Help! JB to KK issues - AT&T Galaxy Note 3 Q&A, Help & Troubleshooting

Ok so i was going to move to a kit kat rom, downloaded dynamic kit kat and all the odin files, and safestrap says you need 3.75 for kit kat. but after installing that i can not get into it in order to wipe etc and install. I trued using the odin "to get to safe strap" flash" with no effect. I didnt want to flash all the odin files and brick the phone because i can not get to safe strap. I uninstalled safe strap in the app but can not uninstall the app nor install an other version "it fails"
how should i proceed?

iornman86 said:
Ok so i was going to move to a kit kat rom, downloaded dynamic kit kat and all the odin files, and safestrap says you need 3.75 for kit kat. but after installing that i can not get into it in order to wipe etc and install. I trued using the odin "to get to safe strap" flash" with no effect. I didnt want to flash all the odin files and brick the phone because i can not get to safe strap. I uninstalled safe strap in the app but can not uninstall the app nor install an other version "it fails"
how should i proceed?
Click to expand...
Click to collapse
You can odin the first 4 files in this thread if you want http://forum.xda-developers.com/showthread.php?t=2838117
They'll get you to kitkat right a way, BUT there is no going back to JB after doing that. So if you're OK with not being able to go back to JB follow these steps:
1. Download the first 4 files (or you can use the one that has "home" in it by itself) either one will work. The second one won't wipe your phone clean, that's all.
2.Put phone into download mode, connect to Odin, put the files in their correct slots, and hit "start". Let it do its thing. It will reboot and you're done with Odin after that.
3. Download towelroot from www.towelroot.com and install the app. Open it and run it (click "let it ra1n"). That should get you rooted. .
4. Download busybox from the playstore. Open it and run it (install it from within the app).
5. Download SS 3.75 or 3.72 ONLY!!!!! Open it. Install recovery. Start flashing.
6. Enjoy!

awsome Im downloading the home verson ill try it out tomorrow, which slot do i put that one in?

iornman86 said:
awsome Im downloading the home verson ill try it out tomorrow, which slot do i put that one in?
Click to expand...
Click to collapse
PA or is it AP?
Lol haven't used odin for a while, but I know it's the very first one.

it is ap the 2nd one, all installed thank for your help! thanks is clicked

iornman86 said:
it is ap the 2nd one, all installed thank for your help! thanks is clicked
Click to expand...
Click to collapse
So you're good now?

Yes everything is up and running fine thank you for your help

Related

[Q] Knoxraid on 4.4.2

Installed Knoxraid and it's great.. problem is.. it killed my safe strap. Tried to re-install safe strap and it fails every time. Using 3.71. It says recovery installed.. click to reboot.. it doesn't reboot.. when I manually reboot.. it reboots right back to Knoxraid. When I reboot to recovery.. it reboots to standard android recovery. Problem is i can't flash any roms. Not for keyboards.. not OSs -- nothing. Help please.
thx!
j
Go to the knoxraid thread and read. Safestrap hasn't been updated yet for kk so you need to use Odin and the files posted in drakey thread to get safe strap booting. It's all there just read throughly
Sent from my SAMSUNG-SM-N900A using Tapatalk
gharris040604 said:
Go to the knoxraid thread and read. Safestrap hasn't been updated yet for kk so you need to use Odin and the files posted in drakey thread to get safe strap booting. It's all there just read throughly
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
+1
I agree, i just used this method this morning Knoxdroid 4.0 and i flashed the Bobcat theme.
You need to install safestrap app, reboot to download mode, ODIN togetsafestrap, reboot and select safestrap recovery, flash/wipe whatever you wanted to do, reboot to download mode, ODIN togetbooting, reboot to system.
There is not a way to boot to safestrap or out of it without these steps currently. Honestly it takes up about 45 secs longer after you get used to it. Only other drawback is you need a PC and you cant flash on the go. Hope this helps.
There are detailed directions in the KNOXRAID OP about getting into safestrap with KitKat
Sent from my SAMSUNG-SM-N900A using Tapatalk

[Q] Stuck without a ROM and safestrap

while i was installing xnote build 11 i forgot to acutally install the zip before going to odin but i did remembered to delete system and data so now im stuck at the boot screen and i cant go into recovery since safestrap got deleted when i deleted the stock rom so i can get into download but i didnt have usb debugging on so i cant really use ADB im little stuck on what i should do next..
SS is still there. You need to get the togetsafestrap files provided in the OP and in the thread. They were posted shortly after you asked in there.
Also, please only post questions one time.
Sent from my SM-N9005A using XDA Premium 4 mobile app
A30laa said:
while i was installing xnote build 11 i forgot to acutally install the zip before going to odin but i did remembered to delete system and data so now im stuck at the boot screen and i cant go into recovery since safestrap got deleted when i deleted the stock rom so i can get into download but i didnt have usb debugging on so i cant really use ADB im little stuck on what i should do next..
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=2476353 to get back to stock and start over.
Also, usb will still work in download mode (follow instructions in thread). If you have trouble getting your device recognized in ODIN then try a different USB slot. That solves 90% of the problems with ODIN.
graydiggy said:
SS is still there. You need to get the togetsafestrap files provided in the OP and in the thread. They were posted shortly after you asked in there.
Also, please only post questions one time.
Sent from my SM-N9005A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So I downloaded those files and went through that process of installing so what I should do is odin those files then I should be able to hit vol down and powrr to get into ss since it doesn't pop up like safestrap usually does? Because all I see is the note 3 boot screen not the ss before that
You need to restore back to stock using the link i posted earlier.
Then root using kingo.
Install custom safestrap apk.
Install recovery in safestrap app.
Manually reboot into download mode.
Use ODIN and flash 'togetsafestap'.
Reboot and select recovery at startup.
Wipe everything except 'ext sd card'.
Install custom rom ( I recommend Knoxdroid 4.0 + Bobcat theme)
Clear dalvik and cache.
Reboot into download mode.
Use ODIN to flash 'togetbooting'.
Reboot into system.
Enjoy.
This is the best and fastest way to avoid any problems that may have been introduced with what has already been done. If you need any help just ask and feel free to search the dev threads.
Its been a while since I messed around with linux is there a verison you recommend to use on VMware since I'm going to be using it on Windows?
A30laa said:
Its been a while since I messed around with linux is there a verison you recommend to use on VMware since I'm going to be using it on Windows?
Click to expand...
Click to collapse
If you prefer Windows, use this thread. It's probably a bit easier to tell you the truth. Let me know if you need anything else.

Galaxy S4 Active 4.4.2 Kitkat ROOT

Hello everyone. It's me again now this time I bring you root access to the new OTA KITKAT for our S4
Disclaimer : I'm not responsible if your phone suddenly dies, explodes or your cat catches fire. Be warned.
SOME PEOPLE REPORT MOBILE DATA NOT WORKING AFTER THIS PROCESS SO ALL YOU GOTTA DO IS GO INTO YOUR APN SETTINGS MENU AND DO RESET TO DEFAULT SETTINGS AND WRITE YOUR CARRIERS APN SETTINGS AND IT WILL WORK.
This process has a lot of steps but if you follow them correctly you will end up with stock rooted 4.4.2 kitkat with super user and safestrap
Requirements:
If you already took the update and your system version is 4.4.2 keep reading.
1. Patience
2. Pwned Kitkat OTA Update link
3. Pwnedkernel for 4.3 Download
4. System image from stock 4.3 Tar file Download
5. Safestrap for the Galaxy S4 Active Download
6. Stock 4.4 Kitkat Kernel Download
7. Chainfire's SuperSu.zip Download
First after you finish downloading the stock 4.3 image extract it somewhere you remember and you'll see the following files:
BL_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar
AP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar
CSC_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar
CP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar
Put your phone in download mode and fire up odin. Under PDA select and flash
AP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar
This will downgrade your system back to 4.3 because yes the new kitkat bootloader allows you to flash 4.3 signed firmware. Note: YOU CANNOT DOWNGRADE BOOTLOADER SO DONT ATTEMPT IT
Wait until odin finishes flashing the firmware and when the phone reboots itself put it again in download mode. Now you must flash pwnedkernel.tar.md5 selecting PDA again in ODIN and wait for phone to boot up. If your phone gets stuck in the ATT logo then perform a factory reset .
Once your phone boots up enable USB debugging mode and root it using saferoot or vroot. GOOGLE it and you'll find it...Then you must install safestrap.apk
adb install safestrapactive.apk
Click to expand...
Click to collapse
Now copy pwnedkitkat.zip and update-Supersu.zip to your SD Card and once that's finished open up safestrap in your device and tap install when that's done tap reboot to recovery.
Now you'll be at the safestrap recovery screen so go ahead and select install zip file.
IMPORTANT : DO NOT DELETE DATA/CACHE OR DO A FACTORY RESET BEFORE FLASHING THE KITKAT.ZIP OTHERWISE YOU'LL HAVE TO START ALL OVER AGAIN.
Install pwnedkitkat.zip and once it finishes go ahead and install update-supersu.zip to enable root access.
AND FINALLY VERY IMPORTANT YOU MUST FLASH THE 4.4.2 STOCK KERNEL IMAGE USING ODIN AND SELECTING PDA OTHERWISE YOUR PHONE WONT BOOT
Wait for your phone to reboot, open up superuser and disable knox security.
Enjoy your rooted 4.4.2 S4 Active.
Credits : hashcode for making safestrap possible and the other amazing developers at XDA that discovered these exploits in the past and special thanks to Samsung for "letting" open these loopholes
If you are in official 4.3 ML2 see my next post.
Sunderwear said:
Hello everyone. It's me again now this time I bring you root access to the new OTA KITKAT for our S4
Uploading files at the moment....keep in mind that this is not a one click solution and we gonna have to exploit the loooholes courtesy of samsung to get this working..
For now some screenshots..
Click to expand...
Click to collapse
Thank you!
Can't wait. When is the ETA? estimate, 10 minutes?
I just can't wait transforming my S4 to S5!
Edit: 40 minutes passed
Now it is probably close to me. I can feel it!
THANK YOOOOOOU!!!!!!!!!!!!!!!!!!!!!!
If you're currently running 4.3 ML2 official update and you want to upgrade to 4.4.2 but dont want to lose root then keep reading.
In the following steps I'm assuming that you're currently running stock 4.3 Rooted ...see my other guide...and that you didn't modify any system apps otherwise the update will fail and you'll have to restore using the Odin package for 4.3.
1. Download pwnedkitkat.zip from 1st post.
2. If you dont have safetrap installed then you must download it and install it.
3. Copy pwnedkitat.zip and update-superuser.zip to your sdcard
4. Restart your phone in safestrap recovery and install pwnedkitkat.zip and when it's done flashing install superuser.zip.
WARNING : DO NOT PERFORM A FACTORY RESET BEFORE FLASHING THE ZIP. THIS IS A MODIFIED OFFICIAL UPDATE SO ONLY SYSTEM FILES WILL BE UPDATED. YOUR DATA WILL BE UNTOUCHED.
5.Put your phone in download mode and flash the 4.4.2 stock boot.tar.md5 kernel and your phone will boot after a few minutes with root access enabled.
Enjoy.
Deleted. As I managed to do it.
TransformixS4 said:
Thank you!
Can't wait. When is the ETA? estimate, 10 minutes?
I just can't wait transforming my S4 to S5!
Edit: 40 minutes passed
Now it is probably close to me. I can feel it!
THANK YOOOOOOU!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Done writing a quick messy guide. If you have any questions let me know. Enjoy:laugh:
need to delete all again , But you save us again !
Thank you !!
I took the ATT 4.4 ota. Can I still perform this method? You discussed the 4.3 to 4.4 method but not from 4.4 to 4.4 rooted. Thank you!
Sent from my SAMSUNG-SGH-I537 using Tapatalk
EDIT: I reread your post and it looks like the instructions are assuming you took 4.4 already. Correct me if I'm wrong. Thank you.
Followed procedure from root ML2, and now the screen is just at the boot animation with blue led for about 5 minutes now, i messed up, need the 4.4.2 odin files
help
--------------------------------------------------------------------------------
hey I tried doing your root method after updating to 4.4.2 and after I flash the pwned file with odin everything goes fine but my usb debugging will not com up at all so I cant even root and im stuck with android version 4.3 but my baseband version is i537ucucn9 and that's 4.4.2 and nothing works no wifi no data no calls no nothing could you help or point me to anything cause I cant even use my phone. Thanks
Xanthos58 said:
Followed procedure from root ML2, and now the screen is just at the boot animation with blue led for about 5 minutes now, i messed up, need the 4.4.2 odin files
Click to expand...
Click to collapse
Same, need 4.4.2 odin files
primeboss said:
Same, need 4.4.2 odin files
Click to expand...
Click to collapse
Ok i got out of this state, you need the ML2 cp and csc files and the original kernel for ML2 flash them and youll be good
You guys should try flashing the 4.3 Odin package and starting from there. I know I have a lot of modified system apps, so I'm likely going to re flash 4.3 just to make sure I'm stock. Thanks again sunderwear!! Good luck rooting everyone. I'll post back with an update in a bit!!
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app
Xanthos58 said:
Followed procedure from root ML2, and now the screen is just at the boot animation with blue led for about 5 minutes now, i messed up, need the 4.4.2 odin files
Click to expand...
Click to collapse
primeboss said:
Same, need 4.4.2 odin files
Click to expand...
Click to collapse
You guys dont need to , just go to recovery and Factory Rest thats all , its happens to me too
what about us 4.2.2 stock rooted users?
I'm sure most S4 Active owners are still on 4.2.2 rooted. What is the best procedure for us?
Should i unroot my phone via SuperSU then accept the stock 4.4.2 OTA update, then follow the method in the OP?
Or can i leave it rooted and flash stock 4.4.2 via Odin and then follow the OP?
akjimbo said:
I'm sure most S4 Active owners are still on 4.2.2 rooted. What is the best procedure for us?
Should i unroot my phone via SuperSU then accept the stock 4.4.2 OTA update, then follow the method in the OP?
Or can i leave it rooted and flash stock 4.4.2 via Odin and then follow the OP?
Click to expand...
Click to collapse
I was in a similar position with being rooted on 4.3 ML2 (Sunderwear's method). I unrooted thru SuperSU, unfroze everything under TiBU, unchecked every module under xposed framework, reboot phone then proceeded to uninstall all my root apps. I then did a factory reset, then I flashed back to the stock 4.3 under ODIN and following that I took the 4.4.2 OTA successfully.
In the end it's up to you, but IMHO I consider it wise to begin anew with a fresh clean phone.
Yes if you get stuck after downgrading system you must do a factory reset otherwise you'll get stuck in the ATT LOGO.
sunderwear thank you I downloaded it kitkat zip file. I flashed it with safestrap and then I flashed suprSu then I reboot the phone won't boot ... I flushed with Odin the kernel 4.4.2 every things works greats
Sent from my SAMSUNG-SGH-I537 using xda app-developers app
tet1 said:
sunderwear thank you I downloaded it kikat zip file I flashed it with safestrap and the I flashed supruser I reboot my phone won't boot then I flushed with Odin the kernel 4.4.2 very things works greats
Sent from my SAMSUNG-SGH-I537 using xda app-developers app
Click to expand...
Click to collapse
Glad to hear it worked for you. REMEMBER EVERYONE YOU MUST FLASH THE KITKAT KERNEL AFTER FLASHING the kitkat.zip update.
I was on ML2 with root .. and I did the stapes above
Sent from my SAMSUNG-SGH-I537 using xda app-developers app
So I can't lock the screen no matter what it is set to. Any way to fix?
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app

please help

Hello, i want to go back to stock rom on my galaxy s5. I am not bricked or anything like that. Every tutorial i look at, it involves using odin, and i cannot do that. I am on the Extreme Debloat ATT V1 running 4.4.2 kitkat. I don't have a md5 file to flash yet because i do not want to download a wrong file and screw up my phone. I don't have a computer at the time, so is there any way i can just download the file straight from my phone and copy it to root and go to recovery and wipe the device and then flash? thank you.
jeffcojake said:
Hello, i want to go back to stock rom on my galaxy s5. I am not bricked or anything like that. Every tutorial i look at, it involves using odin, and i cannot do that. I am on the Extreme Debloat ATT V1 running 4.4.2 kitkat. I don't have a md5 file to flash yet because i do not want to download a wrong file and screw up my phone. I don't have a computer at the time, so is there any way i can just download the file straight from my phone and copy it to root and go to recovery and wipe the device and then flash? thank you.
Click to expand...
Click to collapse
Go back, it means you are already rooted and that, so why don't you just go to recovery and wipe/delete etc, and launch your system
normally, then connect to the internet and download a stock image (.zip), put it on your external sd card, go back to recovery and flash it.
I hope that helped you cause that what I could get from your post,
Best Regards.
EngAymanAlMarashdeh said:
Go back, it means you are already rooted and that, so why don't you just go to recovery and wipe/delete etc, and launch your system
normally, then connect to the internet and download a stock image (.zip), put it on your external sd card, go back to recovery and flash it.
I hope that helped you cause that what I could get from your post,
Best Regards.
Click to expand...
Click to collapse
If I wipe/delete first, I won't be able to launch me system normally because there will be no system to boot to. And I don't know what zip file to download for my specific device
jeffcojake said:
If I wipe/delete first, I won't be able to launch me system normally because there will be no system to boot to. And I don't know what zip file to download for my specific device
Click to expand...
Click to collapse
OK don't wipe, a second thought, just download the stock rom
http://www.idroidspace.com/official-stock-rom-for-samsung-galaxy-s5/
jeffcojake said:
If I wipe/delete first, I won't be able to launch me system normally because there will be no system to boot to. And I don't know what zip file to download for my specific device
Click to expand...
Click to collapse
Or try this
http://forum.xda-developers.com/showthread.php?t=2785185
"You stay classy San Diego"
Sent from my G900A powered by XKRom GoldLimiTed.
s5freak said:
Or try this
http://forum.xda-developers.com/showthread.php?t=2785185
"You stay classy San Diego"
Sent from my G900A powered by XKRom GoldLimiTed.
Click to expand...
Click to collapse
I don't have access to odin. But thanks though, I found a different ROM I liked
jeffcojake said:
I don't have access to odin. But thanks though, I found a different ROM I liked
Click to expand...
Click to collapse
Good luck and safe flashing??
"You stay classy San Diego"
Sent from my G900A powered by XKRom GoldLimiTed.

[How-To] Root GS5 Active - G870A_OA1 - 4.4.4 (2/7/2015)

**Make certain that your reactivation lock in security settings is off before beginning this process**
1. Take the OA1 OTA update.
2. Download and install Towelroot-v3.apk(this version does not require internet access).
3. Place your phone into "Download Mode" (press and hold the Home, Volume Down, and Power keys until the phone powers on and displays warning screen, then press Volume Up key) and flash the G870A_NE4_Stock_Kernel using Odin's PDA slot(AP in Odin v3.09+).
4. Open the Towelroot app from your app drawer and press "Make it Rain" to root your device.
5. Power off then boot into "Download Mode" again and flash the G870A_OA1_Stock_Kernel also using Odin's PDA slot(AP in Odin v3.09+).
6. Install SuperSU to manage root access. Done!
Troubleshooting:
1. Should the OA1 OTA update fail consider flashing the G870AUCU1ANE4_Full_Odin.tar to return to factory stock then take the OTA updates to OA1. Or, place the G870A_NE4_to_NG3_OTA.zip and G870A_NG3_tA1_OTA.zip onto your ext-sdcard and sideload each file from stock recovery beginning with the G870A_NE4_to_NG3_OTA.zip. Once updated to OA1 continue from Step 2 above.
2. When flashing the kernel the most common cause of an Odin flash failure is a bad usb port or cable. Please check before reporting a failure!
Notes:
1. The above process will not affect your User Data or Knox Warranty Flag.
2. After flashing the NE4 kernel your phone will run a little wonky and towelroot may not root on the first try. If that happens reboot and try towelroot once again. Once rooted and after flashing the OA1 kernel your phone will once again run like a champ!
Alternative Method for Safestrap Users:
1. Place the G870A_OA1_100%_Stock_Rooted_ROM onto your ext-sdcard.
2. From Safestrap recovery press "Backup" and backup your User Data.
3. From the main menu press "Wipe" then perform an "Advanced Wipe" and wipe everything but your ext-sdcard.
4. Next, press "Install," then select and install the G870A_OA1_100%_Stock_Rooted_ROM.
5. Once complete, press "Restore" and restore your User Data.
6. Last, from the main menu press "Reboot," then "System." Done!
After following the above process your phone will pause on the AT&T splash screen for about 2 minutes before rebooting.
Notes:
1. The above process will not affect your User Data or Knox Warranty Flag.
2. The ROM will update your Modem, Non-hlos, System, Kernel, Stock Recovery, and Bootloader to OA1.
3. The "Backup" and "Restore" steps in the instructions are not mandatory but will greatly reduce your device's set-up time. All currently installed non-system apps and settings will be automatically restored.
4. The ROM does not contain BusyBox which is required by the Safestrap.apk. Download the BusyBox Installer to re-install BusyBox.
Let me be the first to comment...I rooted doing this but since I was already rooted I had to Odin back to ne4 then ng3 (sideload or ota, what ever works) and then update to oa1 (sideload or what ever works). After that, everything is exactly as the tutorial says.
Sent from my SAMSUNG-SM-G870A using Tapatalk
Did you have to revert just the kernel or the whole ROM before you could install the OTA update? I'm currently Towelrooted on NG3 and patiently awaiting the OTA download.
bigric_tx said:
Did you have to revert just the kernel or the whole ROM before you could install the OTA update? I'm currently Towelrooted on NG3 and patiently awaiting the OTA download.
Click to expand...
Click to collapse
I had to Odin the whole ne4 Rom and then from there use the ota update files to get to oa1 and then use the kernel trick to root with towelroot. Other wise it kept giving me signature errors even if I Odin'd just the system partition
Sent from my SAMSUNG-SM-G870A using Tapatalk
Can anyone tell me whether the G870AUCU1ANE4 full odin tar file will reinstall previously deleted system files or not. I was thinking of using titanium backup to remove a lot of bloatware but want to know first if this will get me back to stock with all factory equipped apps. When I flashed this full odin tar so that I could update and then reroot, my home screen and all my apps went unchanged so I'm skeptical to believe it's similar to flashing the phone back to stock.
thank you for any help
nhautotech said:
Can anyone tell me whether the G870AUCU1ANE4 full odin tar file will reinstall previously deleted system files or not. I was thinking of using titanium backup to remove a lot of bloatware but want to know first if this will get me back to stock with all factory equipped apps. When I flashed this full odin tar so that I could update and then reroot, my home screen and all my apps went unchanged so I'm skeptical to believe it's similar to flashing the phone back to stock.
thank you for any help
Click to expand...
Click to collapse
Yes it will
Sent from my SAMSUNG-SM-G870A using Tapatalk
bigwillyg said:
Yes it will
Sent from my SAMSUNG-SM-G870A using Tapatalk
Click to expand...
Click to collapse
So it will replace deleted system apps but leaves user installed apps alone?
Will performing a factory reset on this phone replace deleted system apps?
The phone i had prior was an s2 and when using odin to flash it with a stock rom, it would be similar to factory resetting it but when i flashed the full ne4 on this one, I still had all my apps and home pages, settings etc. I know the flash worked cause i was able to install the update that i couldn't before flashing due to towelroot.
I just realized the full ne4 file linked to in this thread (.rar zip file) isn't exactly the same as the stock firmware file available from sammobile (zip zip file). Is the ne4 .rar file linked to here modified to leave the users apps and settings alone?
Thanks. Worked great. :good:
I used safestrap. Very easy, after days of annoying update notifications.
nhautotech said:
So it will replace deleted system apps but leaves user installed apps alone?
Will performing a factory reset on this phone replace deleted system apps?
The phone i had prior was an s2 and when using odin to flash it with a stock rom, it would be similar to factory resetting it but when i flashed the full ne4 on this one, I still had all my apps and home pages, settings etc. I know the flash worked cause i was able to install the update that i couldn't before flashing due to towelroot.
I just realized the full ne4 file linked to in this thread (.rar zip file) isn't exactly the same as the stock firmware file available from sammobile (zip zip file). Is the ne4 .rar file linked to here modified to leave the users apps and settings alone?
Click to expand...
Click to collapse
I hadn't looked at the one on here but if it's a .tar.md5 then flashing through Odin should reset it back to ne4 stock out of the box with everything. I used the firmware to fully go back to stock
Sent from my SAMSUNG-SM-G870A using Tapatalk
I rooted for the 1st time since getting my new s5 active. Well, it came w/3NG build; Got the OTA BEFORE my 1st attempt at root.
I installed ND via Odon, made it rain, rebooted, & am still on 4.4.4 (0A1A or something of the like.
Didn't even have to follow (or get to) the step to Flash newer kernal to get back to 4.4.4. Thanks all involved
gitardan17 said:
I rooted for the 1st time since getting my new s5 active. Well, it came w/3NG build; Got the OTA BEFORE my 1st attempt at root.
I installed ND via Odon, made it rain, rebooted, & am still on 4.4.4 (0A1A or something of the like.
Didn't even have to follow (or get to) the step to Flash newer kernal to get back to 4.4.4. Thanks all involved
Click to expand...
Click to collapse
You need to flash the newer kernel because your phone could have issues
Sent from my SAMSUNG-SM-G870A using Tapatalk
@muniz_ri Your rooted stock rom worked like charm. Thanks bunch!
You were right bigwillg. Didn't really get a chance to test it 1st. After noticing choppy stuff & a bigger than usual battery drain, I "Odin'ed" the newer kernal. Now its like butter. Still on stock ROM with frozen bloat stuff. Considering uninstalling em all together at a future date. Gonna get to know my phone 1st I guess.
In case I didn't already hit thanks on OP, I soon will. And on a side note THANK you for this topic/forum.
Edit: Watch them push lollipop now. Literally right after I did this. Lol
Hi. Question? Does the Odin in the first post work on the phone, or would I need to use Odin on a PC? Sorry...been out of the scene for awhile lol
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
sailzfast said:
Hi. Question? Does the Odin in the first post work on the phone, or would I need to use Odin on a PC? Sorry...been out of the scene for awhile lol
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
Click to expand...
Click to collapse
Odin is for your computer
Unable to install latest OTA
My G870A was rooted before the previous OTA was sent.
This latest OTA gets to about 27%, then fails.
I have looked around to see how to fix this, yet I can't seem to find anything.
The steps here start with the OTA, so they're currently useless to me.
I have tried going back to 4, but towelroot has no way to remove root once set.
SuperSU mentions a removal of root, but it appears to be just to uninstall itself.
Anyone have any ideas?
Andy
llandyw said:
My G870A was rooted before the previous OTA was sent.
This latest OTA gets to about 27%, then fails.
I have looked around to see how to fix this, yet I can't seem to find anything.
The steps here start with the OTA, so they're currently useless to me.
I have tried going back to 4, but towelroot has no way to remove root once set.
SuperSU mentions a removal of root, but it appears to be just to uninstall itself.
Anyone have any ideas?
Andy
Click to expand...
Click to collapse
You need to review the OP more thoroughly.
I repeated the steps, and this time it worked.
Don't know why it didn't work the first time. I don't think I missed any steps.
Andy
odin app?
Im currently stock not rooted was wondering if i absolutely need to use a pc to root my gs5active, or does the odin app work? No pc access, all i have is my phone and a asus memo pad, thanks ; )
Hello,
I am with tmobile with G870A with Ne4 modem rooted. Can I just flash the OA1 modem?

Categories

Resources