Haven't used Odin to go back to stock since I owned the galaxy s vibrant, haven't had a Samsung phone since. I need to go back to stock but the thread in "General" that's stickied doesn't have the directions or link to the file needed, unless I'm just blind and dumb. I seen a stock zip but not how to flash it using Odin. Would someone please link me or give a quick run down what to do? Thanks!
C-4Nati said:
Haven't used Odin to go back to stock since I owned the galaxy s vibrant, haven't had a Samsung phone since. I need to go back to stock but the thread in "General" that's stickied doesn't have the directions or link to the file needed, unless I'm just blind and dumb. I seen a stock zip but not how to flash it using Odin. Would someone please link me or give a quick run down what to do? Thanks!
Click to expand...
Click to collapse
You need to go to http://SamMobile.com and download the
official Note 3 Tmobile NJ7 firmware.
Model: SM-N910T
Model name: GALAXY Note 4
Country: USA (T-Mobile)
Version: Android 4.4.4
Changelist: 2796035
Build date: Fri, 10 Oct 2014 11:20:19 +0000
Product Code: TMB
PDA: N910TUVU1ANJ7
CSC: N910TTMB1ANJ7
MODEM: N910TUVU1ANJ7
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Be sure to do a full complete wipe and do a factory reset before flashing.
Good luck!
Related
Hello,
It is the first time when trying to change ROM on my galaxy s. Before I start I want to be sure I take the right steps.
First of all some info about my phone:
PDA version is I9000BUJS3
PHONE: I9000BUJS1
CSC: I9000GATLJS2
I downloaded the ROM via Check Fus Downloader from samsung:
CSC: I9000GATLJP5
Phone: I9000BUJP5
PDA: I9000BUJP7
All I need to do now is to run odin and select the .tar file in the PDA field, correct?
Code:
Procedure:
1.Open ODIN. (And close Kies, if you have it open. It is important to have ODIN open BEFORE connection the phone via USB!)
2.Select the PDA/Modem/CSC/.PIT files in Odin. (For kernel flashes, only PDA is required. For FW flashes, .PIT and at least a PDA is required. Some PDAs have Modem and CSC integrated. Make sure you have the correct .PIT file. Usually 512.pit)
3.Check the "Re-Partition" checkbox. (Only do this if you have separate packages for PDA, Modem and CSC! Don't do this for single PDA flashes or kernel flashes!)
4.Turn the phone into the download mode by pressing and holding VolumeDown+Home+Power.
5.Connect your phone with your computer and wait until the drivers are installed.
6.When the drivers are installed, click Start.
7.The phone will be flashed and once it’s finished, it will boot up. (Do NOT disconnect the usb-cable, remove the battery or otherwise interrupt this process!)
8.You have successfully flashed your phone.
My phone was sim locked when I bought it ( now is unlocked, i suppose it will stay unlocked after upgrading).
Thank you!
Be carefull to flash firmware your phone need to be sim unlocked and network unlocked.Lot of people dont check this.See the post about it.
[email protected]
your phone will stay unlocked
and your instructions above are fine
should that fail - you may need a 2.3 rom with all 3 files instead of the 1 .tar file
azzledazzle said:
your phone will stay unlocked
and your instructions above are fine
should that fail - you may need a 2.3 rom with all 3 files instead of the 1 .tar file
Click to expand...
Click to collapse
How to know for sure? And if will fail it will leave my device in an unstable state?
And another question: Does the bootloader for 2.2.1 work with 2.3 ?
I think you actually need the stock FroYo bootloader to upgrade to 2.3? I may be incorrect, don't quote me. 2.3.3 has its own bootloader I believe.
Hi All!
Just upgraded today my Galaxy S from Froyo to Gingerbread and I'm not quite happy about it.
Is there any possibility to rollback Gingerbread to Froyo?
Any advise will be appreciated!
Yes, it's possible to rollback. It's little trickier though because the Gingerbread bootloader vs the Froyo bootloader.
You have to make sure your filesystem is RFS and not EXT4 (lagfixed). If it's stock and didn't convert then it's RFS.
Then make sure you can get into download mode (Vol Down + Home then power and hold). If you can, these are the general steps you have to do:
1) go to http://forum.xda-developers.com/showthread.php?t=846913&highlight=stock and download the froyo stock firmware for your phone that comes with a froyo bootloader (this is very important because you'll be stuck in a boot loop if you run froyo on a gingerbread bootloader)
2) extract the file to a known directory
3) put your phone into download mode
4) start ODIN
5) plug in your phone while in download mode
6) check the options in ODIN like it shows in the picture under "How to flash with three files:" plus check "Phone bootloader update"
7) select the files you downloaded and select the proper PIT file (these are firmware dependant)
8) click start to flash
I say these are the general steps because I'm not sure which area you are in. If you can provide the current firmware you have by punching *#1234# in the dialer, we can give more specific infor.
PDA:I9000XFJV5
phone: I9000XXJVQ
CSC: I9000OROJV1
Build Info: Wed Jul 13 12:21:52 CEST 2011
Thanks a lot for advises!
Hmmm...that's weird are you sure this is right?
PDA:I9000XFJV5
How did you upgrade it to Gingerbread? Was it through ODIN?
Grab a stock froyo FW from samfirmware.com (plug in the pda, phone, pit, and csc files) and make sure you repartition it in Odin to wipe your phone clean.
Hopefully you should be all good after that...
Sent from my GT-I9000 using xda premium
install stock froyo rom using odin... i guess
btw, do we need to tick update bootloader?
Sent from my GT-I9000 using Tapatalk
Hello, I have Samsung i9000 and at the moment I have 2.3.6 version firmware,
Baseband version - I9000XDJV1
Kernel version - 2.6.35.7-I9000XWJW5-CL1045879
Build number - GINNGERBREAD.XWJW5
I would like downgrade to 2.3.5, so could you tell me please where can I find files to downgrade 2.3.5 ? You know it's lots of 2.3.5 version but I am worried which one would be suitable for my phone.
Thanks indeed,
Ed
You have to use Odin and this file http://www.mediafire.com/?edl0ud20oxae25x this url drive you to a stock 2.3.5 rom who is probably compatible with your country.
I think you need to download the *JVS firmware, that corresponds at 2.3.5 firmware.
(add www) multiupload.nl/UQR3XQKJ22 <== Here there is an italian version of firmware, but i think that still work for latvia.
Istructions: (for odin)
0: Click on repartition
1: insert pit512 on pit
2: insert on pda CODE_I9000XXJVS_CL565837_REV03_user_low_ship
3: insert on phone MODEM_I9000XXJVS_REV_00_CL1059471
4: insert on csc GT-I9000-CSC-MULTI-OXAJVS
5: Reboot your galaxy S in download mode – Press at the same time:: Down Volume, Home + and power.
6: Open Odin and wait 30 sec, a yellow botton appear (COM:XX)
8: Click on start and wait the finish of the operation.
9: Enjoy your firmware!
You can read a guide for this forum.hdblog.it/f140/%5Bfirmware%5D-samsung-galaxy-s-i9000-xxjvs-2-3-5-disponibile-45547/
this guide should work, but wait, i search the right firmware for latvia.
jumpin666 said:
I think you need to download the *JVS firmware, that corresponds at 2.3.5 firmware.
(add www) multiupload.nl/UQR3XQKJ22 <== Here there is an italian version of firmware, but i think that still work for latvia.
Istructions: (for odin)
0: Click on repartition
1: insert pit512 on pit
2: insert on pda CODE_I9000XXJVS_CL565837_REV03_user_low_ship
3: insert on phone MODEM_I9000XXJVS_REV_00_CL1059471
4: insert on csc GT-I9000-CSC-MULTI-OXAJVS
5: Reboot your galaxy S in download mode – Press at the same time:: Down Volume, Home + and power.
6: Open Odin and wait 30 sec, a yellow botton appear (COM:XX)
8: Click on start and wait the finish of the operation.
9: Enjoy your firmware!
You can read a guide for this forum.hdblog.it/f140/%5Bfirmware%5D-samsung-galaxy-s-i9000-xxjvs-2-3-5-disponibile-45547/
this guide should work, but wait, i search the right firmware for latvia.
Click to expand...
Click to collapse
sorry, but your first link doesn't work...
eddyys said:
sorry, but your first link doesn't work...
Click to expand...
Click to collapse
Download the firmware you need from here http://forum.xda-developers.com/showthread.php?t=1102881
Hey
This site has all original firmwares for all Samsung phones..
www.sammobile.com
Sign up,goto firmware download the firmware,flash guide,flash programs..
Its simply and easy..check..
Cheera
Sent from my GT-I9000 using xda app-developers app
can someone tell me please, which version do I need download from http://forum.xda-developers.com/showthread.php?t=1102881 if I want downgrade to 2.3.5 ? I am scared to confuse.
eddyys said:
can someone tell me please, which version do I need download from http://forum.xda-developers.com/showthread.php?t=1102881 if I want downgrade to 2.3.5 ? I am scared to confuse.
Click to expand...
Click to collapse
There is only 2.3.5 for Europe, so just use the first one, as you seem to be on currently also using the European baseband
xsenman said:
There is only 2.3.5 for Europe, so just use the first one, as you seem to be on currently also using the European baseband
Click to expand...
Click to collapse
thanks! I have downloaded this odin version - Odin v1.82 which 'pit' file do I need use for downgrading ?
s1_odin_20100512
s1_odin_20100513
s1_odin_20100803
also I have windows 7 and when my phone is in 'download mode' it won't show up on Odin.. it's saying windows can't find driver etc. what i have to do ?
Use s1_odin_20100512.pit
the drivers you need come with Samsung Kies, either download that or get just the driver from here: http://forum.xda-developers.com/showthread.php?t=961956
thanks indeed, it works, everything works now, thank you all
Model: GT-S5570I
Model name: Galaxy Mini Plus / Pop Plus
Country: Italy
Version: Android 2.3.6
Build date: Fri, 11 Oct 2013 07:52:35 +0000
Product Code: ITV
PDA: S5570IXIMJ1
CSC: S5570IITVMJ1
MODEM: S5570IXXMF1
Courtesy of Sammobile for ROM and Information
The package contains everything needed to flash the stock rom either for changing into a custom rom or fixing a semi-bricked device.
Instructions:
1. Download file
2. Extract using 7zip
3. Open odin
4. Follow picture attached on how to place files
5. Boot phone into download mode by turning off your device and pressing power + vol up + home
6. Press up when prompted
7. Click start on Odin
8. If device takes more than 10min to boot, go to recovery by turning off and pressing power + vol down + home and wiping data / factory reset
9. You should be able to boot back to a clean, latest version of GB
Click to expand...
Click to collapse
This contains everything including odin, bootloader, modem, CSC, PDA and PIT file. Drivers are included in the attachment of this post.
Download links:
Google Drive
Mediafire
Driver:
See attached
Click to expand...
Click to collapse
Have fun romming and tweaking this device
Well done, a favorite question at noob "where to take Italy stock rom?"
Would not hurt to add about Samsung USB Drivers and about languages in this stock..
bump
The instructions don't really include where to put which files, and which options to tick. The image mentioned in first post does not show.
OP, please update first post with more detailed instructions, or reupload mentioned image.
Sent because I <3 Aerith
Yesterday I made an update note 4 and can not do root, I can go down to lollipop
HELP PLEASE¡¡¡:crying::crying::crying:
kiikez said:
Yesterday I made an update note 4 and can not do root, I can go down to lollipop
HELP PLEASE¡¡¡:crying::crying::crying:
Click to expand...
Click to collapse
Use Odin to go back to previous firmware or just go back to lollipop. Download the right firmware for your device, download Odin 3.10.7 or the latest.....put your phone in download mode then open Odin go to AP in Odin select the firmware u download... select the the file and click start. ( Before all this make sure u wiped your phone first after backing up all your important data's) for more step by step....go follow @OvrDriVE for straight up instructions
Sent from my SM-G935T using Tapatalk
weakenfalls01 said:
Use Odin to go back to previous firmware or just go back to lollipop. Download the right firmware for your device, download Odin 3.10.7 or the latest.....put your phone in download mode then open Odin go to AP in Odin select the firmware u download... select the the file and click start. ( Before all this make sure u wiped your phone first after backing up all your important data's) for more step by step....go follow @OvrDriVE for straight up instructions
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
They say that this compilation can not Downgrade "N910TUVS2EPG2"
IS TRUE..!!
weakenfalls01 said:
Use Odin to go back to previous firmware or just go back to lollipop. Download the right firmware for your device, download Odin 3.10.7 or the latest.....put your phone in download mode then open Odin go to AP in Odin select the firmware u download... select the the file and click start. ( Before all this make sure u wiped your phone first after backing up all your important data's) for more step by step....go follow @OvrDriVE for straight up instructions
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
They say that this compilation can not Downgrade "N910TUVS2EPG2"
IS TRUE..!!
i'm so confused.
Anyways I have heard of some people being able to go back down, downgrading from EPG2 so -- quit the double posting, and just try some stuff out.
DOK2 Bootloader: https://www.androidfilehost.com/?fid=24269982087008410
DOK2 Modem: https://www.androidfilehost.com/?fid=24269982087008409
Use Odin 3.0.9 (What this member specifically used and I use it personally)
https://www.androidfilehost.com/?fid=23321874045862094
Boot your device into download mode
Flash these two files
Tell us if it succeeds or if it gives you an error, and if so what was the error?
Also you may want to flash a 5.1.1 ROM with that 5.1.1 Bootloader and modem.
If this doesn't work report back to us and maybe some more exotic stuff can work.
@kiikez Look my Tutorial here >>>> http://forum.xda-developers.com/showthread.php?p=68064806#post68064806 follow allll the instruction and hit a thanks button ������ thanks!