Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you !
Every has his experience and a way to do it, so this is mine
First I searched everywhere, as you already did, the technique is globally the same but one important thing was missing and I had to get my Razri ON, it's an "Intel" !
I tried this app to install the needed drivers and to flash firmware, and I tried also this
Just let me explain what i had before the "softbrick" just to assure you that your Razri is not dead and it's up to you to bring it up from the dead and you can do that
I softbricked it by rooting my JB android with ICS, I messed up, in you case might be different but you are here cause we all had the same problem
Well, if your Razri Motorola XT890 cannot boot (or keeps rebooting with no end), charging the battery is [im]possible. Below is a quick how-to
RSD Lite detects the Razri as a "MEDFIELD" device. You can use RSD Lite to flash your phone whith a new Android Image [JB here, for "JB 4.1.2" I choose "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"] but this is doable only after getting to the fastboot menu
1. Install EXE drivers for the "MEDFIELD" device
2. Run BAT file and follow the instructions inside
3. You might restart you Razri
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version)
Just to say, for everyone who has this trouble, and thinks that his Razri is dead, good new It is not, but remember that to make this work that fastboot menu is in there, somewhere just use the right combination, no matter what you have on the screen (Bootloader Unlocked screen or nothing at all just a black screen)
This is a little How-To:
Power botton+Volume Down botton at the same time
Wait until the screen flashes or the green led light to flash the immediately release the Power button while keeping the Volume down pushed (do not release ever) until the fastboot menu appears
Good Luck
service required code corrupt
DoxyMarket said:
Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you !
Every has his experience and a way to do it, so this is mine
First I searched everywhere, as you already did, the technique is globally the same but one important thing was missing and I had to get my Razri ON, it's an "Intel" !
I tried this app to install the needed drivers and to flash firmware, and I tried also this
Just let me explain what i had before the "softbrick" just to assure you that your Razri is not dead and it's up to you to bring it up from the dead and you can do that
I softbricked it by rooting my JB android with ICS, I messed up, in you case might be different but you are here cause we all had the same problem
Well, if your Razri Motorola XT890 cannot boot (or keeps rebooting with no end), charging the battery is [im]possible. Below is a quick how-to
RSD Lite detects the Razri as a "MEDFIELD" device. You can use RSD Lite to flash your phone whith a new Android Image [JB here, for "JB 4.1.2" I choose "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"] but this is doable only after getting to the fastboot menu
1. Install EXE drivers for the "MEDFIELD" device
2. Run BAT file and follow the instructions inside
3. You might restart you Razri
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version)
Just to say, for everyone who has this trouble, and thinks that his Razri is dead, good new It is not, but remember that to make this work that fastboot menu is in there, somewhere just use the right combination, no matter what you have on the screen (Bootloader Unlocked screen or nothing at all just a black screen)
This is a little How-To:
Power botton+Volume Down botton at the same time
Wait until the screen flashes or the green led light to flash the immediately release the Power button while keeping the Volume down pushed (do not release ever) until the fastboot menu appears
Good Luck
Click to expand...
Click to collapse
hello good afternoon,
Could you tell me if it corrects this type of unbrick?
service required code corrupt. appears on the black screen.
already thanks.
DoxyMarket said:
Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you !
Every has his experience and a way to do it, so this is mine
First I searched everywhere, as you already did, the technique is globally the same but one important thing was missing and I had to get my Razri ON, it's an "Intel" !
I tried this app to install the needed drivers and to flash firmware, and I tried also this
Just let me explain what i had before the "softbrick" just to assure you that your Razri is not dead and it's up to you to bring it up from the dead and you can do that
I softbricked it by rooting my JB android with ICS, I messed up, in you case might be different but you are here cause we all had the same problem
Well, if your Razri Motorola XT890 cannot boot (or keeps rebooting with no end), charging the battery is [im]possible. Below is a quick how-to
RSD Lite detects the Razri as a "MEDFIELD" device. You can use RSD Lite to flash your phone whith a new Android Image [JB here, for "JB 4.1.2" I choose "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"] but this is doable only after getting to the fastboot menu
1. Install EXE drivers for the "MEDFIELD" device
2. Run BAT file and follow the instructions inside
3. You might restart you Razri
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version)
Just to say, for everyone who has this trouble, and thinks that his Razri is dead, good new It is not, but remember that to make this work that fastboot menu is in there, somewhere just use the right combination, no matter what you have on the screen (Bootloader Unlocked screen or nothing at all just a black screen)
This is a little How-To:
Power botton+Volume Down botton at the same time
Wait until the screen flashes or the green led light to flash the immediately release the Power button while keeping the Volume down pushed (do not release ever) until the fastboot menu appears
Good Luck
Click to expand...
Click to collapse
Hi
do you have any solution for "service required code corrupt" plz
thanx
If you've tried to root your JB Motorola RAZR I with the ICS root-method don't worry. The ICS-root-method flash a unsave boot image, which is for the ICS firmware. That's why the RAZR with JB have problems to boot.
To make everything working again, you need:
- RAZR I PC driver
- fastboot (PC program)
- the right boot image for your JB version. (e.g. retail.EU) (download the right version from firmware-thread and search for a file "boot.img" )
If you have everything prepared do the following things:
- start your RAZR I (make sure, that it doesn't boot into bootloop)
- connect your RAZR I to your PC
- on PC start a command line/terminal and (for windows users) navigate in the directory with the fastboot.exe and make sure that the boot.img file is in the same directory
(Linux users navigate into the directory with the boot.img)
- type: fastboot flash boot boot.img
- wait until it's done
- reboot the device by typing: fastboot reboot
And that's it. Your personal data won't be touched, everything is like it was before.
Gesendet von meinem XT890 mit Tapatalk 4
Try this
sysmanin said:
Hi
do you have any solution for "service required code corrupt" plz
thanx
Click to expand...
Click to collapse
It's probably beacause tou updated your Formware with the wrong version, try this out:
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version) ==> You can get it from de XML file form sbf.droid-developers.org/smi/list.php it depends in which android version you were befor, in my case i took "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"
So you have to Unzip it and there you'll find the ifwi & dnx files
Nice
cupioscire said:
If you've tried to root your JB Motorola RAZR I with the ICS root-method don't worry. The ICS-root-method flash a unsave boot image, which is for the ICS firmware. That's why the RAZR with JB have problems to boot.
To make everything working again, you need:
- RAZR I PC driver
- fastboot (PC program)
- the right boot image for your JB version. (e.g. retail.EU) (download the right version from firmware-thread and search for a file "boot.img" )
If you have everything prepared do the following things:
- start your RAZR I (make sure, that it doesn't boot into bootloop)
- connect your RAZR I to your PC
- on PC start a command line/terminal and (for windows users) navigate in the directory with the fastboot.exe and make sure that the boot.img file is in the same directory
(Linux users navigate into the directory with the boot.img)
- type: fastboot flash boot boot.img
- wait until it's done
- reboot the device by typing: fastboot reboot
And that's it. Your personal data won't be touched, everything is like it was before.
Gesendet von meinem XT890 mit Tapatalk 4
Click to expand...
Click to collapse
Worth testing. Very useful for people having the issue
Hello everyone,my phone had bricked;
I was on jelly bean 4.1.2 , Systemversion : 91.2.26001.XT890.Retail.en.EU ( Firmwareupgrade)
my question is ,using this method wich ifwi & dnx file could i choose ?
Thanks in advance
DoxyMarket said:
Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you !
Every has his experience and a way to do it, so this is mine
First I searched everywhere, as you already did, the technique is globally the same but one important thing was missing and I had to get my Razri ON, it's an "Intel" !
I tried this app to install the needed drivers and to flash firmware, and I tried also this
Just let me explain what i had before the "softbrick" just to assure you that your Razri is not dead and it's up to you to bring it up from the dead and you can do that
I softbricked it by rooting my JB android with ICS, I messed up, in you case might be different but you are here cause we all had the same problem
Well, if your Razri Motorola XT890 cannot boot (or keeps rebooting with no end), charging the battery is [im]possible. Below is a quick how-to
RSD Lite detects the Razri as a "MEDFIELD" device. You can use RSD Lite to flash your phone whith a new Android Image [JB here, for "JB 4.1.2" I choose "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"] but this is doable only after getting to the fastboot menu
1. Install EXE drivers for the "MEDFIELD" device
2. Run BAT file and follow the instructions inside
3. You might restart you Razri
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version)
Just to say, for everyone who has this trouble, and thinks that his Razri is dead, good new It is not, but remember that to make this work that fastboot menu is in there, somewhere just use the right combination, no matter what you have on the screen (Bootloader Unlocked screen or nothing at all just a black screen)
This is a little How-To:
Power botton+Volume Down botton at the same time
Wait until the screen flashes or the green led light to flash the immediately release the Power button while keeping the Volume down pushed (do not release ever) until the fastboot menu appears
Good Luck
Click to expand...
Click to collapse
Hi! i have a chance to revive my razr i?
HI guys! I have a problem.
i have downgraded with this rom:http://forum.xda-developers.com/showthread.php?t=2294653
and after i tried to flash two rom with rsd lite:
CFC_signed_customer_8.7.1I-110_IFW-31_RTGB.xml
CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1F F_fb.xml
now the phone is locked , in the screen is write: service required code corrupt
and the green led .. can help me please?
It will work!!... keep trying
peter971215 said:
Hi! i have a chance to revive my razr i?
HI guys! I have a problem.
i have downgraded with this rom:http://forum.xda-developers.com/showthread.php?t=2294653
and after i tried to flash two rom with rsd lite:
CFC_signed_customer_8.7.1I-110_IFW-31_RTGB.xml
CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1F F_fb.xml
now the phone is locked , in the screen is write: service required code corrupt
and the green led .. can help me please?
Click to expand...
Click to collapse
Check this for your problem http://forum.xda-developers.com/showthread.php?t=2134391
You must use the boot.img for you Android version (boot.img isn't the same for ICS, JB or GB)
DoxyMarket said:
Check this for your problem http://forum.xda-developers.com/showthread.php?t=2134391
You must use the boot.img for you Android version (boot.img isn't the same for ICS, JB or GB)
Click to expand...
Click to collapse
i can't get fastboot, the phone go on "service required code corrupt" screen with the green led on and nothing..
Try again
peter971215 said:
i can't get fastboot, the phone go on "service required code corrupt" screen with the green led on and nothing..
Click to expand...
Click to collapse
This would help http://forum.xda-developers.com/showthread.php?t=2220242
DoxyMarket said:
This would help http://forum.xda-developers.com/showthread.php?t=2220242
Click to expand...
Click to collapse
Nothing... the phone show Only the green led and nothing.....
Again
peter971215 said:
Nothing... the phone show Only the green led and nothing.....
Click to expand...
Click to collapse
Charge the phone
And try to get to Fastboot menu
help
Hello!
Pozhausta tell where to get the files (ifwi and dnx) of this firmware (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1F F) and then archive them in there?
You simply saved my life!
I did the whole process, but now i'm stuck on (flash boot "boot_signed") in RSD, any ideas?
renatotec said:
I did the whole process, but now i'm stuck on (flash boot "boot_signed") in RSD, any ideas?
Click to expand...
Click to collapse
You probably did not use the right image for you phone
peter971215 said:
Nothing... the phone show Only the green led and nothing.....
Click to expand...
Click to collapse
Have you already found a solution mate ?
GRACIAS!!!
Instalé una ROM brasilera porque se había brickeado, era JB, luego instalé la ICS y quedo muerto, encontre tu post primero y funcionó perfecto, mil gracias!!!!
Motorola XT890 Razr i
Hi, I tried to follow your instructions but so far my cell phone is still death. when I run the bat file I got this error message. libusB0.dll not found. also I don't know how RDS lite tools detects my cel. it is not working as the same manner as you showed us. can you help me to find a way to unbrick my cell phone.
thanks
Hello guys!
As you can read in the title i have a problem with my phone being stuck at the LG bootscreen with a little text in the top right hand corner saying "Now Ready!". On the PC fastboot recognizes the device (fastboot devices), but when I try to flash anything on it (boot/recovery) it says, that the bootloader is locked. The bootloader of my phone is definitely not locked, otherwise I could not have flashed CWM Touch Recovery and custom ROMs.
Before this happened (in this order)
- I had Paranoid Android 3.99 Android 4.3 for p880 installed
- I wanted to try and install MultiRom v12 for p880
- I made a complete backup of all data (so data is not my problem)
- I wiped EVERYTHING (system,boot,recovery) using "fastboot erase [partition]"
I can't even get to the S/W Upgrade screen to reset the firmware to v20B anymore. Recovery is also gone and I can't flash a new one.
Oh, and by the way: ADB doesn't recognize my phone either so I can't do "adb shell".
Help is very appreciated!
TheZuirk said:
Hello guys!
As you can read in the title i have a problem with my phone being stuck at the LG bootscreen with a little text in the top right hand corner saying "Now Ready!". On the PC fastboot recognizes the device (fastboot devices), but when I try to flash anything on it (boot/recovery) it says, that the bootloader is locked. The bootloader of my phone is definitely not locked, otherwise I could not have flashed CWM Touch Recovery and custom ROMs.
Before this happened (in this order)
- I had Paranoid Android 3.99 Android 4.3 for p880 installed
- I wanted to try and install MultiRom v12 for p880
- I made a complete backup of all data (so data is not my problem)
- I wiped EVERYTHING (system,boot,recovery) using "fastboot erase [partition]"
I can't even get to the S/W Upgrade screen to reset the firmware to v20B anymore. Recovery is also gone and I can't flash a new one.
Oh, and by the way: ADB doesn't recognize my phone either so I can't do "adb shell".
Help is very appreciated!
Click to expand...
Click to collapse
If your PC recognizes the phone, you should be able to start Kdz Firmware update tool, even without putting your device in f/w upgrade mode..connect it to your pc via sub cable, try to hard reboot it long-pressing power button, then:
1) try to reboot it while pressing down volume key;
2) if nothing happens, try to reboot normally, then start Kdz Fw update tool, and try to see if update starts..it should work, I think..
Sent from my LG P-880 - Official JB 4.1.2 V20A - Rooted - Unlocked Bootloader - Multirom V12 with JB 4.3.1 Vanir, JB 4.3 Pacman and JB 4.2.2 SuperXE Roms as secondary - using Xda premium
Hi people
Yesteday i bough a LG 4X and i wanted to put CM 10 on it.
I followed the normal instructions, but something went terrible wrong.
My can't get passed the loading LG logo now, and when i try to go to recovery i tells me the following.
ELGE_SECURITY3 ERROR: boot image signature
Critical failure: Unable to start kernel.
Unrecoverable bootloader error (0x0000002).
I have tried this guide:
http://forum.xda-developers.com/showthread.php?t=1861854
and this:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7&nocache=1&z=6539526249427472
I both cases i starts off well but then the USB suddenly wont reconize my phone and the screen turns gray.
Can anybody help !?!?!
install proper usb drivers , lg mobile support tool
try inserting the usb with pulled battery while holding vol down, after you accesd the download mode reinsert battery and follow one of the above guides. try it multiple times if you cant acces the download mode at the forst time
Sent from my LG-P880 using xda app-developers app
You didn't unlock a bootloader but you've installed custom recovery.
Use a KDZ to flash stock ROM.
kaad87 said:
Hi people
Yesteday i bough a LG 4X and i wanted to put CM 10 on it.
I followed the normal instructions, but something went terrible wrong.
My can't get passed the loading LG logo now, and when i try to go to recovery i tells me the following.
ELGE_SECURITY3 ERROR: boot image signature
Critical failure: Unable to start kernel.
Unrecoverable bootloader error (0x0000002).
I have tried this guide:
http://forum.xda-developers.com/showthread.php?t=1861854
and this:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7&nocache=1&z=6539526249427472
I both cases i starts off well but then the USB suddenly wont reconize my phone and the screen turns gray.
Can anybody help !?!?!
Click to expand...
Click to collapse
thats the problem now. 3 months ago that i wanted to unlock the bootloader , i just typed : adb drivers and got them. now if u search for adb drivers u will find a million posts that say nothing, because no one searches. since 3 months ive seen at least more 20 posts about unlocking the bootloader......... anyway. go download android sdk , the 32 bit version even if u r on windows x64. install , run, update it. u will get the drivers right. after that u can easily unlock the bootloader and install team win recovery or cyanogen recovery. use the all in one toolkit of afro. thats all.
really need big big help my phone does not turn on anymore because of an error i've made ,i was trying to unlock the bootloader then i choose the wrong file for the lg l90 d415 then it just turns off never turn back on , when i pull off the battery and plug it ,it shows a connected battery with a yellow warning panel with a question mark in it, i don't know what to do the phone can't power on ,plz somebody help me:crying:
tfat1000 said:
really need big big help my phone does not turn on anymore because of an error i've made ,i was trying to unlock the bootloader then i choose the wrong file for the lg l90 d415 then it just turns off never turn back on , when i pull off the battery and plug it ,it shows a connected battery with a yellow warning panel with a question mark in it, i don't know what to do the phone can't power on ,plz somebody help me:crying:
Click to expand...
Click to collapse
If you flashed an aboot.bin or abootb.bin then you've really screwed up. Take or send to the nearest LG Service Center. There is no flashing of anything required to unlock the bootloader on the LG-D415. Only enabling fastboot and issuing the oem unlock command is required to unlock the LG-D415.
Let me start by saying I am not a developer and have never even rooted a phone. A google search led me to this forum, and I hope someone here may be able to help me. I am not familiar with some of the terminology, but I am an engineer, so I can understand the concepts.
My L90 D415 died last night and is stuck with the following text on the screen:
[10800] fastboot_init()
[10900] USB init ept @ 0xffd8000
[10920] udc_start()
I downloaded the USB driver from the LG website, and the phone shows up in Device Manager as Marshall London Bootloader Interface.
I got several more lines on the screen when I plugged and unplugged the USB cable, including "fastboot: oops!" I'm guessing that's not good.
I have no clue what to do next. TIA for any help with this.
D415 is a PITA to unbrick. As it shows fastboot you may be able to flash TWRP custom recovery to flash a custom ROM. But first try to start the phone in download mode to flash stock KDZ, it's explained in another thread.
If you can't then probably your phone's partition table is messed up, join other threads where people are trying to unbrick it.