Just in case you were hoping that the body of this watch was a solid piece of black metal, it's not. If you bang the edge of bezel it will expose shiny silver metal. I know this because my desk at work is glass and I banged the bezel against it's edge when standing up. Nothing I couldn't improve with a little black magic marker. Sigh, oh well, nothing stays brand new forever.
P.S., Apparently no metal is black through and through. That being said, whatever they have used to "paint" this black is not very good and comes off easily.
mitchellvii said:
Just in case you were hoping that the body of this watch was a solid piece of black metal, it's not.
Click to expand...
Click to collapse
There is no such thing as "black metal" on this planet, yet. That material does not exist and has not been invented yet. Everything that is made out of metal is PAINTED (with different methodologies, but still, painted). No matter how you will create that paint (melted powder, dissolved material, laser) it will only be a thin layer at the surface of the metal. If you will scratch the coloured layer, the METAL under it will be revealed .
So, the hardness of a color on a metal surface it's given by the paint type and the method of applying it.
Yea.. I went to a shop and the promoter showed me a pretty banged up device.. with liver linings all over.
Does anyone know if the silver version is every gonna come out?
Huh gotta say I find this somewhat discouraging. Barely brushed the metal on the bezel of this watch against another hard surface and the paint came right off. Whatever method they used on this didn't work very well. The Zenwatch is suddenly looking more appealing.
Looked around and this seems to be the best repair item I've seen for fixing scratches on black anodized aluminum.
http://www.amazon.com/Birchwood-Casey-Super-Black-Touch/dp/B00BGH0Y0W/ref=cm_cr_pr_product_top
Of course not everyone loves it but most who know what they were doing seem to. Seems to work better than the old Sharpie solution because that dries very flat and you can see it.
This is why I bought a whole case plus screen protector for it.
You might want to consider doing the same.
wtf.now? said:
This is why I bought a whole case plus screen protector for it.
You might want to consider doing the same.
Click to expand...
Click to collapse
Yes but none of those kits protect the edge of the bezel which is the most likely place to get scratched.
mitchellvii said:
Yes but none of those kits protect the edge of the bezel which is the most likely place to get scratched.
Click to expand...
Click to collapse
Nothing will.
Until they make full case covers and that for sure will look like ****.
wtf.now? said:
Nothing will.
Until they make full case covers and that for sure will look like ****.
Click to expand...
Click to collapse
Actually a little adhesive black rubber ring to go right on that bezel edge would to the trick. Sort of a bump guard. That's really the only place you need to protect.
may be that the bezel can be easily changed
I thought that for the price it has to be DLC coated. The ZenWatch should be better, or at least cheaper to replace.
Hi
Do you know if it is possible to change the bezel ?
I banged my watch bezel against a painted wooden door frame today. It took paint off the door frame. But I wiped off the bezel and it was unphased by the event. You'd have to bang the bezel pretty good against something pretty hard to mess it up.
I rubbed mine on a metal surface, at first I saw a nice streak, rubbed it and my watch was fine.
Beware the edge of glass tables. As glass is very hard it will scratch the paint off your bezel with ease. I have a glass top on my office desk. Since I wear the watch on my left wrist, I've put a piece of black rubber electrical tape above where I tend to rest my hand on my leg. Now if I bang the watch on the glass table edge it is protected.
Darnell_Chat_TN said:
I banged my watch bezel against a painted wooden door frame today. It took paint off the door frame. But I wiped off the bezel and it was unphased by the event. You'd have to bang the bezel pretty good against something pretty hard to mess it up.
Click to expand...
Click to collapse
A dumbel during fitness
i was wondering if it could be replaced...
daigoro76 said:
may be that the bezel can be easily changed
Click to expand...
Click to collapse
Can it be replaced? I want to throw a diamond bezel on it.
klyles said:
Can it be replaced? I want to throw a diamond bezel on it.
Click to expand...
Click to collapse
It can't be replaced. But there's a thread in one of these "R" forums. Where someone shows in detail, how to file down the top part and looks nice.
Sent from my Nexus 10 using Tapatalk
Darnell_Chat_TN said:
It can't be replaced. But there's a thread in one of these "R" forums. Where someone shows in detail, how to file down the top part and looks nice.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
What's so hard about taking a file to it? I just took my wife's nail file and filed the entire top ring off. Some dude, filed the entire thing. too.
Darnell_Chat_TN said:
I banged my watch bezel against a painted wooden door frame today. It took paint off the door frame. But I wiped off the bezel and it was unphased by the event. You'd have to bang the bezel pretty good against something pretty hard to mess it up.
Click to expand...
Click to collapse
I too have had some pretty big brushes with objects and the bezel has faired well in every case.
Related
Hi guys,
I've seen the DIY project which is a pretty decent looking alternative but I was wondering if anyone has seen an actual Matte Battery Door yet? It'd be cool to have one like the Epic 4G's which still said Google on the back. (I think the Google looks oddly classy )
My searches have come up kinda empty so thought I'd ask.
Mini rant.... WHY?! WHY???! Is the back cover so prone to scratches.. it been only a week and a half or so and already I've seen scratches developing, in fact another happened just today.. it's really the one and only thing I don't like about it.. not sure what they were thinking..
Well if anybody has seen alternatives please let me know!
Thanks!
There is the Invisible shield Dry which is a matte back protector for it. It looks pretty sleek.
Sent from my Nexus S 4G using XDA App
N00bsploder101 said:
There is the Invisible shield Dry which is a matte back protector for it. It looks pretty sleek.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
URL?
10 chars
Plasti Dip it
you can get the invisibleshield dry from any of the sprint stores-- it's all they carry.
if you get the invisibleshield from ZAGG, they send the "wet" version, which is the cover everyone's used to.
the dry version is matte, and thinner, and doesn't use spray/sponge/liquid. it's not as "tacky" or sticky as the wet version, and you can still clearly see the google/samsung logo.
just be real sure to follow the instructions, squeegee from the center out, and give it a couple of days to fully cure. i saw a bunch of micro bubbles and what look like flaws after applications, and it looked like the dry shield didn't fully seal around the tiny dots on the cover, but after a couple of days it was perfectly sealed in. don't squeegee too hard, especially around the curves. it'll stick, and give it a day or two.
pretty happy with it, and it comes with the regular clear/tacky/sticky front shield, too, which is also applied dry. i found the squeegee to be a bit too stiff, and it's easy to dent and stretch the shield when squeegeeing it out.
ZAGG says to keep the device off, cuz the heat or something will affect curing. i just left mine on after application, and everything is perfect. there's orange peel, but it's minimal. no problems with touch sensitivity, and if anything i think it's better because fingerprints and oil don't show up.
i wonder if it's even worth shielding the front, though. i have an old blackberry that had nothing on it, and the screen i think is plastic, and i treated it like crap. no scratches.
but yeah, just go to a sprint store. they have em. best buy around here only sells the front shield. i prefer the dry matte back because it's thinner, and still does a good job.
fyi: ZAGG's guarantee and return policy are top notch. registering on their site is simple, and they'll ship out a replacement pretty quickly, and you just mail back your old shield as proof. they don't care what condition it's in. before i just ripped off an old shield and slapped it on a piece of paper.
spiicytuna said:
URL?
10 chars
Click to expand...
Click to collapse
Its Phantom Skins that sells it.....
So the Nexus S still doesn't have any third party back covers or battery doors? I can't stand the shiny plastic back. All I see on ebay are oem battery doors that are the same thing. Don't want to use a sticker/shield or dip.
silverwolf0 said:
So the Nexus S still doesn't have any third party back covers or battery doors? I can't stand the shiny plastic back. All I see on ebay are oem battery doors that are the same thing. Don't want to use a sticker/shield or dip.
Click to expand...
Click to collapse
I imagine that is because of the NFC that there aren't any replacement doors.
Backcover
lembowski said:
I imagine that is because of the NFC that there aren't any replacement doors.
Click to expand...
Click to collapse
Correct.
The white version of the Nexus S actually has a very nice textured back on it. I wanted the white color to begin with but after seeing (and feeling) the difference between the backplate on the black version versus the white version, I much prefer the white one. The black one has no grip to it and, like the OP said, it scratches way too easily.
Yeah I thought about the zagg body shield but they unfortunately only had the screen. I decided to grab the wet one instead and I've never had better luck applying a screen protector.. heh the "wetness" really makes it easy to get the bubbles out and it cures awesome.
As for the battery cover.. it's already got a few scratches, but on top of that in the lower left corner it doesn't seem to snap in very securely, even in general use when tapping on the lower left part of the phone you can feel the battery door.. "click" a little bit as if its not latched properly, it makes a audible click sound as well.
I resolved this issue by putting a very thin strip of scotch tape on the inside of the door along the edge which produces just enough pressure to keep the clicking from happening and it feels more secure. (No you can't see it )
SO I'll probably just buy a new battery door eventually and use a body shield.. hopefully the new one will latch a bit more securely as well. It's not a big big deal, and the DIY fix by me is definitely just me nitpicking the tiny click feeling but still.. I think Samsung makes good products most of the time but they really should step up the build quality a little bit.
Thanks for the suggestions though guys
Actually I think I'm going to try the plasti dip on the existing cover to.. I could see that helping the latch as well because it would be just the tiniest bit thicker it would seem.
ranphi said:
The white version of the Nexus S actually has a very nice textured back on it. I wanted the white color to begin with but after seeing (and feeling) the difference between the backplate on the black version versus the white version, I much prefer the white one. The black one has no grip to it and, like the OP said, it scratches way too easily.
Click to expand...
Click to collapse
Is there any black replacement cover with a similar structure available?
im very interested in this too. if there could be a htc style back door id be very happy
ca509 said:
Is there any black replacement cover with a similar structure available?
Click to expand...
Click to collapse
Not that I am aware of, sorry.
I was thinking of getting this phone but i'm a bit worried about the durability.
Or maybe it's too easy to damage. I don't like using cases for phones.
Are phones getting damaged easily?
Phones made of aluminium are more prone to chipping and serious damage than phones made of plastic, yeah, but that's the price we all One users have agreed to pay for the more premium-feel of it.
To be fair, phones aren't really made with being dropped in mind. A sleek, beautiful and premium-feeling like the One means more to me than a durable, ugly, glossy polycarbonate phone that the GS4 is.
Theshawty said:
Phones made of aluminium are more prone to chipping and serious damage than phones made of plastic, yeah, but that's the price we all One users have agreed to pay for the more premium-feel of it.
To be fair, phones aren't really made with being dropped in mind. A sleek, beautiful and premium-feeling like the One means more to me than a durable, ugly, glossy polycarbonate phone that the GS4 is.
Click to expand...
Click to collapse
Thanks. True, I never intend to drop my phones, but unfortunately it can happen. My GSII does feel plasticy, but when I've dropped it, it's survived unmarked. I'm a bit worried about that glass - it shouldn't scratch so easily like in that video.
Scratched? He probably had some sand wherever he was at. Gorilla Glass is rated about 5-6H in hardness. Knifes and regular metal will not scratch it. Copper coins won't as well. Anything harder than those will. A single grain of sand can contain Quartz, which is 7H.
That's what cases, covers and most importantly protective, clear coats like ZAGG's Invisible Shield are made for. It's true that aluminum is more prone to getting chipped or scratched than other materials, but as mentioned above, that's the price you pay for choosing the best quality over the most durable. To be honest with you, I'd rather buy the HTC One and install an invisible shield or nice looking case to protect it than invest in a device with cheap plastic any day. And if you're too paranoid about scratches, grab yourself an Otterbox Defender or such and you'll never have to worry about your device again.
Mine's been naked for a little over a month now and it still looks perfect. It is silver which seems more durable than the black but I've kept in it the same pocket as my keys, coins, zippo, plus whatever weird junk I'm carrying and there isn't a single scratch, dent, hole, or anything.
That said, I am Irish...
BableMan said:
Mine's been naked for a little over a month now and it still looks perfect. It is silver which seems more durable than the black but I've kept in it the same pocket as my keys, coins, zippo, plus whatever weird junk I'm carrying and there isn't a single scratch, dent, hole, or anything.
That said, I am Irish...
Click to expand...
Click to collapse
Is the sliver one bare aluminum? Or does it have a coating of some kind?
SimboXXX said:
Is the sliver one bare aluminum? Or does it have a coating of some kind?
Click to expand...
Click to collapse
Feels like bare anodized aluminum, although I shouldn't have said it was perfect. The white stripes going across the back can get pretty dirty, but that's true of almost all white plastic pieces on phones and is easily fixed with a old toothbrush.
Check this out though if you're worried about scrapes.
http://forums.androidcentral.com/ht...-body-scratch-test-updated-black-version.html
SimboXXX said:
Is the sliver one bare aluminum? Or does it have a coating of some kind?
Click to expand...
Click to collapse
The silver one is purely anodized aluminium, however the black one does have a coating and therefore scratches waaaay more easily.
Oh wow I had no idea the black one has a coating; I sure am glad I made the choice to go with silver!
Guys,any way to clear the white rubber(ornplastic??) stripes around the phone?
Toothbrush and a tiny bit of toothpaste. Make sure it's not wet though.
ArmedandDangerous said:
Toothbrush and a tiny bit of toothpaste. Make sure it's not wet though.
Click to expand...
Click to collapse
Ook :good:
I was asking because, so far my is perfect, but my cover do not cover top and bottom ( side are well covered) because is the semi-rigid crystal clear
Any tip to protect these 2 parts without changing cover?
TarekElsakka said:
Oh wow I had no idea the black one has a coating; I sure am glad I made the choice to go with silver!
Click to expand...
Click to collapse
I think the silver is also anodized aluminum, just with a different color. The difference is that a silver color won't contrast with the aluminum construction if scratched.
i dropped my phone on my concrete driveway while i was cleaning the rims of my car..i was wearing basketball shorts..i was so pissed but it wasn't as bad as i thought it would be
hello00 said:
i dropped my phone on my concrete driveway while i was cleaning the rims of my car..i was wearing basketball shorts..i was so pissed but it wasn't as bad as i thought it would be
Click to expand...
Click to collapse
So you expected it to be 'terrible' or just 'bad'? Photo?
SimboXXX said:
So you expected it to be 'terrible' or just 'bad'? Photo?
Click to expand...
Click to collapse
ehh
http://i42.tinypic.com/35klell.jpg
I'd expect it to be much worse than that. I dropped my Galaxy S3 with flip cover installed on the floor from a very short distance on its side and the LCD broke from the inside and I had to replace the whole digitiser, lcd and of course the frame, not to mention that was inside the house and it fell on ceramic and I am sure asphalt is worse.
Yeah, I think that was pretty lucky.
I just saw this vid of how they test Samsung phones by this machine doing repeated drop tests, impact, and water tests etc. but I think it all depends on the angle and place where the phone hits the surface.
I read that we could use iKlear, the solution as well as the micro-fiber towel in order to clean not only the sides but the whole device (including the screen). I have an unopened iKlear package which I got for my iPad a couple of months ago, so I am going to give it a shot when the sides get a bit dirty and report back.
Hello gyuz,
As mentioned in another thread in Accessories sub-forum, while Installing the Whitestone Dome Screen Protector (https://www.whitestonedome.com/) on my Samsung Galaxy Note 8, there was UV glue spillage all around the phone & now I have dried (UV cured) glue in the tiniest gap between the screen edges and the metal frame of the phone. Please check attached image, I have circled with red the exact location of the glue, however imagine this almost all around the phone:
Now I need a good UV glue remover to soften the dried glue and an extremely thin blade (or a similar tool) to reach in the gap and remove it. I saw some products on ebay, however I am not sure which will do the job.
First of all which Glue Remover is more suitable? Does it have to be a branded one? Or the unbranded ones will do the job as well? Is there danger that the remover will dry and stay in the gap making it worse? Will it damage the color or consistency of the metal frame? Will it damage the buttons (Power, Volum, Bixby)?
Secondly, which tool should do the job reaching such tiny gap while at the same time not scratching the screen or the metal frame? Metal Blade? Plastic Blade? Wire? Some other tool?
Please advise, as I am nearly desperate. Thank you!
Damn, I'm sorry you're having to deal with this. This is one of the biggest reasons why I don't use screen protectors on my phones. I've used a glass one on my Note 5 but didn't like it. Naked display feels the best and performs the best. Not fuss, no glue, no BS. Eeek!
roaduardo said:
Damn, I'm sorry you're having to deal with this. This is one of the biggest reasons why I don't use screen protectors on my phones. I've used a glass one on my Note 5 but didn't like it. Naked display feels the best and performs the best. Not fuss, no glue, no BS. Eeek!
Click to expand...
Click to collapse
Agree with everything. if i had the chance again I would leave it naked, however I would still feel very uncomfortable without protection.. Actual screen exposed to everything is a little risky!
OP, wish I could advise you, but all I can say is take your time and don't rush this task. Since as you aware, you don't want to use a chemical or item that will damage the frame or buttons. Don't use any metal objects.
Feel for you bro, you go ahead with good intentions to protect your device and now in a predicament.
Sent from my SM-N950U using Tapatalk
Limeybastard said:
OP, wish I could advise you, but all I can say is take your time and don't rush this task. Since as you aware, you don't want to use a chemical or item that will damage the frame or buttons. Don't use any metal objects.
Feel for you bro, you go ahead with good intentions to protect your device and now in a predicament.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Thanks for your understanding mate. Indeed tried for the best and ended up worse.
I am not rushing for now, just conctacted Whitestone themselves asking advise on how to fix it, as well as an ebay seller that sells such equipment/tools. He suggested me these:
http://ebay.eu/2g3RySr
http://ebay.eu/2kATYJV
I am not sure about the quality of the Glue Remover and how thin the tools (blades & spudger) are though. Have to make a little research.
That is why also I opened the thread to ask for opinions from people that may have done this or similar task before and to help others in the future.
Warlord1981 said:
Thanks for your understanding mate. Indeed tried for the best and ended up worse.
I am not rushing for now, just conctacted Whitestone themselves asking advise on how to fix it, as well as an ebay seller that sells such equipment/tools. He suggested me these:
http://ebay.eu/2g3RySr
http://ebay.eu/2kATYJV
I am not sure about the quality of the Glue Remover and how thin the tools (blades & spudger) are though. Have to make a little research.
That is why also I opened the thread to ask for opinions from people that may have done this or similar task before and to help others in the future.
Click to expand...
Click to collapse
Before using any chemicals, I would try and use the finest /thinnest plastic card or tool to scrape the glue out of the edges first. Chemicals would be my last resort. Good luck my friend.:good:
roaduardo said:
Damn, I'm sorry you're having to deal with this. This is one of the biggest reasons why I don't use screen protectors on my phones. I've used a glass one on my Note 5 but didn't like it. Naked display feels the best and performs the best. Not fuss, no glue, no BS. Eeek!
Click to expand...
Click to collapse
I have dropped my phones at least 5 times in the last year and each time it landed screen side down. I broke all 5 glass protectors but never the screen. That is why I must have a full adhesive glass protector on. It is a PITA to get perfect but for me, it's worth it.
Mike02z said:
I have dropped my phones at least 5 times in the last year and each time it landed screen side down. I broke all 5 glass protectors but never the screen. That is why I must have a full adhesive glass protector on. It is a PITA to get perfect but for me, it's worth it.
Click to expand...
Click to collapse
I understand, some people need it. I haven't chipped or broken a display since I had an iPhone. Knock wood. Naked is glorious, though.
Plastic tools and alcohol are your friends.
99% Isopropyl should be able to dissolve the glue, and shouldn't leave a mark on the phone (iso evaporates completely and is not dangerous to plastics or metals). A stiff bristled plastic brush would be ideal, maybe an old toothbrush. The thinner and stiffer the bristles, the better.
The iso will dissolve the glue, but you'll need to mechanically agitate it to remove it completely. Bear in mind that traces of iso having touched the glue will streak glass , so a second/third rinse with iso may be necessary.
I'd be careful about getting iso into the switches, as long term iso can degrade rubber (switch seals etc) but as long as you clean, then dry out effectively there shouldn't be an issue (iso will evaporate at room temp in any case). Covering the switches with tape could help, but iso is so thin it will probably go under the tape, and will likely dissolve the glue on the tape too!
e: Whatever you do don't use acetone or any other stronger solvent. Depending on the plastics used acetone will eat right through them, and may affect the finish on other parts too.
Iso really is a decent cleaning solution for most electronic devices.
e ii: Oh, and if you use an old toothbrush, make sure it's very clean. Getting some toothpaste grit on the screen and rubbing it in with a brush would be tragic. Maybe even buy a brand new brush just for this job? Not too expensive for the job, imho.
Limeybastard said:
Before using any chemicals, I would try and use the finest /thinnest plastic card or tool to scrape the glue out of the edges first. Chemicals would be my last resort. Good luck my friend.:good:
Click to expand...
Click to collapse
Yes I'm trying to find such thin tool made of plastic. Cards are too thick for it. It needs to be so thin that can cut you..like razor blades maybe even thinner.
Warlord1981 said:
Yes I'm trying to find such thin tool made of plastic. Cards are too thick for it. It needs to be so thin that can cut you..like razor blades maybe even thinner.
Click to expand...
Click to collapse
Packaging plastic is often thin and stiff... Cut it into a triangle and see if you can get "under" the glue in the gap.
roaduardo said:
I understand, some people need it. I haven't chipped or broken a display since I had an iPhone. Knock wood. Naked is glorious, though.
Click to expand...
Click to collapse
HAHAH, SNAP! Same here, last phone I ever broke was my last iphone I owned , it was the iphone 4s. That was when I was drinking also,
Nekid, is always glorious, without a shadow of a doubt. But I am too shy and need coverage.
iPhone screens can be so brittle. I got used to changing screens for friends at work. During lunch they'd bring me their replacement display kits that they ordered from Ebay and I'd replace their broken screen for some Subway (as payment).
Warlord1981 said:
Yes I'm trying to find such thin tool made of plastic. Cards are too thick for it. It needs to be so thin that can cut you..like razor blades maybe even thinner.
Click to expand...
Click to collapse
Indeed, but not metal.
What i used after installing the whitedome was a sheet of paper, running the corner around gap. Cleaned it easily this way.
princeasi said:
What i used after installing the whitedome was a sheet of paper, running the corner around gap. Cleaned it easily this way.
Click to expand...
Click to collapse
I think OP needs something as thin but stiffer as his glue is cured fully now.
Sent from my SM-N950U using Tapatalk
Limeybastard said:
I think OP needs something as thin but stiffer as his glue is cured fully now.
Click to expand...
Click to collapse
The glue stays soft. If you run the paper around it, it will come up. After about a half a cycle thru, I would cut the edge of the paper each time so that I can continue with a firm edge. I did this after a week of installation.
princeasi said:
The glue stays soft. If you run the paper around it, it will come up. After about a half a cycle thru, I would cut the edge of the paper each time so that I can continue with a firm edge. I did this after a week of installation.
Click to expand...
Click to collapse
Guyz you won't believe it! For the past 2 hours I was doing exactly that! Actually what worked best was a piece of paper that had the dust removal stickers on it (got it from the Olixar Sentinel Case/Screen Protector kit), which is more firm than plain A4 paper. And I was cutting it all the time to keep its sharpness. At some point it finished and I used just plain A4 paper, which wasn't the same but it kinda worked as well..
I was running it inch by inch around the whole frame, taking out glue (indeed soft) little by little! I think it's much better now, though I think I will do another round in the near future.
well after watching videos.. I could see I never needed ALL of that small tube of glue. I always use some kind of screen protector. I like to sell or give away. And you can ALWAYS tell the used phones that never had a screen protector. Always some kind of scratches.. For me selling it mint.. gets more money.
So use some kind of plastic not metal blade to get the excess glue off. It comes off so easily
Warlord1981 said:
First of all which Glue Remover is more suitable? Does it have to be a branded one? Or the unbranded ones will do the job as well? Is there danger that the remover will dry and stay in the gap making it worse? Will it damage the color or consistency of the metal frame? Will it damage the buttons (Power, Volum, Bixby)?
Secondly, which tool should do the job reaching such tiny gap while at the same time not scratching the screen or the metal frame? Metal Blade? Plastic Blade? Wire? Some other tool?
Click to expand...
Click to collapse
I had the same issue with mine and all I used is the film that you remove from the Glass protector before application.. cut off small squares and I ran that in the tiny gaps but making sure you don't go too deep.. Patience and time is must..
I do have a question though.. What is the best thing to use if I wanted to remove my protector off, clean the cured adhesive and use the 2nd bottle to reapply??
Even though the back is glass and there is protection from external case, anyone installed a protector in the back (film, glass, or anything material)
Any brands or suggestions?
thanks a million.
I use this, but I also have a skin, and a case haha so probably a little overkill but I don't want to damage this thing. If I could wrap a pillow around it I would. https://m.aliexpress.com/s/item/32832315490.html?spm=a2g0n.search-cache.0.0.30c0f4f1MpT7WO#autostay
Yeah, me really thinking about getting one for the back as well, prefer glass type.
MACHEK said:
I use this, but I also have a skin, and a case haha so probably a little overkill but I don't want to damage this thing. If I could wrap a pillow around it I would. https://m.aliexpress.com/s/item/32832315490.html?spm=a2g0n.search-cache.0.0.30c0f4f1MpT7WO#autostay
Click to expand...
Click to collapse
For the back, i know that there is lots of film ones. Some sites in other languages sell glass ones but it doesn't look trustworthy and there maybe shipping problems ..
Just trust the robots at dbrand. Best back skins around, look cool also!
Sent from my Galaxy Note8 using XDA Labs
I ordered the slickwraps horror series one, once i get it and apply it ill post pics
Yes Dbrand skin. Dragon skin
mikeyjrd said:
For the back, i know that there is lots of film ones. Some sites in other languages sell glass ones but it doesn't look trustworthy and there maybe shipping problems ..
Click to expand...
Click to collapse
Well you asked and that's where I got mine, and had no issues, just like buying from eBay. I also have a skinomi full skin on it.
I installed a full body skinomi, good for protecting back from dust and sand particles that inevitably will get between the case and the back of the phone, these particles trapped this way cause a lot of damage
winol said:
I installed a full body skinomi, good for protecting back from dust and sand particles that inevitably will get between the case and the back of the phone, these particles trapped this way cause a lot of damage
Click to expand...
Click to collapse
Agreed. Hated the way my note 3 looked after a case. Resale should be much easier with a near perfect phone.
MACHEK said:
Agreed. Hated the way my note 3 looked after a case. Resale should be much easier with a near perfect phone.
Click to expand...
Click to collapse
winol said:
I installed a full body skinomi, good for protecting back from dust and sand particles that inevitably will get between the case and the back of the phone, these particles trapped this way cause a lot of damage
Click to expand...
Click to collapse
Did u get a glass protector in front and fits in your case too?
No, because I have bad experiences in the past with cristal protectors that never fit really well with curved screens
2nd for the dbrand dragon skin. Also adds some friction for holding the phone without adding any thickness
I ordered 2 slickwraps Note 8 naked series for the back. One glossy and one Matte. They are regularly 15.95 each but they have a 50% off sale going now with the code Apocalypse so I bought both for 15 bucks to try them out.
Semantics said:
I ordered 2 slickwraps Note 8 naked series for the back. One glossy and one Matte. They are regularly 15.95 each but they have a 50% off sale going now with the code Apocalypse so I bought both for 15 bucks to try them out.
Click to expand...
Click to collapse
Is the Glossy one completely transparent? The pics on website show a black tint which covers mirror shine. What about the sides and top & bottom?
Don't like the skinomi cuz u have to spray & spray.
mikeyjrd said:
Is the Glossy one completely transparent? The pics on website show a black tint which covers mirror shine. What about the sides and top & bottom?
Don't like the skinomi cuz u have to spray & spray.
Click to expand...
Click to collapse
The glossy is completely transparent. It's a thick plastic, though, and you need a ton of solution to get it on, etc. It only comes with the back pieces, they don't seem to have a kit for the Naked series.
Semantics said:
The glossy is completely transparent. It's a thick plastic, though, and you need a ton of solution to get it on, etc. It only comes with the back pieces, they don't seem to have a kit for the Naked series.
Click to expand...
Click to collapse
"need solution" means you have to add the glue yourself? does it cover all the way to the edges?
I know Rhinoshield makes one, not glass, and it doesn't go all the way to the edges.
mikeyjrd said:
"need solution" means you have to add the glue yourself? does it cover all the way to the edges?
I know Rhinoshield makes one, not glass, and it doesn't go all the way to the edges.
Click to expand...
Click to collapse
It goes all the way to the edges but it's not glue, its just a soap and water mix they give you in a spray bottle.
Semantics said:
It goes all the way to the edges but it's not glue, its just a soap and water mix they give you in a spray bottle.[/QUOTE
Thats the same way you apply the skinomi stuff, but their clear wraps are not transparent. I want the peel & stick type. I'll check in other places to see.
Thanks anyways
Click to expand...
Click to collapse
I got a wet applied screen protector for the back. I want to maintain the look of the back without covering it with a skin. This is the one I have and works perfectly with my Lumion case. (I imagine it would work with any case) https://www.amazon.com/gp/product/B07516Y9B5/ref=crt_ewc_title_gw_2?ie=UTF8&psc=1&smid=AZPYIARPTPBOT
For those without back protectors but use a case, the back will still get scratched easily. On my Galaxy S6 Edge Plus, the glass back had tiny scratches even if I kept the phone in a case all the time. Tiny dust particles still managed to get trapped between the glass back and the case. A back protector is a must if you want to maintain the pristine condition of the back glass.
Slickwraps plus spigen
Bought a slikwraps skin and a spigen clear case.
Slickwraps as usual is a pain in the butt to install and they always take 2+ days to ship the item from the moment you buy them but is till prefer their designs.
Spigen iv'e use them since my s6 and i always liked them, past spigen clear cases turn yellow after some time, i'm hoping this ones won't since it says they have improved the yellowish thing happening.
I wish I hadn't taken off my case to check. I found some very small micro scratches around the bezel. Can only see under bright light at specific angles but knowing they are there really messes with my ocd. I've only had the phone for a few days. I'm sure that any note 8 held under lighting would have the same scratches right? I'm wondering if my case caused them. It's the unicorn beetle pro and it has a hard plastic piece you attach to the front/sides before popping it into the hard rubber/plastic shell. It's very secure. They could have been there as soon as I got. The phone... I didn't inspect the bezel under a direct light like I did today. Doesn't move in it whatsoever... My s7 edge didn't have this issue because the bezels on it aren't shiny like this phone. Is there any possible way to lightly polish them out? They are seriously tiny. Can't feel them with a fingernail or anything. Any idea if the bezel is stainless steel on the orchid gray model or is it just painted plastic? Or should I return it and get a different one... Still in 14 day window.
Nokia 3310 ?
Sent from my Galaxy Note8 using XDA Labs
I have the gray model... nothing here... it don't looks like painted plastic. Also y just use the case which came with the phone.
DeMi-GoD said:
I wish I hadn't taken off my case to check. I found some very small micro scratches around the bezel. Can only see under bright light at specific angles but knowing they are there really messes with my ocd. I've only had the phone for a few days. I'm sure that any note 8 held under lighting would have the same scratches right? I'm wondering if my case caused them. It's the unicorn beetle pro and it has a hard plastic piece you attach to the front/sides before popping it into the hard rubber/plastic shell. It's very secure. They could have been there as soon as I got. The phone... I didn't inspect the bezel under a direct light like I did today. Doesn't move in it whatsoever... My s7 edge didn't have this issue because the bezels on it aren't shiny like this phone. Is there any possible way to lightly polish them out? They are seriously tiny. Can't feel them with a fingernail or anything. Any idea if the bezel is stainless steel on the orchid gray model or is it just painted plastic? Or should I return it and get a different one... Still in 14 day window.
Click to expand...
Click to collapse
That's why I never use a case that has hard inner shell or frame. Sorry to hear about that.
Sent from my SM-N950U using Tapatalk
Which color is more likely to show micro scratches? The shiny silver bezel or the black? I know I read somewhere about the black bezel paint coming off. Also I don't see how the case would of caused this. It doesn't move around in the plastic shell whatsoever once you snap it on. I know I could find the Sam kind of micro scratches on every phone under the right lighting though.
DeMi-GoD said:
Which color is more likely to show micro scratches? The shiny silver bezel or the black? I know I read somewhere about the black bezel paint coming off. Also I don't see how the case would of caused this. It doesn't move around in the plastic shell whatsoever once you snap it on. I know I could find the Sam kind of micro scratches on every phone under the right lighting though.
Click to expand...
Click to collapse
My black one has them too. I bought mine used, but it was only a month old. The previous owner kept in a case and a screen protector from day one.
Well, dust between the back of the phone and the case caused some scratches at the bottom of the back glass. And the bottom of the metal frame has scratches that look like they are from taking the case on and off. I just put a clear protective skin on the back and frame and you cant see the scratches.
The worst is the screen. He used a TGSP with the dot matrix pattern. These notoriously allow dust in under the TGSP. Well one speck of dust in the middle of the screen actually etched a spot into the glass. Its tiny and only visible under bright direct light. But it's there. I switched to a full adhesive TGSP and you cant see it at all.
I'm OCD about my phones too. I wish mine was 100% mint. But on the other hand, I only paid $540 for it (sold my S8+ for $585), and I can relax a little knowing its NOT perfect, if that makes sense.
Mr. Orange 645 said:
My black one has them too. I bought mine used, but it was only a month old. The previous owner kept in a case and a screen protector from day one.
Well, dust between the back of the phone and the case caused some scratches at the bottom of the back glass. And the bottom of the metal frame has scratches that look like they are from taking the case on and off. I just put a clear protective skin on the back and frame and you cant see the scratches.
The worst is the screen. He used a TGSP with the dot matrix pattern. These notoriously allow dust in under the TGSP. Well one speck of dust in the middle of the screen actually etched a spot into the glass. Its tiny and only visible under bright direct light. But it's there. I switched to a full adhesive TGSP and you cant see it at all.
I'm OCD about my phones too. I wish mine was 100% mint. But on the other hand, I only paid $540 for it (sold my S8+ for $585), and I can relax a little knowing its NOT perfect, if that makes sense.
Click to expand...
Click to collapse
Man it's such bs. When I look at it in normal light in my room I see nothing.. Looks perfect... But when I use the camera flash from my s7 edge and shine it I see little lines everywhere along the bezels.... I can't imagine any note 8 without these? On the other hand my s7 edge has none bcuz it isn't a shiny finish like the note 8... Is the black bezel trim shiny like the orchid gray? I'm considering ordering that one.
Wait so you got a skin that goes over the actual Bezels of the phone?
Idk what to do... The bezel looks perfect under normal light... Can't see any lines "scratches" or anything, but when I take a photo of it with flash on, wherever the actual flash hits I can see these lines. Is this normal or what.
DeMi-GoD said:
Idk what to do... The bezel looks perfect under normal light... Can't see any lines "scratches" or anything, but when I take a photo of it with flash on, wherever the actual flash hits I can see these lines. Is this normal or what.
Click to expand...
Click to collapse
If it were me, I wouldn't worry about it. And I'm pretty OCD. But only you will know if you're happy with it or not.
I just don't get how all these micro scratches have appeared. Definitely not the case... They are in areas where the case doesn't even contact the phone. I really want to know if all orchid Grey note 8s will have the same "scratches" under flash. I have a hard time even calling these scratches. And it truly does bug me because I spent a lot of time researching cases etc to maintain a perfect phone.
Send it back ASAP. Your mental well being is far more important than that. LOL
Sent from my SM-N950U using Tapatalk
Someone else told me it was normal and just the brushed aluminum