I'm an android ROM newbie, but an old computer geek from way back in the 80's, so I do have some kind of understanding. I own an ATT Note 3.
I've experienced only minor problems with the two main ROM flash tools, that is, Safestrap 3.x and Odin 3.x but that's probably my fault and they don't crash. But Safestrap? Oy vay! That works also, but in the final boot, black screen thereafter, after booting from ANY slot, whether it be stock slot of other slots. Thank God for the backup function and Odin.
But I digress. Right in the beginning of my flashing Odyssey, everything worked fine! Flashed Alliance ROM no problem, as well as Dynamic Kat.
Oh yeah. Confused about all those two letter abbreviations, there's no abbreviation key here on the forums?
I tried the other ROMS in the Note 3 Rom sections and stuck wit that, but then, under Safestrap, the machine would reboot to black screen! No matter what I did, wiping, rooting (of course), re-installing different versions of SafeStrap, from early 3.x versions to 3.75, nothing! Odin gets my machine back to it's (I THINK) original state.
Badly confused. Knox is fine at 0x0. Don't know how to move forward. I would like to continue to try different ROMS but the same thing keeps on happening. Hope someone can help me. If anyone wants some kind of log output, I can do that (just tell me how and where).
Thanks
David Sanborn said:
I'm an android ROM newbie, but an old computer geek from way back in the 80's, so I do have some kind of understanding. I own an ATT Note 3.
I've experienced only minor problems with the two main ROM flash tools, that is, Safestrap 3.x and Odin 3.x but that's probably my fault and they don't crash. But Safestrap? Oy vay! That works also, but in the final boot, black screen thereafter, after booting from ANY slot, whether it be stock slot of other slots. Thank God for the backup function and Odin.
But I digress. Right in the beginning of my flashing Odyssey, everything worked fine! Flashed Alliance ROM no problem, as well as Dynamic Kat.
I tried the other ROMS in the Note 3 Rom sections and stuck wit that, but then, under Safestrap, the machine would reboot to black screen! No matter what I did, wiping, rooting (of course), re-installing different versions of SafeStrap, from early 3.x versions to 3.75, nothing! Odin gets my machine back to it's (I THINK) original state.
Badly confused. Knox is fine at 0x0. Don't know how to move forward. I would like to continue to try different ROMS but the same thing keeps on happening. Hope someone can help me. If anyone wants some kind of log output, I can do that (just tell me how and where).
Thanks
Click to expand...
Click to collapse
Sounds like maybe your flashing kit kat over jellybean or the other way around. Make sure if you have going to different android versions you flash the right Odin files each time. And install the right right version of safe strape. Or you get black screens
David Sanborn said:
I'm an android ROM newbie, but an old computer geek from way back in the 80's, so I do have some kind of understanding. I own an ATT Note 3.
I've experienced only minor problems with the two main ROM flash tools, that is, Safestrap 3.x and Odin 3.x but that's probably my fault and they don't crash. But Safestrap? Oy vay! That works also, but in the final boot, black screen thereafter, after booting from ANY slot, whether it be stock slot of other slots. Thank God for the backup function and Odin.
But I digress. Right in the beginning of my flashing Odyssey, everything worked fine! Flashed Alliance ROM no problem, as well as Dynamic Kat.
Oh yeah. Confused about all those two letter abbreviations, there's no abbreviation key here on the forums?
I tried the other ROMS in the Note 3 Rom sections and stuck wit that, but then, under Safestrap, the machine would reboot to black screen! No matter what I did, wiping, rooting (of course), re-installing different versions of SafeStrap, from early 3.x versions to 3.75, nothing! Odin gets my machine back to it's (I THINK) original state.
Badly confused. Knox is fine at 0x0. Don't know how to move forward. I would like to continue to try different ROMS but the same thing keeps on happening. Hope someone can help me. If anyone wants some kind of log output, I can do that (just tell me how and where).
Thanks
Click to expand...
Click to collapse
We have two versions of safestrap and each one works with a different OS.
1.Safestrap 3.71: that works ONLY with jellybean roms. Use it (If your phone says "4.3 MI9, MJ5, or NB4" in your "about phone" in settings) to flash any jellybean rom. Read the title of any rom you're attempting to flash. If it says "4.4.2 KK or Kitkat or NC2" then stay away.
2. Safestrap 3.72/3.75 ([emoji118] this is recommended) that works ONLY with Kitkat roms. Use it (If your phone says "4.4.2 NC2" in your "about phone" in settings) to flash any Kitkat/NC2 rom. Read the title of any rom you're attempting to flash. If it says "4.3 jellybean or JB" then stay away.
K-alz said:
We have two versions of safestrap and each one works with a different OS.
1.Safestrap 3.71: that works ONLY with jellybean roms. Use it (If your phone says "4.3 MI9, MJ5, or NB4" in your "about phone" in settings) to flash any jellybean rom. Read the title of any rom you're attempting to flash. If it says "4.4.2 KK or Kitkat or NC2" then stay away.
2. Safestrap 3.72/3.75 ([emoji118] this is recommended) that works ONLY with Kitkat roms. Use it (If your phone says "4.4.2 NC2" in your "about phone" in settings) to flash any Kitkat/NC2 rom. Read the title of any rom you're attempting to flash. If it says "4.3 jellybean or JB" then stay away.
Click to expand...
Click to collapse
basicaly what he said.. and since you said you did dynamic kat and alliance.. sounds like you are on the nc2 with Kitkat..
So, best bet is going to be make sure you have ss 3.75 and only flash the kitkat roms.. Dynamic kat, Alliance, Tweaked, Firekat, and you should be fine.. just dont try and flash any that are JB
From my Fired-up Note Pro 12.2!
Thank you. A combo of Android version AND baseband at the end?
Are the version numbers I'm looking for, a combination of the Android version (4.4.2) and the end of the Baseband number (NC2)
Basically I tried everything and your suggestions should very very suspiciously like everything I've done But.. I will give it one more shot.
Any possibility of SafeStrap 3.72 would work as opposed to 3.75 not working?
warfenix said:
Sounds like maybe your flashing kit kat over jellybean or the other way around. Make sure if you have going to different android versions you flash the right Odin files each time. And install the right right version of safe strape. Or you get black screens
Click to expand...
Click to collapse
---------- Post added at 10:51 PM ---------- Previous post was at 10:35 PM ----------
Version 4.42. I'll give everything a shot here although, I've tried all of this but maybe I've missed something. Thank you for responding.
warfenix said:
Sounds like maybe your flashing kit kat over jellybean or the other way around. Make sure if you have going to different android versions you flash the right Odin files each time. And install the right right version of safe strape. Or you get black screens
Click to expand...
Click to collapse
bodycode said:
Are the version numbers I'm looking for, a combination of the Android version (4.4.2) and the end of the Baseband number (NC2)
Basically I tried everything and your suggestions should very very suspiciously like everything I've done But.. I will give it one more shot.
Any possibility of SafeStrap 3.72 would work as opposed to 3.75 not working?
---------- Post added at 10:51 PM ---------- Previous post was at 10:35 PM ----------
Version 4.42. I'll give everything a shot here although, I've tried all of this but maybe I've missed something. Thank you for responding.
Click to expand...
Click to collapse
yeah if you are seeing 4.4.2 and nc2 you are on KK.. just make sure you are on 3.75 and all should be ok with flashing..
if for some reason it is borked,, go down to carls thread for odin files and how to odin back to stock nc2 and then start over and you should be fine
From my Fired-up Note Pro 12.2!
NO good. 3.75/stock slot/Alliance ROM fails.
Same ****. Black screen.
David Sanborn said:
I'm an android ROM newbie, but an old computer geek from way back in the 80's, so I do have some kind of understanding. I own an ATT Note 3.
I've experienced only minor problems with the two main ROM flash tools, that is, Safestrap 3.x and Odin 3.x but that's probably my fault and they don't crash. But Safestrap? Oy vay! That works also, but in the final boot, black screen thereafter, after booting from ANY slot, whether it be stock slot of other slots. Thank God for the backup function and Odin.
But I digress. Right in the beginning of my flashing Odyssey, everything worked fine! Flashed Alliance ROM no problem, as well as Dynamic Kat.
Oh yeah. Confused about all those two letter abbreviations, there's no abbreviation key here on the forums?
I tried the other ROMS in the Note 3 Rom sections and stuck wit that, but then, under Safestrap, the machine would reboot to black screen! No matter what I did, wiping, rooting (of course), re-installing different versions of SafeStrap, from early 3.x versions to 3.75, nothing! Odin gets my machine back to it's (I THINK) original state.
Badly confused. Knox is fine at 0x0. Don't know how to move forward. I would like to continue to try different ROMS but the same thing keeps on happening. Hope someone can help me. If anyone wants some kind of log output, I can do that (just tell me how and where).
Thanks
Click to expand...
Click to collapse
NO good. 3.75 fails!
3.75 and Alliance utterly fails into black screen. Safestrap reboot screen does this, but the other button (restore) gets me back to all the other buttons. Stock slot has size of zero partition size after alliance installation.
warfenix said:
Sounds like maybe your flashing kit kat over jellybean or the other way around. Make sure if you have going to different android versions you flash the right Odin files each time. And install the right right version of safe strape. Or you get black screens
Click to expand...
Click to collapse
AFter creating another slot and wipe, system mounting errors.
System mount errors all over the place after creating another slot, and installing Alliance. What's going on here? Something's really screwed up.
e: unable to mount '/system'
e: unable to mount '/systemorig'
over and over again
Can't check permissions after FActory reset. Please boot rom and try again after you reboot into recovery.
David Sanborn said:
3.75 and Alliance utterly fails into black screen. Safestrap reboot screen does this, but the other button (restore) gets me back to all the other buttons. Stock slot has size of zero partition size after alliance installation.
Click to expand...
Click to collapse
David Sanborn said:
3.75 and Alliance utterly fails into black screen. Safestrap reboot screen does this, but the other button (restore) gets me back to all the other buttons. Stock slot has size of zero partition size after alliance installation.
Click to expand...
Click to collapse
I would simply restore back to mj5 and start over. I did this last night simply to reset my phone cause I flash way to much lol. I would give that a try though. Thread is in the general section
How to restore to Mj5?
How do I downgrade to Mj5 from KK4.2?
Thanks
warfenix said:
I would simply restore back to mj5 and start over. I did this last night simply to reset my phone cause I flash way to much lol. I would give that a try though. Thread is in the general section
Click to expand...
Click to collapse
David Sanborn said:
How do I downgrade to Mj5 from KK4.2?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2559715
I know what your problem is brother. This same crap happened to me. To a T! For some reason when u wipe system in safesteap, it wipes everything out. EVERYTHING. except data. I learned the hard way,like u. So when u flash roms, don't wipe system, only factory reset. I wipe it 3× every time. Then install your Rom. You will b fine. I haven't had one problem ever since I stopped wiping system. And no random reboots or anything, Roms now flash, and boot as they should. Hope this helps.
David Sanborn said:
How do I downgrade to Mj5 from KK4.2?
Thanks
Click to expand...
Click to collapse
Dude. If you're on NC2 then don't ever do the MJ5. It'll give the same problem. Just Odin the first four files from this thread http://forum.xda-developers.com/showthread.php?t=2838117 then root with towelroot/install busybox (make sure to install it from within the app as well) then install ss 3.72 or 3.75 then start flashing Kitkat roms.
K-alz said:
Dude. If you're on NC2 then don't ever do the MJ5. It'll give the same problem. Just Odin the first four files from this thread http://forum.xda-developers.com/showthread.php?t=2838117 then root with towelroot/install busybox (make sure to install it from within the app as well) then install ss 3.72 or 3.75 then start flashing Kitkat roms.
Click to expand...
Click to collapse
True but I think his problem is wiping system when he installs roms. If he's still not able to boot up right then ya he needs to use Odin and those files to get up and running again.
I just wish it was like the note 2. With unlocked bootloader and real twrp recovery.
zounduser said:
True but I think his problem is wiping system when he installs roms. If he's still not able to boot up right then ya he needs to use Odin and those files to get up and running again.
I just wish it was like the note 2. With unlocked bootloader and real twrp recovery.
Click to expand...
Click to collapse
These four files are as easy as it gets. Literally, put phone into download mode, load files to their respective slots then hit start. That's all. Saves you much bullshiz
K-alz said:
These four files are as easy as it gets. Literally, put phone into download mode, load files to their respective slots then hit start. That's all. Saves you much bullshiz
Click to expand...
Click to collapse
Oh I agree. I've had to do it. I'm saying going forward so it doesn't happen again.
4 files in odin flash, done that 15 times.
I've flashed Odin stock COUNTLESS times! When I go back to flash kitkat ROMS, same **** all over again. Unbelievable. I'm at my wits end. My phone DOES boot with the Odin files. But when flashing anything else with safestrap, black screen again.
K-alz said:
These four files are as easy as it gets. Literally, put phone into download mode, load files to their respective slots then hit start. That's all. Saves you much bullshiz
Click to expand...
Click to collapse
David Sanborn said:
I've flashed Odin stock COUNTLESS times! When I go back to flash kitkat ROMS, same **** all over again. Unbelievable. I'm at my wits end. My phone DOES boot with the Odin files. But when flashing anything else with safestrap, black screen again.
Click to expand...
Click to collapse
You used the files in the thread I gave you a couple of posts back and it didn't work? Man I hope you still have your warranty. Just flash back to stock and take your phone to the AT&T warranty center and make up and issue with your phone and tell them that you can't deal with your phone anymore and get you a new phone. They believe about anything. If that didn't work then head to bestbuy if there is one by you and ask them to reflash the system for you (that's of course after you flash back to stock).
Not a block screen on Odin and no trips.
Did I mention Odin works fine? Knox is not tripped. All is well right after Odin upload to phone in Download mode. It's only when I flash anything that blackscreen curses me again. heh heh.
K-alz said:
You used the files in the thread I gave you a couple of posts back and it didn't work? Man I hope you still have your warranty. Just flash back to stock and take your phone to the AT&T warranty center and make up and issue with your phone and tell them that you can't deal with your phone anymore and get you a new phone. They believe about anything. If that didn't work then head to bestbuy if there is one by you and ask them to reflash the system for you (that's of course after you flash back to stock).
Click to expand...
Click to collapse
G870A, Soft Bricked, Need 4.4.4 or 5.1.1 completely stock "Unrooted" firmware file
EDITED 12-27-15:
XDA Assist has sent me to this forum (Thanx). Info and questions follow, here are the basic details:
G870A variant of the samsung S5 (Active)
Stock, unrooted, carrier locked
interrupted power during OTA update from AT&T (most likely 5.1.1)
forced phone into "download mode" and attempted to flash 4.4.2 (NE4) instead of update (actual file used: G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar.md5)
Phone stuck in bootloop with freeze/repeat at AT&T logo
unable to locate completely stock firmware file for 4.4.4 (G870AUCU1AOA1 or OA2) to flash back to most recent functional OS.
still currently able to force recovery mode or download mode.
**update:
As far as i know, the OTA for 5.1.1 did completely download but i dont think it "installed" because i removed battery during initial auto-reboot. The existing ROM would have been 4.4.4 mentioned above, updated and active official firmware from AT&T.
Basic Explanation of actions: I do fully realize that my actions and subsequent "incomplete" attempt to patch the software were unwise but i was merely weeks away from paying off the phone, owning it, having it unlocked by AT&T, properly rooting and installing a custom ROM (as i had successfully done to my wife's G900A). In a moment of panic, not wanting to be locked out of my phone forever by Lolipop, I ripped out the battery during the reboot that was loading Lolipop... every time I put the battery back in and hit power, the phone still attempted to load and write 5.1.1. So I thought maybe, the official firmware copy from 4.4.2, which my phone shipped with in 2014, might flash, even though i was not rooted or unlocked. Clearly i was mistaken but it was all i could think of under pressure.
At this point, I am Completely unconcerned about almost all data on phone or even the hardware EXCEPT for some extensive "memo" notes, which i desperately want to recover. I also dont care anymore about avoiding Lolipop because the memo data is more important to me. I am literally willing to rip the internal memory from this phone and send the SD to a data forensics company if that's what it takes, i no longer care about the phone at all... Having said that, recovering it myself and keeping the phone might be nice also.
Question: where might i find a completely stock firmware for 4.4.4 factory, UN-rooted,to flash; or what procedure might i use to directly pull data from the phone, while soft bricked, before doing a full factory reset?
Alternately, any advice on directions i may not have thought of yet?
I have looked pretty deep into the existing XDA forums for this info but i am only finding "custom ROMs" which are rooted or factory stock ROMS for 4.4.2 and most advice deals with rooting, then flashing. I am not rooting but simply flashing fully unrooted stock firmware AND starting in a bootloop/soft brick state. This is why i did a fresh thread.
Thanks in advance to anyone who might be able to help!
rtlarkin said:
Hello XDA Assist! After reading the stickies, i see that you may be able to direct me to the correct forum in which to post my main question. Here are the basic details:
G870A variant of the samsung S5 (Active)
Stock, unrooted, carrier locked
interrupted power during OTA update from AT&T (most likely 5.1.1)
forced phone into "download mode" and attempted to flash 4.4.2 (NE4) instead of update (actual file used: G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar.md5)
Phone stuck in bootloop with freeze/repeat at AT&T logo
unable to locate completely stock firmware file for 4.4.4 (G870AUCU1AOA1 or OA2) to flash back to most recent functional OS.
still currently able to force recovery mode or download mode.
Completely unconcerned about all data on phone or even the hardware EXCEPT for some extensive "memo" notes, which i want to recover.
Question: where might i find a completely stock firmware for 4.4.4 to flash; or what procedure might i use to directly pull data from the phone before doing a full factory reset?
Alternately, advice on directions i may not have thought of yet.
Thanks a bunch!
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. To get you the expert help you need, I'm going to move this thread to the most relevant Q&A forum for your device. Good luck!
Hello,
I am not an expert or anywhere close but I understand the basics of Android flashing / rooting, etc.
I happened to have rooted my G870A from AT&T successfully using a thread from XDA and I noticed they also provided the original firmware for G870A in case of problems:
http://forum.xda-developers.com/att...to-root-g870aucu1aoa1-4-4-4-2-7-2015-t3025119
So I thought this may help you considering you're looking for an original firmware for your G870A.
What I suggest is to try to flash "G870AUCU1ANE4_Full_Odin.tar" (available from the thread I linked above, I didn't want to rip the links out of the thread) using Odin v3.09+.
I did not use this firmware to root my G870A (only used the updates) but everything worked on the first try.
Follow instructions in the thread I provided. If that still doesn't work, you may need an Android expert on the case.
I wish you good luck in your data recovery. And yes, I registered just to post a reply to your thread.
(also: if you want to root your G870A, the thread explains the proper way to do it!)
Appreciate the thought
dapr0b said:
I happened to have rooted my G870A from AT&T successfully using a thread from XDA and I noticed they also provided the original firmware for G870A in case of problems:
http://forum.xda-developers.com/att...to-root-g870aucu1aoa1-4-4-4-2-7-2015-t3025119
So I thought this may help you considering you're looking for an original firmware for your G870A.
What I suggest is to try to flash "G870AUCU1ANE4_Full_Odin.tar"
Click to expand...
Click to collapse
Really appreciate the thought, however, that particular file is the file that i had originally used before posting. i think since my phone was factory locked and unrooted i did not have the permissions needed to basically "roll back" my phone to 4.4.2 but i am not educated enough to be sure of the exact problem flashing that file.
Thanks again for suggesting it though! I am nearing the time when I will just have to give up and send off the internal memory for physical extraction and data recovery
Hello,
I am also not an expert or anywhere close but I understand the basics of Android flashing / rooting, etc.
With that said: Let the OTA happen. You will not lose the files unless you already started a factory reset. Then your sol. You will not be able to root but you have a better chance of retrieving the files you are looking for. The phone is not like a computer. You can't just pull the HD and sent it out. You either already had the 5.0 kernel or the 5.1 kernel loaded before you stopped the process. This makes it impossible to go back. You can only go forward.
Good luck and let us know how you make out.
re: take the OTA
Sgt.CM said:
With that said: Let the OTA happen. You will not lose the files unless you already started a factory reset.
Click to expand...
Click to collapse
Thanks for that idea. the trouble at this point is that im stuck in a bootloop that catches on the att logo. I agree that the only option now is to continue forward. i just need a fully official software newer than 4.4.4 to load through kies or odin. at least i "hope" the newer file will work.
so far i have only been able to find stock ROMs that are rooted, and i dont think i can load a rooted stock ROM onto a carrier locked un-rooted phone.
The part you mentioned about the kernal is probably true. i had not thought of that before.
Long story shorter. Phone stolen. Phone had nandroid stored on my computer. Phone replaced by another Note 4 (PS, thief go pound sand). Didn't mess around, stock rom to Note 4 (ANK). Root. Recovery. Old image from lost phone used as recovery. (Yeah I didn't make a backup of original from new phone). Flashed over. Everything works fine. Now ready to put finger prints in. Error page pops up saying fingerprint scanner error. 72 hours of scouring this forum, internet, MULTIPLE stock rom flashes from the oldest to NJK to ANK and COG6. Clean flash, dirty flash NOTHING works. Makes no difference what I do, cannot get the fingerprint scanner to perform. Common problem, complaints all over the internet about it but NO SOLUTIONS. I have tried everything down to deleting directories and I cannot get the damn thing to work. Seriously doubt hardware issue. *#0*# sensor heading shows finger print scanner as Null and 0.0.0.0. Deleted cache. Deleted data from TIBU and now after three days I give up. Seems everyone has the problem but nobody knows why and when they do you get a half assed or worse answer as to how to fix it. Does anybody know how to get this thing working again. Do I need to flash an apk. Where can I find it. Do I need to rebuild. ? Can anyone flash that section fingerprint free and send it to me. I am just guessing. I know crap about how stuff works, I just know how to follow directions but this one has got me stumped.
Any help would be GREATLY APPRECIATED!
Regards,
Freddie did not get fingered but he needs it.
You need to flash stock firmware and verify that all is stock, sometimes after returning to stock you may have a miss matching error like bootloader or modem.
After running stock run smartswitch.
Pp.
PanchoPlanet said:
You need to flash stock firmware and verify that all is stock, sometimes after returning to stock you may have a miss matching error like bootloader or modem.
After running stock run smartswitch.
Pp.
Click to expand...
Click to collapse
Ok forgive me for my ignorance but if I run a stock firmware straight from Sammy shouldn't the bootloader and modem be part of the rom? It seems to me that doing a wipe should be like reinstalling windows, you format the drive and install the OS. There is nothing left and a complete rebuild of the file system occurs. Is this not what happens when you do a wipe in the recovery and then Odin the stock firmware? How can I be sure that when I install a stock rom everything is wiped and there is no hangers and the OS on the phone is rebuilt completely? When you say smartswitch I assume you mean the Sammy program.
jackler1 said:
Ok forgive me for my ignorance but if I run a stock firmware straight from Sammy shouldn't the bootloader and modem be part of the rom? It seems to me that doing a wipe should be like reinstalling windows, you format the drive and install the OS. There is nothing left and a complete rebuild of the file system occurs. Is this not what happens when you do a wipe in the recovery and then Odin the stock firmware? How can I be sure that when I install a stock rom everything is wiped and there is no hangers and the OS on the phone is rebuilt completely? When you say smartswitch I assume you mean the Sammy program.
Click to expand...
Click to collapse
Ok, I think I have found it but now I need to know how to fix it. Currently I have as follows in the about device screen:
Model SN-N910T
AHHA ------!!!!! - ANDROID VERSION 5.0
Baseband - N910TU1ANK4
Kernal version - 3.10.0-2796035 [email protected] #1 Thu Nov 13 18:01:07 KST 2014
Build number - KTU84P.N910TUVU1ANK4
So it seems the android version is wrong. Again forgive my stupidity but what exactly IS the android version. Meaning is that the baseband, the modem, what part of the stock rom is flashed wrong and where do I find that part to flash it correctly. I think I am making some progress just need input. Thanks Pp for getting me on track, now I just need a little shove to get this train rolling and maybe learn something in the process. If I fix it I then intend to write a proper write up for those lost souls out there who don't have to spend days....
So why does it say my android version is 5.0 when it should say 4.4.4?
Thank,
Freddy is getting nervous
First verify what version of the note 4 you have, Sm-N910T or Sm-N910T3 and flash proper firmware. Look under your battery.
Once you root you jumble up the phones ability to install firmware properly, and flashing stock firmware once with odin does not always secure components thus leaving you with unofficial status, "custom" and you think you went back to stock with no root but not official yet.
You need to make sure everything flashes and sticks, Model nunber, Android version, Basedand version, Kernel version, Build number.
Any of the modified components can stick and not be overwritten by stock odin flash.
Sometimes multiple flashes, or individual component flashes are required to go back to "official" stock form.
At this point you can verify that your fingerprint scanner works properly and leave it alone or proceed cautiously if root is really required ??? .
I only run stock and save myself all the headaches, I used to root back when Samsung phones where simple and less complicated without kernel security from Samsung.
I suggest latest 5.1.1 lollipop update, kitkat is primitive and outdated, you will be amazed at how well your note will run with latest firmware (with junk apps disabled).
Pp.
Here's a sample of my stock Note 4 running latest update.
Pp.
PanchoPlanet said:
Here's a sample of my stock Note 4 running latest update.
Pp.
Click to expand...
Click to collapse
Nope, I have wiped this phone a million times, reinstalled factory rom over the top of itself a dozen times, installed the baseband and bootloader separately after that and NOTHING changes it still will not work. I have read the complete internet from front to back and it seems nobody knows but the shadow.....Thanks for taking the time for trying to help me out though...
When you say wipe, do you mean factory reset?
Several resets in a row should wipe it clean. Something is stuck, could be the kernel, that will prevent a clean install.
You need to find a way to wipe partitions individually using ADB on the PC, that should allow for a clean install.
Pp.
jackler1 said:
Long story shorter. Phone stolen. Phone had nandroid stored on my computer. Phone replaced by another Note 4 (PS, thief go pound sand). Didn't mess around, stock rom to Note 4 (ANK). Root. Recovery. Old image from lost phone used as recovery. (Yeah I didn't make a backup of original from new phone). Flashed over. Everything works fine. Now ready to put finger prints in. Error page pops up saying fingerprint scanner error. 72 hours of scouring this forum, internet, MULTIPLE stock rom flashes from the oldest to NJK to ANK and COG6. Clean flash, dirty flash NOTHING works. Makes no difference what I do, cannot get the fingerprint scanner to perform. Common problem, complaints all over the internet about it but NO SOLUTIONS. I have tried everything down to deleting directories and I cannot get the damn thing to work. Seriously doubt hardware issue. *#0*# sensor heading shows finger print scanner as Null and 0.0.0.0. Deleted cache. Deleted data from TIBU and now after three days I give up. Seems everyone has the problem but nobody knows why and when they do you get a half assed or worse answer as to how to fix it. Does anybody know how to get this thing working again. Do I need to flash an apk. Where can I find it. Do I need to rebuild. ? Can anyone flash that section fingerprint free and send it to me. I am just guessing. I know crap about how stuff works, I just know how to follow directions but this one has got me stumped.
Any help would be GREATLY APPRECIATED!
Regards,
Freddie did not get fingered but he needs it.
Click to expand...
Click to collapse
try doing this...
1st - run chainfire triangle away v3.26
2nd - boot into recovery and wipe everything 3 times except external sdcard.. especially data...
3rd - boot in download mode and ODIN whatever firmware u wanna use... 2 times...
happened to me when the note 4 first came out... I had to exchange to a new note 4...
also whenever u do a nandroid.. U MUST REMOVE ANY SAVED FINGERPRINTS... so u can use that backup again..
if u restore a nandroid with a saved frintprints, it won't work, u must delete data and start fresh..
I don't know if u messed it up by restoring a nandroid from a previous phone and with saved fingerprints stored...
will do thanks for the advice will advise
Nope, nothing I do including stock or otherwise works. When you hit +#0*# it says null and 0.0.0.0 unless someone knows something I don't, it's borked. The thing is even if I used a nandroid and it overwrote my fingerprints where the ones in the nandroid so you would think it would work. Chalk it up to who knows....thanks anyway. Still looking if anyone finds solution....