Has anybody still have the blank screen issue?
Mine did it last night blank screen but the hdmi is still working when hooked to my tv.
Is there a software fix for this? I am on the stock 10.26.1.18 4.3 JB.
The touch screen still work when hooked up to the tv though hdmi just the screen is off.
Is it something to do with smart saver mode or display sleep.
I used the hdmi hookup to factory rest and shut off and when I plugged the tablet back in the screen started working again, I hope somebody can help because I really love the tablet otherwise.
Thanks
Blank screen
Moved to help section
Related
I don't know when it started but I'm quite sure that I used to be able to use the touchscreen with the keyboard extended. I am running the latest hboot and radio with the cyanogen nightlies and newest pershoot kernel.
Is anybody have this problem?
Perhaps I just need to reflash radio and hboot but its weird because it works fine with the keyboard closed.
Thanks for your help.
Powered by HTC
Your definitely supposed to be able to use the touchscreen when the keyboards out, That's how I use my phone most of the time. I think it's a hardware problem to me like some cable to the touchscreen got messed up so when you open up your keyboard it gets disconnected, but I really don't know could be wrong. Also, I don't see how reflashing hboot or the radio will fix it, as far as I know they don't affect the touchscreen at all.
landoftheeskimos said:
I don't know when it started but I'm quite sure that I used to be able to use the touchscreen with the keyboard extended. I am running the latest hboot and radio with the cyanogen nightlies and newest pershoot kernel.
Is anybody have this problem?
Perhaps I just need to reflash radio and hboot but its weird because it works fine with the keyboard closed.
Thanks for your help.
Powered by HTC
Click to expand...
Click to collapse
As "Ianlikescake" Said its hardware not software. I work in a second hand phone shop & the most common problem with the G1 (Apart from people abusing this beautiful device) is a ribbon cable tears in the back when the screen has been opened & closed a lot.
Normally when it goes the touch screen goes completely but we have had one customer when the same thing happened to him as in your situation, We sent the phone off to be repaired & all they did was replace the cable
So re flashing the radio & hboot wont fix it, Sorry!
KarlosTheJackal said:
As "Ianlikescake" Said its hardware not software. I work in a second hand phone shop & the most common problem with the G1 (Apart from people abusing this beautiful device) is a ribbon cable tears in the back when the screen has been opened & closed a lot.
Normally when it goes the touch screen goes completely but we have had one customer when the same thing happened to him as in your situation, We sent the phone off to be repaired & all they did was replace the cable
So re flashing the radio & hboot wont fix it, Sorry!
Click to expand...
Click to collapse
My phone has a problem not really similar but it still has to do with the screen. When i lock the phone and when I try to unlock it when the screen is down the screen doesn't turn on. But when I flip the screen up the screen turns on. Once I unlock the phone the screen works fine i flip it back down and it works untill it locks. So do you think it's a problem with the ribbon cable?
Ianlikescake said:
My phone has a problem not really similar but it still has to do with the screen. When i lock the phone and when I try to unlock it when the screen is down the screen doesn't turn on. But when I flip the screen up the screen turns on. Once I unlock the phone the screen works fine i flip it back down and it works untill it locks. So do you think it's a problem with the ribbon cable?
Click to expand...
Click to collapse
I think I have a similar issue. Whenever I have the keyboard closed, the screen will not turn on when you press the end-key. Only the LED lights will turn on. When you flip the keyboard out, the screen turns on and the phone is functional.
Over the next few weeks, I then realized that this only happens when the phone's keyboard is completely closed. If you leave the keyboard out 1cm or so (to the point where you can only see the spacebar), you can turn on the phone. Check to see if it works for you.
Sleeps17 said:
I think I have a similar issue. Whenever I have the keyboard closed, the screen will not turn on when you press the end-key. Only the LED lights will turn on. When you flip the keyboard out, the screen turns on and the phone is functional.
Over the next few weeks, I then realized that this only happens when the phone's keyboard is completely closed. If you leave the keyboard out 1cm or so (to the point where you can only see the spacebar), you can turn on the phone. Check to see if it works for you.
Click to expand...
Click to collapse
That used to work for me but now the problem got worse. Sometimes even when the keyboards out the screen doesn't turn on so I have to mess with the screen for a little bit till it works. Now I know it's the cable that's messed up. I think the reason it's like this is from repetitive flipping out the screen. I gotta be more careful next time if i can fix it.
After Update to Lollipop i have a strange behavior with the Daydream Feature.
When i plug in my device (in StandBy) to the Docking Station, Phone Screen goes on and Lockscreen show very short before Daydream is starting, then Daydream disappears and device is unlocked and in Homescreen with Screen normaly on. After the timeout (30 sec.) Daydream comes up again and stays.
I hope the description is ok
Under Kitkat the Daydream was starting normal, without going to homescreen again.
Anybody knows what the problem could be?
hi, ive same problem with Z1, have you find a solution since april ?
No. Nothing until now
Hello I found the why, you do not plug the phone while sreen is of
When you want plug (dock or just cable) and see daydream you must push on button once again.
Daydream work only while screen is on
It is not a good dev idea but it work like that
By
Good morning!
So I have a AVH-4100NEX and a Samsung Galaxy 6 Edge plus. Android auto worked perfectly at first, I updated the head unit to firmware 1.03 and it still worked fine but suddenly last night the screen on the deck kept turning off as soon as my phone screen shut off. Music keeps playing but no video. If I tap my phone screen to wake it up then it comes back until the phone screen turns off again. Both android auto and car mode say connected in the phone drop down bar, and it's fully functional - I can even press buttons on the Hu screen with it off and commands will work if I bump the right one. I don't see any settings and I can't think of anything that would cause this - any suggestions? Both my phone and the deck are on the newest version of the software available.
Thanks!
Cody
Sounds like a hardware failure that happens when it heats up.
I don't recall any similar reports.
Thanks for the reply! I reset my phone finally and it's working again, however if it comes back I'll try to see if the phone is warmer than usual.
Thanks -
Cody
couple of weeks ago I noticed screen just goes black when trying to come out of dim mode. did factory reset by unpairing. I can re pair ok using the dim screen so all seems ok apart from the black display when in main display mode. ie I can still swipe etc to pair the phone even though there is no display, I just have to wait till screen goes dim to see what to do now. any suggestions . never tried to use laptop with cradle and watch so is there some sort of diagnostic programme using a laptop/pc. tried theatre mode etc and it vibrates but still no main display
joeninety0 said:
couple of weeks ago I noticed screen just goes black when trying to come out of dim mode. did factory reset by unpairing. I can re pair ok using the dim screen so all seems ok apart from the black display when in main display mode. ie I can still swipe etc to pair the phone even though there is no display, I just have to wait till screen goes dim to see what to do now. any suggestions . never tried to use laptop with cradle and watch so is there some sort of diagnostic programme using a laptop/pc. tried theatre mode etc and it vibrates but still no main display
Click to expand...
Click to collapse
it also shows the charging state ok brightly when on the cradle
Hi, my screen broke recently and i can't use the tactil touch. I can see the image but can't use. So i decided to buy a LCD + Tactil Touch + Frame. I didn't mount yet the screen. I only disconneted the screen flex and connected the flex of the new screen. But the problem is that is black. The screen seems to turn on but i don't see anything, is all black.
EDIT: I don't know where to ask. I flashed to the stock ROM, 4.2.2 and still black. I updated to the last version Sony has for my phone, 5.1.1 and still is black. I don't know what more to do. Is all working good, even the sounds when i touch the screen. But i can't see anything the screen is working but there's no image. My phone is Xperia Z.
Anyone?
Please help!
Broken screen? Is the old one still working? If yes: return the new and broken display and get a replacement!
The touch("screen") and feedback (vibrate and sound) will work without the lcd! It is a different layer on the screen and is seperatly connected to the mainboard of the cellphone. Also your screen could be working and your backlight not! Turn on the phone and point a bright flashlight on the screen, maybe you will see something, but even then, get a replacement.