Hi to all,
I hope people here can help me solve my gt problem connecting with my pc (win7), I already download this Samsung_P1000_USB_Drivers and install to my computer, still Kies cannot detect my tab.
Some say you don't need any driver if you're using Win7 but why I encounter this problem.
Some say you need to turn off the USB Debugging before you connect your tab from your pc but still I encounter this problem.
Some say install the driver from Kies built-in driver but still encountering this problem.
My GT O/S still stock, its still intact since I out my GT from the box.
Please share me your experience if you encounter this problem and how you solve it, I can't flash any rom because my pc can't detect my tab at all.
Thank You and Regards to all.
[email protected] said:
Hi to all,
I hope people here can help me solve my gt problem connecting with my pc (win7), I already download this Samsung_P1000_USB_Drivers and install to my computer, still Kies cannot detect my tab.
Some say you don't need any driver if you're using Win7 but why I encounter this problem.
Some say you need to turn off the USB Debugging before you connect your tab from your pc but still I encounter this problem.
Some say install the driver from Kies built-in driver but still encountering this problem.
My GT O/S still stock, its still intact since I out my GT from the box.
Please share me your experience if you encounter this problem and how you solve it, I can't flash any rom because my pc can't detect my tab at all.
Thank You and Regards to all.
Click to expand...
Click to collapse
Can odin detects your tab? Another note is, is kies with the latest version?
fastcx said:
Can odin detects your tab? Another note is, is kies with the latest version?
Click to expand...
Click to collapse
Hi fastcx,
ODIN can't detect my GT, and I think I have the latest Kies which is version 2.0.0.11014_49.
Purchase in Riyadh
Some info of my gtab
PDA: P1000JPJK2
PHONE: P1000JXJK2
CSC: P1000JPJK1
Personalization Status
--------------------------------
Network Lock: Off
Networj Subset Lock: Off
SP Lock: Off
CP Lock: Off
Guys need your help regarding my problem.
Try to uninstall the drivers. You can do that with many uninstaller programs or you can use system restore. Go to settings and set galaxy tab connectivity to samsing kies. Connect your galaxy tab (make sure to disable debugging mode). Windows will install drivers which might take a few minutes. As for odin try to go to downloas mode by holding volume down and power button. If you get a yellow shade with com#. Your tab is recognised and connected.
Hope it helps!
Same issue with Kies not detecting SGT
I'm new to the forum, and a new SGT owner, so my knowledge is limited. I have been researching these forums along with some help from the unlockr.com. Kies would not detect my tab. I downloaded the Samsung New PC Studio, and was able to have my drivers downloaded through this software. My tab is now rooted. I still don't know what else to do with the rooted tab at this point, but I'm still researching.
dxwilliams40 said:
I'm new to the forum, and a new SGT owner, so my knowledge is limited. I have been researching these forums along with some help from the unlockr.com. Kies would not detect my tab. I downloaded the Samsung New PC Studio, and was able to have my drivers downloaded through this software. My tab is now rooted. I still don't know what else to do with the rooted tab at this point, but I'm still researching.
Click to expand...
Click to collapse
Hi dxwilliams40,
What Samsung New PC Studio version you have?
Can you give me the url where you get this software?
Also, can you give me the procedure on how you get the driver using this Samsung New PC Studio?
TIA.
DarkPal said:
Try to uninstall the drivers. You can do that with many uninstaller programs or you can use system restore. Go to settings and set galaxy tab connectivity to samsing kies. Connect your galaxy tab (make sure to disable debugging mode). Windows will install drivers which might take a few minutes. As for odin try to go to downloas mode by holding volume down and power button. If you get a yellow shade with com#. Your tab is recognised and connected.
Hope it helps!
Click to expand...
Click to collapse
Hi DarkPal,
I uninstalled all samsung drivers and kies but still gt is not detected by win7.
I tried also download mode by holding both power and down volume button and odin 1.3 and odin 1.7 not detect my gt.
Any more idea?
TIA.
[email protected] said:
Hi DarkPal,
I uninstalled all samsung drivers and kies but still gt is not detected by win7.
I tried also download mode by holding both power and down volume button and odin 1.3 and odin 1.7 not detect my gt.
Any more idea?
TIA.
Click to expand...
Click to collapse
This sound worrying When you plugged in to your pc, did your tab's battery icon change?
fastcx said:
This sound worrying When you plugged in to your pc, did your tab's battery icon change?
Click to expand...
Click to collapse
Yes, it goes to recharge mode, this is the only thing I can only use between my gt and my computer is to recharge.
To all XDA member's who have this problem before and solve it, please share it to me, I can't move from here I have a good device but I can't maximize the use of it.
Regards to all,
Yes as a matter of fact i have more ideas. Press on menu button while on home screen, go to settings then wireless network and then choose usb settings. Choose ask on connection, if your tab is set on kies. If its set on mass storage set on kies, we all know windows installs no drivers for mass storage. Also try connecting tab on other computer and see if it connects preferrably with other OS. Sorry to disagree still doesnt seem worrying because i faced problem with a samsung mp3 player which used to give me hell with connecting using mtp (media transfer protocol). If it connects to other computers download mtp protocol from microsoft website manually. I will dig it up for you if you report that its working on other computers. Also will dig drivers from my own W7 machine 64 bit to see if it helps.
EDIT did a quick search online. Connect your galaxy tab in kies mode WHIlLE installing kies. Seemed to help many android galaxy S users.
W7 PORTING KIT DOWNLOAD: http://msdn.microsoft.com/en-us/windows/hardware/gg463543
DarkPal said:
Yes as a matter of fact i have more ideas. Press on menu button while on home screen, go to settings then wireless network and then choose usb settings. Choose ask on connection, if your tab is set on kies. If its set on mass storage set on kies, we all know windows installs no drivers for mass storage. Also try connecting tab on other computer and see if it connects preferrably with other OS. Sorry to disagree still doesnt seem worrying because i faced problem with a samsung mp3 player which used to give me hell with connecting using mtp (media transfer protocol). If it connects to other computers download mtp protocol from microsoft website manually. I will dig it up for you if you report that its working on other computers. Also will dig drivers from my own W7 machine 64 bit to see if it helps.
EDIT did a quick search online. Connect your galaxy tab in kies mode WHIlLE installing kies. Seemed to help many android galaxy S users.
W7 PORTING KIT DOWNLOAD: http://msdn.microsoft.com/en-us/windows/hardware/gg463543
Click to expand...
Click to collapse
Hi DarkPal,
I do 1 by 1 your advice but in the ended it's still the same, I installed MTP from your link but my PC can't detect my GT.
I attached my GT from our 2 laptops both Win7 but they can't detect also my GT.
Hope you have more plan
TIA
Still more plans. I have phd with samsung devices not connecting to many windows pcs (dunno if faulty drivers submitted to microsoft by samsung or issue in an end user enviroment. Anyway few question: is your galaxy in usb debugging mode? Tap menu then choose settings applications development. Make sure USB is not in debugging mode.
EDIT: is the usb charging fine? Is there any USB detections on tab screen. I read reports of faulty usb cables. If you have another SGT cable try it and see if it connects.
If uave the luxury connect other mtp devices like ipod or ipad or othe media players. This will sure exclude a pc or OS problem.
EDIT2 Here is a guide i followed back in mp3 days:
Go to samsung support site and download latest samsung kies (must be latest) and uninstaller package.
If u still have kies uninstall it with this package. If not run it anyway to remove any residual files. A cleaner program will clean as well.
Reboot your pc and your SGT.
Install samsung kies (make sure you run it as an administrator whether setup or program launch).
Now in your galaxy tab make sure usb settings is set to kies.
Fire up kies and connect your galaxy tab.
If there is no signs of connections. Access device manager and look for any imprperly connected device (would show as a yellow exclamation mark or saying unknown device). Reinstall kies USB driver. Disconnect tab and reconnect.
Few important notes:
Connect tab directly to the pc not via usb hub or similar apparatus (tab takes power from pc as well as data).
Update your windows media player to latest version (i know its bloated and hogs system resources but it has latest mtp repositories).
Always execute command as an adminstrator. Whether launching or installing.
I had the same problem long time ago. I solved changing the USB port. Befor I used the front case one...the I switch the port in one of the back case and it was working without any issue. Try this. I hope it help!
DarkPal said:
Still more plans. I have phd with samsung devices not connecting to many windows pcs (dunno if faulty drivers submitted to microsoft by samsung or issue in an end user enviroment. Anyway few question: is your galaxy in usb debugging mode? Tap menu then choose settings applications development. Make sure USB is not in debugging mode.
EDIT: is the usb charging fine? Is there any USB detections on tab screen. I read reports of faulty usb cables. If you have another SGT cable try it and see if it connects.
If u have the luxury connect other mtp devices like ipod or ipad or othe media players. This will sure exclude a pc or OS problem.
EDIT2 Here is a guide i followed back in mp3 days:
Go to samsung support site and download latest samsung kies (must be latest) and uninstaller package.
If u still have kies uninstall it with this package. If not run it anyway to remove any residual files. A cleaner program will clean as well.
Reboot your pc and your SGT.
Install samsung kies (make sure you run it as an administrator whether setup or program launch).
Now in your galaxy tab make sure usb settings is set to kies.
Fire up kies and connect your galaxy tab.
If there is no signs of connections. Access device manager and look for any imprperly connected device (would show as a yellow exclamation mark or saying unknown device).
Click to expand...
Click to collapse
Hi Again;
Debugging mode is off when I tested all your instruction on my sgt.
I uninstall Kies restart, download from samsung Kies 2.0.0.11014_49 and install it again, restart, test sgt fail again.
Win7 detect my sgt when you put on usb.
My sgt can recharge on my win7.
iPhone 3gs, iPhone 4, Blackberry 9780, iPad Wifi+3g all working with the same usb I use for sgt.
I hope you still have option that we can test
it look like you having problem with the data cable..... do you have another cable to try!
Well 2 options. A trick I never understood by Samsung support. Remove the Cable from PC while on keys wait 30 seconds and repeat procedure 3 times. Hopefully it will detect.
Also Cable could be the culprit as Ironically All SGT don't have exact same cables. You have to make sure you buy exact stock cable if you need a replacement. Ebay cables fail almost always even if it does the charge function.
you said w7 detects SGT when you put on USB. What type of detection Care to elaborate?
DarkPal said:
Well 2 options. A trick I never understood by Samsung support. Remove the Cable from PC while on keys wait 30 seconds and repeat procedure 3 times. Hopefully it will detect.
Also Cable could be the culprit as Ironically All SGT don't have exact same cables. You have to make sure you buy exact stock cable if you need a replacement. Ebay cables fail almost always even if it does the charge function.
you said w7 detects SGT when you put on USB. What type of detection Care to elaborate?
Click to expand...
Click to collapse
" USB Device Not Recognized " error occur when you put sgt on my computer.
And the removal of USB cable doesn't work also.
This is the original cable came from sgt box, it's new like 3 months only, anyway I will try to buy another cable and I hope this will work.
But anything you want me to try much appreciated, dunno where I can find original sgt cable, specially you mention buying online we don't know if genuine from samsung.
tnx man.
If device shows in device manager with yellow excalmation mark right click and uninstall unplug and try to plug the device again. And I Think i found a solution as odd as it seems first remove all usb devices connected to your pc ,flash drives, phones, pdas etc . You can even uninstall it by removing these devices from the device manager to uninstall these drives completely so they can be identified newly. Here is the weird part shutdown i mean pull the plug on computer wait 5 minutes to restart. A cold boot forces computer to reidentify usb ports. Reconnect and see if it works.
Also update your pc motherboard controllers from your pc driver site if w7 doesnt natively identify it.
EDIT follow this link instructions: www.ntcompatible.com/Desperately_need_help_---_USB_Devices_Not_Recognized_t32356.html. Seem to helped others.
DarkPal said:
If device shows in device manager with yellow excalmation mark right click and uninstall unplug and try to plug the device again. And I Think i found a solution as odd as it seems first remove all usb devices connected to your pc ,flash drives, phones, pdas etc . You can even uninstall it by removing these devices from the device manager to uninstall these drives completely so they can be identified newly. Here is the weird part shutdown i mean pull the plug on computer wait 5 minutes to restart. A cold boot forces computer to reidentify usb ports. Reconnect and see if it works.
Also update your pc motherboard controllers from your pc driver site if w7 doesnt natively identify it.
EDIT follow this link instructions: www.ntcompatible.com/Desperately_need_help_---_USB_Devices_Not_Recognized_t32356.html. Seem to helped others.
Click to expand...
Click to collapse
to make my life easier, now i use sony vaio i5 eseries with win7 64 bit.
so now the only device connected to my laptop is the sgt but still the device no recognized.
i go to device manager, i dont have the yellow exclamation instead i have the erroneous usb which i uninstall and restart try to connect again and still the same
maybe i need to find a new usb cable for sgt.
[email protected] said:
to make my life easier, now i use sony vaio i5 eseries with win7 64 bit.
so now the only device connected to my laptop is the sgt but still the device no recognized.
i go to device manager, i dont have the yellow exclamation instead i have the erroneous usb which i uninstall and restart try to connect again and still the same
maybe i need to find a new usb cable for sgt.
Click to expand...
Click to collapse
Still not giving up on you my friend. Try to put the tab in download mode (power and vol rocker down). Reboot computer and in device manager uninstall it. Disconnect the cable and reconnect it.
I have a final solution for you it involves installing heimdal usb drivers to your computer
LG Thrill Just will not root - superoneclick freezes at "waiting for device"
I am trying to root my LG Thrill 4G with SuperOneClick (I tried 3 different versions). After installing the drivers on my laptop (running Windows 7 32-bit), I put the phone in USB debug mode and pressed Root in SuperOneClick, but it freezes at "waiting for device".
Any ideas how to get past this? I have done a search here and google, as well as several other forums but doesn't seem to be that I can get an answer to this.
SuperOneClick v2.3.1.0 says :
"The following device does not have drivers installed:
Data Interface
USB\VID_413C&PID_8134&MI_01
Would you like me to forcefully install an Android ADB Interface
Driver for this device?"
First of all, what is the correct device driver to use for the LG Thrill 4G?
I have installed LG _USB _Drivers_All_4.9.7 (that one failed to install), and LGAndroidDriver_Ver_1.0_All
Use the links in general or development of xda thrill.
when u get the rite drivers and the rite super one click.
If when u have the proper drivers installed,make sure u
went in to your settings And click the USB debugging box.
Lastly open super one click and run
eastbayarb said:
I am trying to root my LG Thrill 4G with SuperOneClick (I tried 3 different versions). After installing the drivers on my laptop (running Windows 7 32-bit), I put the phone in USB debug mode and pressed Root in SuperOneClick, but it freezes at "waiting for device".
Any ideas how to get past this? I have done a search here and google, as well as several other forums but doesn't seem to be that I can get an answer to this.
SuperOneClick v2.3.1.0 says :
"The following device does not have drivers installed:
Data Interface
USB\VID_413C&PID_8134&MI_01
Would you like me to forcefully install an Android ADB Interface
Driver for this device?"
First of all, what is the correct device driver to use for the LG Thrill 4G?
I have installed LG _USB _Drivers_All_4.9.7 (that one failed to install), and LGAndroidDriver_Ver_1.0_All
Click to expand...
Click to collapse
First off, what's your firmware version?
Did you try clicking the checkbox for using alt adb? Also make sure on the phone that you have it in developer USB debugging mode.
Sent from my LG-P925 using XDA App
I'm all Googled out, searched this forum looking for a solution.
Here's the back story :
Phone : Bell Canada XT860 4G, bought on release day with 2.3.4
1) When I got the phone, there was no rooting process available
2) PSouza came up with one, successfully rooted on the first time I tried it
3) Installed Bootstrap, made some backups
4) A few months later, 2.3.6 was released and installed it via update.zip file, not OTA
5) Trying to root this release since I first got the update, but have been unable to do so.
6) Tried 6 different PC, running anything between Windows XP and 7.
So, everytime is try to root my phone, I try the ADB DEVICES command, and always find my device to be offline. Tried a few times to unplug, toggle USB debugging, plug the phone again, run the command, still offline. As I said previously, tried that one 6 different PCs, always yields the same results. Also tried all the USB ports on each PCs, as well as 3 different USB cables (2 from Moto, 1 from a Blackberry).
Also, for the ADB drivers to install the first time I plug in the device to a new PC, I have to put the phone in "Motorola Phone Portal" mode. "Charge Only/None" only installs disk drives drivers.
So here I am, still trying to root this phone since I installed the update. What bothers me is that it worked so flawlessly the first time I tried, but since the update, it almost looks like ADB isn't running on the device itself.
Do guys have any other idea ?
I'm using USB drivers from Motorola 5.2.0.
Do you know if there is a command I can run in Terminal Emulator that can force the ADB service or whatever you may call it on the device ?
Hey everybody. i've been running null rom 23 (or whatever the last one f0mey released was) for quite a while, and using an outdated gear manager because i was unable to connect on a newer manager. since the method to revert to android became available and i got a galaxy note 4, i want to update it to the newest stock tizen, then try tizenmod. however, i am having some serious driver problems. i managed to flash to stock android and now, unfortunately, my computer will no longer recognize the device in download mode. i have tried different ports and cables, rebooting the watch, rebooting the pc, manually switching the driver in device manager (which is successful but says the device could not start). i've uninstalled the drivers and reinstalled them, nothing has helped. any advice?
Welcome!
Is there any way to enable usb debug mode without NFC / Paired Samsung phone?
i managed to install gear manager on my sony phoney, i followed a tutorial on installing it on nexus five, this allowed me connect to gear and enable usb debugging.
Hmm
I can't understand what happens. I on usb debug. I flash with odin this: TizenMod-Rom-SM-V700-UCNF1-by-Skin1980-v3.0.tar
Restart. Now working but this is an old tizen os with a new boot logo. adb not see my device. I install all drivers correctly but adb not see in device manager. Just Gear. What's wrong? I see sdb only in device manager.
Tizen use sdb and android use adb? So downgrade to android first? If downgrade with this: http://forum.xda-developers.com/showthread.php?t=2776157 USB Debuging still on? Or i able to access settings?
Cool
Thanks for help.......