Database Develop

[Q] can't install t-mobile 4.4.2 with TWRP 2.6.3.1

can't install t-mobile 4.4.2 with TWRP 2.6.3.1, how can i do? where to get the stock recovery?

arsene28 said:
can't install t-mobile 4.4.2 with TWRP 2.6.3.1, how can i do? where to get the stock recovery?
Click to expand...
Click to collapse
you need the stock firmware package for your phone and when you extract it there will be a image file named recovery you need to flash it then take the OTA then reflash your custom recovery

thank you very much
dray_jr said:
you need the stock firmware package for your phone and when you extract it there will be a image file named recovery you need to flash it then take the OTA then reflash your custom recovery
Click to expand...
Click to collapse
Thank you very much! I followed your words, and upgrated success!

arsene28 said:
can't install t-mobile 4.4.2 with TWRP 2.6.3.1, how can i do? where to get the stock recovery?
Click to expand...
Click to collapse
yo, did you sign up for that forum member thing or whatever it's called in order to get the update before they roll it out to everyone??
I'm on T-Mobile too but haven't gotten the update yet.

campzalot said:
yo, did you sign up for that forum member thing or whatever it's called in order to get the update before they roll it out to everyone??
I'm on T-Mobile too but haven't gotten the update yet.
Click to expand...
Click to collapse
You should see the update very soon. I didn't sign up for anything and received it last night.

campzalot said:
yo, did you sign up for that forum member thing or whatever it's called in order to get the update before they roll it out to everyone??
I'm on T-Mobile too but haven't gotten the update yet.
Click to expand...
Click to collapse
I didn't receive the ota too, Someone shows that they received the upgrade by ota, so I download it from this forum for upgrading.
Sent from my XT1053 using xda app-developers app

campzalot said:
yo, did you sign up for that forum member thing or whatever it's called in order to get the update before they roll it out to everyone??
I'm on T-Mobile too but haven't gotten the update yet.
Click to expand...
Click to collapse
You can get from here make sure to read and your device is compatible http://androidfannetwork.com/2014/02/05/get-the-t-mobile-moto-x-android-4-4-2-kitkat-ota-here-now/
Sent from my Nexus 7 using XDA Premium 4 mobile app

arsene28 said:
Thank you very much! I followed your words, and upgrated success!
Click to expand...
Click to collapse
Could you explain the steps in some more detail? Where do i get the stock image, how to extract the recovery... Thanks!
---------- Post added at 11:59 AM ---------- Previous post was at 11:35 AM ----------
raoulteeuwen said:
Could you explain the steps in some more detail? Where do i get the stock image, how to extract the recovery... Thanks!
Click to expand...
Click to collapse
Is it: download ROM from http://sbf.droid-developers.org/phone.php?device=0 , unzip, and flash extracted recovery.img ?

raoulteeuwen said:
Could you explain the steps in some more detail? Where do i get the stock image, how to extract the recovery... Thanks!
Click to expand...
Click to collapse
here to find your match firmware and download it http://sbf.droid-developers.org/phone.php?device=0
unzip it, and you can find a file named "recovery.img", and copy it to your sdk folder. if you don't have this tool. you can from this website and install it: http://developer.android.com/sdk/index.html . copy the "recovery.img" to "D:\adt\sdk\platform-tools" folder.
after that,connect your phone, and reboot to fastboot, open ":\adt\sdk\platform-tools" in your pc, hold "shift" and click right key of mouse, then shoose "open command window here". then input "fastboot flash recovery recovery.img", and you can get your recovery back to your stock recovery.
after that, you can follow this: http://androidfannetwork.com/2014/02/05/get-the-t-mobile-moto-x-android-4-4-2-kitkat-ota-here-now/
hope you can get what you want, and apologize for my poor english, hope you can understand my answer.

Yes, just like what you said. I'm sorry i didn't see your addition reply.
Sent from my XT1053 using xda app-developers app

arsene28 said:
here to find your match firmware and download it http://sbf.droid-developers.org/phone.php?device=0
unzip it, and you can find a file named "recovery.img", and copy it to your sdk folder. if you don't have this tool. you can from this website and install it: http://developer.android.com/sdk/index.html . copy the "recovery.img" to "D:\adt\sdk\platform-tools" folder.
after that,connect your phone, and reboot to fastboot, open ":\adt\sdk\platform-tools" in your pc, hold "shift" and click right key of mouse, then shoose "open command window here". then input "fastboot flash recovery recovery.img", and you can get your recovery back to your stock recovery.
after that, you can follow this: http://androidfannetwork.com/2014/02/05/get-the-t-mobile-moto-x-android-4-4-2-kitkat-ota-here-now/
hope you can get what you want, and apologize for my poor english, hope you can understand my answer.
Click to expand...
Click to collapse
Thank you very much. Did as you describe (just before reading it, i found out you can't flash an img file through twrp, so googled and found had to do it from PC via the fastboot command ... did that, but when i now try to reboot into recovery i get the green droid and a red exclamation mark ... Haven't found out how to solve that. Right after initiating the command, the first output is "variable not supported!", but the phone did flash. I did try a second time, but get the same result. So i now can't get into a recovery and can't flash Android 4.2.2. Any suggestions ?

raoulteeuwen said:
Thank you very much. Did as you describe (just before reading it, i found out you can't flash an img file through twrp, so googled and found had to do it from PC via the fastboot command ... did that, but when i now try to reboot into recovery i get the green droid and a red exclamation mark ... Haven't found out how to solve that. Right after initiating the command, the first output is "variable not supported!", but the phone did flash. I did try a second time, but get the same result. So i now can't get into a recovery and can't flash Android 4.2.2. Any suggestions ?
Click to expand...
Click to collapse
Found it: while seeing the droid and red exclamation, i can press "Volume Down and Power" and get a menu, am flashing the 4.2.2. while i type this. Thanks!

Mine is press the up and power button. Do you success to flash 4.2.2? I heard that it can't flash down to the previouse system, may cause some trouble?
Sent from my XT1053 using xda app-developers app

if you are not 100% sure you want 4.4.2 i would not flash it because you can not flash back to 4.4.

[Q] Support Possibly Bricked (Soft-Bricked for sure)

Hi there! I have been stumped for the past 18 hours trying to fix my phone, and I decided to come to the people who actually know what they are doing. I had Cyanogenmod installed on my phone, and I wanted it gone. I have somewhat forgot the steps I have taken in between.
I am at the point where I have the following tags on my H-Boot (Version 1.56) Tampered & Re-Locked. I have TWRP installed, using sideloader always gives me a error (executing updater binary in zip). Trying to mount to sdcard, gives me a error (unable to mount /data/). Using fastboot to flash with either a recovery img or the rom gives me a error (signature verify error).
Any help is appreciated. I can Skype Screen-share and call with people, if it would speed up the process, if you would be willing to help with that, please drop me a PM with your Skype name. All and any help is appreciated. Cheers.

Unlock your bootloader at HTC Dev, that's why you cant flash recovery, and certainly wont be able to flash any ROM's with it locked.
ps. not bricked at all.

Seanie280672 said:
Unlock your bootloader at HTC Dev, that's why you cant flash recovery, and certainly wont be able to flash any ROM's with it locked.
ps. not bricked at all.
Click to expand...
Click to collapse
Unlocked my bootloader, installed TWRP, however I am back to this rather annoying 'error: device not found' I fixed it before by killing and re-starting the server, however sideload still giving me that. Any help?
Edit: Got that working, however sideload is giving me assert failed: file_getprop and Error executing updated binary in zip.

Seanie280672 said:
Unlock your bootloader at HTC Dev, that's why you cant flash recovery, and certainly wont be able to flash any ROM's with it locked.
ps. not bricked at all.
Click to expand...
Click to collapse
Casper001 said:
Unlocked my bootloader, installed TWRP, however I am back to this rather annoying 'error: device not found' I fixed it before by killing and re-starting the server, however sideload still giving me that. Any help?
Edit: Got that working, however sideload is giving me assert failed: file_getprop and Error executing updated binary in zip.
Click to expand...
Click to collapse
Update, I tried fastboot update, but I am getting does not contain android-info & product.txt. Any help?

what exactly are you trying to do and what are you trying to flash ?
Can you get into recovery ?

Seanie280672 said:
what exactly are you trying to do and what are you trying to flash ?
Can you get into recovery ?
Click to expand...
Click to collapse
I am trying to get my stock sense back. I have pushed the ROM of it onto my /data/ right now. I can access recovery. I am guessing on TWRP I just install now? However, I will wait for a reply.

Casper001 said:
I am trying to get my stock sense back. I have pushed the ROM of it onto my /data/ right now. I can access recovery. I am guessing on TWRP I just install now? However, I will wait for a reply.
Click to expand...
Click to collapse
Ok just out of interest, which rom did you push ?

Seanie280672 said:
Ok just out of interest, which rom did you push ?
Click to expand...
Click to collapse
The full name of the ZIP I downloaded was:
Code:
OTA_M7_UL_K44_SENSE55_MR_Vodafone_UK_4.19.161.11-3.63.161.6_release_356881mwn487m942rk64ep
It's the one I got told for my phone, as I am on Vodafone and it matches with my details.

That wont work, its not a zip, that's why your having problems, its the official RUU
I have a backup of the Vodafone original rom for your device, I will PM you a link, but first will you enter your recovery and backup your current rom please, the reason I ask you to do this is because by doing a backup, TWRP will automatically creat a couple of folders where you will need to put the backup I give you.

Seanie280672 said:
That wont work, its not a zip, that's why your having problems, its the official RUU
I have a backup of the Vodafone original rom for your device, I will PM you a link, but first will you enter your recovery and backup your current rom please, the reason I ask you to do this is because by doing a backup, TWRP will automatically creat a couple of folders where you will need to put the backup I give you.
Click to expand...
Click to collapse
Cheers dude. I have backed up every folder on TWRP.

unzip the file I give you and extract it somewhere where you can find it all like on your desktop.
flash the recovery included in the zip, just incase of compatibility issues, its still TWRP, just a different version.
Copy backup folder and its contents to your internal phone memory - TWRP - BACKUPS - (folder named device serial number) - place the folder with the backup here.
Enter recovery and flash it.
---------- Post added at 09:00 PM ---------- Previous post was at 08:56 PM ----------
2 mins, just uploading it to my google drive

Seanie280672 said:
unzip the file I give you and extract it somewhere where you can find it all like on your desktop.
flash the recovery included in the zip, just incase of compatibility issues, its still TWRP, just a different version.
Copy backup folder and its contents to your internal phone memory - TWRP - BACKUPS - (folder named device serial number) - place the folder with the backup here.
Enter recovery and flash it.
---------- Post added at 09:00 PM ---------- Previous post was at 08:56 PM ----------
2 mins, just uploading it to my google drive
Click to expand...
Click to collapse
Will do, cheers again mate.

PM Sent

Seanie280672 said:
PM Sent
Click to expand...
Click to collapse
Downloading right now, 8 mins left on the download, and unknown on the extraction (this old laptop can be a little iffy at times), however thank you a ton mate, and it seems fairly simple from now I'll let you know how it gets on!

help me my razr xt890 is not booting

So here is my problem , after trying to install a custom rom on my razr i i may have broken something in the system and now he isnot booting anymore , i'm stuck in the fastboot mode but not any of the options is working and it keeps telling me that my pds partition is broken ...
I'm a complete newbie and i have no idea how to fix it so please help me !

doud1998 said:
So here is my problem , after trying to install a custom rom on my razr i i may have broken something in the system and now he isnot booting anymore , i'm stuck in the fastboot mode but not any of the options is working and it keeps telling me that my pds partition is broken ...
I'm a complete newbie and i have no idea how to fix it so please help me !
Click to expand...
Click to collapse
What if u flash with fastboot the pds partition? And what is exactly the error u get?
If that doesn't work just flash with rsd-lite (latest) and your firmware (latest) and recover it. From then on u can try again.

Hazou said:
What if u flash with fastboot the pds partition? And what is exactly the error u get?
If that doesn't work just flash with rsd-lite (latest) and your firmware (latest) and recover it. From then on u can try again.
Click to expand...
Click to collapse
thanks for responding fast . I'll try that but how can i flash the pds partition and where can i find this partition? As well where can i find the firmware for my phone?
thanks very much for helping me

doud1998 said:
thanks for responding fast . I'll try that but how can i flash the pds partition and where can i find this partition? As well where can i find the firmware for my phone?
thanks very much for helping me
Click to expand...
Click to collapse
See my signature
I assume you have a working adb and fastboot, otherwise u couldn't have installed the recovery.
Your firmware can be found under section E.
When you have downloaded your fimware (always 4.1.2). Extract it and flash the pds_signed or pds.bin. Something with pds.
This can be done by moving the pds* to the directory with the fastboot executable. Then boot into ap fastboot mode and check if your device is recognized by using "fastboot devices". If yes, do the following command to flash the pds partition "fastboot flash pds (pds-file)"
If it doesn't work, post the results. Not only that is says an error, but post the error string.

Hazou said:
See my signature
I assume you have a working adb and fastboot, otherwise u couldn't have installed the recovery.
Your firmware can be found under section E.
When you have downloaded your fimware (always 4.1.2). Extract it and flash the pds_signed or pds.bin. Something with pds.
This can be done by moving the pds* to the directory with the fastboot executable. Then boot into ap fastboot mode and check if your device is recognized by using "fastboot devices". If yes, do the following command to flash the pds partition "fastboot flash pds (pds-file)"
If it doesn't work, post the results. Not only that is says an error, but post the error string.
Click to expand...
Click to collapse
I'm really sorry to annoy you for that but i don't get what you mean by "section E"

doud1998 said:
I'm really sorry to annoy you for that but i don't get what you mean by "section E"
Click to expand...
Click to collapse
I meant, in my signature under my post u can find within the link INDEX/GUIDE, ALL Things RAZR I under paragraph/ section E a link to all the firmwares available for the Razr I.
But in this case i will post the full link to the firmware site, here.

I've download the zip but there is no pds file and i don't know how to use rsd (or is it anormal that the phone reference appear nowhere?!)

i tried to flash recovery_signed but i have the error
Checking fs on partition pds...
E:can't repaire partition pds
E:failed to mount PDS partition

doud1998 said:
I've download the zip but there is no pds file and i don't know how to use rsd (or is it anormal that the phone reference appear nowhere?!)
Click to expand...
Click to collapse
I looked a bit further into your problem, u may have this problem: this
So what we now are going to do is the following.
First can u enter recovery? and if i can, do u have a nandroid backup. If yes, restore it and just boot up the phone.
If u don't have the above. (all can be found with a bit of searching in the link in my signature)
1. Install RSD-Lite 6.1.x
2. Install the USB drivers for the phone
3. U already downloaded the right firmware (latest and the one from your region)
4. Boot in AP Fastboot and connect phone to USB port PC
5. In RSD-Lite u won't see your device. It doesn't have a system installed.
6. In RSD-Lite search in the above bar for the firmware zip file.
7. Click on flash or something. (there is a RSD-Lite tutorial in my signature in my post)
8. See what happens
9. Report back

Hazou said:
I looked a bit further into your problem, u may have this problem: this
So what we now are going to do is the following.
First can u enter recovery? and if i can, do u have a nandroid backup. If yes, restore it and just boot up the phone.
If u don't have the above. (all can be found with a bit of searching in the link in my signature)
1. Install RSD-Lite 6.1.x
2. Install the USB drivers for the phone
3. U already downloaded the right firmware (latest and the one from your region)
4. Boot in AP Fastboot and connect phone to USB port PC
5. In RSD-Lite u won't see your device. It doesn't have a system installed.
6. In RSD-Lite search in the above bar for the firmware zip file.
7. Click on flash or something. (there is a RSD-Lite tutorial in my signature in my post)
8. See what happens
9. Report back
Click to expand...
Click to collapse
when i run rsd i can select the firmware xml but the commands 'start', 'show devices', or 'decompress and flash' are disabled (nothing happen)

+> i don't have any backup and i can't go to recovery , when it turns on it automaticly stuck to the ap fastboot menu

doud1998 said:
when i run rsd i can select the firmware xml but the commands 'start', 'show devices', or 'decompress and flash' are disabled (nothing happen)
Click to expand...
Click to collapse
Are you sure you installed drivers? RSD Lite should show Fastboot smi S as connected.
If you have installed drivers, and nothing is being detected, then you might want to prepare for several hours of headaches and lots of swearing.
You might have a chance doing this:
You will need to flash a custom recovery. If you can get CWM or TWRP working, you might have a chance to flash a zip.
i.e.
Code:
fastboot flash recovery recovery.img
Since your PDS is damaged, Omar's MotoJB ROM will probably not work, so you will need to flash a clean, stock ROM.
The only stock ROMs I've found (that can be flashed with custom recovery) are:
deodexed Retail Great Britain ICS ROM
odexed Retail Great Britain ICS ROM
Note that going back to ICS using this zip file will not brick your device (at least it didn't for my phone) unless you do it with RSD Lite.
But please don't hold me responsible if it makes things worse for you.
If you manage to flash this and it works, you can then try the PDS fix.
Good luck... :good:

waj3k said:
Are you sure you installed drivers? RSD Lite should show Fastboot smi S as connected.
If you have installed drivers, and nothing is being detected, then you might want to prepare for several hours of headaches and lots of swearing.
You might have a chance doing this:
You will need to flash a custom recovery. If you can get CWM or TWRP working, you might have a chance to flash a zip.
i.e.
Code:
fastboot flash recovery recovery.img
Since your PDS is damaged, Omar's MotoJB ROM will probably not work, so you will need to flash a clean, stock ROM.
The only stock ROMs I've found (that can be flashed with custom recovery) are:
deodexed Retail Great Britain ICS ROM
odexed Retail Great Britain ICS ROM
Note that going back to ICS using this zip file will not brick your device (at least it didn't for my phone) unless you do it with RSD Lite.
But please don't hold me responsible if it makes things worse for you.
If you manage to flash this and it works, you can then try the PDS fix.
Good luck... :good:
Click to expand...
Click to collapse
thanks for your responce but the threads for these roms have deadlink so i can't download the files....Any idea where i could find them?

doud1998 said:
thanks for your responce but the threads for these roms have deadlink so i can't download the files....Any idea where i could find them?
Click to expand...
Click to collapse
I know, I just uploaded Deodexed Retail Great Britain ICS:
Here you go. There should be a download icon at the top.

give me the right access (i'm [email protected])

Sorry, forgot to set it to public, should be fixed now.

so now i have to flash the boot.img or what? i'm not really sure what to do with this zip

You need to flash custom recovery and then you can install a zip.
Here is a tutorial on how to use recovery, if you're unsure.

i can't make works neither cwm nor twrp

doud1998 said:
So here is my problem, after trying to install a custom rom on my razr i, i may have broken something in the system
Click to expand...
Click to collapse
may i ask you what u have exactly done to install your "custom rom"?
1. Bootloader unlocked?
2. Custom Recovery installed?
3. How did you installed your rom?
4. Which custom rom?

Unable to find storage partition to mount, TWRP, after BL unlock

Heyo all,
After the bootloader unlock that was just released I tried following these instructions to revert to stock 4.4.2. I was almost there until I started flashing the system.img. I did it twice after the first time took well over 30min+ just sitting there writing. I restarted the bootloader and fastboot and tried again. No luck.
Now after getting into TWRP, I am unable to mount the device or have adb see the device. I get the error: 'unable to find storage partition to mount to usb'.
How should I go about fixing this?

What was on your device before this?
---------- Post added at 09:55 PM ---------- Previous post was at 09:53 PM ----------
Also, questions should go in the Q&A section. I asked for it to be moved for you. ?

Verttex said:
Heyo all,
After the bootloader unlock that was just released I tried following these instructions to revert to stock 4.4.2. I was almost there until I started flashing the system.img. I did it twice after the first time took well over 30min+ just sitting there writing. I restarted the bootloader and fastboot and tried again. No luck.
Now after getting into TWRP, I am unable to mount the device or have adb see the device. I get the error: 'unable to find storage partition to mount to usb'.
How should I go about fixing this?
Click to expand...
Click to collapse
Tell me that you used "Mfastboot" to flash system.img. You can not use regular fastboot to flash system.img....

KJ said:
What was on your device before this?
---------- Post added at 09:55 PM ---------- Previous post was at 09:53 PM ----------
Also, questions should go in the Q&A section. I asked for it to be moved for you. ?
Click to expand...
Click to collapse
The same firmware. I just wanted to refresh the device.
samwathegreat said:
Tell me that you used "Mfastboot" to flash system.img. You can not use regular fastboot to flash system.img....
Click to expand...
Click to collapse
I did. I followed the instructions in The Complete Moto guide for reverting to stock.

And, what was on the device before trying this?

KJ said:
And, what was on the device before trying this?
Click to expand...
Click to collapse
4.4.2. All I was doing was factory refreshing the device by reflashing 4.4.2 again.

You could try Rsdlite. ?

KJ said:
You could try Rsdlite. ?
Click to expand...
Click to collapse
If I get can get a ROM onto the device, I think I can flash it. I can get into the bootloader, I have tried using both CWM and TWRP.
I just can't mount the SD card. I think if I can get ADB to work, then I can do it.
The only problem is that adb won't see my device. I hear it beeping when I plug it in but when I type 'adb devices' it doesn't show anything.

Verttex said:
If I get can get a ROM onto the device, I think I can flash it. I can get into the bootloader, I have tried using both CWM and TWRP.
I just can't mount the SD card. I think if I can get ADB to work, then I can do it.
The only problem is that adb won't see my device. I hear it beeping when I plug it in but when I type 'adb devices' it doesn't show anything.
Click to expand...
Click to collapse
Alright I got ADB to see the device in recovery. I can't get it to mount but I am now sideloading a rom. Let's see if that works.

Verttex said:
If I get can get a ROM onto the device, I think I can flash it. I can get into the bootloader, I have tried using both CWM and TWRP.
I just can't mount the SD card. I think if I can get ADB to work, then I can do it.
The only problem is that adb won't see my device. I hear it beeping when I plug it in but when I type 'adb devices' it doesn't show anything.
Click to expand...
Click to collapse
...adb doesn't work in the bootloader. Only booted into android w/USB debugging enabled.
Check the md5 of the SBF file you are trying to flash.... If necessary, re-download it.
I also agree with @KJ that trying RSD Lite is a good idea.

samwathegreat said:
...adb doesn't work in the bootloader. Only booted into android w/USB debugging enabled.
Check the md5 of the SBF file you are trying to flash.... If necessary, re-download it.
I also agree with @KJ that trying RSD Lite is a good idea.
Click to expand...
Click to collapse
No, but ADB works in CWM and TWRP.

Verttex said:
No, but ADB works in CWM and TWRP.
Click to expand...
Click to collapse
Replying to myself for the 3rd time. I fixed it. I am now running @iKrYpToNiTe 's ROM and loving it!

Verttex said:
Replying to myself for the 3rd time. I fixed it. I am now running @iKrYpToNiTe 's ROM and loving it!
Click to expand...
Click to collapse
Congrats!

Verttex said:
Replying to myself for the 3rd time. I fixed it. I am now running @iKrYpToNiTe 's ROM and loving it!
Click to expand...
Click to collapse
Good choice, best ROM I've found mixed with xposed/gravity box. Word of advice make a nice fresh backup so you can always get back to what you have now, even save the backup file to your hard drive so you'll always have it if your phone gets wiped.

i am having same issue ,how dod you solve?
Verttex said:
Heyo all,
After the bootloader unlock that was just released I tried following these instructions to revert to stock 4.4.2. I was almost there until I started flashing the system.img. I did it twice after the first time took well over 30min+ just sitting there writing. I restarted the bootloader and fastboot and tried again. No luck.
Now after getting into TWRP, I am unable to mount the device or have adb see the device. I get the error: 'unable to find storage partition to mount to usb'.
How should I go about fixing this?
Click to expand...
Click to collapse
My device is in same condition. How to solve it?

New update released with version v1.07 (177.9MB)

Folks,
I have an update from Nubia for 177.9MB with version 1.07 downloaded (OTA) and ready to be installed..
My phone is rooted with steps from xda thread... Not sure if the update will break my phone...
Anyone has any info on this? Please advise
Aru

You can do two things with the same result:
1. Flash the ROM version you have in the recovery and you will be able to update via OTA without any difficult.
2. If you have the stock boot.img of the version of your ROM, just flash it via ADB and fastboot on the fastboot menu and you will able too to flash the update via OTA
I have a question to you. Which ROM are you using?

Perseo99 said:
You can do two things with the same result:
1. Flash the ROM version you have in the recovery and you will be able to update via OTA without any difficult.
2. If you have the stock boot.img of the version of your ROM, just flash it via ADB and fastboot on the fastboot menu and you will able too to flash the update via OTA
I have a question to you. Which ROM are you using?
Click to expand...
Click to collapse
Thanks for your reply and apologies for the delay in my response..
I am currently running on V1.04 and I got the update via OTA... and I am not on stock boot.img and have installed Magisk...
So are you suggesting that I could get the update installed? Will that work fine?
Sorry that I am skeptical to perform this upgrade and hence the question again..
Aru

Does this update fix the right trigger glitch in Nubia???

Perseo99 said:
You can do two things with the same result:
1. Flash the ROM version you have in the recovery and you will be able to update via OTA without any difficult.
2. If you have the stock boot.img of the version of your ROM, just flash it via ADB and fastboot on the fastboot menu and you will able too to flash the update via OTA
I have a question to you. Which ROM are you using?
Click to expand...
Click to collapse
I started the update... But upon restart, stuck in boot screen... Nothing happens after that...
Any help would be appreciated...
Aru

Can't get into Recovery Mode... Tried the Unbrick tool from Jerry, but got the below error message..
Download port number=3
Downloading firehose programmer...
[Error]: Download programer FAIL.Please check phone status and reset into edl mo
de and try again.
Software download FAIL.Press any key exit
Any help would be appreciated...
Aru

B01070 said:
I started the update... But upon restart, stuck in boot screen... Nothing happens after that...
Any help would be appreciated...
Aru
Click to expand...
Click to collapse
Try enter in recovery mode and clear data and cache, then boot again. Did you do what I said to you about the boot.img?
---------- Post added at 12:57 PM ---------- Previous post was at 12:54 PM ----------
B01070 said:
Can't get into Recovery Mode... Tried the Unbrick tool from Jerry, but got the below error message..
Download port number=3
Downloading firehose programmer...
[Error]: Download programer FAIL.Please check phone status and reset into edl mo
de and try again.
Software download FAIL.Press any key exit
Any help would be appreciated...
Aru
Click to expand...
Click to collapse
Sometimes I get the same error and when I try again it works. Make sure you are in EDLMODE and that the port you typed is the correct. To see that you have to enter in devices manager on win10 and see in "Com Ports"

Perseo99 said:
Try enter in recovery mode and clear data and cache, then boot again. Did you do what I said to you about the boot.img?
---------- Post added at 12:57 PM ---------- Previous post was at 12:54 PM ----------
Sometimes I get the same error and when I try again it works. Make sure you are in EDLMODE and that the port you typed is the correct. To see that you have to enter in devices manager on win10 and see in "Com Ports"
Click to expand...
Click to collapse
Thanks Perseo... Both the options didnt work for me... I was not able to get into Recovery and I was not able to successfully run Unbrick tool...
However since the phone was on fastboot mode, I was able to replace the recovery.img with stock and was successfully able to start the phone.. However it threw an error that the update was not installed which is fine...
Finally, I lost root because of this and which is also fine.. I hardly require root..
thanks again for your response..
Aru