Related
PDA : I9100GDXLP6
PHONE : I9100GDXLP6
CSC : Unknown
Build Info : Wed May 23 18:51:40 KST 2012
I update the latest firmware using KIES. Then when i using *#1234# show this result.
Question :
1. Is this thing i must worry? i already browse google and xda forum almost similar like this but other version of country.
2. I can't connect to KIES after KIES update. i see some people can change the modem to pda or usb. but i can't after ICS update.
(sorry for advance for my bad english)
Hope you all can help me. Thx for advance
hello Nazz Mid
i will help you but about the detail of csc unkown refer here:http://androidforums.com/samsung-galaxy-s2-international/528572-what-does-mean.html so basically we have to unroot the device before ota update.but try flashing ics 4.0.3 with odin from here:http://forum.xda-developers.com/showthread.php?t=1679636 But dont update with kies or from the phone itself since the download can become corrupted and effect the rom.
hey darkshadow1997,
thx for helping me. but my phone never root and i update ICS using KIES.
so should i just follow your step reflash the stock rom using ODIN?
well try it and see if it fixes your problem.
darkshadow1997 said:
well try it and see if it fixes your problem.
Click to expand...
Click to collapse
I already google and search about CSC. people say that this is kind of bug of firmware. already flash few stock ROM download from this XDA site and SAMMOBILE site. but still CSC still unknown. thanks for helping me. Maybe its firmware problems? Need to wait until new update release then will the result.
http://www.jayceooi.com/2011/09/03/how-to-change-csc-on-samsung-galaxy-s2/
here is some website that show how to change CSC but when i do this there is none to be selected. weird...
already try to flash the stock firmware with or without sim card.
annoying bug -.-
csc unknown
csc shows unknown in my sII i9100g. can i flash a custom rom without any problem? like sony mobile if i flash 4.3 rom should i flash a kernel for particular rom?pls clarify.thanx in adv.
HI all,
I need help with my phone Samsung S Advanced i9070. When there is no signal my phone reboot's same is when i turn on airplane mode ON.
This problem doesn't happen when i have no sim card in my phone but when there is a SIM it keep's rebooting. I did a SIM change and it still happen's. I did Factory reset and hard reset and i have the standard ROM, 2.3.6 build GINGERBRED.XXLD3 Kernal 2.5.35.7 the phone is unlocked and not rooted any more.One more thing i noticed is that when i press power off it doesn't turn of it reboot's.
Any advice ?
Thank you v mutch.
flash stock rom via odin if that help
nyanyanyanyanyanyanyanyanyanyanyan
Can you link me any instruction's for this phone? I worked in odin on a galaxy ace but long ago. So i will need a tut for i9070 if you can provide it?
I have serched everywhere and i cant finde how to flash it and the flash files. I cant even tell what's the newest firmware.
Plz help.
Any one?
Curent version is PDA i9070xxld3 CSC i9070OXFLE1
I cant finde it any where... Plz i need help :/
You will find the stock firmware on samfirmware (I would recommend I9070XXLE2... ). Use Odin to do the reflashing.. Here there is an XDA index for I9070 :
http://forum.xda-developers.com/showthread.php?p=33032022&postcount=4
rooting I9070PXXLK2
Hi guys, I read this forum, and I need your help.....
is it possible to root this one please?
Phone: I9070PXXLK2
Android version 2.3.6
Baseband version I9070PXXLK2
Kernel version 2.6.35.7
Build number gingerbread.XXLK2
thanks a lot
What kind of phone is it?
Sent from my SGH-I317 using xda app-developers app
Hi, guys! I have Samsung Galaxy S 3 LTE GT-i9305, without IMEI and baseband version...
I rooted my SGS 3 with ODIN but made a mistake.
First attempt - I have chosen partition "PHONE" instead of "PDA" in ODIN and flashed it...With CWM recovery file. This way I killed my modem baseband and lost IMEI...And now SGS 3 can not find any GSM network...(((
Second attempt - I have rooted it succesfully ( have chosen the right part i"PDA")
Now SGS 3 is working only as a PAD ( WiFi and Bluetooth are working) but no GSM network can be found.
Tried to flash it with full firmware(including modem rom and kernel) via ODIN. Everything finished succesfully. But when the phone is turned on after flashing - again NO IMEI, no BASEBAND Version...
Can somebody help me, please?
VERY APPRECIATED for ANY ADVISES and IDEAS
Andrew111 said:
Hi, guys! I have Samsung Galaxy S 3 LTE GT-i9305, without IMEI and baseband version...
I rooted my SGS 3 with ODIN but made a mistake.
First attempt - I have chosen partition "PHONE" instead of "PDA" in ODIN and flashed it...With CWM recovery file. This way I killed my modem baseband and lost IMEI...And now SGS 3 can not find any GSM network...(((
Second attempt - I have rooted it succesfully ( have chosen the right part i"PDA")
Now SGS 3 is working only as a PAD ( WiFi and Bluetooth are working) but no GSM network can be found.
Tried to flash it with full firmware(including modem rom and kernel) via ODIN. Everything finished succesfully. But when the phone is turned on after flashing - again NO IMEI, no BASEBAND Version...
Can somebody help me, please?
VERY APPRECIATED for ANY ADVISES and IDEAS
Click to expand...
Click to collapse
Check out my sticky thread in the dev section:
http://forum.xda-developers.com/showthread.php?t=1946915
The solution is at the bottom of the first post. You need to download and flash the PARAM binary to your device and all will be well.
Sent from my GT-I9305 using Tapatalk 2
Hi lyriquidperfection . Your imei thread seriously need to be a sticky in "Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A" .
No IMEI
Andrew111 said:
Hi, guys! I have Samsung Galaxy S 3 LTE GT-i9305, without IMEI and baseband version...
I rooted my SGS 3 with ODIN but made a mistake.
First attempt - I have chosen partition "PHONE" instead of "PDA" in ODIN and flashed it...With CWM recovery file. This way I killed my modem baseband and lost IMEI...And now SGS 3 can not find any GSM network...(((
Second attempt - I have rooted it succesfully ( have chosen the right part i"PDA")
Now SGS 3 is working only as a PAD ( WiFi and Bluetooth are working) but no GSM network can be found.
Tried to flash it with full firmware(including modem rom and kernel) via ODIN. Everything finished succesfully. But when the phone is turned on after flashing - again NO IMEI, no BASEBAND Version...
Can somebody help me, please?
VERY APPRECIATED for ANY ADVISES and IDEAS
Click to expand...
Click to collapse
Did you fix your phone yet?
Nadn07 said:
Did you fix your phone yet?
Click to expand...
Click to collapse
YES. I fixed it.))))) Thanks a lot.
Andrew111 said:
YES. I fixed it.))))) Thanks a lot.
Click to expand...
Click to collapse
how did u get it fixed?? please write the procedure....thanx
imooraja said:
how did u get it fixed?? please write the procedure....thanx
Click to expand...
Click to collapse
I also lost imei and modem on my 1 day old 9305 by flashing cwm for i9300 and hadn't backed up the imei.
I followed lyriquidperfections link and downloaded the software to my laptop.
When I ran the software it backed up the imei from somewhere on the phone I then ran restore and Param steps and all was restored succesfully. Phew what a relief that was!!!!
I then reflashed correct cwm and rom of choice and all was well.
Just follow the instructions on the page.
Thanks Lyriquidperfection.
I have same problem, tried the procedure on page 1. No luck! Sent back to service with counter reset, still waiting for collection.
lyriquidperfection said:
Check out my sticky thread in the dev section:
http://forum.xda-developers.com/showthread.php?t=1946915
The solution is at the bottom of the first post. You need to download and flash the PARAM binary to your device and all will be well.
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
I have the exact same problem. Do you have a flashable PARAM binary for the i747??
Thank you!
DroidJay123 said:
I have the exact same problem. Do you have a flashable PARAM binary for the i747??
Thank you!
Click to expand...
Click to collapse
This is not I747 forum .
Hello, I've recently tried to root my girlfriend's phone and since doing so the wi-fi does not operate correctly.
The symptom of the issue is that after enabling wi-fi it takes about 10 seconds to indicate that it has switched on. The phone searches for wi-fi networks for about 10 seconds and then stops searching and turns off wi-fi.
The details of the phone are:
-------------------------------------------------------------------------------------
FIRMWARE VERSION : 2.3.5
BASEBAND : I9000NEJVB
KERNEL VERSION : 22.6.35.7-I9000NEJVK-CL649158
[email protected] #2
BUILD NUMBER : GINGERBREAD.NEJVK
-------------------------------------------------------------------------------------
I have attempted to use the following CF-Root versions:
CF-Root-XW_XEE_JVB-v3.1-CWM3RFS
CF-Root-XX_OXA_JVK-v3.1-CWM3RFS
CF-Root-XX_OXA_JVK-v2.8-CWM3RFS
CF-Root-XX_OXA_JVR-v4.1-CWM3RFS
I have been using Odin3 v3.07.
Any help would be appreciated, even if it to get the phone back to factory standard with working wi-fi would be great.
Thanks in advance,
Andy.
My HOW TO GUIDE has what you need at bottom
EwOkie said:
My HOW TO GUIDE has what you need at bottom
Click to expand...
Click to collapse
Thanks, is it the FLASH JVU 2.3.6 BEFORE CUSTOM ROM section I need to follow?
If you want it back to stock then follow the Section :
HOW TO GUIDE : TUTORIAL TO FLASH 2.3.6 JVU + ROOT BEFORE INSTALLING CUSTOM ROM
To Be safe when ODIN opens up put in the PIT File in PIT also and make sure all 3 are ticked on the left side
Re-Partition / Auto Reboot and Reset Time.
Then put your 3 files in PDA / Modem / CSC and hit start... GUIDE explains this
Good luck
EwOkie said:
Then put your 3 files in PDA / Modem / CSC and hit start... GUIDE explains this
Good luck
Click to expand...
Click to collapse
Thanks mate, getting it back to stock worked a treat. Unfortunately the CF-Root package failed and I had to apply JVU again to get it working again - much better off than I was anyway
But I do need to root the phone to unlock it, so I might look into other CR-Root versions that may be compatible.
Any suggestions welcome though, thanks again.
Andy.
Hi Guys... Need more guide for me the newbie please...
I 've tried to upgrade my GT-N7000 (DXLSE - JELLYBEAN) to some kitkat rom such as omnirom, cm, carbon etc, and it all installed successly...
But there was always problem with my network services, its very unstable (No service / No Internet Connection) but wifi connection is normal
When i reflash (reinstall) back to JellyBean (4.1.2), every problem above has gone, there is no network problem in my GT-N7000...
I 've been tried every step as your guide above (flash kitkat rom), the same problem always happened (network problem)... please help... i really want the kitkat rom in my GT-N7000... Thx Guys...
My Android Stuff is :
GT-N7000 (DXLSE)
JellyBean 4.1.2
Anyway... I 've set the APN... but the problem still the same...
Please Help...
Network Service Unstable after upgrade to Kitkat.. Please Help...
Please...
I 've tried to upgrade my GT-N7000 (DXLSE - JELLYBEAN) to some kitkat rom such as omnirom, cm, carbon etc, and it all installed successly...
But there was always problem with my network services, its very unstable (No service / No Internet Connection) but wifi connection is normal
When i reflash (reinstall) back to JellyBean (4.1.2), every problem above has gone, there is no network problem in my GT-N7000...
I 've been tried every step as your guide (flash kitkat rom) in this posting :
[Guide] A guide to KitKat
(http://forum.xda-developers.com/showthread.php?t=2780703&page=10#post57554344),
But the same problem still always happened (network problem)... please help... i really want the kitkat rom in my GT-N7000... Thx Guys...
My Android Stuff is :
GT-N7000 (DXLSE)
JellyBean 4.1.2
I 've set the APN... but the problem still the same...
Please Help...
This is my Phone About .. before kitkat and after kitkat...
1. JB 412 (Build : JZO54K.N7000DXLSE)
2. KITKAT CARBON (Build : KTU84Q)
3. CM11 (Build : KTU84)
Is the build number the problem? Will my problem solve ig i can get th custom rom (build JZO54K) too...?
Please guide...
In cm11 kk mode I see that your baseband is registered as unknown. Baseband is your modem which allows u to receive mobile connection thus data connection. Again I urge you to find and download a modem from all modem thread by spacetaxi, XXLT3 recommended and flash it in recovery. After that recheck your baseband info.
In carbon I see that your baseband is registered properly. Were u still unable to connect to network?
Jackwu696 said:
In cm11 kk mode I see that your baseband is registered as unknown. Baseband is your modem which allows u to receive mobile connection thus data connection. Again I urge you to find and download a modem from all modem thread by spacetaxi, XXLT3 recommended and flash it in recovery. After that recheck your baseband info.
In carbon I see that your baseband is registered properly. Were u still unable to connect to network?
Click to expand...
Click to collapse
Hi jack... thx the attention..
Still same bro... no network services...
In JB 4.1.2 i tried many type modem.zip... and it s all working fine...
But when in kitkat... no matter i tried any modem... its all not working fine... always no network services...
Anyway.. i think... maybe it s enough for me to stay on JB 4.1.2... lol...
At least until i have new idea to try it out...
Thx bro...
Kitkat and Lollipop Running Well... Case Close...
poor us can't find solution for this
i have same issue mate you are not alone lol
Yup bro... I am not so sure.. But until i lose my imei... Then i get the imei back... Now i can get the kitkat running well... Even lollipop can run well now on my gt-n7000 ...
i follow the same step mention on kitkat treads.
my imei when i was on ics was 0049 something cant remember.
when flash omni 4.4 no connection to my device.
baseband are correct and the imei still not change.
then i downgrade to N7000DXLSE_N7000OLBLSE_XME and got bootloop.
then i flash N7000XXLA6_N7000XEULA1_XEU which is android version 2.3.5, then flash dr ketan's xxkj1 factory.
device booted normally with roots access.
i can connect to data connection , with 0049 imei .
what was missing there? why when on 4.4 cant connected to data?
or do i need to flash ics again ?
can someone help me?
---------- Post added at 11:40 AM ---------- Previous post was at 11:40 AM ----------
i follow the same step mention on kitkat treads.
my imei when i was on ics was 0049 something cant remember.
when flash omni 4.4 no connection to my device.
baseband are correct and the imei still not change.
then i downgrade to N7000DXLSE_N7000OLBLSE_XME and got bootloop.
then i flash N7000XXLA6_N7000XEULA1_XEU which is android version 2.3.5, then flash dr ketan's xxkj1 factory.
device booted normally with roots access.
i can connect to data connection , with 0049 imei .
what was missing there? why when on 4.4 cant connected to data?
or do i need to flash ics again ?
can someone help me?