Database Develop

[Q] Nandroid of 4.4.2 wanted

Long story, but I lost my /system folder on my stock Att xt1058 running 4.4.2.
I have an unlocked bootloader.
Can anyone upload to a Dropbox, or somewhere else, just the system partition so I can restore via nandroid on TWRP? Otherwise I am stuck waiting for the SBF, since I can no longer downgrade.
Thanks
Sent from my Moto X using Tapatalk

Well...
This is untested, but it is a flashable zip that I made from a dump of my ATT 4.4.2 /system. The kernel is included within the zip, but it is not automatically flashed, and you will need to use fastboot to flash it. (I intended this to be used with safestrap..)
165.44.1.ghost_att: http://www.androidfilehost.com/?fid=23329332407581236
Let me know if this flashable zip works. I will post it with the instructions for locked bootloaders...

Will work on this in a few hours.
Just so I am clear, flash zip in recovery, pull boot.img out of the zip, and flash boot.img manually via fastboot. Right?
Sent from my Moto X using Tapatalk

cpetersen2791 said:
Will work on this in a few hours.
Just so I am clear, flash zip in recovery, pull boot.img out of the zip, and flash boot.img manually via fastboot. Right?
Sent from my Moto X using Tapatalk
Click to expand...
Click to collapse
Exactly.

I see it was downloaded 9 times before me. I didn't have any luck with both TWRP and Philz's recovery. Flash stalled on "extracting system files" for 5+ minutes.
I would take the entire TWRP backup if you can upload that.
UPDATE: I deleted the boot.img out of the zip file, and it flashed, then manually flashed boot.img.
UPDATE 2: No radio, nor wifi to connect...Suggestions? I feel i am so close!

Ctrl-Freak said:
Well...
This is untested, but it is a flashable zip that I made from a dump of my ATT 4.4.2 /system. The kernel is included within the zip, but it is not automatically flashed, and you will need to use fastboot to flash it. (I intended this to be used with safestrap..)
165.44.1.ghost_att
Let me know if this flashable zip works. I will post it with the instructions for locked bootloaders...
Click to expand...
Click to collapse
OMG, I think this file will help me to rescue my brick!!!!!
Can I manually flash this firmware on my device using fastboot tool?I have no idea about what safestrap is,please no hate.

It's still a WIP, after flashing, I didn't have radio. Will work on that tomorrow. If we get it going, I'll post something, with Ctrl-Freak's approval.
Sent from my Moto X using Tapatalk

Ctrl-Freak said:
Exactly.
Click to expand...
Click to collapse
I download your zip and find out this is not a firmware...OTZ
I can only wait until the sbf file released.

cpetersen2791 said:
UPDATE 2: No radio, nor wifi to connect...Suggestions? I feel i am so close!
...
It's still a WIP, after flashing, I didn't have radio...
Sent from my Moto X using Tapatalk
Click to expand...
Click to collapse
I can say that the 4.4 modem works fine with 4.4.2. Are you running a 4.4.x modem? If so, you might be experiencing "the radio" problem (One symptom, is that it shows "unknown" in status.)
This radio problem has plagued me in safestrap. No matter what 4.4.x rom I tried to flash, if I was already running 4.4.x, I could not TWRP /system, fastboot boot.img and keep a working radio. I had no idea the problem might persist with an unlocked bootloader's TWRP.
In the past, to fix the radio problem, I always need to downgrade to 4.2.2 (using fastboot->system, boot, modem and recovery.) Then I root, safestrap, load 4.4.x rom using safestrap's TWRP, then fastboot radio and kernel. After that the radio problem disappears.
However... Other people seem to be successful by doing a factory reset in safestrap's TWRP. For instance, look at these instructions: http://forum.xda-developers.com/moto-x/development/rom-krypton-v1-1-4-13-2014-t2716657
Safestrap Version
-If you are already on 4.4.2 then boot into Safestrap and factory reset, do not wipe the system then install to the STOCK slot.
-If your not on 4.4.2 then go here and follow the instructions from my stock rom thread http://rootzwiki.com/topic/116025-ro...52-kitkat-442/ I don't feel like reposting them in here.
Click to expand...
Click to collapse
Previously, I looked at a rom that was intended for the above instructions. That rom basically did the same as mine: It formatted and loaded /system.

Ctrl-Freak said:
I can say that the 4.4 modem works fine with 4.4.2. Are you running a 4.4.x modem? If so, you might be experiencing "the radio" problem (One symptom, is that it shows "unknown" in status.)
This radio problem has plagued me in safestrap. No matter what 4.4.x rom I tried to flash, if I was already running 4.4.x, I could not TWRP /system, fastboot boot.img and keep a working radio. I had no idea the problem might persist with an unlocked bootloader's TWRP.
In the past, to fix the radio problem, I always need to downgrade to 4.2.2 (using fastboot->system, boot, modem and recovery.) Then I root, safestrap, load 4.4.x rom using safestrap's TWRP, then fastboot radio and kernel. After that the radio problem disappears.
However... Other people seem to be successful by doing a factory reset in safestrap's TWRP. For instance, look at these instructions: http://forum.xda-developers.com/moto-x/development/rom-krypton-v1-1-4-13-2014-t2716657
Previously, I looked at a rom that was intended for the above instructions. That rom basically did the same as mine: It formatted and loaded /system.
Click to expand...
Click to collapse
Those are all Verizon Radio's. Do you think I can grab the ATT version 4.4 radio and manually flash? I have that sbf available. Or will the Verizon work in an ATT xt1058

cpetersen2791 said:
Those are all Verizon Radio's. Do you think I can grab the ATT version 4.4 radio and manually flash? I have that sbf available. Or will the Verizon work in an ATT xt1058
Click to expand...
Click to collapse
Sorry. I wasn't telling you to get that rom or the Verizon radio, I was pointing out that a factory reset in TWRP may help with the radio issue.
Long story, but I lost my /system folder on my stock Att xt1058 running 4.4.2.
Click to expand...
Click to collapse
So I am guessing that you took the OTA to originally get to 4.4.2. You should already be running that modem. If that is true, I would not change it.

Ctrl-Freak said:
So I am guessing that you took the OTA to originally get to 4.4.2. You should already be running that modem. If that is true, I would not change it.
Click to expand...
Click to collapse
I factory reset prior to installing, should i wipe /system as well? I am running AOSP roms (PAC) now, and there is no problem with the radio.
I took the OTA, so I dunno what the radio problem would be. Wifi wouldn't turn on either, so i dunno if it's just a radio issue.
i am fortunate to be unlocked bootloader, so i got a copy of the GPE xt1053 posted here as well, and it appears it will work. I think i am gonna try to flash that, then your files w/o a wipe. How does that sound? Unless you got other ideas.

cpetersen2791 said:
I factory reset prior to installing, should i wipe /system as well? I am running AOSP roms (PAC) now, and there is no problem with the radio.
I took the OTA, so I dunno what the radio problem would be. Wifi wouldn't turn on either, so i dunno if it's just a radio issue.
i am fortunate to be unlocked bootloader, so i got a copy of the GPE xt1053 posted here as well, and it appears it will work. I think i am gonna try to flash that, then your files w/o a wipe. How does that sound? Unless you got other ideas.
Click to expand...
Click to collapse
I do not fully understand the radio/wifi issue, so all of my ideas would be trial and error. Give your plan a go and let us know. I would love to know what causes this issue, as a solution should help us using safestrap.

Another thought. Maybe I have to flash the radio, even though I haven't changed. Kind of like flashing the boot.img. I haven't changed that either, but it had to be flashed to boot.
Do you know where I can grab the radio IMG? Can't seem to find it around.
I supposed I can pull it from Att 4.4 sbf. Which files tho, just the Non-hlos.bin file? I don't have the xml here @ the office so I don't know what to look for.
Thanks again for your help
Sent from my Moto X using Tapatalk

Ctrl-Freak said:
I do not fully understand the radio/wifi issue, so all of my ideas would be trial and error. Give your plan a go and let us know. I would love to know what causes this issue, as a solution should help us using safestrap.
Click to expand...
Click to collapse
Found this...
it's OS 4.4 (140.44.5), will that run into the brick issue?

[Q] Rooted 4.4.2, what's next?

First time rooter here but fairly comfortable with tweaking things.
I rooted my new LG G2 (VS980 4G) running 4.4.2 (VS98024A) the other day. I've backed up apps+data with Titanium Backup. It's my understanding that TWRP install is next and then possibly something like CM or Malladus. Is that correct? I want to clear the bloatware and get to a nice, clean, Android OEM or Nexus-like style, if possible.
I was hoping y'all might be able to point me in the right direction.

jsnrch003 said:
First time rooter here but fairly comfortable with tweaking things.
I rooted my new LG G2 (VS980 4G) running 4.4.2 (VS98024A) the other day. I've backed up apps+data with Titanium Backup. It's my understanding that TWRP install is next and then possibly something like CM or Malladus. Is that correct? I want to clear the bloatware and get to a nice, clean, Android OEM or Nexus-like style, if possible.
I was hoping y'all might be able to point me in the right direction.
Click to expand...
Click to collapse
You have a couple of choices. Debloat the stock rom, install a debloated/customized stock style rom (Malladus, etc or go with an AOSP based rom (CM11 based on 4.4.2 OTA, Beanstalk, Carbon, etc.), just keep in mind since you're at 24A, you need to use something like Autorec to install TWRP and if you want an AOSP rom, you need one based on 24A/4.4.2 source.

mjones73 said:
You have a couple of choices. Debloat the stock rom, install a debloated/customized stock style rom (Malladus, etc or go with an AOSP based rom (CM11 based on 4.4.2 OTA, Beanstalk, Carbon, etc.), just keep in mind since you're at 24A, you need to use something like Autorec to install TWRP and if you want an AOSP rom, you need one based on 24A/4.4.2 source.
Click to expand...
Click to collapse
Is twrp the only option with the 24A phones? Just got my perfectly rooted and customized phone replaced under warranty and now the loki method isn't working.

HellaBester said:
Is twrp the only option with the 24A phones? Just got my perfectly rooted and customized phone replaced under warranty and now the loki method isn't working.
Click to expand...
Click to collapse
You have to downgrade your aboot to install a recovery, LG patched the exploit in 24A. I believe you can flash CWM afterwards, I just know AutoRec does all the back end patching and stuff then flashes TWRP automatically.

mjones73 said:
You have to downgrade your aboot to install a recovery, LG patched the exploit in 24A. I believe you can flash CWM afterwards, I just know AutoRec does all the back end patching and stuff then flashes TWRP automatically.
Click to expand...
Click to collapse
link to this autorec your refering too

life said:
link to this autorec your refering too
Click to expand...
Click to collapse
It's in the LG G2 Dev section, I don't have the link handy, a search would turn it up.

mjones73 said:
It's in the LG G2 Dev section, I don't have the link handy, a search would turn it up.
Click to expand...
Click to collapse
thank you, i was at work and for some reason i thought it would be on the playstore, which my searching only brought up call recorders... lol
but then it hit me search xda for it and bam found it... only 5 minutes later too... lol sorry but thank you for your input helping the other guy, it has helped me as well

[Q] No Audio Mahdi 6/28

Hi, sorry if this is in the wrong place, XDA won't let me post to the mahdi thread because I'm new.
I clean flashed the 6/28 Mahdi Rom for my Vs980 and audio didn't work whatsoever. Everything else was fine. Here are a couple of examples of what I mean:
Poweramp play button will be clickable but will return an error and revert to the play button
Youtube will constantly prepare to play (load, attemp to play then continue to load again)
Placing phone calls results in a black screen, then call ended screen 20 seconds later
Receiving phone calls don't show up, rings once (on the phone placing the call not my vs980) then goes to voicemail
Volume up and down doesn't give tones.
Apollo player gives "DSP manager crashed" errors
I tried freezing DSP manager, but that didn't work.
I should also mention I didn't restore using titanium, I tried reflashing 3 or 4 times, and I used the PA 4.4.4 gapps.
I can't find anyone else with this issue, hopefully someone knows what's up.
Thanks for helping if you respond!

Have you tried a different rom? One specifically for our service. I know Mahdi is compatible, but just to see.
Sent from my VS980 4G using XDA Premium 4 mobile app

[removed reply, see below]

njstein said:
Have you tried a different rom? One specifically for our service. I know Mahdi is compatible, but just to see.
Click to expand...
Click to collapse
Yes I have, I'm currently running a 4.4.2 build of Mahdi that works fine (2.4-g2-20140211). It's just the 6/25 and 6/28 that have the audio issues for me.

Nextcue said:
Yes I have, I'm currently running a 4.4.2 build of Mahdi that works fine (2.4-g2-20140211). It's just the 6/25 and 6/28 that have the audio issues for me.
Click to expand...
Click to collapse
Huh, that's weird. You probably can't post in that for trouble shooting, so have you tried a different gapps? Maybe PA is doing something? Banks gapps is an excellent package (just keep the convo going so you can hit 10 posts).
Here's a link to Banks:
http://forum.xda-developers.com/showthread.php?t=2012857
Sent from my VS980 4G using XDA Premium 4 mobile app

njstein said:
Huh, that's weird. You probably can't post in that for trouble shooting, so have you tried a different gapps? Maybe PA is doing something? Banks gapps is an excellent package (just keep the convo going so you can hit 10 posts).
Click to expand...
Click to collapse
Hmm, I'll check that out when I get a chance. Thanks so much for replying

Nextcue said:
Hmm, I'll check that out when I get a chance. Thanks so much for replying
Click to expand...
Click to collapse
I guess you are on the stock unmodded Kit Kat modem right?

JRJ442 said:
I guess you are on the stock unmodded Kit Kat modem right?
Click to expand...
Click to collapse
Maybe, how would I find out? When I first rooted I flashed Mahdi over 24a I think.

Nextcue said:
Maybe, how would I find out? When I first rooted I flashed Mahdi over 24a I think.
Click to expand...
Click to collapse
How did you get to 24A? If it was from an OTA its the stock modem. Post a picture of your baseband if you can

JRJ442 said:
How did you get to 24A? If it was from an OTA its the stock modem.
Click to expand...
Click to collapse
It was the OTA, so yes it is the stock modem.

Nextcue said:
It was the OTA, so yes it is the stock modem.
Click to expand...
Click to collapse
The current build you're on where everything works shouldn't even boot if you're on 24A. As old as that build is(2.4), its still using the JB kernel, requiring the 12b radio. I think you should go to the Malladus thread, download his baseband updater, and the ROM. And flash that. It should straighten out whatever happened. Some sound drivers are tied in with the modem/baseband for some reason on KK. That's what makes me think something with the baseband is messed up. I think I have the Malladus stuff in my Dropbox if you want links. After you get a good GPS lock in maps with Malladus. Then flash the newest build of Mahdi, not the 2.4 build you're running.

JRJ442 said:
The current build you're on where everything works shouldn't even boot if you're on 24A. As old as that build is(2.4), its still using the JB kernel, requiring the 12b radio. I think you should go to the Malladus thread, download his baseband updater, and the ROM. And flash that. It should straighten out whatever happened. Some sound drivers are tied in with the modem/baseband for some reason on KK. That's what makes me think something with the baseband is messed up. I think I have the Malladus stuff in my Dropbox if you want links. After you get a good GPS lock in maps with Malladus. Then flash the newest build of Mahdi, not the 2.4 build you're running.
Click to expand...
Click to collapse
Thank you so much, links would be very appreciated.

JRJ442 said:
The current build you're on where everything works shouldn't even boot if you're on 24A. As old as that build is(2.4), its still using the JB kernel, requiring the 12b radio.
Click to expand...
Click to collapse
Also I just checked, definitely still on the 12b radio.

Nextcue said:
Thank you so much, links would be very appreciated.
Click to expand...
Click to collapse
First question, are you using TWRP? The wipe instructions below are for TWRP
Here's the ROM https://copy.com/PDixihCzNxqLSBp
Here's the baseband updater https://copy.com/mVY1Qi2cVg3EgXS and the md5 is 941f657383ab5a6ddc8c6f4c0ee4183c make sure t matches before you flash.
Reboot to recovery and flash the baseband updater. Then hit the back button. Select wipe -> advanced wipe. Select dalvik, cache, system, data. Be absolutely sure you don't select internal. Flash Malladus and whatever gapps you prefer.

JRJ442 said:
First question, are you using TWRP? The wipe instructions below are for TWRP
Reboot to recovery and flash the baseband updater. Then hit the back button. Select wipe -> advanced wipe. Select dalvik, cache, system, data. Be absolutely sure you don't select internal. Flash Malladus and whatever gapps you prefer.
Click to expand...
Click to collapse
I am using TWRP. So after I follow your steps, go into the malladus rom and check the gps, then do I flash the latest Mahdi?

Nextcue said:
I am using TWRP. So after I follow your steps, go into the malladus rom and check the gps, then do I flash the latest Mahdi?
Click to expand...
Click to collapse
Yes, actually download maps and ensure it get a GPS lock on you. Then reboot to recovery, go to advanced wipe and select dalvik, cache, system, and data. Then flash the newest mahdi and the newest patch. The ROM is 6-28 and the patch is V6 I believe. Then gapps. You should be good to go then.

JRJ442 said:
Yes, actually download maps and ensure it get a GPS lock on you. Then reboot to recovery, go to advanced wipe and select dalvik, cache, system, and data. Then flash the newest mahdi and the newest patch. The ROM is 6-28 and the patch is V6 I believe. Then gapps. You should be good to go then.
Click to expand...
Click to collapse
Thank you so much, really, I appreciate all of your help!

Nextcue said:
Thank you so much, really, I appreciate all of your help!
Click to expand...
Click to collapse
No problem. Report back too please. And definitely make sure the md5 matches on your download for that baseband updater. That's super important

JRJ442 said:
No problem. Report back too please. And definitely make sure the md5 matches on your download for that baseband updater. That's super important
Click to expand...
Click to collapse
Will absolutely report back. I will be testing it later tonight.Just in case though: What do I do in the event I do not get a gps lock on maps?

Nextcue said:
Will absolutely report back. I will be testing it later tonight.Just in case though: What do I do in the event I do not get a gps lock on maps?
Click to expand...
Click to collapse
You'll get one. No need to worry about not getting one. You just have to do it because sometimes coming from 12B JB source, the sensors won't calibrate correctly on a ROM with true KK source. But I'm not really sure what you could do if you don't to be honest. You should get a lock fairly quick though. Just make sure location is on high accuracy and it will lock

[Q] Jactivelteatt

-=- I'm sorry if someone already asked this, the search box kept disappearing on me when browsing on my device. -=-
I've been looking around for Custom Roms for the SGH-I537, and I always seem to find them. But when I go and attempt to install them through SafeStrap Recovery, it says its for everything but the JACTIVELTEATT, is there a custom ROM somewhere specifically made for this device?

JoshCiares said:
-=- I'm sorry if someone already asked this, the search box kept disappearing on me when browsing on my device. -=-
I've been looking around for Custom Roms for the SGH-I537, and I always seem to find them. But when I go and attempt to install them through SafeStrap Recovery, it says its for everything but the JACTIVELTEATT, is there a custom ROM somewhere specifically made for this device?
Click to expand...
Click to collapse
There are not any ROMs created specifically for the i537. However you can install TouchWiz-based ROMs built for the regular S4 and just flash the Masterpatch afterwards.

Devo7v said:
There are not any ROMs created specifically for the i537. However you can install TouchWiz-based ROMs built for the regular S4 and just flash the Masterpatch afterwards.
Click to expand...
Click to collapse
I've tried doing that, after flashing the masterpatch and so on, I boot the phone with that Rom-Slot active, and it looks JUST like my stock rom with the same data and everything. Just I can not use the Wi-Fi or data.

JoshCiares said:
I've tried doing that, after flashing the masterpatch and so on, I boot the phone with that Rom-Slot active, and it looks JUST like my stock rom with the same data and everything. Just I can not use the Wi-Fi or data.
Click to expand...
Click to collapse
You're doing something wrong because ROM slots cannot share data, so you are just booting your stock ROM. Are you sure you're using the correct version of SafeStrap for your firmware?

Devo7v said:
You're doing something wrong because ROM slots cannot share data, so you are just booting your stock ROM. Are you sure you're using the correct version of SafeStrap for your firmware?
Click to expand...
Click to collapse
Yes, I've been able to install some different zip files, and even successfully use backups I've made from it. I haven't found anything else that hasn't work on it.
Do you think you could send me links to everything needed to be downloaded? Just so I can make sure I did it right? I remembering installing the masterpatch m3 and camera fix

JoshCiares said:
Yes, I've been able to install some different zip files, and even successfully use backups I've made from it. I haven't found anything else that hasn't work on it.
Do you think you could send me links to everything needed to be downloaded? Just so I can make sure I did it right? I remembering installing the masterpatch m3 and camera fix
Click to expand...
Click to collapse
What firmware are you on? And what version of SafeStrap are you using?

Android KitKat, 4.4.2
SafeStrap, 3.73

JoshCiares said:
Android KitKat, 4.4.2
SafeStrap, 3.73
Click to expand...
Click to collapse
This one?
http://forum.xda-developers.com/showthread.php?p=56119330

Devo7v said:
This one?
http://forum.xda-developers.com/showthread.php?p=56119330
Click to expand...
Click to collapse
Yes, and that's the exact page I got it from.

JoshCiares said:
Yes, and that's the exact page I got it from.
Click to expand...
Click to collapse
So you reboot to SafeStrap, create a Rom slot with enough space for your ROM, flash your ROM, flash the Masterpatch, and reboot and it boots up your stock ROM?

Devo7v said:
So you reboot to SafeStrap, create a Rom slot with enough space for your ROM, flash your ROM, flash the Masterpatch, and reboot and it boots up your stock ROM?
Click to expand...
Click to collapse
Stock ROM, with all my data, but my Network AT&T is not accessible. Both, data and to call. I tried entering the VPN for it manually and it didn't work. Everything also loads extremely slowly. My ram gets cut in half. And a whole bunch of other minor stuff.
I've tested this with multiple Roms.

JoshCiares said:
Stock ROM, with all my data, but my Network AT&T is not accessible. Both, data and to call. I tried entering the VPN for it manually and it didn't work. Everything also loads extremely slowly. My ram gets cut in half. And a whole bunch of other minor stuff.
I've tested this with multiple Roms.
Click to expand...
Click to collapse
Reflash your stock ROM and start over. You did something wrong somewhere and it crippled your stock ROM.

Devo7v said:
Reflash your stock ROM and start over. You did something wrong somewhere and it crippled your stock ROM.
Click to expand...
Click to collapse
Okay. Thanks for your help. I won't be able to reflash my ROM, my laptop is broken, but hopefully things turn out good.

[MOD] Freedom Bumped TWRP One Click 26A & 27A

Here's a one click method to unlock 26A & 27A with a bumped TWRP recovery.
Special thanks to Team Codefire for bump and WACOMalt for TWRP.
Before you can flash any rom after this, the boot.img must be bumped first on any rom you want to use. As time passes, you'll probably see all the ROM's bumped. If the rom you want to use is not BUMPED, don't use this.
-----------------------------------------------------------------
WARNING: IF THE BOOT IMAGE IS NOT BUMPED ON 27A BY THE DEV OR YOU ON THE ROM YOU WANT TO FLASH, THEN YOU WILL NOT BOOT.
To bump your boot.img, go here:
http://forum.xda-developers.com/lg-g3/general/bump-window-version-t2956829
-----------------------------------------------------------------
Here's the one click Freedom Bump TWRP. Must be rooted on 26a or 27a with stump root and dev usb debugging enabled. For stump root click here: STUMP
FREEDOM 26A BUMPED TWRP RECOVERY <----------------------------------------------------
https://www.androidfilehost.com/?fid=95784891001611553
MD5: 7653af8593d1b4540b6a0ec2fc02abd6
------------------------------------------------------------------------------------
Here's a zip template you can use to flash your bumped boot.img and kernels. Drop them in the right spot.
DOWNLOAD:
BUMPED BOOT.IMG TEMPLATE
https://www.androidfilehost.com/?fid=95784891001611632

RESERVED..

How does one go about installing this on our G2's if we already used autorec

kbuck13 said:
How does one go about installing this on our G2's if we already used autorec
Click to expand...
Click to collapse
U don't need it till a rom has a bumped boot.img. This is a new method to unlock so not sure how much it will catch on. If u have a G3 its the only method to unlock.

@MicroMod777 is this thermally controlled like drgravy and dr87 twrp?

Just sucks stump doesn't work for me

Mightycaptain said:
@MicroMod777 is this thermally controlled like drgravy and dr87 twrp?
Click to expand...
Click to collapse
All I did was bump twrp. Not sure.
pepz187 said:
Just sucks stump doesn't work for me
Click to expand...
Click to collapse
Did u run it for like 10 minutes?

Keeps running until eventually it says device unsupported

Nice to finally be on the full 26a bootstack with twrp.

By the sound of it after this you'll wanna flash your chosen thermally governed twrp, assuming you can update to a non bumped twrp. Is that possible micro, or will flashing different twrp break it?

pepz187 said:
Keeps running until eventually it says device unsupported
Click to expand...
Click to collapse
Odd. Reboot try again.
TheUnladenSwallow said:
By the sound of it after this you'll wanna flash your chosen thermally governed twrp, assuming you can update to a non bumped twrp. Is that possible micro, or will flashing different twrp break it?
Click to expand...
Click to collapse
Not sure. Older twrp's didnt work or philz recovery.

Hello, MicroMod777!
1. I would know, on 26A, will will remain original?
EDIT
2. can I also push back original recovery?

HTCZ715E said:
Hello, MicroMod777!
I would know, on 26A kernel will remain original?
Click to expand...
Click to collapse
Yes. This only changes recovery.img.

Looks like BUMP project got closed as it was hacked. Do not use this till bumping a boot.img is made possible again. Used Freedom 24a instead.

MicroMod777 said:
Looks like BUMP project got closed as it was hacked. Do not use this till bumping a boot.img is made possible again. Used Freedom 24a instead.
Click to expand...
Click to collapse
I installed it & everything is OK.
Do you mean, it is dangerous, because it came from un-trusted source?

HTCZ715E said:
I installed it & everything is OK.
Do you mean, it is dangerous, because it came from un-trusted source?
Click to expand...
Click to collapse
No. It just means the website to bump boot images is closed.
Read info here:
http://apps.codefi.re/bump/