Related
My Samsung Galaxy S purchased Oct 2010
Model number GT-I9000
Firmware version 2.1-update1
Baseband version I9000XXJM2
Kernel version 2.6.29
Build number ECLAIR.XWJM3
Running latest version of Samsung KIES on Windows 7. Trying to upgrade to OS to Froyo
When I connect my phone via usb I get notification
Installing device drivers
then
device driver software not successfully installed
MTP usb device Failed.
It seems Windows 7 is not recognising Android driver(s) on my phone. Is this a known/new issue? I connected my phone to a Windows XP machine and it recognised the phone straight away and was visible in KIES. Is there a setting in Windows 7 that needs to be adjusted perhaps? Can anyone offer a suggestion as to how to recify this problem?
not recognising Android driver(s) on my phone. Is this a known/new issue?
Multiple posts on the forum .
MTP usb device Failed. >>> search
jje
have you tryed to reinstall kies? and u can firs put phone on mass storage and wait to install drivers =)
I had an older version of KIES, did a search for Galaxy S updates, one of which was an updated version of KIES, now installed. I put the phone in mass storage mode, connected, then it told me to exit mass storage mode, had to disconnect in order to do so. Have searched MTP usb device on this site, read the archived entries and varied solutions, none of which work. Fairly sure its a Windows problem, because as I eluded to previously, it connects to Windows XP no problem.
Windows recognises my phone in Real Player mode, but not in KIES mode! KIES then says connection mode not supported, please connect in KIES mode, the Windows fails to recognise my phone.
rpjd said:
Windows recognises my phone in Real Player mode, but not in KIES mode! KIES then says connection mode not supported, please connect in KIES mode, the Windows fails to recognise my phone.
Click to expand...
Click to collapse
There is a lot of thread about it, but well...
Start fresh:
- Uninstall Kies (phone not connected)
- Clean your registry with ccleaner (google it)
- restart your PC
- Dowload the last 2.x Kies realeased from samsung website
- Install Kies as administrator
- Go in your SGS setting device -> Application -> devlopment -> Uncheck USB debugging
- Restart your phone (even if not needed, do it)
- When the phone is up, plug the USB cable.
No luck with that either!
rpjd said:
No luck with that either!
Click to expand...
Click to collapse
It should work no matter what:
Your windows 7 system have a problem somewhere (Drivers outdated?, antivirus?, firewall?, service not properly started? etc.. can be a lot of external things)
If you checked all that, it could be an hardware issue (i doubt that)
Are you using the stock USB cable right?
Anyway triple check everything, update, restart. It must work or you have or you are a very very very special case (i doubt that too).
Its an odd one alright
I'm reasonably confident, while not being an expert, that Windows is the problem, only wish I knew what exactly. I'm asking on Windows forums as well.
Hi to all,
I hope people here can help me solve my gt problem connecting with my pc (win7), I already download this Samsung_P1000_USB_Drivers and install to my computer, still Kies cannot detect my tab.
Some say you don't need any driver if you're using Win7 but why I encounter this problem.
Some say you need to turn off the USB Debugging before you connect your tab from your pc but still I encounter this problem.
Some say install the driver from Kies built-in driver but still encountering this problem.
My GT O/S still stock, its still intact since I out my GT from the box.
Please share me your experience if you encounter this problem and how you solve it, I can't flash any rom because my pc can't detect my tab at all.
Thank You and Regards to all.
[email protected] said:
Hi to all,
I hope people here can help me solve my gt problem connecting with my pc (win7), I already download this Samsung_P1000_USB_Drivers and install to my computer, still Kies cannot detect my tab.
Some say you don't need any driver if you're using Win7 but why I encounter this problem.
Some say you need to turn off the USB Debugging before you connect your tab from your pc but still I encounter this problem.
Some say install the driver from Kies built-in driver but still encountering this problem.
My GT O/S still stock, its still intact since I out my GT from the box.
Please share me your experience if you encounter this problem and how you solve it, I can't flash any rom because my pc can't detect my tab at all.
Thank You and Regards to all.
Click to expand...
Click to collapse
Can odin detects your tab? Another note is, is kies with the latest version?
fastcx said:
Can odin detects your tab? Another note is, is kies with the latest version?
Click to expand...
Click to collapse
Hi fastcx,
ODIN can't detect my GT, and I think I have the latest Kies which is version 2.0.0.11014_49.
Purchase in Riyadh
Some info of my gtab
PDA: P1000JPJK2
PHONE: P1000JXJK2
CSC: P1000JPJK1
Personalization Status
--------------------------------
Network Lock: Off
Networj Subset Lock: Off
SP Lock: Off
CP Lock: Off
Guys need your help regarding my problem.
Try to uninstall the drivers. You can do that with many uninstaller programs or you can use system restore. Go to settings and set galaxy tab connectivity to samsing kies. Connect your galaxy tab (make sure to disable debugging mode). Windows will install drivers which might take a few minutes. As for odin try to go to downloas mode by holding volume down and power button. If you get a yellow shade with com#. Your tab is recognised and connected.
Hope it helps!
Same issue with Kies not detecting SGT
I'm new to the forum, and a new SGT owner, so my knowledge is limited. I have been researching these forums along with some help from the unlockr.com. Kies would not detect my tab. I downloaded the Samsung New PC Studio, and was able to have my drivers downloaded through this software. My tab is now rooted. I still don't know what else to do with the rooted tab at this point, but I'm still researching.
dxwilliams40 said:
I'm new to the forum, and a new SGT owner, so my knowledge is limited. I have been researching these forums along with some help from the unlockr.com. Kies would not detect my tab. I downloaded the Samsung New PC Studio, and was able to have my drivers downloaded through this software. My tab is now rooted. I still don't know what else to do with the rooted tab at this point, but I'm still researching.
Click to expand...
Click to collapse
Hi dxwilliams40,
What Samsung New PC Studio version you have?
Can you give me the url where you get this software?
Also, can you give me the procedure on how you get the driver using this Samsung New PC Studio?
TIA.
DarkPal said:
Try to uninstall the drivers. You can do that with many uninstaller programs or you can use system restore. Go to settings and set galaxy tab connectivity to samsing kies. Connect your galaxy tab (make sure to disable debugging mode). Windows will install drivers which might take a few minutes. As for odin try to go to downloas mode by holding volume down and power button. If you get a yellow shade with com#. Your tab is recognised and connected.
Hope it helps!
Click to expand...
Click to collapse
Hi DarkPal,
I uninstalled all samsung drivers and kies but still gt is not detected by win7.
I tried also download mode by holding both power and down volume button and odin 1.3 and odin 1.7 not detect my gt.
Any more idea?
TIA.
[email protected] said:
Hi DarkPal,
I uninstalled all samsung drivers and kies but still gt is not detected by win7.
I tried also download mode by holding both power and down volume button and odin 1.3 and odin 1.7 not detect my gt.
Any more idea?
TIA.
Click to expand...
Click to collapse
This sound worrying When you plugged in to your pc, did your tab's battery icon change?
fastcx said:
This sound worrying When you plugged in to your pc, did your tab's battery icon change?
Click to expand...
Click to collapse
Yes, it goes to recharge mode, this is the only thing I can only use between my gt and my computer is to recharge.
To all XDA member's who have this problem before and solve it, please share it to me, I can't move from here I have a good device but I can't maximize the use of it.
Regards to all,
Yes as a matter of fact i have more ideas. Press on menu button while on home screen, go to settings then wireless network and then choose usb settings. Choose ask on connection, if your tab is set on kies. If its set on mass storage set on kies, we all know windows installs no drivers for mass storage. Also try connecting tab on other computer and see if it connects preferrably with other OS. Sorry to disagree still doesnt seem worrying because i faced problem with a samsung mp3 player which used to give me hell with connecting using mtp (media transfer protocol). If it connects to other computers download mtp protocol from microsoft website manually. I will dig it up for you if you report that its working on other computers. Also will dig drivers from my own W7 machine 64 bit to see if it helps.
EDIT did a quick search online. Connect your galaxy tab in kies mode WHIlLE installing kies. Seemed to help many android galaxy S users.
W7 PORTING KIT DOWNLOAD: http://msdn.microsoft.com/en-us/windows/hardware/gg463543
DarkPal said:
Yes as a matter of fact i have more ideas. Press on menu button while on home screen, go to settings then wireless network and then choose usb settings. Choose ask on connection, if your tab is set on kies. If its set on mass storage set on kies, we all know windows installs no drivers for mass storage. Also try connecting tab on other computer and see if it connects preferrably with other OS. Sorry to disagree still doesnt seem worrying because i faced problem with a samsung mp3 player which used to give me hell with connecting using mtp (media transfer protocol). If it connects to other computers download mtp protocol from microsoft website manually. I will dig it up for you if you report that its working on other computers. Also will dig drivers from my own W7 machine 64 bit to see if it helps.
EDIT did a quick search online. Connect your galaxy tab in kies mode WHIlLE installing kies. Seemed to help many android galaxy S users.
W7 PORTING KIT DOWNLOAD: http://msdn.microsoft.com/en-us/windows/hardware/gg463543
Click to expand...
Click to collapse
Hi DarkPal,
I do 1 by 1 your advice but in the ended it's still the same, I installed MTP from your link but my PC can't detect my GT.
I attached my GT from our 2 laptops both Win7 but they can't detect also my GT.
Hope you have more plan
TIA
Still more plans. I have phd with samsung devices not connecting to many windows pcs (dunno if faulty drivers submitted to microsoft by samsung or issue in an end user enviroment. Anyway few question: is your galaxy in usb debugging mode? Tap menu then choose settings applications development. Make sure USB is not in debugging mode.
EDIT: is the usb charging fine? Is there any USB detections on tab screen. I read reports of faulty usb cables. If you have another SGT cable try it and see if it connects.
If uave the luxury connect other mtp devices like ipod or ipad or othe media players. This will sure exclude a pc or OS problem.
EDIT2 Here is a guide i followed back in mp3 days:
Go to samsung support site and download latest samsung kies (must be latest) and uninstaller package.
If u still have kies uninstall it with this package. If not run it anyway to remove any residual files. A cleaner program will clean as well.
Reboot your pc and your SGT.
Install samsung kies (make sure you run it as an administrator whether setup or program launch).
Now in your galaxy tab make sure usb settings is set to kies.
Fire up kies and connect your galaxy tab.
If there is no signs of connections. Access device manager and look for any imprperly connected device (would show as a yellow exclamation mark or saying unknown device). Reinstall kies USB driver. Disconnect tab and reconnect.
Few important notes:
Connect tab directly to the pc not via usb hub or similar apparatus (tab takes power from pc as well as data).
Update your windows media player to latest version (i know its bloated and hogs system resources but it has latest mtp repositories).
Always execute command as an adminstrator. Whether launching or installing.
I had the same problem long time ago. I solved changing the USB port. Befor I used the front case one...the I switch the port in one of the back case and it was working without any issue. Try this. I hope it help!
DarkPal said:
Still more plans. I have phd with samsung devices not connecting to many windows pcs (dunno if faulty drivers submitted to microsoft by samsung or issue in an end user enviroment. Anyway few question: is your galaxy in usb debugging mode? Tap menu then choose settings applications development. Make sure USB is not in debugging mode.
EDIT: is the usb charging fine? Is there any USB detections on tab screen. I read reports of faulty usb cables. If you have another SGT cable try it and see if it connects.
If u have the luxury connect other mtp devices like ipod or ipad or othe media players. This will sure exclude a pc or OS problem.
EDIT2 Here is a guide i followed back in mp3 days:
Go to samsung support site and download latest samsung kies (must be latest) and uninstaller package.
If u still have kies uninstall it with this package. If not run it anyway to remove any residual files. A cleaner program will clean as well.
Reboot your pc and your SGT.
Install samsung kies (make sure you run it as an administrator whether setup or program launch).
Now in your galaxy tab make sure usb settings is set to kies.
Fire up kies and connect your galaxy tab.
If there is no signs of connections. Access device manager and look for any imprperly connected device (would show as a yellow exclamation mark or saying unknown device).
Click to expand...
Click to collapse
Hi Again;
Debugging mode is off when I tested all your instruction on my sgt.
I uninstall Kies restart, download from samsung Kies 2.0.0.11014_49 and install it again, restart, test sgt fail again.
Win7 detect my sgt when you put on usb.
My sgt can recharge on my win7.
iPhone 3gs, iPhone 4, Blackberry 9780, iPad Wifi+3g all working with the same usb I use for sgt.
I hope you still have option that we can test
it look like you having problem with the data cable..... do you have another cable to try!
Well 2 options. A trick I never understood by Samsung support. Remove the Cable from PC while on keys wait 30 seconds and repeat procedure 3 times. Hopefully it will detect.
Also Cable could be the culprit as Ironically All SGT don't have exact same cables. You have to make sure you buy exact stock cable if you need a replacement. Ebay cables fail almost always even if it does the charge function.
you said w7 detects SGT when you put on USB. What type of detection Care to elaborate?
DarkPal said:
Well 2 options. A trick I never understood by Samsung support. Remove the Cable from PC while on keys wait 30 seconds and repeat procedure 3 times. Hopefully it will detect.
Also Cable could be the culprit as Ironically All SGT don't have exact same cables. You have to make sure you buy exact stock cable if you need a replacement. Ebay cables fail almost always even if it does the charge function.
you said w7 detects SGT when you put on USB. What type of detection Care to elaborate?
Click to expand...
Click to collapse
" USB Device Not Recognized " error occur when you put sgt on my computer.
And the removal of USB cable doesn't work also.
This is the original cable came from sgt box, it's new like 3 months only, anyway I will try to buy another cable and I hope this will work.
But anything you want me to try much appreciated, dunno where I can find original sgt cable, specially you mention buying online we don't know if genuine from samsung.
tnx man.
If device shows in device manager with yellow excalmation mark right click and uninstall unplug and try to plug the device again. And I Think i found a solution as odd as it seems first remove all usb devices connected to your pc ,flash drives, phones, pdas etc . You can even uninstall it by removing these devices from the device manager to uninstall these drives completely so they can be identified newly. Here is the weird part shutdown i mean pull the plug on computer wait 5 minutes to restart. A cold boot forces computer to reidentify usb ports. Reconnect and see if it works.
Also update your pc motherboard controllers from your pc driver site if w7 doesnt natively identify it.
EDIT follow this link instructions: www.ntcompatible.com/Desperately_need_help_---_USB_Devices_Not_Recognized_t32356.html. Seem to helped others.
DarkPal said:
If device shows in device manager with yellow excalmation mark right click and uninstall unplug and try to plug the device again. And I Think i found a solution as odd as it seems first remove all usb devices connected to your pc ,flash drives, phones, pdas etc . You can even uninstall it by removing these devices from the device manager to uninstall these drives completely so they can be identified newly. Here is the weird part shutdown i mean pull the plug on computer wait 5 minutes to restart. A cold boot forces computer to reidentify usb ports. Reconnect and see if it works.
Also update your pc motherboard controllers from your pc driver site if w7 doesnt natively identify it.
EDIT follow this link instructions: www.ntcompatible.com/Desperately_need_help_---_USB_Devices_Not_Recognized_t32356.html. Seem to helped others.
Click to expand...
Click to collapse
to make my life easier, now i use sony vaio i5 eseries with win7 64 bit.
so now the only device connected to my laptop is the sgt but still the device no recognized.
i go to device manager, i dont have the yellow exclamation instead i have the erroneous usb which i uninstall and restart try to connect again and still the same
maybe i need to find a new usb cable for sgt.
[email protected] said:
to make my life easier, now i use sony vaio i5 eseries with win7 64 bit.
so now the only device connected to my laptop is the sgt but still the device no recognized.
i go to device manager, i dont have the yellow exclamation instead i have the erroneous usb which i uninstall and restart try to connect again and still the same
maybe i need to find a new usb cable for sgt.
Click to expand...
Click to collapse
Still not giving up on you my friend. Try to put the tab in download mode (power and vol rocker down). Reboot computer and in device manager uninstall it. Disconnect the cable and reconnect it.
I have a final solution for you it involves installing heimdal usb drivers to your computer
Hi to everybody!
I got used i9000M (Canadian) for my daughter (I have LG 3D so not really newbie to Android). It's in factory default state with 2.2 Android.
I tried to update system using Kies but have problem connecting my phone to PC. If I just boot phone up my Win 7 can see it (but not kies). I enable USB debug and Kies says something like "mode is not compatable". Should I untick USB debug and enabler KIES mode under Wireless?
But once I unplug it and plug back I get error 43:
Windows has stopped this device because it has reported problems. (Code 43)
I read and read and read... I'm ready to try odin but I don't know what exact ROM fits my SG... Also lots of stuff is connected to megaupload...
Thanks for any links in advance!
There is an option on Kies to reinstall drivers. I would suggest trying that. But above all, I would advise on rooting the phone and installing a custom ICS rom, like SlimICS. It will add tons of features and make your phone faster while conserving battery life. If you want to transfer files, just plug your phone in, and enable USB Mass Storage mode and you can just drag and drop files like you do with normal flash drives.
Goldenmeadow said:
But once I unplug it and plug back I get error 43: !
Click to expand...
Click to collapse
If you want to fix code 43, you should try http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
IF you want to upgrade it by Odin , the Latest Gingerbread ROMS are here http://forum.xda-developers.com/showthread.php?t=1102881 ,choose the one for your region, all other resources that you may need can also be found at the My Android Collection link below
xsenman said:
If you want to fix code 43, you should try http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thanks for reply! But here is the strange thing :
If I set USB debugging mode on the phone, my PC sees it with no problem and I see two devices in Device Manager under Portable (and they are identified as Samsung ...) But in this mode Kies doesn't connect - I get message like "unable to connect, switch phone to Kies mode ".
But once I turn debugging off, turn Kies mode on and connect the phone, my PC sees only one device and it's in USB group (in Device Manager). And now I get error 43...
So I think it's not the physical connector (otherwise I would not be able to connect at all) but rather old system - 2.2
I'll try to update it with Odin and let you guys know the result.
Sent from my LG-P925g using xda app-developers app
Goldenmeadow said:
Thanks for reply! But here is the strange thing :
If I set USB debugging mode on the phone, my PC sees it with no problem and I see two devices in Device Manager under Portable (and they are identified as Samsung ...) But in this mode Kies doesn't connect - I get message like "unable to connect, switch phone to Kies mode ".
But once I turn debugging off, turn Kies mode on and connect the phone, my PC sees only one device and it's in USB group (in Device Manager). And now I get error 43...
So I think it's not the physical connector (otherwise I would not be able to connect at all) but rather old system - 2.2
I'll try to update it with Odin and let you guys know the result.
Sent from my LG-P925g using xda app-developers app
Click to expand...
Click to collapse
You should instal SAMSUNG USB Drivers for Mobile Phones from here
Also try different usb port or computer. Make sure to kill all Kies processes when you using Odin.
Thanks for help - still no luck
Guys, thanks for help! I really appreciate it!
I installed SlimICS - phone running nice. But my both computers (XP and Win7) give me errors...
Funny part is - Odin works perfectly and I can see my phone in Device Manager with no problem!
Anyway, it's not REALLY big problem, rather inconvenience.
I don't know if it matters, but I also noticed that my AC charger for LG doesn't charge i9000. Weird? Do they have different pinout?
Thanks again.
It's me again
Just for fun connected the phone to old Toshiba laptop at work with win XP, without installing any Samsung drivers and ... And Toshiba recognized phone and showed me two drives - internal and SD!!!
My home computers still giving me grief... Both systems (xp and wib7) stubbornly don't want to install drivers! They put some Microsoft driver from 2007...
I'll keep fighting (installed Kies several times, just drivers - couple versions...)
Sent from my LG-P925g using xda app-developers app
Welcome!
Is there any way to enable usb debug mode without NFC / Paired Samsung phone?
i managed to install gear manager on my sony phoney, i followed a tutorial on installing it on nexus five, this allowed me connect to gear and enable usb debugging.
Hmm
I can't understand what happens. I on usb debug. I flash with odin this: TizenMod-Rom-SM-V700-UCNF1-by-Skin1980-v3.0.tar
Restart. Now working but this is an old tizen os with a new boot logo. adb not see my device. I install all drivers correctly but adb not see in device manager. Just Gear. What's wrong? I see sdb only in device manager.
Tizen use sdb and android use adb? So downgrade to android first? If downgrade with this: http://forum.xda-developers.com/showthread.php?t=2776157 USB Debuging still on? Or i able to access settings?
Cool
Thanks for help.......
Hello all! I have a unlocked Note 9, this is my 2nd one. Both I have wanted to restore back to 8.x from the beta, ODIN, and smart switch are not working. They are recognized, and then when the phone restarts into download mode they basically just sit there, do nothing. I started to think it might be the driver for download mode, not installed right, so it cant find the phone correctly. So can someone confirm this is what you see / should see when the phone is in download mode
SAMSUNG Mobile USB CDC Composite Device
Thank you!
JediSamReye said:
Hello all! I have a unlocked Note 9, this is my 2nd one. Both I have wanted to restore back to 8.x from the beta, ODIN, and smart switch are not working. They are recognized, and then when the phone restarts into download mode they basically just sit there, do nothing. I started to think it might be the driver for download mode, not installed right, so it cant find the phone correctly. So can someone confirm this is what you see / should see when the phone is in download mode
SAMSUNG Mobile USB CDC Composite Device
Thank you!
Click to expand...
Click to collapse
I Havnt played with the note 9 in terms of flashing or rooting as I have the SM-N960W Canadian Snapdragon version and there is no way yet. I've used Odin many times to flash and it can be fussy for a few reasons, I rooted my Galaxy S7 and nexus 5 and a few others. My tips would be....
First Uninstall Samsung driver.
Then Download "usbdeview" on your pc and Uninstall any previous USB connections labeled Android or Samsung or related, as this will allow you to start off as if it's a fresh connection.
Re-Install Samsung USB drivers, then....
Plug in Using stock OEM Samsung Note USB cord and wait for it to connect and drivers to be recognized.
If no luck there try a different USB port. USB 2.0 May work if your using USB 3.0 and it isn't.
Try a different version of odin, there are many, also running odin as administrator may help but not necessarily for sure.
If all this fails try on another computer or laptop. Make sure you only select the proper/necessary options in odin.