Related
dear all
i have tried everything and i think i bricked my phone.
my phone have no iemi number and the firmware info are :
PDA : I9000JPJPG
Phone : Unknown
CSC : I9000OJPJPF
Odin wont recognize the download mode so i cant flash stock rom
the problem is the phone wont recognize the simcard , everything else is normal.
i have clockworkmod recovery, tried flashing different roms and radios still nothing. it also gives me baseband unkown. what should i do???
the problem is the phone wont recognize the simcard , everything else is normal.
Is that due to you installing a rom that does not have your network
in which case in the settings manually add your Networks details apn etc .
jje
Try see if your clockwordmod has any backups? Usually when doing changes it does make a full system backup..
If so, try restore from there, it should also restore imei
Not forgetting your backed up efs folder can be replaced if you did back it up most ignore that faq .
Mine came back with install of a new rom .
jje
areenchem said:
dear all
i have tried everything and i think i bricked my phone.
my phone have no iemi number and the firmware info are :
PDA : I9000JPJPG
Phone : Unknown
CSC : I9000OJPJPF
Odin wont recognize the download mode so i cant flash stock rom
the problem is the phone wont recognize the simcard , everything else is normal.
i have clockworkmod recovery, tried flashing different roms and radios still nothing. it also gives me baseband unkown. what should i do???
Click to expand...
Click to collapse
I had the same thing, I had to use the 3 button method and used Odin but remember that you have to have Odin running before you connect your phone to your USB connection and you should also have your phone in Download mode using the 3 button method before connecting it to your USB connection. Otherwise Odin won't recognise it, Also you need to make sure you have the phone drivers on you PC.
I just downloaded a stock firmware from samfirmware.com and that installed brought it back to how it was when I bought it. (Fully functional) and then I tried again with rooting it and lagfixing it. works fine.
The reason why mine died in the first place was because I didn't wait long enough on the first boot after the flash and I had thought it had frozen when it was really still just writing new information to the hardware so remember to be patient on the first boot after the flash.
It seems your phone Modem part is not flashed properly thus you could not retreive the IMEI from this part.
Suggestion:
Try to locate the original ROM which comes with this phone and flash it again and check if this works. From this start from zero
Couldn't you flash the modem via clockworktecovery if odin doesn't work? Much more simple if the missing modem is the problem. Modems can be found via docs thread.
Sent from my GT-I9000 using XDA App
lost IMEI
If you are not even getting Odin to connect to your phone, your bootloader must be corrupted. If the phone can get into APX mode, you can flash new bootloader and start off from there.
Connect device to Windows PC and see if Windows would detect the device to start with
Hi everyone
So here it is : No program is able to recognize/detect my Galaxy S i9000M (Bell Vibrant) when it's in download mode, so I can't flash any ROM. My phone is currently fully bricked and unusable. I cannot access to the recovery mode with the three-button thingy or by "adb reboot recovery"
I bricked using Odin 1.8, trying to flash a 2.2 froyo stock ROM from Samfirmware. The flashing went ok, but it failed to reboot. Actually, the screen was turned off and nothing was happening. I figured out it was fully bricked so I made a USB JIG, it worked. I can access my download mode.
I connected the phone to my Windows 7 computer and used Odin to flash back to 2.1 Eclair, with a stock ROM from Samfirmware. It failed (I don't remember the error message, it was a couple days ago...).
I tried with Heimdall Frontened. It had a problem uploading the .pit file, so the flashing didn't work.
Now each time i connect the phone to my computer, Windows (and Heimdall frontened and Odin) doesn't detect it,which means that I can't flash anything on it even though it is in download mode.
I have tried reinstalling like every driver on earth, still not responding.
I tried on another Windows 7 machine and on Ubuntu, the device is not detected.
I tried with different USB cables, nothing happens.
This is my hypothesis (maybe silly) : Could the problem be the Download mode being corrupted?
Whatever... I could use some help from you guys.
Thank you,
Sam
I had/have the same problem.
I installed the Samsung Kies and now my computer recognize my phone again.
But I have still no idea what I need to flash to make my phone working.
goldsage said:
I had/have the same problem.
I installed the Samsung Kies and now my computer recognize my phone again.
But I have still no idea what I need to flash to make my phone working.
Click to expand...
Click to collapse
That is strange... I tried installing Kies and it didn't detect the phone. And you could just flash any 2.3 stock ROM with Odin I guess.
Hi, i'm noob in Galaxy Flashing so this is my problem:
I have a Samsung Galaxy S GT-I9000 blocked from italian carrier.
Few times ago i tried to enable 3-buttons download/recovery mode installing Aries_P-SBL.tar.md5 with Odin. The installation finished successfully but the download/recovery mode still didn't work.
After some reboots (where the phone worked right), now the phone stucks in the boot screen (the one with Galaxy S GT-I9000 SAMSUNG).
With the JIG i can enter download mode but my computer can't detect the phone (Windows feels my USB connection but Odin does not detect it).
If i connect the phone to the computer in normal mode (not in download mode, so with stuck screen), Kies can detect the phone but says that it can't talk with phone in this way(like if it was in USB Debug mode).
I Hope someone can help me
Restart your computer>>>Go to task manager and close all Kies applications (I usually have 2 Kies running from startup)>>>Start Odin and select all the files>>>Put your phone into download mode and connect>>>It should be detected now.
If it is still not detected, close odin, disconnect phone. Start Kies go to tools and install drivers. Once this is complete. Close Kies and start from the top of this post...restart...
Solution Is HEIMDALL.....
Here Comes your solution:
You can easily back your phone with Heimdall.
It's a flashtool which is more complicated than ODIN.
If interesting,simply PM me and we will do it.
I'm Here...
Well,first go to here:
http://forum.xda-developers.com/showthread.php?t=755265
Second: Download 7-zip PC software & extract your official md5 firmware to obtain several other files.
Third:Search the web for a Heimdall How-To(if you didn't find,I'll provide You links)
Last:You'll flash the firmware via Heimdall & again your peace of mind will be back.
Try to reflash your phone normaly with another Rom, it should work
peter_dizai said:
Here Comes your solution:
You can easily back your phone with Heimdall.
It's a flashtool which is more complicated than ODIN.
If interesting,simply PM me and we will do it.
Click to expand...
Click to collapse
Sorry, your advice didn't work, Odin still doesn't detect the phone
Try to change the USB port and install ONLY the phone driver -if you don't find you can contact me.
Inviato dal mio GT-I9000 usando Tapatalk
I don't understand, your download mode works?
Sent from my Galaxy S with ICS 4.0.4 (Italy)
he said download mode works but odin cant detect the phone .
Try reinstalling the samsung usb drivers and/or try from another pc and see if it shows the same thing (meaning nothing) .
Hi,
sorry but i tried all the ways, Odin and Heimdall.
I tried Odin on Windows and Heimdall on MacOSX but always they say
"Failed to detect compatible download-mode device."
I'm sure that phone is in download mode
May i install drivers on OSX with Heimdall?
I have not original samsung USB cable, but i think this is not a problem
Rooted my GT-I9000, and now it has crashed!
First off all my Galaxy I9000 was trying to software update via Kies, and it failed. The it would not start, but i managde to root it with a stock "VOD" rom.. But after a while i wantet to root it back to "Nordic Version"... But i could not do this, because the 3 button combo dont work on my Galaxy I9000 anymore.. :/ So there for i baought a USB JTAG, that puts it into download mode. So far, So good But when it is finished rooting, it fails to mount/unmount a bunch of stuff.. I have a picture of the screen, so that you guys can se what the problem is. I have tryed to root it with the same version that worked before, but it dont work. I have also tryed with som pit files, and so on... I give up, i need help with my Samsung Galaxy S - GT-i9000. Please help me out with this..
Getting Hopeless...?
1)For you to become sure,my Galaxy S Aka I9000 was exactly the same as yours and right now there is nothing wrong with that of course after flashing by HEIMDALL.
2)Remember,if your are going to do anything,Your first and your last key,is your HOPE so be so hopeful and let's start to get over this.
3)Download I9000 USB driver from here and simply install it on WINDOWS OS.
http://hotfile.com/dl/48893334/93383a1/I9000_USB_driver.rar.html
4)Before Using Heimdall, Enter it's folder and you'll see another sub folder called driver and you'll see just ONE executable program,run it and follow these instructions:
(I'll Shortly Provide You A How-to)
5)Enter Heimdall and follow these instructions:
(I'll Shortly Provide You A How-to)
6)Flash firmware
7)Enjoy
8)Press my THX Button.
---------- Post added at 01:15 AM ---------- Previous post was at 01:07 AM ----------
Ghoststavanger said:
First off all my Galaxy I9000 was trying to software update via Kies, and it failed. The it would not start, but i managde to root it with a stock "VOD" rom.. But after a while i wantet to root it back to "Nordic Version"... But i could not do this, because the 3 button combo dont work on my Galaxy I9000 anymore.. :/ So there for i baought a USB JTAG, that puts it into download mode. So far, So good But when it is finished rooting, it fails to mount/unmount a bunch of stuff.. I have a picture of the screen, so that you guys can se what the problem is. I have tryed to root it with the same version that worked before, but it dont work. I have also tryed with som pit files, and so on... I give up, i need help with my Samsung Galaxy S - GT-i9000. Please help me out with this..
Click to expand...
Click to collapse
Ok,Right now I'm here and you are so damn lucky.
1-Simply put your phone into download mode with your cable.
2-Change your cable with an standard Samsung cable.
3-Download a stock firmware which contains 3 files(PDA,Phone,CSC)
4-Load Odin and flash the firmware.
5-All Done,How lucky Your Are.....
6-Feel Free to hit my THANX...
peter_dizai said:
Well,first go to here:
http://forum.xda-developers.com/showthread.php?t=755265
Second: Download 7-zip PC software & extract your official md5 firmware to obtain several other files.
Third:Search the web for a Heimdall How-To(if you didn't find,I'll provide You links)
Last:You'll flash the firmware via Heimdall & again your peace of mind will be back.
Click to expand...
Click to collapse
I tried your method but heimdall says that it can not find a connected download-mode device. My device is in download mode, i put it in this mode with JIG
Hi, excuse my for my stupid question,
there are problem in flashing with non original Samsung USB cable? Isn't it the same with any Micro USB adapter??
espinho said:
Hi, excuse my for my stupid question,
there are problem in flashing with non original Samsung USB cable? Isn't it the same with any Micro USB adapter??
Click to expand...
Click to collapse
generally no, but I recommend strongly to try another micro USB-Cable & another USB Port!
No one of these method does work for me,
any suggest?? my main problem is that the pc does not detect the phone when it's in download-mode. I know how to flash it, but there is not a program that can talk with it!
Can you try to make the operation on another computer?-install usb driver first...
Sent from my Galaxy S with ICS 4.0.4 (Italy)
mrchat9 said:
Can you try to make the operation on another computer?-install usb driver first...
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Click to expand...
Click to collapse
i'll try and i'll make you know
At this time maybe an operating system problem...I'm waiting for your answer!
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Solved
mrchat9 said:
At this time maybe an operating system problem...I'm waiting for your answer!
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Click to expand...
Click to collapse
Hi, changing computer worked. I tried on OSX and didn't work, on Windows 7 on VMware Fusion and didn't work. After all, i tried on a laptop with Windows XP and it solved my problem. Now i get a mobile network error, with one carrier it works and with another it does not. The mobile network detected is always really low.
Hello.
I recently installed CM10.1.3 on my GT-I9000 running stock GB. I did everything according to the instructions (though, mind you, this was not my first time installing a ROM just the first time on this device).
When I booted and tried to set up a CM account it gave me a message saying "Insert SIM card". I tried installing the kernel again, as well as installing other ROMs (AOKP mostly).
Nothing seems to work. It will simply not recognize my SIM.
Any suggestions?
Thanks!
Tal
LaDjA said:
just the first time on this device).
Click to expand...
Click to collapse
since its the first time on this device, can you check IF sim card is inserted in the correct direction
Check this out! You , YES! you are an " Android ". Not your phone but U.
Yes. It is.
Might be also worth mentioning that I tried it with a few different cards, all of which work with other devices, and not with this one.
LaDjA said:
Yes. It is.
Might be also worth mentioning that I tried it with a few different cards, all of which work with other devices, and not with this one.
Click to expand...
Click to collapse
you can try taking it back to stock ROM , you can follow this but it sounds like you may have hardware problem, if that fails as sim contacts can get broken or damaged too and can be replaced. so best to test with Stock ROM to check if its a software or hardware problem. also try to flash without SIM card and insert after flashing and first boot.
Check this out! You , YES! you are an " Android ". Not your phone but U.
LaDjA said:
Hello.
I recently installed CM10.1.3 on my GT-I9000 running stock GB. I did everything according to the instructions (though, mind you, this was not my first time installing a ROM just the first time on this device).
When I booted and tried to set up a CM account it gave me a message saying "Insert SIM card". I tried installing the kernel again, as well as installing other ROMs (AOKP mostly).
Nothing seems to work. It will simply not recognize my SIM.
Any suggestions?
Thanks!
Tal
Click to expand...
Click to collapse
For a clean install and root, flash JVU ROM and its CF_root, as it is easy and problem free. I never had any problem with JVU
The whole procedure is given below
FLASHING JVU ROM WITH ODIN v1.85:
1. Install USB drivers for i9000 on PC (ignore if already installed) and restart computer to take effect
2. Turn off your phone and put it in download mode
by holding VOL DOWN+MENU+POWER
Do you get the Yellow Triangle?..If so
continue..if not do it again...
3. Plug in Phone with USB Cable To Computer.
4. In ID:COM it should go yellow and you should see
ADDED in the message box
5. Check Re-Partition option and then Click PIT
button to select: s1_odin_20100xxx.pit file.
6. Click PDA button and select :
CODE_I9000XXJVU_xxxxx.tar
7. Click PHONE button and select:
MODEM_I9000XXJVU_xxxxx.tar
8. Click CSC button and select:
GT-I9000-CSC-MULTI-OXAJVU.tar
9. When you have all the files needed in ODIN,
Click Start and let it Run
10. Once complete you will see S logo on phone
(computer will make a few noises like connect/
disconnecting
11.Unplug the Cable to the Phone
You will see your phone working excellent. Now it's time for rooting
Procedure for rooting:
1. Power Off Phone
2. Download CF-Root kernel first.
Unzip the file to a folder. You
will get the .tar file – CF-Root-
XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.tar
— inside the extracted folder. DO NOT extract
the .tar file (even if you see it as a zip
file, which it is not). You need to flash
the .tar file using Odin to gain root
access and install the ClockworkMod
Recovery (CWM) alongside. If you’re
getting zimage file, it means you’ve
extracted the .tar file too! — and that’s
not a right thing to do.
3. Boot your phone in Download Mode —
Press and hold volume down+HOME
+POWER keys together.
4. Open Odin now. Connect your phone to PC now. You’ll notice “Added! !” message in the Odin’s message box in the bottom left.
5. On Odin, click the PDA tab and select the .tar file you got in step 2 — CF-Root-XX_OXA_JVU_2.3.6-v4.3-
CWM3RFS.tar
6. Make sure “Re-Partition” checkbox is not selected. Leave the “Auto Reboot” and “F. Reset Time” checkboxes selected.
7. Click the Start button on Odin to flash the CF-Root kernel. After the CF Root is installed, phone will restart automatically. When you see the PASS written in top left box, you can remove the cable.
8. Your phone is rooted now. That surperuser app is there! The CWM app is also there, and
clockworkmod based recovery has
been installed too. Now you enter the custom ROM world without worries. Enjoy!
PIT File DOWNLOAD Iink: www.mediafire.com/download/v2rub40k1bvccj4/s1_odin_20100512.pit
ODIN 1.85 download link:
www.mediafire.com/download/82latn22s1kl7w2/andromint-Odin3-v1.85.zip
XXJVU Download link:
(password: samfirmware.com)
hotfile.com/dl/140301534/be8872c/I9000XXJVU_I9000OXAJVU_OXA.rar.html
CF_root download link:
download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
If you don't have USB drivers, then download below
Samsung USB drivers:
www.mediafire.com/?hzlnda0l5t8qyes
xsenman said:
it sounds like you may have hardware problem, if that fails as sim contacts can get broken or damaged too and can be replaced.
Click to expand...
Click to collapse
But the hardware was functioning perfectly well before I flashed. Why would flashing a ROM damage my SIM contacts? (or any hardware, for that matter)?
xsenman said:
you can try taking it back to stock ROM , you can follow this
Click to expand...
Click to collapse
In this guide, when I am trying to download the PIT file, it wants me to log in with my google\facebook account. Something about that smells fishy. Are you sure it's reliable enough? Alternatively - could you provide a different download link for the file?
Rohitdahiya said:
XXJVU Download link:
(password: samfirmware.com)
hotfile.com/dl/140301534/be8872c/I9000XXJVU_I9000OXAJVU_OXA.rar.html
Click to expand...
Click to collapse
The password doesn't match, or so peazip says. I can't get the file to extract.
Thank a lot, guys, for all your efforts.
LaDjA said:
But the hardware was functioning perfectly well before I flashed. Why would flashing a ROM damage my SIM contacts? (or any hardware, for that matter)? In this guide, when I am trying to download the PIT file, it wants me to log in with my google\facebook account. Something about that smells fishy. Are you sure it's reliable enough? Alternatively - could you provide a different download link for the file?
Click to expand...
Click to collapse
I assume you have a software issue, that's why I asked you to revert to Stock ROM after you confirmed the SIM card was not inserted the wrong way round. , only IF the sock ROM also gave you that result than you need to consider hardware, as I have not heard of anyone having this issue after flashing CM 10.
AS for PIT file its in 4Shared site, all they would require is you should be a member and register with them ( you can do that with any name and password) the ROM site is FileRio, there you should only use free download button , clicked a number of times ( same button) for download to begin, both uploads were by me, so its virus free. I will upload pit file to the thread asap as its very small file.
EDIT: already uploaded PIT File to thread uploaded 3 PIT files in a package used for i9000, only use 512
Check this out! You , YES! you are an " Android ". Not your phone but U.
Hey. Thanks again.
One more problem, and it's a big one:
Odin won't respond to my device. No yellow rectangle, or any kind of response...
What can I do to make it realize that it's there?
LaDjA said:
Hey. Thanks again.
One more problem, and it's a big one:
Odin won't respond to my device. No yellow rectangle, or any kind of response...
What can I do to make it realize that it's there?
Click to expand...
Click to collapse
the guide to solve such problems is right on top (begining) of that thread
Note:- It's assumed that you can and know how to connect your Phone to PC with USB cable . If you do not know, first install Samsung USB drivers on your PC/Laptop, than enable USB debugging on your phone by settings menu>Developer options> tick USB Debugging. After this use only Samsung USB cable and plug it into your phone micro USB port and to your PC USB Port. ( Always use the Back USB port on PC as some ports may not connect well enough for flashing ROM's. )
If unable to connect your phone to PC for any reason, refer to this guide
Click to expand...
Click to collapse
Check this out! You , YES! you are an " Android ". Not your phone but U.
I tried everything in that guide, and it still the same.
Might be worth noting that the computer totally does recognize the device. I mean, I can access the internal SD from the computer, when the phone is on. It's just that when I connect it in download mode, Odin doesn't respond.
Might also be worth to stress that I used Heimdall to flash the recovery, when I did it. Could it be related to why I can't use Odin now?
And another thing regarding my main issue - could the "Insert SIM" message be a modem thing?
The password for XXJVU is samfirmware.com
If you are still unable to open this, then download XXJVU by Google searching and then try. This is the best way to get rid of the problem.
If you are able to go to download mode, install USB drivers for Samsung and restart PC . Now exit the Kies program and its related services from your PC. If you are using windows, you may find the tray icon and exit by right clicking. Now run Odin and flash.
If you are not able to go to download mode then search "homemade usb jig" and use the jig method described in those threads.
I'm trying to download the XXJVU again. Will see how goes.
I am able to go to download mode. So that's not it. I also don't have Kies installed on my computer, so that's also not it. I installed a few different Samsung drivers, and did the whole process a few times. The computer always recognizes the phone, but Odin doesn't.
I don't get why I can't delete stuff, if I accidentally posted twice. Anyway - feel free to disregard this one. Sorry for spamming..
OK. Managed to open the XXJVU.
Still have the problem with Odin not paying attention to my phone being there. Do you think it might be a problem with dl mode, that I should try fix with a jig (the phone does act LIKE it in dl mode - yellow triangle and all...)?
LaDjA said:
OK. Managed to open the XXJVU.
Still have the problem with Odin not paying attention to my phone being there. Do you think it might be a problem with dl mode, that I should try fix with a jig (the phone does act LIKE it in dl mode - yellow triangle and all...)?
Click to expand...
Click to collapse
You seem to be having strange problems. I assume you pressed the correct combo keys ( as shown in image on that thread) and you did not get download mode ( this could be due to ) you don't have an i9000 but a different version of Galaxy S? or your keys are not functioning or you have a wrong bootloader
so use this methods & tool from PC to boot into download mode after you are sure you have an i9000 international version by checking under the battery. just to give you an idea , read this
Odin will only connect when phone is in Download mode, so as you mentioned you have NO problem with drivers and PC, its only your phone not being able to enter download mode.
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
You seem to be having strange problems. I assume you pressed the correct combo keys ( as shown in image on that thread) and you did not get download mode ( this could be due to ) you don't have an i9000 but a different version of Galaxy S? or your keys are not functioning or you have a wrong bootloader
Click to expand...
Click to collapse
You assume correctly - I did use the correct combo. And the battery says I have an GT-I9000. I think that's only the int'l version, isn't it?
xsenman said:
so use this methods & tool from PC to boot into download mode after you are sure you have an i9000 international version by checking under the battery. just to give you an idea , read this
Odin will only connect when phone is in Download mode, so as you mentioned you have NO problem with drivers and PC, its only your phone not being able to enter download mode.
Click to expand...
Click to collapse
I will try the ADB solution tomorrow. But doesn't the fact that the phone displays the download mode screen say that it is indeed in that mode? (because it does display it, as I mentioned above). I mean - is it possible that the phone seems like it is in download mode, when it's actually not?
Thanks!
LaDjA said:
. But doesn't the fact that the phone displays the download mode screen say that it is indeed in that mode? (because it does display it, as I mentioned above). I mean - is it possible that the phone seems like it is in download mode, when it's actually not?
Click to expand...
Click to collapse
hmm, i got the impression that you are not getting the download mode display , if it does than it is in download mode, so now you need to check your Odin3 download, what version are you using , try and download again and always use fresh Odin3, meaning, if it had a problem or even when no problem restart it a fresh. And best install Samsung USB drivers again ( link on that thread), if that did not solve it.
Check this out! You , YES! you are an " Android ". Not your phone but U.
I tried both versions that from here (i.e. v1.83 and v1.85). I'm not really doing anything else with Odin, so there's nothing to restart.
I also tried uninstalling and installing the drivers a few times, using a few different installation files, and by letting windows figure out on its own which drivers to install.
Non of it changed the result.
LaDjA said:
I tried both versions that from here (i.e. v1.83 and v1.85). I'm not really doing anything else with Odin, so there's nothing to restart.
I also tried uninstalling and installing the drivers a few times, using a few different installation files, and by letting windows figure out on its own which drivers to install.
Non of it changed the result.
Click to expand...
Click to collapse
this is weird, anyway since heimdall is possible, right? try and download a heimdall rescue kit from MY Android collections and try flashing , if the phone boots you can also install Mobile Odin from playstore to flash stock ROM too.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Hi,
my Note 9 started having some signal issues on 3G and LTE network since Android 10 and I wanted to solve this problem by installing an Android Pie firmware but it didn't work, so I've decided to install a custom ROM from Dr.Ketan and I was following the instructions from a YT video and I think I've mistaken something, because after installing/flashing (I don't know the right word for this) that CP and BL files is Odin it started to reboot but can't and displayed this error when it tried to turn on: kernel rev check fail device 6 binary 5 . I have the stock Android 10 firmware from SAMMOBILE but I can't install it because I can't get to the download mode because as I wrote I can't turn on the phone because of the mentioned error.
So my question is what should I do to fix this problem? If there isn't any solutions for this problem I'll take it to a service but if there is a solution I'll try to fix it for myself.
Can u boot to Download Mode?
muntaha_v3 said:
Can u boot to Download Mode?
Click to expand...
Click to collapse
No, I can't.
You probably was trying to odin earlier version of bootloader over a new one.
Find the latest firmware for your phone in sammobile. Extract BL and flash again.
Even when you turn on the phone and there is whatever error shown just flash it with odin. That should work normally. Or you can flash the whole firmware if you want.
try holding vol down+bixby button and plug in your usb cable to computer ?
Rosli59564 said:
You probably was trying to odin earlier version of bootloader over a new one.
Find the latest firmware for your phone in sammobile. Extract BL and flash again.
Even when you turn on the phone and there is whatever error shown just flash it with odin. That should work normally. Or you can flash the whole firmware if you want.
Click to expand...
Click to collapse
Sadly I'm not able to do it because the phone displays the error for a few seconds and Odin doesn't recognize it :/
lawong said:
try holding vol down+bixby button and plug in your usb cable to computer ?
Click to expand...
Click to collapse
I tried it but it doesn't work. :/
jayfromhungary said:
Hi,
my Note 9 started having some signal issues on 3G and LTE network since Android 10 and I wanted to solve this problem by installing an Android Pie firmware but it didn't work, so I've decided to install a custom ROM from Dr.Ketan and I was following the instructions from a YT video and I think I've mistaken something, because after installing/flashing (I don't know the right word for this) that CP and BL files is Odin it started to reboot but can't and displayed this error when it tried to turn on: kernel rev check fail device 6 binary 5 . I have the stock Android 10 firmware from SAMMOBILE but I can't install it because I can't get to the download mode because as I wrote I can't turn on the phone because of the mentioned error.
So my question is what should I do to fix this problem? If there isn't any solutions for this problem I'll take it to a service but if there is a solution I'll try to fix it for myself.
Click to expand...
Click to collapse
PS: Might it be a hard brick?
jayfromhungary said:
Sadly I'm not able to do it because the phone displays the error for a few seconds and Odin doesn't recognize it :/
Click to expand...
Click to collapse
Phone not detected? You sure it's not usb driver problem? Too bad because whatever the error is, should still be flashable with odin.