Related
My phone is ...
- unlocked through HTC
- flash the recovery
- rooted
- HBOOT 2.0 / 2.3.5
As I cannot install the OTA successfully, I tried ...
- flash the recovery (come with the OTA file) <- still cannot install OTA
- relock the phone by using command (fastboot oem lock) <- still cannot install OTA
As I am new to this, anythings I can do to solve this Please let me know. Much thanks!
keithkei said:
My phone is ...
- unlocked through HTC
- flash the recovery
- rooted
- HBOOT 2.0 / 2.3.5
As I cannot install the OTA successfully, I tried ...
- flash the recovery (come with the OTA file) <- still cannot install OTA
- relock the phone by using command (fastboot oem lock) <- still cannot install OTA
As I am new to this, anythings I can do to solve this Please let me know. Much thanks!
Click to expand...
Click to collapse
What error message do you get when you attempt to install the OTA? How are you trying to install it?
tpbklake said:
What error message do you get when you attempt to install the OTA? How are you trying to install it?
Click to expand...
Click to collapse
I just try through normal way... download finished and click install
the phone reboot and install in progress...
after 1/3 of the progress bar
it become a phone logo together with a exclamation mark and stuck there...
keithkei said:
I just try through normal way... download finished and click install
the phone reboot and install in progress...
after 1/3 of the progress bar
it become a phone logo together with a exclamation mark and stuck there...
Click to expand...
Click to collapse
What is the version number of the OTA? What is the version of the ROM do you currently have installed?
tpbklake said:
What is the version number of the OTA? What is the version of the ROM do you currently have installed?
Click to expand...
Click to collapse
I didt flash any ROM before,
so its come with HTC which is now 3.09.708.2
and the OTA update is 3.11.708.2
btw, I can remember when flashing the recovery, there is a file stating some info of the phone, I wonder if that file have something wrong and cause this
Thanks!
keithkei said:
I didt flash any ROM before,
so its come with HTC which is now 3.09.708.2
and the OTA update is 3.11.708.2
btw, I can remember when flashing the recovery, there is a file stating some info of the phone, I wonder if that file have something wrong and cause this
Thanks!
Click to expand...
Click to collapse
How do you flash the stock recovery back and where did the recovery image come from?
tpbklake said:
How do you flash the stock recovery back and where did the recovery image come from?
Click to expand...
Click to collapse
I guess I had
The recovery image came from the 3.11 OTA package
I replaced the "recovery.xxx" file in the PXx32Xx.ZIP(cant rmb the name) with the one extracted from 3.11 OTA
keithkei said:
I guess I had
The recovery image came from the 3.11 OTA package
I replaced the "recovery.xxx" file in the PXx32Xx.ZIP(cant rmb the name) with the one extracted from 3.11 OTA
Click to expand...
Click to collapse
Ok, so you modified a PG32IMG.zip file and replaced the recovery.img file right?
Then you copied that file to our SD card and booted into HBOOT and that ran OK?
Where did the PG32IMG.zip file come from originally and what recovery image was in it?
I think you need to download the 3.09.708.2 RUU and use the recovery image from the ROM.zip file. You will need to unlock your bootloader again and then I would try flashing the recovery.img directly in FASTBOOT USB mode using the command
fastboot flash recovery recovery.img
Then relock the bootloader and try installing the OTA again.
tpbklake said:
Ok, so you modified a PG32IMG.zip file and replaced the recovery.img file right?
Then you copied that file to our SD card and booted into HBOOT and that ran OK?
Where did the PG32IMG.zip file come from originally and what recovery image was in it?
I think you need to download the 3.09.708.2 RUU and use the recovery image from the ROM.zip file. You will need to unlock your bootloader again and then I would try flashing the recovery.img directly in FASTBOOT USB mode using the command
fastboot flash recovery recovery.img
Then relock the bootloader and try installing the OTA again.
Click to expand...
Click to collapse
Oooo, let me try it
for unlocking the bootloader
can it be done using command now? or I hv to unlock through HTC again?
Thanks for the great help!
keithkei said:
My phone is ...
- unlocked through HTC
- flash the recovery
- rooted
- HBOOT 2.0 / 2.3.5
As I cannot install the OTA successfully, I tried ...
- flash the recovery (come with the OTA file) <- still cannot install OTA
- relock the phone by using command (fastboot oem lock) <- still cannot install OTA
As I am new to this, anythings I can do to solve this Please let me know. Much thanks!
Click to expand...
Click to collapse
Another thought. While you were rooted, did you delete any apps from the ROM? If so that is another reason why the OTA would show progress and then just stop.
If extracting the recovery.img from the RUU doesn't work, you will have to reinstall the RUU to go back to a complete stock ROM and then the OTA will install,
---------- Post added at 09:43 PM ---------- Previous post was at 09:41 PM ----------
keithkei said:
Oooo, let me try it
for unlocking the bootloader
can it be done using command now? or I hv to unlock through HTC again?
Thanks for the great help!
Click to expand...
Click to collapse
If you still have the unlock bin file, you can use it again.
tpbklake said:
Another thought. While you were rooted, did you delete any apps from the ROM? If so that is another reason why the OTA would show progress and then just stop.
If extracting the recovery.img from the RUU doesn't work, you will have to reinstall the RUU to go back to a complete stock ROM and then the OTA will install,
---------- Post added at 09:43 PM ---------- Previous post was at 09:41 PM ----------
If you still have the unlock bin file, you can use it again.
Click to expand...
Click to collapse
Luckily I didn't remove any apps from the ROM (I tried but I cannot, weird)...
hope that I don't need to reinstall the RUU
Thanks!
Where did you buy your phone? You should run proper RUU (according to phone's region) then you'll be stock and able to receive any OTA you might be prompted.
Sent from my Incredible S using XDA
thiagofbrito said:
Where did you buy your phone? You should run proper RUU (according to phone's region) then you'll be stock and able to receive any OTA you might be prompted.
Sent from my Incredible S using XDA
Click to expand...
Click to collapse
i bought it from my service provider and didn't flash any other ROM before, only the recovery, so I think its ok?
You gonna need stock recovery to be able to receive OTA. So you better saying which country is it of your service provider to get proper stock recovery from RUU.
Sent from my Incredible S using XDA
thiagofbrito said:
You gonna need stock recovery to be able to receive OTA. So you better saying which country is it of your service provider to get proper stock recovery from RUU.
Sent from my Incredible S using XDA
Click to expand...
Click to collapse
He already has that information and there is an RUU available for his region. He is good to go.
tpbklake said:
He already has that information and there is an RUU available for his region. He is good to go.
Click to expand...
Click to collapse
I guess the version number did tell the region? i.e. HK
I don't hv time to try these days, maybe weekend
Thanks to tpbklake
Thanks to thiagofbrito as well
after unlock+flash stock recovery+relock
I still cannot update for the last package...
seems I have to reinstall the RUU again...
searching the web now...
after running RUU
i finally can upgrade to 3.11.708.2....
now is just waiting for 4.0.4!!!
still no OTA in hk /sosad
So I need help from everybady please becouse i try to solve it but its stile
aburenad said:
So I need help from everybady please becouse i try to solve it but its stile
Click to expand...
Click to collapse
i had this yesterday after unlocking bootloader. for me pressing the power button for about 30 seconds fixed the problem.
Did you try to enter in recovery?
However, longpress power button
b3ndech0 said:
i had this yesterday after unlocking bootloader. for me pressing the power button for about 30 seconds fixed the problem.
Click to expand...
Click to collapse
I Try but its stil
You can try to longpress vol+ for enter in stock recovery if you will enter in recovery.
but i think you've resolved.
Guich said:
You can try to longpress vol+ for enter in stock recovery if you will enter in recovery.
but i think you've resolved.
Click to expand...
Click to collapse
I tried but still the problem
aburenad said:
So I need help from everybady please becouse i try to solve it but its stile
Click to expand...
Click to collapse
Did you install custom recovery to phone?
dadrocker said:
Did you install custom recovery to phone?
Click to expand...
Click to collapse
Yes, several times
If you are trying to install a custom rom try All in one toolkit... If you want to return to stock try http://forum.xda-developers.com/showthread.php?t=2224752&highlight=stock+rom
http://forum.xda-developers.com/showthread.php?t=2183942&highlight=all+in+one+toolkit
dadrocker said:
If you are trying to install a custom rom try All in one toolkit... If you want to return to stock try http://forum.xda-developers.com/showthread.php?t=2224752&highlight=stock+rom
http://forum.xda-developers.com/showthread.php?t=2183942&highlight=all+in+one+toolkit
Click to expand...
Click to collapse
Yes, I try to go back to the original, but I can not my device information in attach
Download Stock Rom exe from this thread. And run the application. That will guide you to install the stock rom.I thin this will solve your problem. RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
http://forum.xda-developers.com/showthread.php?p=39588860
Hi. I dont mean to hijack the thread but I thought it would be better than starting a new thread with the same problem. I just got my One today and started going through the process of installing a custom rom. I unlocked the bootloader, installed a custom recovery and root and everything went fine. When I went to install Revolution 9.2 I went through the aroma installer and everything said it went OK but I'm now in a boot loop.
I installed the toolkit and using that I was able to flash different recoveries, including the stock recovery, but while I can see a different recovery screen flash, it then still boot loops. I can get into Fastboot, but not recovery. I'm downloading a stock rom exe as suggested, but didnt know which one to select. Im downloading an Asia one since im in NZ and thats the closest. is it possible to flash back to stock by fastboot? Im wondering if my partition got porked during the rom flash.
Any ideas?
kane274 said:
Hi. I dont mean to hijack the thread but I thought it would be better than starting a new thread with the same problem. I just got my One today and started going through the process of installing a custom rom. I unlocked the bootloader, installed a custom recovery and root and everything went fine. When I went to install Revolution 9.2 I went through the aroma installer and everything said it went OK but I'm now in a boot loop.
I installed the toolkit and using that I was able to flash different recoveries, including the stock recovery, but while I can see a different recovery screen flash, it then still boot loops. I can get into Fastboot, but not recovery. I'm downloading a stock rom exe as suggested, but didnt know which one to select. Im downloading an Asia one since im in NZ and thats the closest. is it possible to flash back to stock by fastboot? Im wondering if my partition got porked during the rom flash.
Any ideas?
Click to expand...
Click to collapse
If you can get into fastboot you can return to the stock rom. or you can install ARHD 9.2 again.
---------- Post added at 12:19 PM ---------- Previous post was at 12:16 PM ----------
By the way don't forget the erase the cache. Fastboot erase cache
dadrocker said:
If you can get into fastboot you can return to the stock rom. or you can install ARHD 9.2 again.
---------- Post added at 12:19 PM ---------- Previous post was at 12:16 PM ----------
By the way don't forget the erase the cache. Fastboot erase cache
Click to expand...
Click to collapse
OK, I'm sorry to ask silly questions. if I have the ARHD 9.2 Zip, what commands in Fastboot to install the Zip?
And thanks for the erase cache option
kane274 said:
OK, I'm sorry to ask silly questions. if I have the ARHD 9.2 Zip, what commands in Fastboot to install the Zip?
And thanks for the erase cache option
Click to expand...
Click to collapse
If you installed All In One Toolkit You can install that rom by using SIDELOAD installation.
dadrocker said:
If you installed All In One Toolkit You can install that rom by using SIDELOAD installation.
Click to expand...
Click to collapse
Thanks, will give that a try
But before you must find a way to stop the boot loop and enter to the recovery.
There is a boot.img in the ARHD zip file. Extract that file and by using "fastboot flash boot boot.img" command install to the phone.
After that erase the cache again. And Install any custom recovery. Try installing rom by AIO Toolkit SIDELOAD option.
dadrocker said:
But before you must find a way to stop the boot loop and enter to the recovery.
There is a boot.img in the ARHD zip file. Extract that file and by using "fastboot flash boot boot.img" command install to the phone.
After that erase the cache again. And Install any custom recovery. Try installing rom by AIO Toolkit SIDELOAD option.
Click to expand...
Click to collapse
Thanks man. I just tried side loading and realised I needed to get into recovery to do that. Fingers crossed
---------- Post added at 09:47 PM ---------- Previous post was at 09:43 PM ----------
dadrocker said:
But before you must find a way to stop the boot loop and enter to the recovery.
There is a boot.img in the ARHD zip file. Extract that file and by using "fastboot flash boot boot.img" command install to the phone.
After that erase the cache again. And Install any custom recovery. Try installing rom by AIO Toolkit SIDELOAD option.
Click to expand...
Click to collapse
Yay, thanks very much. Just managed to boot into TWRP :good:
Thanks for everybady i solve it
aburenad said:
Thanks for everybady i solve it
Click to expand...
Click to collapse
I'm glad
Thanks for sharing your thread, I managed to solve mine too with the help here.
Anyone know why fingerprint sensor isn't working after i flash recovery of b145?
Same
I bricked my Mate S so extracted the img files from the stock B145 Europe full file, and flashed:
boot
recovery
system
cache
userdata
I have the same problem, fingerprint sensor doent work, there are no options in settings for the fingerprint sensor.
Also im unable to set any security, and also i cant uninstall any apps as the phone reboots everytime i do..
I did root the phone to see what was going on and the keystore is missing along with a whole bunch of errors.
I know it doesnt help, sorry
Arola1982 said:
I bricked my Mate S so extracted the img files from the stock B145 Europe full file, and flashed:
boot
recovery
system
cache
userdata
I have the same problem, fingerprint sensor doent work, there are no options in settings for the fingerprint sensor.
Also im unable to set any security, and also i cant uninstall any apps as the phone reboots everytime i do..
I did root the phone to see what was going on and the keystore is missing along with a whole bunch of errors.
I know it doesnt help, sorry
Click to expand...
Click to collapse
If you are both talking about flashing those files whilst on B303 or B321 it's just not possible at the moment..you'll need to restore a TWRP backup u made whilst on MM Beta to get security options back.
You just can't get back to 5.1.1 from MM Beta at the moment
Okay so ive tried to manually update. Won't work. Should i try to flash the images of b321 mabye?
Basicly stupid me doesn't have backup :/
Sent from my HUAWEI CRR-L09 using XDA-Developers mobile app
The same happened to me - semi-bricked my phone whilst I was on b321; wanted to root it and it didn't work. Now I'm back on b145 because I have no TWRP backup of b321 (stupid me). So, could anyone make a (clean) TWRP backup of CRR-L09C432B321? That would be awesome!
Thanks in advance - fbs
ask to dcunlocker in the support chat...huaweiphonewriterv4.exe to flash recovery update in fastboot mode and then reflash full firmware with same tool..i have save my device.
frisko76 said:
ask to dcunlocker in the support chat...huaweiphonewriterv4.exe to flash recovery update in fastboot mode and then reflash full firmware with same tool..i have save my device.
Click to expand...
Click to collapse
Well, my phone is not bricked. It's just a really dirty version of b145 (security options and automatic screen brightness and stuff like that is not working). But thanks, I will try it
edit: where can I find the support chat? Here on XDA? Sorry for this dumb question :S
edit: where can I find the support chat? Here on XDA? Sorry for this dumb question :S[/QUOTE]
On web site of dcunlocker in the tab contact live chat..describe your problem in the tecnichal support..
---------- Post added at 03:40 PM ---------- Previous post was at 03:34 PM ----------
You not have stock recovery..you have twrp and not is possible flash original firmware....is possible to flash boot.img and recovery.img on the fastboot mode,but if you have frp lock this is not possible...only with tool of dcunlocker is possible to install recovery and boot original..after your install full firmware with same tool..
On web site of dcunlocker in the tab contact live chat..describe your problem in the tecnichal support..
Click to expand...
Click to collapse
Hi Frisko76
I have try to contact support DCunlocker chat , but there is nobody to help me today.
Can you send me a link for download huaweiphonewriterv4.exe?
frisko76 said:
edit: where can I find the support chat? Here on XDA? Sorry for this dumb question :S
On web site of dcunlocker in the tab contact live chat..describe your problem in the tecnichal support..
---------- Post added at 03:40 PM ---------- Previous post was at 03:34 PM ----------
You not have stock recovery..you have twrp and not is possible flash original firmware....is possible to flash boot.img and recovery.img on the fastboot mode,but if you have frp lock this is not possible...only with tool of dcunlocker is possible to install recovery and boot original..after your install full firmware with same tool..
Click to expand...
Click to collapse
Thanks for the input, but I guess this is not my problem. I'm able to flash via fastboot and my FRP is unlocked.
I tried flashing the files from all versions - b145, b303 and b321 (eg. system.img, recovery.img, cush.img and such), but I couldn't get b303 or b321 working again. I end everytime in a boot loop.
Maybe I did something wrong, but that's the reason I restored an old b145 twrp backup.
fbsfelony said:
Thanks for the input, but I guess this is not my problem. I'm able to flash via fastboot and my FRP is unlocked.
I tried flashing the files from all versions - b145, b303 and b321 (eg. system.img, recovery.img, cush.img and such), but I couldn't get b303 or b321 working again. I end everytime in a boot loop.
Maybe I did something wrong, but that's the reason I restored an old b145 twrp backup.
Click to expand...
Click to collapse
Have you tried factory reset then putting a full version of B145 in the /dload/ folder and doing a update through the settings..update..local update
Yes..after you have flashed the file via fastboot write command fastboot reboot..put the full firmware in the folder of dload of internal sd card....press with usb connect of your pc volume up + power and enter in huawei erecovery..press shutdown....disconnect usb...press volume +,volume- and power and release only power after huawei logo..you enter in the upgrade firmware...if flashing block at 90℅ for several minute flashing not is correct..and you need this tool huaweiphonewriterv4 with usb connect to pc for flashing full firmware without error...you have need after flashing via fastboot recovery and boot the wipe data factory reset...try before with wipe data e factory reset in the recovery ..enter in this mode without usb press volume up + power..
---------- Post added at 07:29 AM ---------- Previous post was at 07:23 AM ----------
Check control in device manager of pc..in fastboot mode you have displayed in the samsung android interface driver driver name ADB BOOTLOADER INTERFACE..IS CORRECT DRIVER..in recovery you have driver ANDROID ADB INTERFACE...check the driver correct..is very important for this...not is displayed ANDROID SOONER SINGLE ANDROID INTERFACE..not work correct this driver...check you.
brumgav said:
Have you tried factory reset then putting a full version of B145 in the /dload/ folder and doing a update through the settings..update..local update
Click to expand...
Click to collapse
I tried that, yes. But with no luck; through the settings I can't make a factory reset (it fails after a few seconds), same with the stock recovery. I haven't tried it with TWRP yet, maybe this will work.
And also the method with the dload folder fails - no matter if I do it via the phones settings or when I boot directly into the setup with volume-down and volume-up (where it stops at 90%).
Maybe a full version of b303 or b321 would work, but for now we don't have that yet.
frisko76 said:
Yes..after you have flashed the file via fastboot write command fastboot reboot..put the full firmware in the folder of dload of internal sd card....press with usb connect of your pc volume up + power and enter in huawei erecovery..press shutdown....disconnect usb...press volume +,volume- and power and release only power after huawei logo..you enter in the upgrade firmware...if flashing block at 90℅ for several minute flashing not is correct..and you need this tool huaweiphonewriterv4 with usb connect to pc for flashing full firmware without error...you have need after flashing via fastboot recovery and boot the wipe data factory reset...try before with wipe data e factory reset in the recovery ..enter in this mode without usb press volume up + power..
---------- Post added at 07:29 AM ---------- Previous post was at 07:23 AM ----------
Check control in device manager of pc..in fastboot mode you have displayed in the samsung android interface driver driver name ADB BOOTLOADER INTERFACE..IS CORRECT DRIVER..in recovery you have driver ANDROID ADB INTERFACE...check the driver correct..is very important for this...not is displayed ANDROID SOONER SINGLE ANDROID INTERFACE..not work correct this driver...check you.
Click to expand...
Click to collapse
I guess that's somehow the case - As mentioned above, I already tried to upgrade the firmware with volume-up and volume-down, but it stops at 90%. But I will try it again in the order you said, thanks!
My drivers are all fine, working with them for a while now with a lot of phones and never had problems using fastboot or adb commands (I'm using the ones of the android-sdk) - but you're right, in fastboot it is called "Android Sooner Single ADB Interface". In stock recovery my phone isn't displayed in the device manager of my computer. When I boot up normally with USB-Debugging enabled it is called "Android Adapter ADB Interface".
Honestly I'm a bit concerned about using the said software "huaweiphonewriterv4" - it doesn't seem very
reliable to me
With tool of dcunlocker i have save my device...android sooner single adb interface is not correct driver in fastboot mode...right key mouse in the pc driver device manager,update driver,manually search and toggle compatible driver..list of driver is down of samsung driver..driver correct is adb bootloader interface version with data driver..most recent..accept message of windows driver is not compatible version..install driver..are his the driver correct!!100℅ work...your problem is twrp ..you not have flash right recovery stock..twrp already installed on your device..you must cancel twrp with recovery stock..
---------- Post added at 09:23 AM ---------- Previous post was at 09:14 AM ----------
If twrp start you not have flashedrecovery stock correct....try to flash boot e recovery in fastboot and userdata of the firmware you have in the device before you in bootloop...with correct driver..and after reboot in recovery stock and wipe data factory reset,reboot and try to install firmware in dload..excuse for my english!!
frisko76 said:
With tool of dcunlocker i have save my device...android sooner single adb interface is not correct driver in fastboot mode...right key mouse in the pc driver device manager,update driver,manually search and toggle compatible driver..list of driver is down of samsung driver..driver correct is adb bootloader interface version with data driver..most recent..accept message of windows driver is not compatible version..install driver..are his the driver correct!!100℅ work...your problem is twrp ..you not have flash right recovery stock..twrp already installed on your device..you must cancel twrp with recovery stock..
---------- Post added at 09:23 AM ---------- Previous post was at 09:14 AM ----------
If twrp start you not have flashedrecovery stock correct....try to flash boot e recovery in fastboot and userdata of the firmware you have in the device before you in bootloop...with correct driver..and after reboot in recovery stock and wipe data factory reset,reboot and try to install firmware in dload..excuse for my english!!
Click to expand...
Click to collapse
Ok, I'll try a driver update, thanks
The thing with the recovery - right now I'm on the b145 recovery, but I've tried the b303 and the b321 recovery as well as the TWRP recovery. I just switched between each versions. But I will try the steps you provided, thank you very much!
It's just that I can't make a proper factory reset - it fails after a few seconds, but my phone is then reset. I will try it again with the files (everything I'm able to flash) of the last working firmware - in my case it was b321 before I ****ed up. Again, thanks
You have to access the update menu without a USB cable connected to update via Update file in dload. If you Reboot into Update Mode with a cable connected, your device will go into USB flashmode und will stop at 90%.
Keep pressing vol up + vol down + Power without a cable connected and Release the power button after the Vibration.
frisko76 said:
Yes..after you have flashed the file via fastboot write command fastboot reboot..put the full firmware in the folder of dload of internal sd card....press with usb connect of your pc volume up + power and enter in huawei erecovery..press shutdown....disconnect usb...press volume +,volume- and power and release only power after huawei logo..you enter in the upgrade firmware...if flashing block at 90℅ for several minute flashing not is correct..and you need this tool huaweiphonewriterv4 with usb connect to pc for flashing full firmware without error...you have need after flashing via fastboot recovery and boot the wipe data factory reset...try before with wipe data e factory reset in the recovery ..enter in this mode without usb press volume up + power..
Click to expand...
Click to collapse
If you do it this way, make sure there is no USB Logo in the circle.
yes..is correct..but if you had a b321 before crash you need to download full 321 and extract boot and recovery of 321 with huaweiexctrator tool and flash it in fast boot mode..then upgrade full firmware in recovery..
I have the same issue, i have mate s with tim brand, i change my brand to no brand, i have installed the firmware b114 (first b110) nex b145, and i try to instal mm beta, but installation fail, i try to flash b145 and fingerprint doesn't work. Next i contacted dc forum with live chat, they help me to return at b114, when finished the finger print It has worked well for 15 min and then gave me problems again.
They told me that They do not yet have a solution for people that have upgrate the mate to MM, and must be wait for the official firmware MM for solve that because the beta of MM is not full version
Guys, I did it
I just found a bigger OTA update which allows you to upgrade directly from b145 to b321.
b145 to b321 OTA
I loaded the recovery.img and boot.img of b145 via fastboot on the phone, after that I just put the downloaded zip on my external sd-card in the dload folder, made the update via settings and et voilà, done!
Just quick tested a few things, but everything seems to work.
Defaultuser88 said:
I have the same issue, i have mate s with tim brand, i change my brand to no brand, i have installed the firmware b114 (first b110) nex b145, and i try to instal mm beta, but installation fail, i try to flash b145 and fingerprint doesn't work. Next i contacted dc forum with live chat, they help me to return at b114, when finished the finger print It has worked well for 15 min and then gave me problems again.
They told me that They do not yet have a solution for people that have upgrate the mate to MM, and must be wait for the official firmware MM for solve that because the beta of MM is not full version
Click to expand...
Click to collapse
Maybe you can try to upgrade your phone with the full version of b145, and after that upgrade from b145 to b321.
Thanks everyone!
did you put the complete zip or only update file?
now i'm in b114 but have same feature like multiwindows of next version, i try to flash the full version of 145, first flash recovery and boot but can't install, the phone give me error :/ can't upgrade from b114 to b145
Hi Guys,
I'm stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off, but wil still boot in TWRP
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditionally'
- Another zip flashes, but gets stuck at the end, no reboot option (or was I to hasty? )
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
Not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
sndr1384 said:
Hi Guys,
I'm stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off, but wil still boot in TWRP
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditionally'
- Another zip flashes, but gets stuck at the end, no reboot option (or was I to hasty? )
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
Not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
Click to expand...
Click to collapse
downloading the ota wont cause this. Did u try doing the update after it downloaded?
---------- Post added at 02:27 AM ---------- Previous post was at 02:24 AM ----------
sndr1384 said:
Hi Guys,
I'm stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off, but wil still boot in TWRP
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditionally'
- Another zip flashes, but gets stuck at the end, no reboot option (or was I to hasty? )
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
Not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
Click to expand...
Click to collapse
Make sure u are one 3.0.4-1 twrp.
https://forum.xda-developers.com/oneplus-3/development/recovery-official-twrp-oneplus-3-3t-t3543391
go to the second post on this thread and download full zip of 4.0.3 and the use mtp while in twrp and proceed to follow the steps on how to install a rom.
do a factory reset
transfer file to phone and install.
the_rooter said:
downloading the ota wont cause this. Did u try doing the update after it downloaded?
---------- Post added at 02:27 AM ---------- Previous post was at 02:24 AM ----------
Make sure u are one 3.0.4-1 twrp.
https://forum.xda-developers.com/oneplus-3/development/recovery-official-twrp-oneplus-3-3t-t3543391
go to the second post on this thread and download full zip of 4.0.3 and the use mtp while in twrp and proceed to follow the steps on how to install a rom.
do a factory reset
transfer file to phone and install.
Click to expand...
Click to collapse
OK Thanks, That seemed to be it,
Back on 4.0.3 now, but with stock recovery so no root acces..
Now i should read the fist post to get root acces again?
Once again, thanks for the quick response, most of the times i'm just to afraid to go out and flashing right and left
sndr1384 said:
OK Thanks, That seemed to be it,
Back on 4.0.3 now, but with stock recovery so no root acces..
Now i should read the fist post to get root acces again?
Once again, thanks for the quick response, most of the times i'm just to afraid to go out and flashing right and left
Click to expand...
Click to collapse
use the toolkit to flash TWRP and Super SU
TimFlex said:
just reflash super Su through TWRP
Click to expand...
Click to collapse
I've lost TWRP and its has stock recovery again.
Guess I have to install it again?
sndr1384 said:
I've lost TWRP and its has stock recovery again.
Guess I have to install it again?
Click to expand...
Click to collapse
Sorry I miss read your post...
Just use the toolkit to flash twrp and SU.
sndr1384 said:
OK Thanks, That seemed to be it,
Back on 4.0.3 now, but with stock recovery so no root acces..
Now i should read the fist post to get root acces again?
Once again, thanks for the quick response, most of the times i'm just to afraid to go out and flashing right and left
Click to expand...
Click to collapse
use the toolkit as a last resort. use adb and flash via fastboot twrp 3.0.4-1
Phone Details:
Sony Xperia Z2 D6503 running Android 6.0.1
Boot loader unlocked
TWRP installed
Magisk v12.0
Had the phone rooted but un-rooted via SU and then re-flashed default os using Sony Companion and unlocked the boot loader
When i flash Magisk via TWRP it says its successful but when i go to reboot it won't boot up
Has anyone experienced this before or have successfully installed Magisk on Xperia Z2 that can help me out?
same problem here. can anyone recommend a solution ?
Same here.. Finally recovered my device flashing stock...
https://forum.xda-developers.com/lg-g5/development/stock-h850-20d-eu-rom-flashable-zips-t3592762
Before Magisk installs anything on your device, it will create a boot image backup in /data/stock_boot_<sha1>.img.gz
If anything goes wrong (e.g. bootloop), you can either use the uninstaller (recommended) or decompress the backup and manually restore your boot image
It should ALWAYS bring your device back to life (suppose you have a custom recovery that can decrypt your /data)
Click to expand...
Click to collapse
Source: Main Thread
TatesMan said:
Source: Main Thread
Click to expand...
Click to collapse
How to install the unistaller while the phone is in bootloop and i can't access recovery
deathlove70 said:
How to install the unistaller while the phone is in bootloop and i can't access recovery
Click to expand...
Click to collapse
If you can't access recovery you've got bigger issues than getting a bootloop from flashing Magisk. Can you access the bootloader to fastboot flash or boot a recovery image?
Didgeridoohan said:
If you can't access recovery you've got bigger issues than getting a bootloop from flashing Magisk. Can you access the bootloader to fastboot flash or boot a recovery image?
Click to expand...
Click to collapse
i can access flash mode and fast bootmode in flash tool. it says the phone is connected
deathlove70 said:
How to install the unistaller while the phone is in bootloop and i can't access recovery
Click to expand...
Click to collapse
try to boot using 'power+ volume down' to boot into recovery, if that didnt work then you have to boot into fastboot then flash the recovery from there
deathlove70 said:
i can access flash mode and fast bootmode in flash tool. it says the phone is connected
Click to expand...
Click to collapse
Cool. Then you should be good to go. If you don't know how to proceed from here, you should go to your device's forum for help.
can you make it simple and tell me what t do ?
what files should i flash ?
i have sony xperia Z2
---------- Post added at 11:16 PM ---------- Previous post was at 11:14 PM ----------
TatesMan said:
try to boot using 'power+ volume down' to boot into recovery, if that didnt work then you have to boot into fastboot then flash the recovery from there
Click to expand...
Click to collapse
boot via power+volume down didn't work. what's the file to flash ?
deathlove70 said:
can you make it simple and tell me what t do ?
what files should i flash ?
i have sony xperia Z2
---------- Post added at 11:16 PM ---------- Previous post was at 11:14 PM ----------
boot via power+volume down didn't work. what's the file to flash ?
Click to expand...
Click to collapse
best advice is to head to your device's forum and check for guides there on how to flash custom recovery (twrp) there.
Connect your phone with pc, go into fastboot mode and type on fastboot
Code:
fastboot boot recovery
Or try a simple ways with power button with volume -/+ or both just try it
i recovered the phone but lost the root and can't root my phone. i am on marshmallow stock firmware
Hi, today i saw a notification of magisk saying there's a new version aviable, i clicked and i selected the automatic update option, after done, i rebooted my phone, but now it is blocked in a loop witouth showing screen, what can i do?