I can't get 4G on my XT1060 (Verizon, unlocked bootloader) with the Rogers 4.4.4 stock ROM. I realize the Rogers rom is for the XT1058. After doing some research, I flashed over to the Rogers ROM because I use the phone on Telus while in Canada, and couldn't get LTE working properly on the Verizon 4.4.4 stock rom. After flashing the Rogers ROM, I flashed the appropriate radio for the XT1060 on 4.4.4.
I have the phone info app that allows me to set LTE/CDMA auto (PRL), but no luck in getting VZW LTE working yesterday when I was within a good solid LTE coverage area. I even tried "LTE only," which gave me no reception at all.
Am I going to have to flash back to a stock VZW rom? (sigh) Is there some tweak I can make to cause the phone to grab VZW LTE while running a non-VZW rom?
If not, what about making the VZW stock rom play nice with the Telus HSPA/LTE network (basicially the same as AT&T's network). I found the VZW stock 4.4.4 rom would often lose reception for minutes at a time, showing no bars at all. Turning LTE off fixed the problem. Telus has an excellent LTE network up here and I don't want to be limited to HSPA.
Related
This problem is not new with verizon phones
You can search XDA for more info, check in Galaxy S3, S4 or Nexus 5 forum
My customized MOTO X from verizon not taking a GSM sim in india.
I tried many sims from different carries, but failed.
It showing full bars with carrier logo, but no calls and sms, only data is working.
When i tried to call someone it shows "Mobile Network not available".
I check IMEI, it is in good condition
and one more thing
When i putting my IMEI on imei.info
It showing XT1055 which is us celluar.
But my one is XT1060
I have bootloader unlocked, flashed cyanogen, sprint rom, roggers rom but no luck.
and my moto x is working with CDMA OMH sim
I do not why it is acting like a us celluar MOTO X which accepts only CDMA sims
Now i am on 4.2.2 Verizon ROM, GSM sim is not working, Showing "Mobile network not available"
I had the same issue after a friend of mine used my VZW MotoX on TMobile.
He upgraded for 4.4 to 4.4.2 while he had it running on TMo. I think that the update has broken the radio.
After .sbf back to VZW stock everything works great
I think it may be IMEI problem..
help get my moto x back on vz - not able to make calls
toastedoats said:
I had the same issue after a friend of mine used my VZW MotoX on TMobile.
He upgraded for 4.4 to 4.4.2 while he had it running on TMo. I think that the update has broken the radio.
After .sbf back to VZW stock everything works great
Click to expand...
Click to collapse
I thik that's what's happened to me - tried my verizon motox on tmobile but since couldn't make wifi calls didn't want to keep it- want it back on verizon- what do you mean after .sbf back to stock works great--what do I need to do - -i've done factory resets -tried lte on off apps...etc --please help
There's 100 people out there trying to use vs980 on Tmobile,we see many posts prior to kk update of people showing images and giving detailed ways to enable lte or Any data period,
As it stands now for some,reason vzw g2 will not allow any tmobile data let alone lte or hspa on the kk vs98024A firmware '
Someone had got to know its either something to do with stock vzw firmware or some,kind of block or what? No apn settings In this world work While on official kk
But when the jb 11a and 12b was around stuff worked
Is there a work around a valid and knowledgeable work around or fix Anyone with correct knowledge of this issue have any input?
Otherwise I'm,selling the phone today.
We can use note 3 easily enuff and vzw iPhones out of the box but the Vzw g2 isn't being easy
Its almost as if all the talk of working data is comic, and people standing by their word of being able to flash T-Mobile g2 rom on this variant with a patch. Zip
Any help would help many
Thanks
lojak29 said:
There's 100 people out there trying to use vs980 on Tmobile,we see many posts prior to kk update of people showing images and giving detailed ways to enable lte or Any data period,
As it stands now for some,reason vzw g2 will not allow any tmobile data let alone lte or hspa on the kk vs98024A firmware '
Someone had got to know its either something to do with stock vzw firmware or some,kind of block or what? No apn settings In this world work While on official kk
But when the jb 11a and 12b was around stuff worked
Is there a work around a valid and knowledgeable work around or fix Anyone with correct knowledge of this issue have any input?
Otherwise I'm,selling the phone today.
We can use note 3 easily enuff and vzw iPhones out of the box but the Vzw g2 isn't being easy
Its almost as if all the talk of working data is comic, and people standing by their word of being able to flash T-Mobile g2 rom on this variant with a patch. Zip
Any help would help many
Thanks
Click to expand...
Click to collapse
Hey did you find any solution?
From my experience you can only get tmobile lte buy flashing cm11 or asop rom and editing apn for tmobile 4g lte.
Weird...
I'm on Stock rom uprooted. Using on TMobile and getting LTE. I keep the mobile network settings to global. After the 25b update, I have had issues where the data would disconnect until I restart phone. But it could be a bad Sim.
I'm on stock 24a and t-mobile lte data works fine for me on my vs980. I assume you guys have the right 4g/lte apn settings? If not, check here:
http://www.4gtricks.com/2013/04/t-mobile-4g-apn-t-mobile-4g-apn-settings.html
I also go into Settings>Tethering & Networks>Mobile Networks>System Select>Network Mode and change it to GSM first and then do a manual network search. I select the T-Mobile GSM network and when it says registered, I go back and change it back to global and 4g/lte works just fine.
I just purchased a Verizon-branded VS980, for use with Cityfone (on the Rogers network). I have no problems with voice calls, and my APN settings seem to have automatically populated from my SIM card and look correct. I believe this phone should be able to pick up LTE (700mhz) in my area, and it should support the hspa frequencies.
Anyway, I have rooted and installed cyanogenmod, but that had no effect. I've selected just LTE networks, just HSPA, or just GSM - it connects to HSPA and GSM, but I get data on neither. It shows GSM Disconnects: =======Data======= on the phone info screen
It was like this with the stock rom, and I have rooted and updated the ROM to Cyaonogenmod to see if that would change anything. It made no difference. I am using baseband 24A if that matters.
Can someone tell me what I'm missing?
I cannot get LTE at all on my vs980, using CloudyStock 2.6 and cannot get T - Mobile to receive LTE. On 24A band.
Fiddled with all the GSM settings and the fastest speed im getting is 4/0.3 contrary to a similar phone getting 50/28 so its not reception
Anyone have this problem? THanks in advance
I am switching from Verizon to T-Mobile this week so I'd like to know if your able yo get this to work. I don't have a T-Mobile sim yet so I can't test but from what I've read you just need to adjust your APN setting for T-Mobile. Have you tried this yet?
Good evening everyone!
I have a XT1097 on WIND, on 5.0.1 and I'm trying to get Rogers/Fido LTE working. It supports all of the bands but when I select LTE Preferred it defaults to HSPA+, and forcing LTE gives me no service. My brother has an unlocked XT1097 from Telus, on 5.0.1 and the Fido SIM works fine for LTE!
Checking the system settings, there are some software differences: Screencast Link.
How would I go about getting this working on my WIND XT1097? Replace just the baseband? Replace everything? Do I throw the Telus software on it or go for Motorola's OEM software?
TL;DR: I have an XT1097 purchased from WIND CANADA that won't connect to 2100/2600MHz LTE on other networks (proper SIM and all), even though the device supports it. Did WIND purposefully gimp the phone with a different baseband, and how can I fix it?
You can't. Wind doesn't pay Bell of Rogers for access to the LTE bandwidth. No changing of settings will fix that, only having a Bell or Rogers sim.
loftwyr said:
You can't. Wind doesn't pay Bell of Rogers for access to the LTE bandwidth. No changing of settings will fix that, only having a Bell or Rogers sim.
Click to expand...
Click to collapse
I think you've misinterpreted my question. I have a phone purchased from WIND (unlocked), and a Fido SIM with a plan. The Fido SIM inside the phone connects me to HSPA+ but not LTE. My guess is that the baseband has been modified by WIND/whoever they get their devices from to lock out the LTE radio, preventing me from connecting to Rogers/Fido LTE with a Fido SIM inside my WIND phone.
My Q: What would be the easiest way to go about getting that fixed? My guess would be to replace the baseband with one that won't lock out the LTE at the software level.
If you unlock the bootloader you can try the Telus firmware but I am sure there are others using the Wind mobile phone on Telus/Bell/Rogers/Fido/Koodo etc and they all get LTE just fine.
Have you tried resetting the phone to default?
Steve-x said:
If you unlock the bootloader you can try the Telus firmware but I am sure there are others using the Wind mobile phone on Telus/Bell/Rogers/Fido/Koodo etc and they all get LTE just fine.
Have you tried resetting the phone to default?
Click to expand...
Click to collapse
After backing everything up, a factory restore did it. I think I spent far too long overthinking this. Thanks for the info everyone!