Database Develop

Wizard as a flashlight?

I didn't get the wizard for the camera, so the fact the flash is really nothing more than a flashlight doesn't bother me. However, it did occur to me that it would be really nice if you could turn that light on/off with a softbutton or from the start menu.
I know, it sounds weird, but I find myself using it as one periodically.
I guess I ought to look around and see what it takes to code for this thing ...

I wanted to use it as a flashlight, but I got more light from the front screen so I never got around to turning on the flash.

bkeahl said:
I didn't get the wizard for the camera, so the fact the flash is really nothing more than a flashlight doesn't bother me. However, it did occur to me that it would be really nice if you could turn that light on/off with a softbutton or from the start menu.
I know, it sounds weird, but I find myself using it as one periodically.
I guess I ought to look around and see what it takes to code for this thing ...
Click to expand...
Click to collapse
bad idea ...the camera flash/led will only last 10 minutes of continuous use then get dim and die. the led is crap. it a known fact .
sorry

A program that would make the screen completely white would work well. I had a similar program on an old Nokia phone I used to have.

if you start the camera and turn the flash on, then hit the power button on top it will put the phone it sleep mode. as soon as you need the light again, hit the power button and it comes right back on. works great when im djing and i forgot my mini flashlight or those batteries died.

aron7awol said:
A program that would make the screen completely white would work well. I had a similar program on an old Nokia phone I used to have.
Click to expand...
Click to collapse
Here you are

This app made the screen white on my Compact to use as a torch, no idea if it works with the Vario as well.
edit: Meschle beat me to it. Some people can't be beaten by a humble noob like me.

Koksie said:
Meschle beat me to it. Some people can't be beaten by a humble noob like me.
Click to expand...
Click to collapse
lol koksie! I had that one too lurking somewhere :wink:

meschle said:
Here you are
Click to expand...
Click to collapse
Thanks. It takes surprisingly long to load for some reason, but it does accomplish the task.

aron7awol said:
meschle said:
Here you are
Click to expand...
Click to collapse
Thanks. It takes surprisingly long to load for some reason, but it does accomplish the task.
Click to expand...
Click to collapse
The one koksie posted loads faster, but the advantage with torch is that you can also use it to keep the backlight on, for say when you are playing a game and the backlight keeps going off - i find that so irritating! To do this you need start menu mapped to a hardware button - i use the comm button.

Ah, what a crew! I agree the screen can act as a good light as well, just seemed like I could put the virtually useless LED to use .
I'll give these a try, and thanks!
Brian

faria said:
bad idea ...the camera flash/led will only last 10 minutes of continuous use then get dim and die. the led is crap. it a known fact .
sorry
Click to expand...
Click to collapse
One day before I went to sleep, I put my wizard to charge and, dont ask me how, accidentally pressed camera button and somehow got the LED on. When i woke up 8 HOURS LATER i found my wizard sitting there with the LED on. It was turned on all night.
2 months later, It still works to date.

Perhaps they had a bad production run of them. Of course, with my luck, that's what I would have gotten!

zeuzinn said:
faria said:
bad idea ...the camera flash/led will only last 10 minutes of continuous use then get dim and die. the led is crap. it a known fact .
sorry
Click to expand...
Click to collapse
One day before I went to sleep, I put my wizard to charge and, dont ask me how, accidentally pressed camera button and somehow got the LED on. When i woke up 8 HOURS LATER i found my wizard sitting there with the LED on. It was turned on all night.
2 months later, It still works to date.
Click to expand...
Click to collapse
The LED should have a very long life of about 100 000 hours at normal voltage. It will be excellent if somebody can develop a software to turn on/off the flashlight. I always us it as a torch.

biolover said:
zeuzinn said:
faria said:
bad idea ...the camera flash/led will only last 10 minutes of continuous use then get dim and die. the led is crap. it a known fact .
sorry
Click to expand...
Click to collapse
One day before I went to sleep, I put my wizard to charge and, dont ask me how, accidentally pressed camera button and somehow got the LED on. When i woke up 8 HOURS LATER i found my wizard sitting there with the LED on. It was turned on all night.
2 months later, It still works to date.
Click to expand...
Click to collapse
The LED should have a very long life of about 100 000 hours at normal voltage. It will be excellent if somebody can develop a software to turn on/off the flashlight. I always us it as a torch.
Click to expand...
Click to collapse
Biolover there are enough stories on the forum of device led's burning out to put one off this idea - do a search and you will see what I mean :wink: The quality seems to vary.

Its not hard to replace the LED though, the wizard can easily be taken apart.

Backlight turns on randomly

Does anyone else have this happening my screen will randomly turn on after i press the button on the top to turn it off? it is very annoying at night it makes me think i have an incoming call or text message and being that Im on call 24x7 sometimes have to check it everytime it happenes which is about ever 10 to 15 minutes????
I searched on here already and couldnt find anything?????
any help?????

yes, that's probably normal behaviour, since the SCREENN-OFF button also works as SCREEN-ON button, whatever necessary...
but my screen doesn't turn on randomly...
my tip: just put your device in a thick wool sock and put it face down on your desk ;-)...
another possibility is, that if you charge it over night and the plug isn't fitting right then the screen may turn off because it constantly thinks it's plugged in and out...
Best Luck and nice dreams
Regards

not only when plugged in
actually it doesnt only happen when the phone is plugged in it happenes all the time

brianb1998 said:
actually it doesnt only happen when the phone is plugged in it happenes all the time
Click to expand...
Click to collapse
mine does it too upon occasion. i think it has to do woth background processes running, or your phone is roaming for alternative towers.

mine does it too. I have the Sprint CDMA version. Someone on a different forum thought it might be the phone looking for a signal. But no one was really sure. Haven't been able to find much useful info on it anywhere.

it's switching towers...my Mogul did it too.

is there any way to make it stop

In some of the aboce cases it can be that someone is trying to make a video call to you while Phone skin is disabled.

I also have this problem. My screen will turn on from time to time without any obvious reason. It's especially annoying at night... I have my phone in a cradle on my nightstand, so when the screen comes on the whole room lights up! I've resorted to keeping a shirt over it at night.
I tried setting the phone to 100% roaming since my Sprint signal is low in my apartment and I read somewhere that the phone will turn on when it switches towers/service, but alas it did not help me.
ANY IDEAS FOR A FIX?

Active Display doesnt turn on sometime?

Its random but sometimes when I pick up the phone active display doesnt turn on and it wont work for a little while and then it will start working again anybody know whats going on? Im on 4.4 verizon.. I remember I had seen someone else either on here or reddit and they had a solution but now i cant find it..

Guitarboarder28 said:
Its random but sometimes when I pick up the phone active display doesnt turn on and it wont work for a little while and then it will start working again anybody know whats going on? Im on 4.4 verizon.. I remember I had seen someone else either on here or reddit and they had a solution but now i cant find it..
Click to expand...
Click to collapse
That is weird. What do you do to fix it? just keep pressing the power button? or do you just wait and the screen eventually turn on? is it working meanwhile... like, can you lock yourself out on the pattern lock while the screen is off but supposed to be on?
probably totaly unrelated, but the nexus one have an issue with the amoled/digitizer. When the screen is on while charging (or on for longer periods without digitizer use) the digitizer will not work until the amoled is turned off/on again. maybe some crazy electro migration bug or badly spec caps going on on google+htc design for the n-one... maybe they haven't learned any lesson

Guitarboarder28 said:
Its random but sometimes when I pick up the phone active display doesnt turn on and it wont work for a little while and then it will start working again anybody know whats going on? Im on 4.4 verizon.. I remember I had seen someone else either on here or reddit and they had a solution but now i cant find it..
Click to expand...
Click to collapse
Mine does that too sometimes, it did it most recently driving in the car. Have you tried wiping the screen? Sometimes if I make sure my screen is spotless, it's more responsive...don't know if it's placebo or not.
But you aren't the only one!

gcbxda said:
That is weird. What do you do to fix it? just keep pressing the power button? or do you just wait and the screen eventually turn on? is it working meanwhile... like, can you lock yourself out on the pattern lock while the screen is off but supposed to be on?
probably totaly unrelated, but the nexus one have an issue with the amoled/digitizer. When the screen is on while charging (or on for longer periods without digitizer use) the digitizer will not work until the amoled is turned off/on again. maybe some crazy electro migration bug or badly spec caps going on on google+htc design for the n-one... maybe they haven't learned any lesson
Click to expand...
Click to collapse
Im not sure maybe. Ill have to see what the screen does before it happens. When Ive noticed it my screen was off just sitting on the table and when I pick it up nothing happens.

wwarren92 said:
Mine does that too sometimes, it did it most recently driving in the car. Have you tried wiping the screen? Sometimes if I make sure my screen is spotless, it's more responsive...don't know if it's placebo or not.
But you aren't the only one!
Click to expand...
Click to collapse
I dont think it has anything to do with the screen though. Becuase ill pick up my phone and it wont turn on. What ive done is turn the screen on and off and then leave it for a few minutes and it just starts working again... pretty annoying but it happens very rarely

wwarren92 said:
Mine does that too sometimes, it did it most recently driving in the car. Have you tried wiping the screen? Sometimes if I make sure my screen is spotless, it's more responsive...don't know if it's placebo or not.
But you aren't the only one!
Click to expand...
Click to collapse
I think it doesn't work while in the car because it can't differentiate the pick-up motion vs. the motion from driving.
Not sure why it wouldn't happen sitting on a table though, unless it was just recently set down.

How to fix screen backlight on HTC One m7

I haven't seen this posted anywhere so I figured I would post for anyone having a similar issue with their One.
Recently my phones backlight stopped working. It would not work at boot or in the ROM. I tried flashing to stock and tried optimizing the proximity sensor, but no luck. It was clearly a hardware problem.
Not seeing any solution to this issue other than people saying it is the screen or the motherboard I decided to order a new screen.
Well installed the new screen, still no backlight. I was about to give up on it and just buy another phone, but I got the feeling that the light sensor may still be my issue. The backlight on the capacitive buttons would not turn on unless I helded down the power button to force shutdown. This meant the backlights for the buttons at least worked and something else in the phone was preventing them from turning on.
I decided to remove the light sensor from the daughterboard (opposite the power button connector). Booted it back up, and the screen came right on. The phone works great without it, other than auto brightness. The screen still turns off when against face during calls.
So long story short if your LCD and button backlights aren't working don't order an LCD or rule your phone dead right away. Open it up and take out the light sensor, it could be the culprit.
I'm going to order a new sensor and can update with results after installing if anyone is interested. In the meantime I'm using the phone without it, no hiccups so far.

htc one screen backlight issue
nsodmordex said:
I haven't seen this posted anywhere so I figured I would post for anyone having a similar issue with their One.
Recently my phones backlight stopped working. It would not work at boot or in the ROM. I tried flashing to stock and tried optimizing the proximity sensor, but no luck. It was clearly a hardware problem.
Not seeing any solution to this issue other than people saying it is the screen or the motherboard I decided to order a new screen.
Well installed the new screen, still no backlight. I was about to give up on it and just buy another phone, but I got the feeling that the light sensor may still be my issue. The backlight on the capacitive buttons would not turn on unless I helded down the power button to force shutdown. This meant the backlights for the buttons at least worked and something else in the phone was preventing them from turning on.
I decided to remove the light sensor from the daughterboard (opposite the power button connector). Booted it back up, and the screen came right on. The phone works great without it, other than auto brightness. The screen still turns off when against face during calls.
So long story short if your LCD and button backlights aren't working don't order an LCD or rule your phone dead right away. Open it up and take out the light sensor, it could be the culprit.
I'm going to order a new sensor and can update with results after installing if anyone is interested. In the meantime I'm using the phone without it, no hiccups so far.
Click to expand...
Click to collapse
hey
i'm having the same problem are you sure that it is a hardware issue and not the software issue my h/w buttons doesn't light at all and my screen stays black for some time after unlocking the phone it comes back but the brightness is too low
any suggestions would be appriciated

Mine was a hardware issue, the backlight did not turn on at all, even on the htc start screen. The capacitive buttons would only flash when holding down the power button. If ypurs is intermittent and your phone is rooted you cantry insralling an app fhat alows you to change the proximity settings, sorry, cant remember the name of the app i tried. If the app can't detect the sensor it is likely broken like mine was. If that doesnt work try a different rom.
If neither of those help it is likely a hardware issue.

i used the app both light senor and proximity sensor are working fine
any other tips that i can try

kingkri said:
i used the app both light senor and proximity sensor are working fine
any other tips that i can try
Click to expand...
Click to collapse
Sorry for taking so long to respond, just noticed your reply.
Did you ever get it working? If a different rom did not solve your issue maybe your sensor is just dirty. You could try cleaning it with a can of compressed air. Not sure how effective it would be, but it may help.

Hi @nsodmordex, my HTC One M7 is in the same situation as you describe, no backlight, but working. I'm going to try your suggestion of removing the light sensor, but I'm unable to find it, I'm not sure where the light sensor is.
Please, can you tell me which component is the light sensor? This is a photo of the daughter board:
htt ps://d3nevzfk7ii3be.cloudfront.net/igi/ALPJIMWqGsLwul5Y.huge
Thanks!

Found it... it's located behind the daughter board, at the two little holes of the front cover of the phone. I have removed it but no luck, the screen continues black, but the mobile is working good.
it seems a screen related problem, I'm going to try to change the screen and see if it comes to life again.

Drain battery
Hi all,
I also have this problem and found out that if I drain the battery completely and wait about 1 hour, it turns back on when I put the charger in the phone, if the screen doesn't turn on, drain and wait longer, if it does turn back on then power the phone. Do not wait till it has a little bit power because than it fails again and you must drain and wait again.
It works for me and I will make a video of it and post a link later.
Hope it works for you all!
Tip: use a led flashlight to see what's on the display
Ps. Stock m7

Whats the definitive solution for no backlight screen?

jvpag said:
Whats the definitive solution for no backlight screen?
Click to expand...
Click to collapse
Clean / replace the lightsensor

Dippie83 said:
Clean / replace the lightsensor
Click to expand...
Click to collapse
I had removed it and the backlight isn,t working

jvpag said:
I had removed it and the backlight isn,t working
Click to expand...
Click to collapse
Than the lightsensor is broken, are the contacts on the back of the sensor 100% clean, in my case it was dust that created the error.
Is the display not broken?

Dippie83 said:
Than the lightsensor is broken, are the contacts on the back of the sensor 100% clean, in my case it was dust that created the error.
Is the display not broken?
Click to expand...
Click to collapse
The display is ok because I can see what is on the phone with the LED flash of a Galaxy S2 so I think that the display is not broken.
The backlight doesn´t turn on with the light sensor and without it either. But i can remember that the last time that it worked the Autobrightness was fine
Edit: I tried rebooting on fastboot and recovery via ADB and the screen is without backlight too
PD: Sorry for my English

jvpag said:
The display is ok because I can see what is on the phone with the LED flash of a Galaxy S2 so I think that the display is not broken.
The backlight doesn´t turn on with the light sensor and without it either. But i can remember that the last time that it worked the Autobrightness was fine
Edit: I tried rebooting on fastboot and recovery via ADB and the screen is without backlight too
PD: Sorry for my English
Click to expand...
Click to collapse
In my case, if it worked it was ok also the autobrightness.
I think the sensor is broken and if you replace it the backlight comes back on (sensor is +- 10€ in holland)
Just give it shot
Have you tried the battery drain?
Hehe my english is also not very good

Dippie83 said:
In my case, if it worked it was ok also the autobrightness.
I think the sensor is broken and if you replace it the backlight comes back on (sensor is +- 10€ in holland)
Just give it shot
Have you tried the battery drain?
Hehe my english is also not very good
Click to expand...
Click to collapse
But as I read, if I remove the sensor and turn on the phone without it, will it work?
In this moment the phone has 0% battery and if I plug the charger i can see the red light and if i use a flashlight, i can see "the battery with the lightning" on the screen

jvpag said:
But as I read, if I remove the sensor and turn on the phone without it, will it work?
In this moment the phone has 0% battery and if I plug the charger i can see the red light and if i use a flashlight, i can see "the battery with the lightning" on the screen
Click to expand...
Click to collapse
No i dont think thats gonna work, push the power button (whitout charger) every time till the battery is really empty, than wait an hour.
If you connect the charger and the screen will not turn on, wait longer. a night is even better.
If the screens comes on then turn direct the phone on dont let it dim itself or else you can wait again.
This worked in my case but my lightsensor was dirty and after a cleanup it worked normal and it stil works.

Dippie83 said:
No i dont think thats gonna work, push the power button (whitout charger) every time till the battery is really empty, than wait an hour.
If you connect the charger and the screen will not turn on, wait longer. a night is even better.
If the screens comes on then turn direct the phone on dont let it dim itself or else you can wait again.
This worked in my case but my lightsensor was dirty and after a cleanup it worked normal and it stil works.
Click to expand...
Click to collapse
Okay, thanks, it worked once, but with the phone turned on and the backlight working, if the screen turns off, the backlight runs away again.
can you repeat point by point what i need to do?
when you say "drain" the battery, you mean leaving the phone on till it turns off? then what should i do? wait an hour and plug the charger to see if it works right? okay, and later if the phone turns on what i need to do?

jvpag said:
Okay, thanks, it worked once, but with the phone turned on and the backlight working, if the screen turns off, the backlight runs away again.
can you repeat point by point what i need to do?
when you say "drain" the battery, you mean leaving the phone on till it turns off? then what should i do? wait an hour and plug the charger to see if it works right? okay, and later if the phone turns on what i need to do?
Click to expand...
Click to collapse
By 'drain the battery' i mean continuously turning the phone on with a empty battery till it does nothing, not even vibrate.
It must be so empty that the phone not knows its a phone.
And yes if the screen comes on just power it on, thats it.
1 drain
2 wait
3 plug in charger
4 screen comes on
5 turn phone on
6 done
1 drain
2 wait
3 plug in charger
4 screen stays off
5 drain and wait longer
that are the steps that worked for me

Thanks @Dippie83 , it "worked" draining the battery and waiting forma a night to turn it on but when i turn on and i push the power button yo lock the screen, the backlight stops working

Any idea?

[Q] Screen doesn't stay on anymore

When I bought the watch back in November, the screen would stay ON all the time. I know it to be a fact because I used to leave it on a desk without ever touching it (for hours) and it would always display the time (it was like having a desk clock, for when I would rather not wear it to have more comfortable wrists while writing or that sort of things).
Also in the train (I used to travel a lot in that period) I would leave the watch hung on the wall while sleeping (at night) and it would not turn itself off, so I could check the time in case I woke up in the middle of the night, without neededing to reach for the watch.
Recently (it was January) I noticed that it does not work like that anymore. After a very short time, the watch screen goes off. It is still in standby: it goes back on if I touch it or press the button.....but I want it to stay on 'without limits' (in dimmed mode). It was like that before.
Somehow this is the behaviour of the 'keep screen always ON' setting.....but in fact, that setting is already set to 'ON'.
So is there some kind of firmware update that changed this behaviour? I would like the clock to not go off when it is not on my wrist, sometimes I just need to keep track of time AND have my wrists free....and it is not possible anymore.

nothing?
It is actually a key feature....no point in having a watch that doesn't show the time unless you touch it (if you leave it on a desk or simply hung on a wall at night). Also I wonder why it changed (did not do this last year so I thought it must be some update but could not find anything in the changelogs about this).

You have the Setting enabled in Android Wear for keeping the screen Always On?
My screen only goes out when on the charger. When I had a Samsung Gear Live, it would stay on while on the charger, via the Developer Setting on the watch to keep the screen on while charging. But that has never worked for me on the "R", not even last year.

The screen of the watch goes off while charging (although I remember it being different back in October...).
The settting for 'screen always on' is activated. I activated from the watch, from the phone, restarted the watch, nothing worked. The screen goes off after a while IF I DO NOT wear the watch.
No problem if I wear it....that means there is some connection between the screen going off and the accelerometer :-/
But as I said, I need the watch to stay on even if I am not wearing it (working at a desk or similar when I can't wear the watch, I would look at the time at the watch lying on the table). I am sure 1000% it did not turn off before (started in January, or at least I noticed it in January). I read all the changelogs for all the updates and I did not find anything about this.
Can someone also try? My brother has the same watch and his also goes off if he does not wear it. I find this really unneeded. At least they should have put a setting available.

You best option is Wear Charging Widget. It will keep the screen on when charging. Although it does dim a bit, like a night clock in a mostly dark room. It is the only option I've found that works.
I wanted the "R" to work like my old Gear Live and keep the screen on when charging and even when not wearing it. But I've never found a means for that to happen short of Wear Charging Widget.
Sent from my Nexus 10 using Tapatalk

Darnell_Chat_TN said:
You best option is Wear Charging Widget. It will keep the screen on when charging. Although it does dim a bit, like a night clock in a mostly dark room. It is the only option I've found that works.
I wanted the "R" to work like my old Gear Live and keep the screen on when charging and even when not wearing it. But I've never found a means for that to happen short of Wear Charging Widget.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Yes it looks it is like that now. Maybe you bought the watch after the two last updates (501 / 502) ?
Would be nice if somebody else, besides me, could confirm that in fact the watch was staying on (dimmed mode) all the time even without wearing it in the previous months (release date to December).

rogermorse said:
Yes it looks it is like that now. Maybe you bought the watch after the two last updates (501 / 502) ?
Would be nice if somebody else, besides me, could confirm that in fact the watch was staying on (dimmed mode) all the time even without wearing it in the previous months (release date to December).
Click to expand...
Click to collapse
I've had my "R" since last year, before v5 came out for the watches. And the "R" never kept the screen on while charging. I never noticed it involved simply not wearing it. Since when I'm not wearing, I'm charging.
Sent from my Nexus 10 using Tapatalk

Screen shuts off completely
The screen on my GWR has started shutting off, completely dark not dim. I checked the settings and it is set to "Always on screen": ON.
This is a fairly new problem, it did not used to behave this way, I could see the screen dim, and move my wrist and it would go bright and display "OK Google".
Any ideas on how to fix this bug? Or do I/we need to wait for a software update/fix? Current software version: 5.0.2
Watch is not very useful if I can't see the time without having to push the crown/button.
Anyone else having this issue?

Screen is working again.
Had some time to try some options, did a "Reset Device" and the screen came back.
Lost all the apps I had loaded on the watch, not a big deal, wasn't using many of them.
Guess I can just download them again from the play store, if I want them back. Something I loaded onto the watch may have caused the loss of the screen.
Last couple of apps I downloaded were CompassX and a charging app that shows charging progress while charging.
Glad to have the watch face back.

I'm having the same problem as you. The ambient mode won't come on. Instead of dimming to ambient mode it now just goes dark completely (like when it is charging). I would love another fix before I have to reset the watch. Any ideas?

2leaponover1 said:
I'm having the same problem as you. The ambient mode won't come on. Instead of dimming to ambient mode it now just goes dark completely (like when it is charging). I would love another fix before I have to reset the watch. Any ideas?
Click to expand...
Click to collapse
Bumping this. I reset the watch. Went about two weeks and now back to the same problem. Ambient mode has disappeared. It's just black all the time until i turn it back on.

2leaponover1 said:
Bumping this. I reset the watch. Went about two weeks and now back to the same problem. Ambient mode has disappeared. It's just black all the time until i turn it back on.
Click to expand...
Click to collapse
The user support for this watch is non-existent Still no help with this problem

2leaponover1 said:
The user support for this watch is non-existent Still no help with this problem
Click to expand...
Click to collapse
I confirm that I have this trouble also in normal use, previously it worked fine and would stay on all the time if that's what I wanted.
Am very tempted to reset the watch after backing up.

I have nearly the same problem. For months now, when my screen dims, it goes to a very dark/dim red. I've removed all programs from my phone and did a factory reset on the watch three times. I'm not sure what else to try. Is there a way to flash the memory? It seems like a setting is stuck in the non-volatile memory.

I was having the same problem and found that I had theater mode set on. Switched to off and now works great.
Sent from my Nexus 6 using Tapatalk

Check your theater mode setting.
Turning mine off worked.

extrabilly said:
Anyone else having this issue?
Click to expand...
Click to collapse
I'm experiencing the same. On my watch it seems to be somehow related to accelometer. Almost everytime, when using LG G Watch R in golfing, it starts to shut down the screen. It doesn't wakeup even when tapping the screen.
I haven't found other solution than resetting the device

Same issue with 5.1.1
I had this issue with 5.0.2 and hoped that the next update would solve it but sadly it persists in 5.1.1 .
Theatre mode is off, Always on is on but still the screen blanks, showing the ambient mode screen briefly before blanking.
I've reset multiple times, occasionally Always On comes back but only for a short while.
Always on is a feature I really like

Fixed it on mine
I had to turn wrist gestures on. With it off screen on doesn't work.

I have the exact problem on my GWAR, software version 5.1.1. I bought my in December and it never happened until now. It started happening yesterday all of a sudden. I tried factory reseting it through bootloader, throught settings, uninstalling the Wear app, uninstalling the watchface i was using, and still nothing.
Here is what I did to fix it (and i know its overkill): Uninstall Wear app, clear google play services data and reset the device through settings. Now it's finaly working.