Inquiry on N7000 frequency band (can it be changed?) - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hello, i recently moved from Asia to North America and i found out that the frequency band requirement to be able to have the galaxy note n7000 working in Canada is to have bands 1700/2100. Is there any procedure that i can do to get this supported? Is it a change in baseband, modem, etc? If so, what baseband or modem should i be flashing to get the band 1700/2100 supported?
Would appreciate all suggestions on how to go about this. thank you!

No.

Related

[Q] Captivate on 900Mhz?

First, sorry of my poor english.
I bought this phone and use it in Hong Kong.
Now my carrier (HKCSL) provide dual band WCDMA 900/2100 Mhz service.
I want to use 900MHz because I know it can provide more and large coverage than 2100Mhz.
Is it prossible that this phone's hardware/communication chipset have 900Mhz?
If yes, any Rom, kernel or modem can turn 900Mhz on? May Rom/kernel developer can develop this function?
Thank you your help.
kitkitfok said:
First, sorry of my poor english.
I bought this phone and use it in Hong Kong.
Now my carrier (HKCSL) provide dual band WCDMA 900/2100 Mhz service.
I want to use 900MHz because I know it can provide more and large coverage than 2100Mhz.
Is it prossible that this phone's hardware/communication chipset have 900Mhz?
If yes, any Rom, kernel or modem can turn 900Mhz on? May Rom/kernel developer can develop this function?
Thank you your help.
Click to expand...
Click to collapse
you just mentioned it at the last part of your thread, try different modem in custom roms there is many to choose and not all phone with same model would give you same result and satisfaction as with another just try flashing and reflashing to get your sweet spot.
gorgy76 said:
you just mentioned it at the last part of your thread, try different modem in custom roms there is many to choose and not all phone with same model would give you same result and satisfaction as with another just try flashing and reflashing to get your sweet spot.
Click to expand...
Click to collapse
I have just try Darky Rom/speedmod/JVE.
Is that possible?
Does the Captivate work on WCDMA 900???? is that possible if i flash a different modem??
No. the only bands the captivates can pick up is 850 and 1900.

[Q] baseband change not working

Hi guys, my first post here but i has been following your roms and forum since a year or so
i bought a moto milestone from ebay free free operator and i brought it here to colombia my country, my operator is tigo 850/1900/2100 but i never been able to activate 1900 band.
is possible activate my baseband to 1900 and get 3g working?
i already tried openrecovery for change baseband to some country/operator with the baseband combo 850/1900/2100 but it never works
i have just right now miui lastest version, lastest openrecovery and i know how to root, how to unroot and the basic knowledge about install roms
any help is so much appreciated
BLacKR1D3R said:
Hi guys, my first post here but i has been following your roms and forum since a year or so
i bought a moto milestone from ebay free free operator and i brought it here to colombia my country, my operator is tigo 850/1900/2100 but i never been able to activate 1900 band.
is possible activate my baseband to 1900 and get 3g working?
i already tried openrecovery for change baseband to some country/operator with the baseband combo 850/1900/2100 but it never works
i have just right now miui lastest version, lastest openrecovery and i know how to root, how to unroot and the basic knowledge about install roms
any help is so much appreciated
Click to expand...
Click to collapse
Try setting up your 3G by changing the APN in Mobile Network Settings.
thx for your answer, i have the rigth settings in the APN, and i have edge data only.

[SOLVED] an idea to make ICS work with original thrill bands (at&t)

found a way to extract with this tool.
attached the baseband for whoever wants it.
final result = endless boot loop.
ORIGINAL POST:
Hello,
I tried to flash the new ics port, with different basebands but the reception wasn't good.
my carrier works on 3G 2100/850mhz bands, and no 2G support.
did a little research and found:
p920 supports 2100 mhz (and others but not 850 mhz) 3g band
p920h supports 850 mhz (and others but not 2100 mhz) 3g band
any of those bands alone gives me half of the reception coverage.
however p925 basebands support both 850 and 2100 mhz.
when i flashed at&t official GB rom from here, i've got full support of my network, wich is by the way not at&t, but Pelephone, Israel.
my idea is to dump the GB baseband from original at&t's rom
and flash it after flashing the new ICS port (instead of the given XBSA404_CP.fls), which i think should work with the GB baseband.
my question to you guys is how can we dump only the baseband from at&t official rom
and flash it on an ICS thrill ?
and do you think this should work ?
Thanks in advance, ValkA.
ValkA said:
Hello,
I tried to flash the new ics port, with different basebands but the reception wasn't good.
my carrier works on 3G 2100/850mhz bands, and no 2G support.
did a little research and found:
p920 supports 2100 mhz (and others but not 850 mhz) 3g band
p920h supports 850 mhz (and others but not 2100 mhz) 3g band
any of those bands alone gives me half of the reception coverage.
however p925 basebands support both 850 and 2100 mhz.
when i flashed at&t official GB rom from here, i've got full support of my network, wich is by the way not at&t, but Pelephone, Israel.
my idea is to dump the GB baseband from original at&t's rom
and flash it after flashing the new ICS port (instead of the given XBSA404_CP.fls), which i think should work with the GB baseband.
my question to you guys is how can we dump only the baseband from at&t official rom
and flash it on an ICS thrill ?
and do you think this should work ?
Thanks in advance, ValkA.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1338383
Original GB 1.8a baseband, in .fls format. I dont know why you need to go through all of this, you can flash this AT&T Baseband ontop of a Thrill (P925) WITH the ICS port to have 3G. Shoot, I have HSPA on mine.
the 1.8 baseband is made for p920, which doesn't support both 3G 2100 and 850 mhz, it supports only 2100.
i will have HSPA with this baseband, but with a little network coverage.
with the p925 baseband i have full network coverage, thats why all the effort.
you were right, i tried to flash it one more time and it works now!

[Q] Euro LTE and Global LTE

I'm trying to update my device and my current firmwares network is Global Lte, of course I have flashed a firmware with Euro Lte before, but just out of curiosity, can someone explain the difference between these two networks?
Thanks.

Flashing Radio for 4G LTE Bands

I have an XT1058 in Pakistan on Rogers 5.1 ROM but the LTE band used here is band 3 (1800 MHz), which the XT1058 does not support. I haven't tried running LTE on it yet but can I flash XT1052 (Europe and Asia Retail) radios on my phone? Or flash whole SBF? Is there any way to unlock band 3? Would it brick my phone?
@KidJoe Please help.
Thanks
RafaySid said:
I have an XT1058 in Pakistan on Rogers 5.1 ROM but the LTE band used here is band 3 (1800 MHz), which the XT1058 does not support. I haven't tried running LTE on it yet but can I flash XT1052 (Europe and Asia Retail) radios on my phone? Or flash whole SBF? Is there any way to unlock band 3? Would it brick my phone?
@KidJoe Please help.
Thanks
Click to expand...
Click to collapse
Band support on the 2013 X relies on hardware and software(rom/radio code), BOTH have to support the bands you want to use. If the hardware doesn't support it, flashing a rom/radio that does wont help.

Categories

Resources