Database Develop

[Q] is there a rom that can be stable overclock on the 806 frequency?

I use gingerdx v12 and can sometimes restart itself (unstable)

Look the best of your processor oc.
If you get reboot at 806, it mean your device can't oc to 806
If you bestest overclock, i mean like your best oc is 768, that mean you only can oc from 0 Mhz (??) -- > 768 Mhz
Not connect with your rom!
Hit thanks if i helped you!
Edit: Also wrong thread section, it must at Q&A

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Post questions in q&a section.
Each phone has different maximum overclock frequency. The rom doesn't matter, the phone does.

processor might be working harder,i'm affraid overclocking my phone in 800mhz..
i think oc in 710 should be nice and stable but batery drains more faster

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Although there might be a relationship between ROM and Overclock Stability, repeated test on various ROMS still gets me the same OC max of 748Mhz.
Please note that overclockability of the CPU depends on the CPU. Not all CPU's of the same make are equal. the design of our X8 called for a 600Mhz CPU clock, so it goes that it will be and always be stable at 600 Mhz. However go more than that and you have no guarantee at which Max Clock you will get. If you could go to 800 without FC and/or reboots then consider yourself very lucky.

for me.. i can't go far.. im using GingerCruzt.. and it has an option on overclocking.. once i checked the overclocked my phone reboots always..

I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium

OC 806Mhz
Nxmate said:
I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium
Click to expand...
Click to collapse
I can confirm OC @806Mhz with GC OC module (instead of DX's), running on MiniCM7 2.0.7...stable.

hmm when i using gingerDX v11, i tried overclock to 806Mhz and it stable for a while, but in 5 minutes i think, my device get reboot...
all roms can stable at 787Mhz in my device.. no reboot no force close... just stable and smooth, but battery drain

[Q] PurePerformance

http://dl.xda-developers.com/attach.../9/8/4/4/4/Screenshot_2014-02-24-16-59-20.png with pureperfomance.
http://dl.xda-developers.com/attach.../9/8/4/4/5/Screenshot_2014-02-24-19-31-43.png without pureperfomance.
How is this possible?

eldoradosb said:
http://dl.xda-developers.com/attach.../9/8/4/4/4/Screenshot_2014-02-24-16-59-20.png with pureperfomance.
http://dl.xda-developers.com/attach.../9/8/4/4/5/Screenshot_2014-02-24-19-31-43.png without pureperfomance.
How is this possible?
Click to expand...
Click to collapse
Sense ROMS tend to be slow and laggy...Try CM10 based ROMS, or just CM10...And then install pure performances...I am pretty sure you should get 4XXX+ score...tested with antutu benchmark...
Also, make sure you installed stock pure performances since you are using stock based ics rom...

warrior1208 said:
Sense ROMS tend to be slow and laggy...Try CM10 based ROMS, or just CM10...And then install pure performances...I am pretty sure you should get 4XXX+ score...tested with antutu benchmark...
Also, make sure you installed stock pure performances since you are using stock based ics rom...
Click to expand...
Click to collapse
in cm10,ihave 2796score in antutu benchmark.......

tekken 2 said:
in cm10,ihave 2796score in antutu benchmark.......
Click to expand...
Click to collapse
I always get 4xxx score on minicm 10 without any tweak like pure performance...
I just overclock my phone to 800 MHz and governor- Smartass V2 or Performance and BOOM:laugh:

tekken 2 said:
in cm10,ihave 2796score in antutu benchmark.......
Click to expand...
Click to collapse
Go to Settings > Performance > Governor > Max CPU freq whatever is the max according to the kernel, Set Min CPU freq to the max.
And other tweaks as well. Then run the benchmark test.

This is the mini CM10 almost nothing better .. (instead pureperformance I put Reincarnation Engine)

CM11 with 3.0 kernel with overclocking?

Like the title says. I'm running the latest jscullins snapshot and it works great, but I can only get thee CPU to 1.9GHz and the GPU won't budge, it just resets. I had previous versions with kernels and I was able to do over 2GHz without issue and GPU some, but I forgot the amount. I can't seem to find any kernels like this for CM11.
Any ideas?

There aren't any other kernels available for CM11. I think only shumash's kernel for Android 4.2 and below can overclock the device to 1.9GHz successfully.

Overclock recommendation please
Seanbest said:
Like the title says. I'm running the latest jscullins snapshot and it works great, but I can only get thee CPU to 1.9GHz and the GPU won't budge, it just resets. I had previous versions with kernels and I was able to do over 2GHz without issue and GPU some, but I forgot the amount. I can't seem to find any kernels like this for CM11.
Any ideas?
Click to expand...
Click to collapse
I'd like some good recommendations for overclock options and the pros and cons if possible.

what is the best overclock kernel

Hello Guys !
My SGS is running with Mackay Rom 4.9.7
With the Mackay Kernel, the device can't handle even -25 mv undervolt - it crashes when i load something CPU heavy.
1.4 , 1.3 , 1.2 , even 1.1 Ghz is not running stable for long load, i tried undervolt and even overvolt for all of this frequencies - it crashes and restarts.
Would you recommend me good kernel for maximum overclock of the device ?
I have searched on Google , but i can't find the information that i want - there is no list for kernels, kernel opinions and recommendations anywhere.

AtanasP said:
Hello Guys !
My SGS is running with Mackay Rom 4.9.7
With the Mackay Kernel, the device can't handle even -25 mv undervolt - it crashes when i load something CPU heavy.
1.4 , 1.3 , 1.2 , even 1.1 Ghz is not running stable for long load, i tried undervolt and even overvolt for all of this frequencies - it crashes and restarts.
Would you recommend me good kernel for maximum overclock of the device ?
I have searched on Google , but i can't find the information that i want - there is no list for kernels, kernel opinions and recommendations anywhere.
Click to expand...
Click to collapse
For me the only Kernel that looks stable overclocked (1.2 Ghz) is Semaphore. It's a normal thing for your device to crash on high frequencies. The lack of a cooler makes your CPU hot and in order to prevent damage it crashes. At 1.2 Ghz it should work fine without any crashes (as long as the CPU governor is set ondemand)

kalpetros said:
For me the only Kernel that looks stable overclocked (1.2 Ghz) is Semaphore. It's a normal thing for your device to crash on high frequencies. The lack of a cooler makes your CPU hot and in order to prevent damage it crashes. At 1.2 Ghz it should work fine without any crashes (as long as the CPU governor is set ondemand)
Click to expand...
Click to collapse
I use semaphore with stock volt and 1.2 Ghz SmartassV2 - Noop and it work flawlesly

Ehndroix V + Neo Kernel // CyanAOSP + CyanCore
Using Neo Kernel, probably the best kernel i ever used so far.
It bases on Linaro 4.9, while the most other Kernels sit at 4.7 still.
For Antutu it keeps up at its highest preset: 1.32 GHz (Intelliactive) and I/O: BFQ (Stock). Getting impressive 6059 points.
For daily use i have it at 1.2 GHz, had no crash yet.
The kernel runs butter smooth with Ehndroix V.
The Best Kernel for Gaming is probably the CyanCore Kernel, if you use it with CyanAOSP (comes Stock with CyanCore Kernel) its the smoothest gaming experience so far i had on this device after the Legendary GamerzRom..

Q>performance of MD4?

Can anyone help me i am looking for a complete benchmark of Motorola droid 4 (any rom) the web reviews cant help me so much i want to see if it suits of my needs so i can buy it !
thanks

giannhs_n said:
Can anyone help me i am looking for a complete benchmark of Motorola droid 4 (any rom) the web reviews cant help me so much i want to see if it suits of my needs so i can buy it !
thanks
Click to expand...
Click to collapse
If you need benchmarks, the droid 4 is not for you.
Sent from my DROIDX using Tapatalk

I am not an android geek'er !
sd_shadow said:
If you need benchmarks, the droid 4 is not for you.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
i had xperia pro(its nearly broken) i just want to compare the results to see if they are similar because they are both old phones and i need the qwerty keyboard...and some basic multitasking without lags, it would be helpful if you can give me a screen shot of anutu benchmark of your phone or droid 4, numbers always help to decide when you compare 2 phones.
Regards
John

Antutu v5.2.0 on my Droid 4 with Slimkat 8.8 and Lucize jbx kernel scores 16504 @ 1300mhz CPU / 384mhz GPU, and with the CPU fully overclocked to 1404mhz it scored 17112
1200mhz is stock on the CPU and 307mhz on the GPU.

Elanzer said:
Antutu v5.2.0 on my Droid 4 with Slimkat 8.8 and Lucize jbx kernel scores 16504 @ 1300mhz CPU / 384mhz GPU, and with the CPU fully overclocked to 1404mhz it scored 17112
1200mhz is stock on the CPU and 307mhz on the GPU.
Click to expand...
Click to collapse
did you compile it by your self? because i am not able to change the gpu/cpu values with root explorer/terminal
*i flashed lucize wip kernel
if its a custom build by you with oc,can you share it plz? thanks !

giannhs_n said:
did you compile it by your self? because i am not able to change the gpu/cpu values with root explorer/terminal
*i flashed lucize wip kernel
if its a custom build by you with oc,can you share it plz? thanks !
Click to expand...
Click to collapse
It has to be the "JBX" kernel, lucize has decided to remove this file from his post for some reason, I've attached it to this post. It's based off dtrail's JBX kernel for the motorola RAZR, you can flash that kernel to the device too but I found the radio signal level would read wrong, so I have always used this one.

Elanzer said:
It has to be the "JBX" kernel, lucize has decided to remove this file from his post for some reason, I've attached it to this post. It's based off dtrail's JBX kernel for the motorola RAZR, you can flash that kernel to the device too but I found the radio signal level would read wrong, so I have always used this one.
Click to expand...
Click to collapse
seems okay it has overclocked gpu and uv/oc-+ cpu plus governors :good:
i will see the battery now
Thanks for sharing :cyclops:

Hi!
Is it possible to use "JBX" kernel with stock ROM? Or maybe only module that allowing GPU overclocking?

Borchuck said:
Hi!
Is it possible to use "JBX" kernel with stock ROM? Or maybe only module that allowing GPU overclocking?
Click to expand...
Click to collapse
you can use it with stock rom,it has stock sources

giannhs_n said:
you can use it with stock rom,it has stock sources
Click to expand...
Click to collapse
Can you tell me how to do this?
Thanks in advance!

Borchuck said:
Can you tell me how to do this?
Thanks in advance!
Click to expand...
Click to collapse
You need to be rooted and have a recovery installed like TWRP / safestrap, you install that kernel zip just as you install a third party ROM through recovery. If you just want GPU overclock don't bother, the increase from 307 to 384mhz only increases GPU performance by maybe 5%, it's purposely set to 307mhz stock because the GPU is bottlenecked elsewhere (ie: memory bandwidth), 384mhz increases battery drain and heat without much performance gain.

Elanzer said:
You need to be rooted and have a recovery installed like TWRP / safestrap, you install that kernel zip just as you install a third party ROM through recovery. If you just want GPU overclock don't bother, the increase from 307 to 384mhz only increases GPU performance by maybe 5%, it's purposely set to 307mhz stock because the GPU is bottlenecked elsewhere (ie: memory bandwidth), 384mhz increases battery drain and heat without much performance gain.
Click to expand...
Click to collapse
When I install that kernel on my stock ROM/partition the phone doesn't even boot...
How much you can overclock CPU?

Borchuck said:
When I install that kernel on my stock ROM/partition the phone doesn't even boot...
How much you can overclock CPU?
Click to expand...
Click to collapse
After much testing I could only get 1391mhz 100% stable, regardless of voltage settings. Could get 1.5ghz to benchmark, but never fully stable. It does speed up the phone quite a bit, but the biggest improvement is simply using a debloated ROM with every APK removed that you can.

Elanzer said:
After much testing I could only get 1391mhz 100% stable, regardless of voltage settings. Could get 1.5ghz to benchmark, but never fully stable. It does speed up the phone quite a bit, but the biggest improvement is simply using a debloated ROM with every APK removed that you can.
Click to expand...
Click to collapse
Thank you very much but as I said I can't manage to install this kernel on the stock ROM/partition...