previous post was at 12:45 PM ----------
download 4.4.2 official ftf from here https://mega.co.nz/#!Bk0XlY7S!7rhLzB...omXmNTcrI3h4Vc
download flashtool from here http://www.flashtool.net/download.php
after installing flashtool go to c: then flashtool folder
go to drivers install from exe file, select flashboot and fastboot and finish installation
open flashtool, click on the lightning button, select flashboot.
select the firmware downloaded(make sure you cut paste the ftf file in the firmware folder of flashtool folder)
put phone in flashmode when prompted(hold power down key and connect usb)
once flashing is complete disconnect and switch on the phone
Click to expand...
Click to collapse
I think he already tried flashing with flash mode too. I will ask him later. Thanks for your suggestion
Vinardo_ZzZ 2000 said:
I think he already tried flashing with flash mode too. I will ask him later. Thanks for your suggestion
Click to expand...
Click to collapse
ok

xperia sp stuck in bootloop!

hello guys im new to sony, and got my xperia sp just 1 week ago!
here's what i did.
1. rooted using towelroot
2. installed super su from play store
3. installed twrp with a tool,
4. copied xperianzev3 and gapps to sd card
5. backup
6. did wipes and flashed rom and gapps via twrp
everything went fine and the rom was good,
i was stupid enough to boot into recovery and restore the backup i made( boot.img also)
still the phone was working but gapps were crashing repeatedly!
so i booted into recovery but there was no recovery! i installed the recovery again with the tool
now the phone is stuck in bootloop, is constantly rebooting ( first sony logo, then xpria then the color splash, then reboot!)
please help me with details! i know nothing about flashtool , fastboot!
my phone is c5306 factory unlocked, locked bootloader!
Download the stock .FTF file for your Xperia SP model. Download Flashtool by androxyde and also install Xperia drivers for your Windows pc which come along with the Flashtool.
Place your downloaded stock .FTF file inside (C:/Flashtool/Firmwares) here C is normal drive where Flashtool installs you can respective drive with which you want. Then make sure your phone is switched off.
Open Flashtool and thn hit smart lighting button on top left and from there select flashmode and click OK.
There you will see your downloaded ftf if you placed it under firmware folder.
Now just select it and click flash and wait for the Flashtool to load files. Once it's done then you will see a menu popping up saying to connect your device. With device switched off press and hold power button and Volume down button to connect it into flashmode and that's it wait for the flashtoool to do the job. Once it is complete then disconnect your device and start it and wait until it loads.
Hope I helped. Hit thanks if I did
Sent from my C5302 using XDA mobile app
Take a look at my guide to recover your ass from that sick-ass bootloop!
http://forum.xda-developers.com/xperia-sp/general/root-ultimate-noobs-guide-to-rooting-t2845520
Tech N You said:
Download the stock .FTF file for your Xperia SP model. Download Flashtool by androxyde and also install Xperia drivers for your Windows pc which come along with the Flashtool.
Place your downloaded stock .FTF file inside (C:/Flashtool/Firmwares) here C is normal drive where Flashtool installs you can respective drive with which you want. Then make sure your phone is switched off.
Open Flashtool and thn hit smart lighting button on top left and from there select flashmode and click OK.
There you will see your downloaded ftf if you placed it under firmware folder.
Now just select it and click flash and wait for the Flashtool to load files. Once it's done then you will see a menu popping up saying to connect your device. With device switched off press and hold power button and Volume down button to connect it into flashmode and that's it wait for the flashtoool to do the job. Once it is complete then disconnect your device and start it and wait until it loads.
Hope I helped. Hit thanks if I did
Sent from my C5302 using XDA mobile app
Click to expand...
Click to collapse
thanks for the help
i followed all your instructions, but it shows, system.sin error, tried a hundred times!!!!
moosa27 said:
thanks for the help
i followed all your instructions, but it shows, system.sin error, tried a hundred times!!!!
Click to expand...
Click to collapse
That seems to be a firmware error. Try redownloading the stock Firmware again or try another version
---------- Post added at 06:22 AM ---------- Previous post was at 06:20 AM ----------
Also what version of windows are you using?
Tech N You said:
Download the stock .FTF file for your Xperia SP model. Download Flashtool by androxyde and also install Xperia drivers for your Windows pc which come along with the Flashtool.
Place your downloaded stock .FTF file inside (C:/Flashtool/Firmwares) here C is normal drive where Flashtool installs you can respective drive with which you want. Then make sure your phone is switched off.
Open Flashtool and thn hit smart lighting button on top left and from there select flashmode and click OK.
There you will see your downloaded ftf if you placed it under firmware folder.
Now just select it and click flash and wait for the Flashtool to load files. Once it's done then you will see a menu popping up saying to connect your device. With device switched off press and hold power button and Volume down button to connect it into flashmode and that's it wait for the flashtoool to do the job. Once it is complete then disconnect your device and start it and wait until it loads.
Hope I helped. Hit thanks if I did
Sent from my C5302 using XDA mobile app
Click to expand...
Click to collapse
Furrydaus said:
That seems to be a firmware error. Try redownloading the stock Firmware again or try another version
---------- Post added at 06:22 AM ---------- Previous post was at 06:20 AM ----------
Also what version of windows are you using?
Click to expand...
Click to collapse
i tried with two different firmwares!
also i have windows 7
moosa27 said:
i tried with two different firmwares!
also i have windows 7
Click to expand...
Click to collapse
Ok then. Are fastboot drivers are installed btw?
Furrydaus said:
Ok then. Are fastboot drivers are installed btw?
Click to expand...
Click to collapse
yes they are
How many times have you flashed a custom rom to you device?
Furrydaus said:
Ok then. Are fastboot drivers are installed btw?
Click to expand...
Click to collapse
Furrydaus said:
How many times have you flashed a custom rom to you device?
Click to expand...
Click to collapse
exactly 6 days since i got my phone! this is my first rom, and now i also unlocked my bootloader while in flashmode
moosa27 said:
exactly 6 days since i got my phone! this is my first rom, and now i also unlocked my bootloader while in flashmode
Click to expand...
Click to collapse
Ok so im sorry to say that the Firmware should be the problem. I suggest you download the stock FTF file for Singapore, my country as it seems that your stock FTF file might have been uploaded wrongly. There is also a chance that your phone might have a NAND error which means that your hardware might have a hardware error.
Furrydaus said:
Ok so im sorry to say that the Firmware should be the problem. I suggest you download the stock FTF file for Singapore, my country as it seems that your stock FTF file might have been uploaded wrongly. There is also a chance that your phone might have a NAND error which means that your hardware might have a hardware error.
Click to expand...
Click to collapse
are you sure it will work with my device c5306? if yes do you have link for stock firmwares?
moosa27 said:
are you sure it will work with my device c5306? if yes do you have link for stock firmwares?
Click to expand...
Click to collapse
Check out my guide's section ; Restore Device by Flashtool. It has all of the instructions to getting back your device and links to the list of stock firmwares
---------- Post added at 06:54 AM ---------- Previous post was at 06:50 AM ----------
If youre still receiving errors, you might need to send it for repair. Im not sure whether you'll still have your warranty intact though...
Furrydaus said:
Check out my guide's section ; Restore Device by Flashtool. It has all of the instructions to getting back your device and links to the list of stock firmwares
Click to expand...
Click to collapse
damn! thats where i got the firmwares from! should i redownload and try?
moosa27 said:
damn! thats where i got the firmwares from! should i redownload and try?
Click to expand...
Click to collapse
For the time being you should.. But then again ill find time to search for another link/thread
---------- Post added at 07:01 AM ---------- Previous post was at 06:56 AM ----------
Got another link that you might want to try; http://www.nicois.me/2013/01/XPERIA-OFFICIAL-STOCK-FIRMWARE-DOWNLOAD-FTF-FILES.html
Furrydaus said:
For the time being you should.. But then again ill find time to search for another link/thread
---------- Post added at 07:01 AM ---------- Previous post was at 06:56 AM ----------
Got another link that you might want to try; http://www.nicois.me/2013/01/XPERIA-OFFICIAL-STOCK-FIRMWARE-DOWNLOAD-FTF-FILES.html
Click to expand...
Click to collapse
sorry bro, same error! system.sin
Well then I guess you can either contact a dev here or you can go to your respective sony repair centre to request for a phone repair although i doubt they will repair it for free...
Sorry for the loss
While you are flashing the firmware in the right side you will see exclude box just click on system.sin and try again it'll surely work
Sent from my C5302 using XDA Free mobile app
Tech N You said:
While you are flashing the firmware in the right side you will see exclude box just click on system.sin and try again it'll surely work
Sent from my C5302 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah! Thanks bro! Op, follow his step. Totally forgotten about the box for system.sin
No problem u might just have missed the point or else u sure are a dev yourself! OP try this it should wok.
Sent from my C5302 using XDA Free mobile app

help to recover Z1 from hard brick

my z1 doesn't boot or charging
this happened after flashing a custom rom
can i recover it ??
what should i find a replacment for the motherboard ?
sorry for my bad english
hope to find any one to help
Steliyos said:
my z1 doesn't boot or charging
this happened after flashing a custom rom
can i recover it ??
what should i find a replacment for the motherboard ?
sorry for my bad english
hope to find any one to help
Click to expand...
Click to collapse
post stat of your phone -->
1. flashmode & fastboot working?
2. LED when power key is pressed?
3. what rom you flashed?
DectonX said:
post stat of your phone -->
1. flashmode & fastboot working?
2. LED when power key is pressed?
3. what rom you flashed?
Click to expand...
Click to collapse
none of them is working
led isn't working too
DU10.5
yes you can fix your hard brik xperia z1
Steliyos said:
my z1 doesn't boot or charging
this happened after flashing a custom rom
can i recover it ??
what should i find a replacment for the motherboard ?
sorry for my bad english
hope to find any one to help
Click to expand...
Click to collapse
i was facing the same problem with my z1 c6902
only red led while charging
no sony logo
no fastboot mode
pc recognize it in flash mode
how i solved it?
i used xperia companion,
connect your z1 with pc
select repair software
follow the instructions you'll get yur z1 unbricked
vjluvanee said:
i was facing the same problem with my z1 c6902
only red led while charging
no sony logo
no fastboot mode
pc recognize it in flash mode
how i solved it?
i used xperia companion,
connect your z1 with pc
select repair software
follow the instructions you'll get yur z1 unbricked
Click to expand...
Click to collapse
ok the device is seen by the computer but it doesn't boot to download mode
when i connect it shows that there is a device connected to the computer but it's shown as it's a usb input device
can u help me with this?
Have you installed drivers!
---------- Post added at 08:42 PM ---------- Previous post was at 08:40 PM ----------
Steliyos said:
ok the device is seen by the computer but it doesn't boot to download mode
when i connect it shows that there is a device connected to the computer but it's shown as it's a usb input device
can u help me with this?
Click to expand...
Click to collapse
Drivers are installed?
Which os u r using?
vjluvanee said:
Have you installed drivers!
---------- Post added at 08:42 PM ---------- Previous post was at 08:40 PM ----------
Drivers are installed?
Which os u r using?
Click to expand...
Click to collapse
yes of course it's
windows 10 -64 bit
If PC recognizes your phone, can you use that to boot into fastboot mode?
Either use adb command "adb reboot fastboot" in PC
Or press and hold VOLUME_UP button then connect your phone to PC via USB (should see blue LED)

Categories

Resources