Related
Hello all,
The past day or so I have been attempting to install a fresh custom rom on my vzw tablet. I presently have a stock copy of DJ11 that is rooted installed.
When I put the device into download mode and connect to the computer, Heimdall (version 1.1.1) gives me the following error
Failed to access device. Error: -12
I have tried reinstalling the drivers, both off of the tablet and from the ZAdiag program included with Heimdall and the error persists. I have tried many different combinations of opening/closing heimdall/disconnecting and reconnecting the tablet while in download and out of download, and I have tried on two different PCs. Nothing seems to fix the problem.
I have seen another post on the forums about this particular issue, but the method of resolution that user was able to make work has not worked for me.
It seems to me that the tablet itself is to blame, like it is locking Heimdall out.
Basically at this point, any rom that requires use of Heimdall to install is not going to work. I do have CWM3 and the Verizon Bootstrapper installed, so if anyone has a link to a completely stock copy of the rom that comes in a zip, please link it as I would like to try that method of installing a new rom.
Thank you for any insight at all!!
Have you checked with odin to make sure the tablet is not connecting?
I had the same problem and pluged the device in another usb port, then hold power, volume down e home and after a while odin showed the yellow bar.
then disconnected it and put in another usb port, after that heimdall found it.
and to mention my tablet was dead, no screen no donwload mode, and not responding to button press. and still i was able to connect and ressurect it doing this.
Thanks for the good idea! When I connect it with Odin open, I get the yellow bar. I think that Heimdall is connecting as well, it just isn't being allowed to make any changes. Access denied is my suspicion. I'm not sure what would cause that, or how to correct it.
animaldito said:
Have you checked with odin to make sure the tablet is not connecting?
I had the same problem and pluged the device in another usb port, then hold power, volume down e home and after a while odin showed the yellow bar.
then disconnected it and put in another usb port, after that heimdall found it.
and to mention my tablet was dead, no screen no donwload mode, and not responding to button press. and still i was able to connect and ressurect it doing this.
Click to expand...
Click to collapse
I am pleased to report that I was able to find a solution. With Odin running, I was getting a yellow bar indicating the device was connected. I ran Heimdall while Odin was still open...and voila, it worked without a hitch.
Thanks again for the assistance. Keep this one tucked away in your memory in case you ever experience something similar!
You can also update the USB drivers through Heimdall like the instructions say.... Might be a safer way than to have ODIN open too...
You just need to downgrade the usb drivers after using Heimdall to use ODIN again...
ultramag69 said:
You can also update the USB drivers through Heimdall like the instructions say.... Might be a safer way than to have ODIN open too...
You just need to downgrade the usb drivers after using Heimdall to use ODIN again...
Click to expand...
Click to collapse
I had updated the drivers through Heimdall. Both in regular boot mode, and in download mode. Whatever caused the problem, it is seemingly fixed. I just hope it stays that way!
i attempted to flash my captivate from stock 2.1 to fasty 2.2 with odin, I read through a bunch of different forums and i thought i had everything set up properly and then flashing afterwards when i attempted to boot up the phone it would flash the at&t screen like its going to turn on repeatedly. so the thing with the phone is that none of the button combinations work to get the emergency recovery or download mode so i was forced to make a jig. i made the jig and it work putting into download mode but the problem from here is i cant get it to connect to my pc, when i plug it in i get a "USB Device Not Recognized" message and neither odin or heimdall will recognize it. i do not think its the cord because the cord im using now has been the cord i was using beforeand my phone was always recognized while i was using it. i hope someone may have some insight for me on this problem or i will be losing the nicest phone ive ever had that i only got to use for a few short weeks, someone pleas help.
Heimdall drivers / Samsung drivers conflict with each other. Try removing the Heimdall drivers and reinstalling the Captivate drivers (don't forget to reboot ur computer). Then right click and run as administrator the Odin 1st. Then connect ur usb to the back of ur computer if u r on a desktop or 1st port if u r on a laptop. then connect ur phone in download mode and see if Odin recognizes it.
^ this
sent from a Semaphorized Mosaic Cappy
ok, i run 32 bit-xp (ancient technology i know) i go into the control panel and find SAMSUNG USB Drivers for mobile phones, and those are the only drivers i can find, if there are other drivers for my phone would i have to get rid of them another way? and if so where do i find them?
using my friends computer i have odin and the drivers, his computer recognizes my phone and it comes up on odin when i plug it in after using the jig to put it into dl mode but once i master clear nothing happens it says master clear started and it just sits there no progress bar on the phone nothing happens in odin.... please help
okeefj09 said:
using my friends computer i have odin and the drivers, his computer recognizes my phone and it comes up on odin when i plug it in after using the jig to put it into dl mode but once i master clear nothing happens it says master clear started and it just sits there no progress bar on the phone nothing happens in odin.... please help
Click to expand...
Click to collapse
I'd say that you shouldn't worry about doing master clear from Odin. If you can fully boot to whatever ROM you're using (even stock), there is an option in the settings menu to format your Internal SD card, which is the same thing as a master clear.
However, if you're just trying to flash stock, don't worry about the master clear at all. Just flash the stock rom and be on your way.
well the phone is completely bricked, before it was just repeatedly rebooting when i turned it on cause i failed to flash to the rom properly because im extremely new to the whole "phone modifying" thing and i was rushing which is not what your suppose to do cause these are very delicate processes, but now after plugging into the computer and attempting to master clear with odin when i turn it on i get the whole (cellphone Icon)..!..(computer icon) thing on my screen, i can still put it into dl mode from here with the jig i made but with my extreme noobness to this type of thing im not sure what to do still.. i dont want to mess up my phone any worse than i already have (if thats at all possible) and its just looking like i turned my phone into a paper weight at this point.
okeefj09 said:
well the phone is completely bricked, before it was just repeatedly rebooting when i turned it on cause i failed to flash to the rom properly because im extremely new to the whole "phone modifying" thing and i was rushing which is not what your suppose to do cause these are very delicate processes, but now after plugging into the computer and attempting to master clear with odin when i turn it on i get the whole (cellphone Icon)..!..(computer icon) thing on my screen, i can still put it into dl mode from here with the jig i made but with my extreme noobness to this type of thing im not sure what to do still.. i dont want to mess up my phone any worse than i already have (if thats at all possible) and its just looking like i turned my phone into a paper weight at this point.
Click to expand...
Click to collapse
Don't panic - the phone--/!\--pc screen will work the same way as download mode.
Just start up odin, let it settle, hook up you phone with that screen on, and see if Odin sees it. If it does, try the flash again.
If not, go through the steps in my "Captivate Connection Issues and Download Mode Help" post that's in my signature.
okeefj09 said:
well the phone is completely bricked, before it was just repeatedly rebooting when i turned it on cause i failed to flash to the rom properly because im extremely new to the whole "phone modifying" thing and i was rushing which is not what your suppose to do cause these are very delicate processes, but now after plugging into the computer and attempting to master clear with odin when i turn it on i get the whole (cellphone Icon)..!..(computer icon) thing on my screen, i can still put it into dl mode from here with the jig i made but with my extreme noobness to this type of thing im not sure what to do still.. i dont want to mess up my phone any worse than i already have (if thats at all possible) and its just looking like i turned my phone into a paper weight at this point.
Click to expand...
Click to collapse
You're not bricked. Master clear isn't going to fix your issue, and even if you wanted to run it, it only works with the phone booted which you obviously can't do. You're still all good.
1. Breathe.
2. Right click on Odin One Click and "Run as Administrator."
3. Put phone in download mode with your jig.
4. Plug the USB cord into the back of the computer (never a hub).
5. Wait for odin to recognize the phone (box turns yellow in Odin).
6. Wait a few more seconds to make sure nothing crashes.
7. Click start. Don't touch your phone, unplug it, run any other computer programs, or generally touch anything until the flash is complete. It will say "Done" and the phone will reboot.
okay i just want to flash back to stock if i can get it connected, if you can point me into the direction of the simplest way of doing this it would be greatly appreciated, i would love to learn how to do all of this fancy rom flashing stuff but bricking my phone is too much of a risk you know?
id prolly hug you if i met you in person, i was almost positive i was screwed.
THANKK YOUU so much
okeefj09 said:
THANKK YOUU so much
Click to expand...
Click to collapse
You're welcome, glad we could help
4-2ndtwin said:
Heimdall drivers / Samsung drivers conflict with each other. Try removing the Heimdall drivers and reinstalling the Captivate drivers (don't forget to reboot ur computer). Then right click and run as administrator the Odin 1st. Then connect ur usb to the back of ur computer if u r on a desktop or 1st port if u r on a laptop. then connect ur phone in download mode and see if Odin recognizes it.
Click to expand...
Click to collapse
That's bad advice. And you have obviously never tried it.
First. You don't remove heimdall drivers. You just use the closed source Samsung installer
Second. As an open source community, with an open source system like android, recommending using Odin over heimdall is just plain wrong. Without open source you wouldn't even have an android. Open source supports open source. No one should support closed source
Third, all that is required is to use another USB port. The open source libusb drivers were made right. Samsung drivers blow away the entire system. Libusb is only installed on a single USB port. The rest still work with Odin.
AdamOutler said:
That's bad advice. And you have obviously never tried it.
First. You don't remove heimdall drivers. You just use the closed source Samsung installer
Second. As an open source community, with an open source system like android, recommending using Odin over heimdall is just plain wrong. Without open source you wouldn't even have an android. Open source supports open source. No one should support closed source
Third, all that is required is to use another USB port. The open source libusb drivers were made right. Samsung drivers blow away the entire system. Libusb is only installed on a single USB port. The rest still work with Odin.
Click to expand...
Click to collapse
Didn't know until this post...http://forum.xda-developers.com/showpost.php?p=19998299&postcount=115 that it was possible to use Odin and Heimdall without removing one or the other drivers. This was never stated in the Heimdall Thread in the Captivate Android Development Forum or the Heimdall website or the Read Me, that I have seen.
And I have even admitted that I have not tried Heimdall. -- Here... http://forum.xda-developers.com/showpost.php?p=19995597&postcount=113
And I can only recommend what I know works. Odin is what I use and I have not had any problems occur that could not be resolved. And there are stated risks with both Odin and Heimdall. It is up to the individual user to choose which he uses and to understand that if they brick their phone, that is the risk that they were willing to take.
I use (support, if u must) Odin. I am not an "Ultra Open Source" guy as you appear to be (have u never used Odin?). I will keep using Odin and maybe one day give Heimdall a try, because I am not anti-Heimdall at all. Until then I will try to give the best advice I know to help others, just as I have received help from many.
If you're ultra-android, then you need to be ultra-open-source. Open Source development is what keeps our community alive. You have the right to request the source code for every ROM created on these forums because they are based on GPLV2 software.
Of course I've used Odin... I would never recommend it to anyone because it's not safe to use for a beginner. Heimdall One-Click has 6 points of safety over Odin.
Prove to me that Odin does what it's supposed to. Prove to me that Odin does not have a bot-net installed. Prove to me that Samsung can't just flip a switch and cause a brick on any given device when it's connected to Odin. Prove to me that any Odin One-Click is what it says it is without flashing it... You can prove all of these things with Heimdall.
Here's the source tree for Heimdall One-Click, One-Click UnBrick, and Heimdall One-Click Packager http://heimdall-one-click.googlecode.com/svn/trunk/ You can inspect the code for malicious content. On top of that, a finished One-Click is in an executable JAR format. This means it can be unzipped and each file can be inspected for malicious content and/or virus scanning.
Recommending Odin is not only against the moral fabric of this community, it's also risky. I don't know of a single brick that Heimdall One-Click has caused.... However people make a full-time job out of recovering bricks caused by Odin.
Here you go.. use this: http://forum.xda-developers.com/showthread.php?t=1266172 Choose if you want rooted or non-rooted.
I looked through other similiar threads but they are for other phones so i wanted to start this thread to get unstuck with my samsung i897 with clockwork mod installed. I guess im good at learning things the hard way so here i am stuck at the mercy of you guys. this is what i figure i can do to get the update.zip i can put my sd card in a sd card reader then hook it up to my pc then manually copy update.zip to it to get access through the clockwork mod bios then point it to the freshly copied file but the prob is i dont have a usb sd card reader and i have ignorantly formatted everything on my phone so i can boot up only to the clockwork mod bios with nothing for it to work with so can any of you give me a laymens term step by step noobie style walkthru out of the kindness of your heart or pure boredom? thanks and i figue almost bricking my phone is a good way to learn this stuff So am i stuck having to get a sd card reader for my pc then download the update.zip or if there are alternatives to update.zip then id like to know but is this the only way to get me out of this situation of just having the clockwork bios and nothing else? if someone has a quickfix please let me know or point me to some solution please
Flash back to stock with ODIN that will fix your phone.... Why would u format?
Cuz i like to jump the gun before thinking alot of times thats why i learn the hard way most of the time it builds character also i learn stuff that i never wanted to learn but it helps me in the long run.
Carefull jumping the gun will land you with a hardbrick...
Ok I tried the [STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE ONLY
thread located at http://forum.xda-developers.com/showthread.php?t=731989 and i did it step by step with the mentioned drivers installed and i cant get oden to reconize my phone im in download mode followed the directions to a t with nothin :/ do you have any other ideas?
Is your phone running CyanogenMod or MIUI?
its running the \update-cm-7.1.0-Captivate-signed.zip or it says this when it boots into the custom bios clockwork mod recovery v2.5.1.0 speedmod ulfk and the bios text is in green with the reboot system now options - apply sdcard:update.zip and -wipe data/factory reset and - wipe cach partition and install zip from sdcard and - backup and restore and - mounsts and storage and advanced clockworkmod feautures and - advanced speedmod ulk features and- ********go back******* etc and their subdirectories but thats all i can get because i guess thats all left on my phone . i can get the com recognition when i boot up to recovery mode but not when i boot into download mode which is what i need to be in obviously because i cant get odin to run all the way through in recovery mode it sticks and freezes and this is what i get <ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
Then you need Nexus S drivers. I recommend you also download android SDK while your at it. FYI any AOSP (CyanogenMod, MIUI, etc) use Nexus S drivers.
Ok im trying to reinstall my driver for windows 7 nexus driver u mentioned btw my device is listed as gadget serial under devices and printers ok ive chosen 16_Shrewsbury and trying to update the gadget serial to the shrewsbury driver i keep getting select device - the folder you specified doesnt contain a compatible software driver for your device. if the folder contains a driver, make sure it is designed to work with windows for 32-bit systems and just to let you know the driver file name i downloaded is samsung_driver the one i was using before was SAMSUNG_USB_Driver_for_Mobile_Phones_x86 so it seems i have a tricky aggravating device driver problem that is what makes all this hard in the first place trying to find needle in the haystack drivers when they should be outlined correctly instead of this. but anyway im hanging int their because i have a brick with nothing else so far. thanks agian for your patience in joining in my aggravatiion.
I really can't say. I just use SDK for that. =/ I've never installed any nexus S drivers, but I assume you can grab legit drivers from nexus site.
This is what im going to try now, im going to unistall and try to seek out all the drivers and do away with them i wish there was a samsung driver eliminator program so i can go through the trial and error correct driver thing which i shouldnt be going through because i had the correct drivers before enough to root my phone in the first place this is just crazy but i consistently run across these driver issues when dealing with windows so i should just accept this i how it is and keep plugging at it till i finally have a phone again well if anyone has a miracle answer for me then feel free to relieve my anxiety and bless me with just 1 time a simple fix lol. I guess if this was simple in the first place everyone would be doing it.
When i ran MIUI, the only time i had a driver problem was with adb. Rest if the t time, Samsung drivers worked fine. You could always use heimdall, on Ubuntu (google wubi installer)
im still stuck trying to get odin3 to reconize my device in download mode so i can one click fix my phone back to factory default , the trouble im facing is that i cant seem to get the correct driver ive tried so many different ones and im fighting windows 7 because it keeps putting i9000 or nexus drivers in automaticallly when i unplug the usb and reinsert in to initiate download mode. like i said in an earlier post i wish i had a proggie that could seek out the device drivers and annihilate them so i could start from scractch as yet im trying to find them myself manually and do away with them with not much luck.
Soft Brick Fix - Samsung Captivate
Another "Jump the gunner". That's me in a nutshell.
Here are the steps you will need to take in order to un-brick your phone.
(I have done this so many times, but I have never written a tutorial)
First off, it sounds like you have the wrong drivers installed for your phone. Most computers have more than one use port, and it will attempt to install the driver for the phone for every different port you plug it into. But lets fix the one that you have that's messed up already.
-With your phone in download mode, plug it into the USB port.
-Open control panel, system, then click on device manager in the left column of the window.
-At the bottom of the list you will see "Universal Serial Bus Controllers"
-Expand this list.
-Find the device that is supposed to be resembling your phone. If you don't know the name, you may be able to check by the windows clock for the green circle with the check mark in it, clicking this will tell you what "Ejectable" USB devices are connected.
-Right click the matching device name in the Device manager screen and then click uninstall.
------------------------------------------------------------------------
-Download the correct drivers:
Samsung USB Drivers
(go here, click software, USB driver should be first listing)
-Install the driver from where you downloaded it to.
-Plug in your phone while in download mode.
-Verify that the correct driver has been installed.
------------------------------------------------------------------------
-Open your phone and remove the battery.
-Replace the battery and battery cover.
-Open any Odin one click from this thread (Recommend one with Gingerbread bootloaders)...
Odin One Clicks
-Boot phone into download mode
-Plug phone into USB (After Odin is open)
-When you see the yellow COM port lit up, flash.
That should do it!
followed your advice and im still stuck with every device driver i try it either says will not reconzie my device or that device cannot start etc. i refuse to give up so if you guys are on this journey with me thats kewl. ok instead of manually trying to install the driver i goto setup now and when i run it i get this message
Install driver - SAMSUNG Android USB Modem Software was not installed successfully (16) There is a driver installed for the device, please uninstall first.
So now im in device manager trying to find the correct driver to uninstall since its not listed under usb devices it only comes up as gadget serial under other devices. Im trying to get rid of the drivers but i seem to be stuck in a loop . i found this link http://www.techrepublic.com/blog/window-on-windows/get-rid-of-old-device-drivers-hidden-in-vista/867 so im trying the advice here and seeing if i can remove the device and add the right one man i should just reformat my hd and put in linux or unix or any os besides windows then id probably be ok.
You don't have to reformat to do Linux. It will run via a live usb drive or a side-by-side installation.
ok i used the advice from http://www.techrepublic.com/blog/window-on-windows/get-rid-of-old-device-drivers-hidden-in-vista/867 and showed hidden devices and removed all samsung drivers or anything remotely resembling samsung usb drivers including the gadget serial device and then reinstalled the supposedly correct drivers for my i897 atnt captivate or craptivate and it installed but gives me this error gadget serial control failed so now i suppose i have to find a driver that doesnt exist for a device that isnt correctly being identified by win 7 as a samsung galaxy s sgh-i897 antnt captivate. or does anyone know of a gadget serial control driver that will work so that odin3 will reconize my device so i can get some semblance of a cellphone back? no im trying the advice from http://forum.xda-developers.com/showthread.php?t=1355666 with the title [SOLVED] Gadget Serial Issue - No Flash my problem is i have the same prob but require a flash.
Have you given heimdall a try? It uses different drivers than Odin.
I didnt have to use heimdal odin3 finally reconized my phone after following my previous post option and installing previous set of drivers for my phone not the newest seems u can save a brick after all but pain in the rear but now ive learned so im
ready to hack my phone to death lol btw if anyone else has this prob feel free to ask me fer help lol and thank you very much for all the help in this wonderful forum top notch support guys with this kind of diligence there is nothing u guys cant do )
Good Luck
Hi,
This is my first thread and i have gone through a lot of threads to find if there is a solution to my problem but couldn't find any.
I have a gt-n7000, it is not rooted, running stock os, 4.1.2 .
I put it on charge last night and when i woke up the screen was on and was asking for a emergency recovery password. Since I didn't have the password and was a little confused as i had never seen that before i restarted it. Now it wont get passed the GT-N7000 logo.
I'm able to get to download screen but can't use odin as i hadn't checked USB Debugging before.
I have windows 8 computer.
when I run ODIN it shows ID:COM but in blue not yellow.
Odin says No binary is selected.
I have no prior experience in rooting or flashing custom roms.
Please Help!!
PLEASE NOTE the tab will not do a factory reset, when I try that it tells me it has successfully erased all the data but when I reboot it it still comes up with the same screens as described below
Got a new S2 8 inch from Sprint but couldn't remember my password so I never activated it ... it worked fine. Great. No activation fee, no monthly access charge, no running up excess minutes accidently.
Truth is all I ever wanted was a pure WiFi tab to replace a Nexus 9. I just bought from Sprint because they were having a sale. Without activation I had exactly the tablet I wanted.
Than I got greedy ... decided to streamline performance by tossing out all the superfluous phone apps and system stuff ... this seemed to work well to ... or at least it did before I rebooted the phone. Now I get a black screen with a flashing red message: Kernel is not SE Android enforcing. Custom binary blocked by FHP block.
All this is Greek to me, but that aside when I try to boot up I get one of two options depending on what hard key compos I hold. One is an endless download loop, the other is the standard Android mini recovery boot page. Of all the options, the seemingly easiest delete cache and restore default system doesn't work. The other potentially useful items .... update from file, update via download, etc. require an ADB connection to work. I have tried to establish an ADB connection using many different cables on both a Win 19 and a Win 7 PC ... in each case I get the dread "wouldn't open Code 10) message .... I have tried it with specific adb drivers and generic ones ... the results are always the same.
A fw other tips, the Android System Recovery LMY47x.T817PVPS2A0L1 screen says:. in yellow at the bottom of the screen, dm-verification failed ... update from ADB blocked and gives similar messages under"apply update from external storage, and and apply update from cache
Meanwhile, back at the downloading loop page we are told:
ODEN MODE
DOWNLOAD SPEED : FAST
PRODUCT NAME SM T817P
CURRENT BINARY: SAMSUNG OFFICIAL
FAP LOCK: ON
Secure Download: Enabled
Knox Warranty Void: ZERO
HP: SWHEV: B:2 K:8 S:0
So please, please, please does anyone have any idea what's going on here and how I can fix it ... would it, for example., be possible to reinstall the ROM and OS via a USB stick and OTR cable ... if so how would you do it .......
Thank you, thank you, thank you
Forgot to mention Samsung G6 phone connects to PC correctly through same cable ... Device Manager shows Code 10 message when nothing Android is connected to a USB port or when the S2 is connected does not show Code 10 and works perfectly when G6 is connected .... would it be possible to boot and restore the tablet via a USB stick and OTR cable? Thanks again
Hi, Guys, girls, men and women ... I'm not to proud to beg ... one of you must have an answer to this puzzle ... if you do and it works I'll use the my G6 to send you a video of me pushing a peanut around with my nose. Is there really no way to bot or restore this thing via a USB flash drive?
this seems like it could definitely help you
If you can boot into download mode (press volume down and home button as you power on the tablet. Continue holding the buttons down until you get the download warning message).
If successful, download the latest version of Odin to your computer. Also go to sammobile.com and search for your device in the firmware section. Download the appropriate firmware to your computer. You will also need the Samsung drivers for your device on your computer as well.
You should be able to flash it back to stock with Odin. There several threads on xda that give instructions on how to use Odin.