Hi, I was just curious, is it possible with custom kernel to get louder incall volume. On stock kernel the volume is pretty low, much lower than other phones. Tried it on official rom, and several custom roms. Always same results, I mean, I can hear the person I'm talking to but only in a quiet environment, the volume is on max setting of course. Didn't really want to play with kernel but if it could help with the issue I would take the chance.
Genius10 said:
Hi, I was just curious, is it possible with custom kernel to get louder incall volume. On stock kernel the volume is pretty low, much lower than other phones. Tried it on official rom, and several custom roms. Always same results, I mean, I can hear the person I'm talking to but only in a quiet environment, the volume is on max setting of course. Didn't really want to play with kernel but if it could help with the issue I would take the chance.
Click to expand...
Click to collapse
It's obvious that you have a damaged speaker.. Plug in earphones and see if it's still low..
u should clean Speaker hole(small in left) with pin then it will blow sound. . same problem was with me after clean or very small hole on left site of speaker section now i can hear well
Hi,
I'm rooted, but I'd prefer to keep the stock kernel. Is there any way to gain better control over the volume? The lowest volume setting, for media/songs, etc., is entirely too loud for an office or in bed. I would like to avoid using my headphones 24/7.
Thanks!
terryt5231 said:
Hi,
I'm rooted, but I'd prefer to keep the stock kernel. Is there any way to gain better control over the volume? The lowest volume setting, for media/songs, etc., is entirely too loud for an office or in bed. I would like to avoid using my headphones 24/7.
Thanks!
Click to expand...
Click to collapse
*cough*porn*cough* I would feel weird watching 'media' in bed with my headphones on too. I haven't found a way of lowering the lowest volume setting yet though...
edit: there's a flashable mod by Matt here: http://forum.xda-developers.com/showthread.php?t=2299834 that gives finer control between steps (30/45 steps instead of stock 15) but doesn't lower the lowest step volume, hence the reason the lowest two steps are silent with the mod..
Hey guys!
I was using CM12 but I had to return to stock because some bad battery drain issues. When using a fix for WhatsApp audio recording (avaliable on the CM12 thread), I noticed a HUGE sound quality increase on my voice recordings - no more crappy telephone-like voices, it sounds clear without noises and stuff. I decided to try the same audio file for stock KK but unfortunately it is incompatible.
My question is: since the same hardware can provide two very diferent sound quality levels, what I need to do in order to achieve the same or similar sound quality in Stock 4.4.4 ROM? Is there a file where I can change sound parameters and make it work better?
Hi,
there is a way or settings to raise the volume of this phone ?
Both headphones and speaker have low volume.
If someone has a solution, please write it down.
Thanks.
anabolic_guy said:
Hi,
there is a way or settings to raise the volume of this phone ?
Both headphones and speaker have low volume.
If someone has a solution, please write it down.
Thanks.
Click to expand...
Click to collapse
If you have rooted your phone and found out a way to change the SELinux to permissive (I suggest using this and putting it through terminal emulator), you should use Viper4Android to somewhat amplify the speakers and greatly increase the volume threshold for headphones. Best of luck if you try this.
mechasnyper said:
If you have rooted your phone and found out a way to change the SELinux to permissive (I suggest using this and putting it through terminal emulator), you should use Viper4Android to somewhat amplify the speakers and greatly increase the volume threshold for headphones. Best of luck if you try this.
Click to expand...
Click to collapse
Hi,
I have already installed Viper4Android, but it does not amplify much the volume, neither in the speaker, neither in headphones, it changes a bit the quality, but it does not raise the volume as I wish...
Thanks anyway for the answer.
anabolic_guy said:
Hi,
I have already installed Viper4Android, but it does not amplify much the volume, neither in the speaker, neither in headphones, it changes a bit the quality, but it does not raise the volume as I wish...
Thanks anyway for the answer.
Click to expand...
Click to collapse
Did you try setting the UI to expert and adjusting the playback gain control in the headset settings?
mechasnyper said:
Did you try setting the UI to expert and adjusting the playback gain control in the headset settings?
Click to expand...
Click to collapse
Hi,
yes I tried, but volume is more or less the same...
Thanks 4 answer me.
Hey guys.
I'm new to Huawei devices, this is my first, but on my previous phones (LGs and Samsungs) I could edit mixer_paths.xml for an increase of volume. I have root already, but I couldn't find that file or any similar to modify... Can anyone point me in the right direction, please?
A little up, maybe someone comes up with another idea? Still would need help with increasing volume, please
Hello to everybody,
i thought i should share my unsuccessful attempts of getting more headphone volume with the P9 plus with you.
After recognising that it seems there is no software solution at the moment i ordered several different
headsets with a higher sensitivity than my former used.
The headphones i used during the last few years where really cheap ones which should have 95/96 SPL/V.
I informed a little and learned that every 10 SPL/V more gives you the impression of twice as much volume.
Next i bought the KZ ATE wich are stated to have 118 SPL/V and thought: nice i can kill my ears fast now...
I tried them and did not get any improvement at all. In my opinion they don't sound better and they are also not
playing louder. OK, cheap china-in ear, lets try another...
Now i bought the Sennheiser cx 2.00i which are more than three times the price and a well known brand. They are stated to have 119 SPL/V.
What should i say? They are not playing any significant louder.
There are even inears with 125 SPL/V but at the moment i don't think this will change anything.
Do i miss something?
Do you have a solution in the meantime?
best regards,
Henning
SPL has to do with the maximum decibels provided by the headphones, BUT did you look at how many ohms the headphones have? The impedance (measured in ohma) determines the power needed to.. Well, to power those speakers inside your headphones
As fat as I know, most phones can only give a decent enough power to 16 and 32ohm headphones, and not to anything above that...
I miss my LG and Samsung days... It was so easy to just modify the mixer_paths.xml files to get higher volume
Hello,
I've tried my best to make my title understable, but not sure if I succeeded
Basically what I want to do is to change the bluetooth volume control to have more volume levels. Now if I am listening to bt speaker it is either too loud or too quiet and nothing between.
My theory is that it should be possible to adjust the values of sound control in some file in rom.
I am not a programmer, but I remember I have done something similar on my Moto G, I've changed some values in a rom file and then flashed it.
I really don't remember how I have done it, but if there is someone who can tell how it can be done step by step, I would really appreciate it.
PS: I would like to change also volume for loud speaker, if possible to make it louder during calls, because I know it can play music louder
Thank you