Related
Hey there! I am like the biggest noob on XDA, but i really need help. I have rooted my Galaxy Ace GT-S5830D (File Provided if anyone is in need of it) and now I need help with getting ClockWork Recovery to work on it. I will also attach the .zip file that I used. I get a Status 7 Error.
I have done a lot of research on this topic, and found out that Status 7 Errors are because the recovery i was trying to flash is not 'compatible' with my S5830D. So this is where I need help. I need to find out what ClockWork Recovery I should use for my Galaxy Ace Gt-S5830D.
* Phone Info:
My phone is the : Galaxy Ace GT-S5830D
Android Version: 2.3.4
Phone Carrier: Koodo (My phone is unlocked though)
Region: Canada
Other Info: I had my phone previously rooted, and flashed ClockWork Recovery that was modified by my friend so I dont get Status 7 Errors. But I would keep getting messages like "Cant Open (file name)" or "Cant Mount (file name)" when i booted into recovery. I thought that was normal, and tried to flash a Custom Rom ( also modified by my friend), I dont really remember what it was called maybe like PAC or something. And so I bricked my phone.... Then recovered it by ODIN.
** What I am trying to achieve is to flash a custom ROM on my phone, because I dont really like the GingerBRead feel. I love the Ice Cream Sandwich feel. I have used launchers, such as Go Launcher, ADW Launcher, Holo Launcher, but they slow down my phone so much im getting really annoyed.
Any help is appreciated.
Files for Rooting and Clockwork Recovery were found on the following link:
http://forum.xda-developers.com/showthread.php?p=35875935
MadForGamez said:
Hey there! I am like the biggest noob on XDA, but i really need help. I have rooted my Galaxy Ace GT-S5830D (File Provided if anyone is in need of it) and now I need help with getting ClockWork Recovery to work on it. I will also attach the .zip file that I used. I get a Status 7 Error.
I have done a lot of research on this topic, and found out that Status 7 Errors are because the recovery i was trying to flash is not 'compatible' with my S5830D. So this is where I need help. I need to find out what ClockWork Recovery I should use for my Galaxy Ace Gt-S5830D.
* Phone Info:
My phone is the : Galaxy Ace GT-S5830D
Android Version: 2.3.4
Phone Carrier: Koodo (My phone is unlocked though)
Region: Canada
Other Info: I had my phone previously rooted, and flashed ClockWork Recovery that was modified by my friend so I dont get Status 7 Errors. But I would keep getting messages like "Cant Open (file name)" or "Cant Mount (file name)" when i booted into recovery. I thought that was normal, and tried to flash a Custom Rom ( also modified by my friend), I dont really remember what it was called maybe like PAC or something. And so I bricked my phone.... Then recovered it by ODIN.
** What I am trying to achieve is to flash a custom ROM on my phone, because I dont really like the GingerBRead feel. I love the Ice Cream Sandwich feel. I have used launchers, such as Go Launcher, ADW Launcher, Holo Launcher, but they slow down my phone so much im getting really annoyed.
Any help is appreciated.
Files for Rooting and Clockwork Recovery were found on the following link:
http://forum.xda-developers.com/showthread.php?p=35875935
Click to expand...
Click to collapse
All that you need is here! http://forum.xda-developers.com/showthread.php?t=2313363
Read all post they are really usefull
maybe the files attached by you are corrupted, you'll find it in the link I've posted
Status 7 Error Help!
Thanks for the quick reply! The problem is, this CWM file you gave me is exactly the same as I used. I got a Status 7 Error.
As stated before, I had CWM on my phone before. I achieved it by my friend modifying it.
Status 7 Errors occur because of whatever you are trying to flash goes through this process to check the phone's model or something.
This YouTube Titled: How To Fix Status 7 Error with CWM Recovery on Rooted Android!
The problem that occurred after my friend modifying the file was that, i get messages like "Cant Open (some file directory)" or Cant Mount (some file directory)".
Thanks for the help. But I need a fix for my phone, remember it isn't just the Galaxy Ace GT-S5830 but there is a D at the end. Hope someone can reply and help me.
Status 7 Fix??
Should I try to fix the error as shown in this thread?
forum.xda-developers.com/showthread.php?t=2302599
I am sorry, I read the thread you were talking about, but I got even more confused at the end.
Hope I get some more help.from you.
MadForGamez said:
Thanks for the quick reply! The problem is, this CWM file you gave me is exactly the same as I used. I got a Status 7 Error.
As stated before, I had CWM on my phone before. I achieved it by my friend modifying it.
Status 7 Errors occur because of whatever you are trying to flash goes through this process to check the phone's model or something.
This YouTube Titled: How To Fix Status 7 Error with CWM Recovery on Rooted Android!
The problem that occurred after my friend modifying the file was that, i get messages like "Cant Open (some file directory)" or Cant Mount (some file directory)".
Thanks for the help. But I need a fix for my phone, remember it isn't just the Galaxy Ace GT-S5830 but there is a D at the end. Hope someone can reply and help me.
Click to expand...
Click to collapse
well. I'm gonna explain my post... I think your SD-CARD is corrupted and your attached files too so format YOUR SD-CARD, NOT YOUR PHONE!! then download the files in the link I posted at first and try again!
Use an USB sd-card reader in order to format your sdcard
Right?
Is it worth it??
Viper The Ripper said:
well. I'm gonna explain my post... I think your SD-CARD is corrupted and your attached files too so format YOUR SD-CARD, NOT YOUR PHONE!! then download the files in the link I posted at first and try again!
Use an USB sd-card reader in order to format your sdcard
Right?
Click to expand...
Click to collapse
I'll give it a go. but the card readers cost aroung $30 so is it worth itbti be going and spending money for this phone?
Never Mind
I will get a USB SD and Micro SD Card Reader. It costs only $7 So.I should be good. Ill Reply Back to.tell how it goes.
MadForGamez said:
I will get a USB SD and Micro SD Card Reader. It costs only $7 So.I should be good. Ill Reply Back to.tell how it goes.
Click to expand...
Click to collapse
well, don't you have any friend with an USB card reader¿? ...
I hope you'll solve your trouble
Viper The Ripper said:
well, don't you have any friend with an USB card reader¿? ...
I hope you'll solve your trouble
Click to expand...
Click to collapse
Unfortunately, i have no friends with a SD card reader. I will get one tomorrow, and post back to tell you how it went.
I got ClockWorkMod to work!
Hey man, sorry for the late reply, but I got a workinf cwm on my phone. I really need help on which custom rom will be most suitable for me.
I want it to look and feel like JellyBean. But I dont want the rom to be slow, I want it to be stable and fast.
Sorry for bothering you again, lol, bur I dont know much about ROMS. I have looked around, and people say CM is pretty good, but people also say that the rom gets slow after some time. Also, I cant find the right version for my phone model. Remember, my phone model is GT-S5830D. there is a D at the en. Hope for a reply, I really need this man thanks.
MadForGamez said:
Hey man, sorry for the late reply, but I got a workinf cwm on my phone. I really need help on which custom rom will be most suitable for me.
I want it to look and feel like JellyBean. But I dont want the rom to be slow, I want it to be stable and fast.
Sorry for bothering you again, lol, bur I dont know much about ROMS. I have looked around, and people say CM is pretty good, but people also say that the rom gets slow after some time. Also, I cant find the right version for my phone model. Remember, my phone model is GT-S5830D. there is a D at the en. Hope for a reply, I really need this man thanks.
Click to expand...
Click to collapse
I'm glad!
Well to ask for the best rom or similar questions is NOT allowed in xda forums, you can try the last Mardon's built, but CM roms are worse than stock's rom (in my opinion), STOCK=STABLE=LONG BATTERY LIFE=NO RAMDOM REBOOTS=NO PROBLEMS AT ALL, so you need to decide how do you use your phone and how would you like to use it.
If I'm not wrong D model is the same as 5830 model so no problem if you flash whatever 5830 custom rom, the only could be the modem band, you could face problems with it.
Have a look at this thread http://forum.xda-developers.com/showthread.php?t=1225493
I just wanted to Quote the thread that I got the CWM to work from.
Mandark52 said:
here it is forum.xda-developers.com/showthread.php?t=1168417 hit thanx if helpd
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2360630
Sorry for spamming the Forum with the same question .
Oh thanks for the reply I will take a look at the thread you linked.
I use my phone to make phone calls and or texting. But I need the look and feel of JellyBean that's all.
my i537 wont boot any more it just goes to a screen with a triangle and says update failed
and i cant get kies to connect to it
and i even tried a one click and it failed
is this thing bricked or can it be revivied
Thanks for any help
Kameirus said:
my i537 wont boot any more it just goes to a screen with a triangle and says update failed
and i cant get kies to connect to it
and i even tried a one click and it failed
is this thing bricked or can it be revivied
Thanks for any help
Click to expand...
Click to collapse
Go to the root kitkat thread. Or the firmware thread. Grab the Odin files for the 4.3 ota. Flash all of them except the bootloader tar. Then just wait. Don't pull battery or anything else.if you see the at&t logo keep waiting. When it fully boots, continue with kitkat upgrade and root. Be sure to grab my upgraded kk Ota from the last few pages of the kk root thread . Also make sure to look at my backup process so you'll be able to make and use backups. Oh and thank the other 43 people for not even bothering to help. I'll check back and see how things see going.
blaz1nr said:
Go to the root kitkat thread. Or the firmware thread. Grab the Odin files for the 4.3 ota. Flash all of them except the bootloader tar. Then just wait. Don't pull battery or anything else.if you see the at&t logo keep waiting. When it fully boots, continue with kitkat upgrade and root. Be sure to grab my upgraded kk Ota from the last few pages of the kk root thread . Also make sure to look at my backup process so you'll be able to make and use backups. Oh and thank the other 43 people for not even bothering to help. I'll check back and see how things see going.
Click to expand...
Click to collapse
you Sir are a genius ..got it to boot just waiting on your kk ota to finish downloading so i can finish the upgrade
will let you know how the rest goes
Thank you so much
ok on 442 now
how do i flash your 442 update
and any clue why i cant flash the 442 carbon rom
and again thank you so much
as i just got this phone yesterday and couldnt believe i almost bricked it
as ive been modding phones since the original razr came out and never even came close to
what happened with this phone
Just flash it in safestrap as the KK update. Read the root kitkat thread again if you need a refresher on anything. Make sure you do not wipe cache/dalvik when installing the zip. Just reboot recovery and install the zip.As for the custom rom I would say because of locked bootloader. This is my first galaxy,I'm an HTC guy normally.Now that I think about it. Once your on KK safestrap cant mount the system.I found a work around using the pawned kernel,that is also in my backup thread.
help
blaz1nr said:
Just flash it in safestrap as the KK update. Read the root kitkat thread again if you need a refresher on anything. Make sure you do not wipe cache/dalvik when installing the zip. Just reboot recovery and install the zip.As for the custom rom I would say because of locked bootloader. This is my first galaxy,I'm an HTC guy normally.Now that I think about it. Once your on KK safestrap cant mount the system.I found a work around using the pawned kernel,that is also in my backup thread.
Click to expand...
Click to collapse
my phone its dead help me no charge no led nothing
ghbone said:
my phone its dead help me no charge no led nothing
Click to expand...
Click to collapse
Follow the exact steps I laid out above. If you went step by step following my instructions,then following the root instructions everything should be fine. Once you get 4.4 back up dont play around with it until you make a backup.
blaz1nr said:
Follow the exact steps I laid out above. If you went step by step following my instructions,then following the root instructions everything should be fine. Once you get 4.4 back up dont play around with it until you make a backup.
Click to expand...
Click to collapse
Mine just dont turn power on, ist like you put off battery and try to power on just nothing happen dead dead.
if a conect to pc just detect qualcom usb
help
ok i am trying to sideload my ota update on my att s4 active sgh-i357. It had problem with digitizer not working. So i reset it a few times. Now it stuck in reboot loop, or it freezes on the battery. Not even the att symbol. I try to restore in recovery but it reboots out of recovery as well. I read this is a softbrick but im lost on what i should do next. I have tried several different things. But nothing will get past this point
htc 626g+ "no command" while booting
hello there,
I have rooted my htc with king root (mobile version) worked fine until i updated via ota. when i try to install the update by reboot the boodh comes.."no command" i have tried clearing cache and wiping data and have read most forums about abd and stuff like thatin internet, cant understand as much to implement them.I dont know what zip file to send via abd prompt as those forums are telling.can't find a ruu for this device not even cyanogen mods fo this (to give it a try)
some one please help me..
In general, I don't believe running an OTA update while rooted is a good practice.
raaja..*) said:
hello there,
I have rooted my htc with king root (mobile version) worked fine until i updated via ota. when i try to install the update by reboot the boodh comes.."no command" i have tried clearing cache and wiping data and have read most forums about abd and stuff like thatin internet, cant understand as much to implement them.I dont know what zip file to send via abd prompt as those forums are telling.can't find a ruu for this device not even cyanogen mods fo this (to give it a try)
some one please help me..
Click to expand...
Click to collapse
DNRDustin said:
In general, I don't believe running an OTA update while rooted is a good practice.
Click to expand...
Click to collapse
yeah... you know mistakes.... happens
many of us have done same mistake(many threads in related topics here)
it ll b good if some one hlps
cant even find a custom rom for this mobile :crying:
I've found Facebook member HTC Desire 626G+ Development:
He post link to his CWM backup of the phone:
I've installed CWM on the phone and next restorw the backup.
Phone now is working although it is described as Desire 320.
ststefanov said:
I've found Facebook member HTC Desire 626G+ Development:
He post link to his CWM backup of the phone:
I've installed CWM on the phone and next restorw the backup.
Phone now is working although it is described as Desire 320.
Click to expand...
Click to collapse
How to do it?
I tried but On the Installation Screen its shows Error "No Partition selected"
when there was no partition was displaying like
Boot
System
NVRam
etc...
so do you have any idea?
or which CWM Version you were using?
There are very good instructions how to do it in Facebook thread.
Just search for user "HTC Desire 626G+ Development".
I've checked it today and there is new message:
DONT USE THIS GUIDE. NEW MORE RELIABLE AND PROPER STOCK BACKUP IS COMING WHICH WILL RISE DEAD DEVICE TO LIVE.
WAIT UNTIL THEN.
Click to expand...
Click to collapse
So my computer bit the dust about two months ago so i found myself in a situation where yes, I had a PC back when i unlocked the bootloader, ran ADB fastboot commands and flashed the twrp recovery.img . But now, I have no access to computers whatsoever. So heres what I did:
Downloaded - Str8upx's TWRP backup found here - http://forum.xda-developers.com/showpost.php?p=67914526&postcount=43
Nightbreed813s flashable MM rom for Sprint Phones found here - http://forum.xda-developers.com/des...m-flashable-stock-htc-626s-debloated-t3293602
After downloading the files, I extracted the TWRP backup from the .zip file, navigate with a file explorer past the folder with a Serial Number on it, copied the backup folder that comes next, moved it to my external sd cards TWRP backup folder .
Then I booted into TWRP, after backing up my current ROM, wiped everything and then flashed the sprint ROM
after that, I restored ONLY the System portion of Str8upx's backup. (this means i didn't flash the system image either, ONLY SYSTEM)
Rebooted phone and I was done. Still had SuperSU, but had to install busybox.
I'd like to note that from this point on everything works without any problems and I'm on the official Metro MM. The red letters show up every time I boot the phone now, instead of only when i boot into TWRP like it used to so please be aware of that. Also, my baseband and kernel appear to be different than the ones in Metro MM. I do intend on updating once somebody makes a TWRP flashable version of MM. But until then, i'll stay on this as my daily driver as again, everything does work. I figured I'd share what I learned and maybe we will see less threads about " i tried to install MM on my rooted 626s and it failed " feel free to ask any questions if there are any. All thanks goes to Nightbreed813 and Str8upx for uploading the files. If you have a second and you use these files, Click thanks on the linked posts to thank them.
I need to make all aware that wifi isn't going to work with this method. So if you plan on using wifi, you're gonna have to flash the ruu. Full disclosure I no longer stand behind this due to lack of wifi. I went ahead and flashed with the RUU and fastboot flashed twrp back. This solution was only a temporary fix for me. As it should be for anybody if its used at all
You reckon this'll work with Boost Mobile?
TeamLiquid.koyo said:
You reckon this'll work with Boost Mobile?
Click to expand...
Click to collapse
There's already a flashable MM ROM for the boost 626s, http://forum.xda-developers.com/des...m-flashable-stock-htc-626s-debloated-t3293602
Yeah. On boost that's all you need
Genius... Simply Genius
talksickisil said:
So my computer bit the dust about two months ago so i found myself in a situation where yes, I had a PC back when i unlocked the bootloader, ran ADB fastboot commands and flashed the twrp recovery.img . But now, I have no access to computers whatsoever. So heres what I did:
Downloaded - Str8upx's TWRP backup found here - http://forum.xda-developers.com/showpost.php?p=67914526&postcount=43
Nightbreed813s flashable MM rom for Sprint Phones found here - http://forum.xda-developers.com/des...m-flashable-stock-htc-626s-debloated-t3293602
After downloading the files, I extracted the TWRP backup from the .zip file, navigate with a file explorer past the folder with a Serial Number on it, copied the backup folder that comes next, moved it to my external sd cards TWRP backup folder .
Then I booted into TWRP, after backing up my current ROM, wiped everything and then flashed the sprint ROM
after that, I restored ONLY the System portion of Str8upx's backup. (this means i didn't flash the system image either, ONLY SYSTEM)
Rebooted phone and I was done. Still had SuperSU, but had to install busybox.
I'd like to note that from this point on everything works without any problems and I'm on the official Metro MM. The red letters show up every time I boot the phone now, instead of only when i boot into TWRP like it used to so please be aware of that. Also, my baseband and kernel appear to be different than the ones in Metro MM. I do intend on updating once somebody makes a TWRP flashable version of MM. But until then, i'll stay on this as my daily driver as again, everything does work. I figured I'd share what I learned and maybe we will see less threads about " i tried to install MM on my rooted 626s and it failed " feel free to ask any questions if there are any. All thanks goes to Nightbreed813 and Str8upx for uploading the files. If you have a second and you use these files, Click thanks on the linked posts to thank them.
Click to expand...
Click to collapse
I downloaded the Metro pcs RUU onto a PC to install the update, then fast boot flashed twrp. (At this moment it didn't show the red warning letters In the bottom of the boot screen) I suspect it happened when I flashed the SuperSU.zip
i2andog said:
Genius... Simply Genius
Click to expand...
Click to collapse
Thanks man. Lol....
Did you try? If so, any issues?
IsaacGuti said:
I downloaded the Metro pcs RUU onto a PC to install the update, then fast boot flashed twrp. (At this moment it didn't show the red warning letters In the bottom of the boot screen) I suspect it happened when I flashed the SuperSU.zip
Click to expand...
Click to collapse
I really don't know what causes the red letters. Personally speaking, I can still manage with or without them.
talksickisil said:
Thanks man. Lol....
Did you try? If so, any issues?
Click to expand...
Click to collapse
No I have a working PC... I just really admired your use of magiver like resources
Gotcha. . Yeah, it's not the first time. And not just phones. I Jimmy rig my way thru a lot of life haha. To be honest I'd probably still do this even if I had my PC. I'm just not a fan of fastboot and adb commands. And I don't want to lock my bootloader again
Yes.. those mother f'in boot loaders would burn in hell if I had any say ... in uh.. boot loaders souls or whatever... ... *crickets*.... hey check that out
Sent from my HTC Desire 626s using Tapatalk
talksickisil said:
So my computer bit the dust about two months ago so i found myself in a situation where yes, I had a PC back when i unlocked the bootloader, ran ADB fastboot commands and flashed the twrp recovery.img . But now, I have no access to computers whatsoever. So heres what I did:
Downloaded - Str8upx's TWRP backup found here - http://forum.xda-developers.com/showpost.php?p=67914526&postcount=43
Nightbreed813s flashable MM rom for Sprint Phones found here - http://forum.xda-developers.com/des...m-flashable-stock-htc-626s-debloated-t3293602
After downloading the files, I extracted the TWRP backup from the .zip file, navigate with a file explorer past the folder with a Serial Number on it, copied the backup folder that comes next, moved it to my external sd cards TWRP backup folder .
Then I booted into TWRP, after backing up my current ROM, wiped everything and then flashed the sprint ROM
after that, I restored ONLY the System portion of Str8upx's backup. (this means i didn't flash the system image either, ONLY SYSTEM)
Rebooted phone and I was done. Still had SuperSU, but had to install busybox.
I'd like to note that from this point on everything works without any problems and I'm on the official Metro MM. The red letters show up every time I boot the phone now, instead of only when i boot into TWRP like it used to so please be aware of that. Also, my baseband and kernel appear to be different than the ones in Metro MM. I do intend on updating once somebody makes a TWRP flashable version of MM. But until then, i'll stay on this as my daily driver as again, everything does work. I figured I'd share what I learned and maybe we will see less threads about " i tried to install MM on my rooted 626s and it failed " feel free to ask any questions if there are any. All thanks goes to Nightbreed813 and Str8upx for uploading the files. If you have a second and you use these files, Click thanks on the linked posts to thank them.
Click to expand...
Click to collapse
But what i'm wanting to know is, did you flash the standard or the De -Bloated rom? I'm not clear on that. Also are there any differences in the UI or OS that you noticed in this mm update?
s3llz said:
But what i'm wanting to know is, did you flash the standard or the De -Bloated rom? I'm not clear on that. Also are there any differences in the UI or OS that you noticed in this mm update?
Click to expand...
Click to collapse
As far as which sprint ROM you flash debloated version or regular it doesn't really matter, since once you restore the twrp backup you're going to be on the standard non debloated metro official MM. As far as UI differences, there's a few things here and there. Nothing mind blowing. What was advantageous for me is the expanded internal storage. I love it.
I tried installing with the RUU and always got error 155 all the time some I am trying this method out. I would like to know will this method still work on a phone with exposed binary, and for those with MetroPCS, does the service still work as well.
Hello I tried doing everything as followed installed the sprint now after every call or just randomly i get "SIM card has been inserted" "Select a carrier" which T-mobile is the only one to work. Then after a call and again randomly i get this message again and have to repeat the process. Does anyone know why and how can I fix this?
bnawolf said:
Hello I tried doing everything as followed installed the sprint now after every call or just randomly i get "SIM card has been inserted" "Select a carrier" which T-mobile is the only one to work. Then after a call and again randomly i get this message again and have to repeat the process. Does anyone know why and how can I fix this?
Click to expand...
Click to collapse
In my instructions you don't stay on the sprint rom. You're supposed to restore the backup after installing that rom. But I need to make all aware that wifi isn't going to work with this method. So if you plan on using wifi, you're gonna have to re lock your bootloader and flash the ruu
Here is something you can solve if you have pro knowledge of rooting.
Condition:-
The usb port of device cannot transfer data and it cannot be repaired.
The bootloader of device is unlocked.
Situation:-
Once the device had a KitKat based ROM named PAC-MAN. Owner loves the ROM and the data soo much that he don't want to loose that hence he took a backup of this ROM and data from CWM recovery.
After a week, The official ROM of marshmallow was flashed from recovery. Got 5-6 continues updates of security patches and finally the device was on Android 6.0.1. Now when he wanted to roll back, he found the old recovery (CWM) was replaced by the stock marshmallow recovery.(due to security patches updates sent to devices.
Mission:-
The Owner wants to rollback to the same kitkat based backuped wih (CWM)
Device Name:- Micromax android one (first-gen) aq4501 sprout 4
satyam755755 said:
Here is something you can solve if you have pro knowledge of rooting.
Condition:-
The usb port of device cannot transfer data and it cannot be repaired.
The bootloader of device is unlocked.
Situation:-
Once the device had a KitKat based ROM named PAC-MAN. Owner loves the ROM and the data soo much that he don't want to loose that hence he took a backup of this ROM and data from CWM recovery.
After a week, The official ROM of marshmallow was flashed from recovery. Got 5-6 continues updates of security patches and finally the device was on Android 6.0.1. Now when he wanted to roll back, he found the old recovery (CWM) was replaced by the stock marshmallow recovery.(due to security patches updates sent to devices.
Mission:-
The Owner wants to rollback to the same kitkat based backuped wih (CWM)
Device Name:- Micromax android one (first-gen) aq4501 sprout 4
Click to expand...
Click to collapse
Hmmm, yeah, the stock MM recovery replaced the cwm.
If he still had the backup then you need to flash the recovery via fastboot mode and restore it. But, eversince the usb port isnt working then its impossible. btw, how did he charge his phone, if the port isnt working?
sachin n said:
Hmmm, yeah, the stock MM recovery replaced the cwm.
If he still had the backup then you need to flash the recovery via fastboot mode and restore it. But, eversince the usb port isnt working then its impossible. btw, how did he charge his phone, if the port isnt working?
Click to expand...
Click to collapse
k so yuknow he can flash a recovery using Flashify(search google play) rite?(if he has root that is and oem unlock) using that he can flash cwm to and then restore the bakup he made also as he said above only the data on the port isn't working
sachin n said:
Hmmm, yeah, the stock MM recovery replaced the cwm.
If he still had the backup then you need to flash the recovery via fastboot mode and restore it. But, eversince the usb port isnt working then its impossible. btw, how did he charge his phone, if the port isnt working?
Click to expand...
Click to collapse
In case phone port damaged , battery can be charged by taking it out of mobile and charge with two-pin charger plugged in electrical socket (in india it is called "Daddu Charger")
sk99 said:
In case phone port damaged , battery can be charged by taking it out of mobile and charge with two-pin charger plugged in electrical socket (in india it is called "Daddu Charger")
Click to expand...
Click to collapse
dude he said that data on the port isnt working jesus please read what the person has said before reading other comments
okay so heres the thing i think in theory it should be possible to manually rewrite the recovery using terminal (if youre desperate)
also did you try flashify?or those other gimmiks that can flash your phone as long as it has root?
sachin n said:
Hmmm, yeah, the stock MM recovery replaced the cwm.
If he still had the backup then you need to flash the recovery via fastboot mode and restore it. But, eversince the usb port isnt working then its impossible. btw, how did he charge his phone, if the port isnt working?
Click to expand...
Click to collapse
Only Data Transfer is not Working. Charging is working Fine. And Yes I got the Solution
Here is The Answer
So, I tried in many Forums, Facebook Groups but nobody had the Answer.:crying:
Fortunately, After Thinking a lot, While i was pooping (The time when great ideas Evolve), I got a Brilliant idea of Solving the Case.
So here is What i thought.
I have a friend with the Exact Same Model. @chitu98
I thought to replace The Whole Bottom Chipset (which includes speakers, Charging pin and many more Hardware Parts) with the friends' Device's Chip Just for flashing time. After I flash my Recovery Back Using His Chip (Bottom Chipset), I return His Device and Yeah I Successfully Accomplished my Mission and Achieved My target
@sachin n
@sk99
@[FeaR]ᴬs4500
satyam755755 said:
So, I tried in many Forums, Facebook Groups but nobody had the Answer.:crying:
Fortunately, After Thinking a lot, While i was pooping (The time when great ideas Evolve), I got a Brilliant idea of Solving the Case.
So here is What i thought.
I have a friend with the Exact Same Model. @chitu98
I thought to replace The Whole Bottom Chipset (which includes speakers, Charging pin and many more Hardware Parts) with the friends' Device's Chip Just for flashing time. After I flash my Recovery Back Using His Chip (Bottom Chipset), I return His Device and Yeah I Successfully Accomplished my Mission and Achieved My target
@sachin n
@sk99
@[FeaR]ᴬs4500
Click to expand...
Click to collapse
Cheers mayte! :silly:
satyam755755 said:
So, I tried in many Forums, Facebook Groups but nobody had the Answer.:crying:
Fortunately, After Thinking a lot, While i was pooping (The time when great ideas Evolve), I got a Brilliant idea of Solving the Case.
So here is What i thought.
I have a friend with the Exact Same Model. @chitu98
I thought to replace The Whole Bottom Chipset (which includes speakers, Charging pin and many more Hardware Parts) with the friends' Device's Chip Just for flashing time. After I flash my Recovery Back Using His Chip (Bottom Chipset), I return His Device and Yeah I Successfully Accomplished my Mission and Achieved My target
@sachin n
@sk99
@[FeaR]ᴬs4500
Click to expand...
Click to collapse
That's the most jerry rig everything methods I've ever read about someone doing