Help me with s-off please - One (M7) Q&A, Help & Troubleshooting

Hi i want to s-off my htc one m7 now have cyanogen mod rom it's bootloader unlocked and root-ed i want to install google play edition but i'dont have s-off and how to change cid because with fastboot not working. Thank you for help I have hboot 1.57
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.16.75.5
version-misc: PVT SHIP S-ON
serialno: xxxxxxxxxxxx
imei: xxxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: ORANG309
battery-status: good
battery-voltage: 4315mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0

This is the only solution for you http://theroot.ninja/
But you must install a stock Rom or near stock something like MaximusHD or ARHD. Install them without changing the kernel.
It will cost you 25$.

If you don't wanna pay for sunshine S Off
ARHD + bulletproof kernel + firewater

yatindroid said:
If you don't wanna pay for sunshine S Off
ARHD + bulletproof kernel + firewater
Click to expand...
Click to collapse
Firewater from were?
Have you read later the Firewater webpage? http://firewater-soff.com/

yatindroid said:
If you don't wanna pay for sunshine S Off
ARHD + bulletproof kernel + firewater
Click to expand...
Click to collapse
cyrusct82 said:
Firewater from were?
Have you read later the Firewater webpage? http://firewater-soff.com/
Click to expand...
Click to collapse
Firewater is discontinued, the only option available for hboot 1.57 is sunshine.
Anyway the OP ( @MariusAdonis ) already knows that and how to convert to GPE, I spent some time explaining him in this thread
so consider this one as a duplicated thread. Well its the 3rd thread asking how to install GPE, another one here
---------- Post added at 12:07 PM ---------- Previous post was at 11:59 AM ----------
MariusAdonis said:
(...)how to change cid because with fastboot not working(...)
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.16.75.5
version-misc: PVT SHIP S-ON
serialno: xxxxxxxxxxxx
imei: xxxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: ORANG309
battery-status: good
battery-voltage: 4315mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
So fastboot isn't working but "fastboot getvar all" is working ?

I have picture with the problem..
alray said:
Firewater is discontinued, the only option available for hboot 1.57 is sunshine.
Anyway the OP ( @MariusAdonis ) already knows that and how to convert to GPE, I spent some time explaining him in this thread
so consider this one as a duplicated thread. Well its the 3rd thread asking how to install GPE, another one here
---------- Post added at 12:07 PM ---------- Previous post was at 11:59 AM ----------
So fastboot isn't working but "fastboot getvar all" is working ?
Click to expand...
Click to collapse
Here it's the problem...i writed fastboot oem writecid AN IT'S SHOW ME ERROR..i have picture to show you

MariusAdonis said:
Here it's the problem...i writed fastboot oem writecid AN IT'S SHOW ME ERROR..i have picture to show you
Click to expand...
Click to collapse
Because you need s-off first. you can't change CID with s-on...
And if your intention is to use the GPE version then use GOOGL001
So like I said in your other thread
achieve s-off
change cid to GOOGL001 and mid to PN0712000
flash the GPE RUU
alray said:
To install the GPE version you will first need to s-off using sunshine
then change your MID to PN0712000, your CID to GOOGL01 and flash the GPE RUU (can be found in the dev sub forum).
.
Click to expand...
Click to collapse

just use Sunshine. it works awesome. I've used it for a few 1.57 HTC ones. I think its really worth the lack of aggravation that it provides.

Related

[Q] Google CID, S-ON

Hello,
I've made a mistake. While trying to convert my HTC One to Google Edition, I've mistakenly turned S-ON.
The OS was running fine before it was S-ON. Now it boots up to Homescreen and reboots immediately.
The CID is the one from Google Edition. So I can't flash any RUU's.
I can lock and unlock the Bootloader, or flash another Recovery etc.
But since the OS keep rebooting I cant use ADB and turn S OFF.
missgestalt said:
Hello,
I've made a mistake. While trying to convert my HTC One to Google Edition, I've mistakenly turned S-ON.
The OS was running fine before it was S-ON. Now it boots up to Homescreen and reboots immediately.
The CID is the one from Google Edition. So I can't flash any RUU's.
I can lock and unlock the Bootloader, or flash another Recovery etc.
But since the OS keep rebooting I cant use ADB and turn S OFF.
Click to expand...
Click to collapse
" I've mistakenly turned S-ON." -> why, oh why?? dont you realize that's a one way ticket??
Anyway, are you saying you are able to UNLOCK bootloader, if so there may be hope: Unlock bootloader and use rumrunner to get s-off (AND STAY S-OFF)
missgestalt said:
Hello,
I've made a mistake. While trying to convert my HTC One to Google Edition, I've mistakenly turned S-ON.
The OS was running fine before it was S-ON. Now it boots up to Homescreen and reboots immediately.
The CID is the one from Google Edition. So I can't flash any RUU's.
I can lock and unlock the Bootloader, or flash another Recovery etc.
But since the OS keep rebooting I cant use ADB and turn S OFF.
Click to expand...
Click to collapse
Try sideloading another rom via recovery and flashing it..
Sent from my One using Tapatalk
@nkk71
Any way to use rumrunner without a working OS? As I stated above, I don't access to ADB.
@n1234d
I'll try sideloading via custom recovery. Any ROM suggestions?
missgestalt said:
@nkk71
Any way to use rumrunner without a working OS? As I stated above, I don't access to ADB.
@n1234d
I'll try sideloading via custom recovery. Any ROM suggestions?
Click to expand...
Click to collapse
post your "fastboot getvar all" (excluding IMEI and s/n)
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main: 3.62.1700.1
version-misc: PVT SHIP S-ON
serialno: ____
imei: _____
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: GOOGL001
battery-status: good
battery-voltage: 4307mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-0e82187e
hbootpreupdate: 11
gencheckpt: 0
missgestalt said:
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main: 3.62.1700.1
version-misc: PVT SHIP S-ON
serialno: ____
imei: _____
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: GOOGL001
battery-status: good
battery-voltage: 4307mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-0e82187e
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
try installing a custom ROM for 3.62, such as ARHD 31.6 (rooted & unsecured kernel) and get S-Off using rumrunner.
(you may have to try different ROMs as you're on GPE hboot & firmware.)
Runs fine with the mentioned ROM. I'll keep it at S-OFF this time. Thank you very much :good:
missgestalt said:
Runs fine with the mentioned ROM. I'll keep it at S-OFF this time. Thank you very much :good:
Click to expand...
Click to collapse
Happy flashing
And keep S-Off, you are lucky you were able to unlock again, lots of people got stuck with unable to unlock again!!
S-Off = "get out of jail"

[Q] Finding the right RUU file for HTC ONE GSM

Hi all,
I've just moved from iPhone to a HTC ONE GSM last week and then I root it and installed Cyanogenmod.
But now I will back to the original setup, can anyone help me find the right RUU file, I've searched for it, but can't figure out what name it should have and where I can find it.
Here is some data for my phone:
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
I'm from Denmark, the phone is a GSM and it's not attached to a supplier.
Hope for your help, regards
Thomas
tlkristiansen said:
Hi all,
I've just moved from iPhone to a HTC ONE GSM last week and then I root it and installed Cyanogenmod.
But now I will back to the original setup, can anyone help me find the right RUU file, I've searched for it, but can't figure out what name it should have and where I can find it.
Here is some data for my phone:
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
I'm from Denmark, the phone is a GSM and it's not attached to a supplier.
Hope for your help, regards
Thomas
Click to expand...
Click to collapse
if you still have the fastboot file from when you unlocked the bootloader
give me the results from fastboot getvar all (-SN and IEMI) and I'll help you look
clsA said:
if you still have the fastboot file from when you unlocked the bootloader
give me the results from fastboot getvar all (-SN and IEMI) and I'll help you look
Click to expand...
Click to collapse
Hi,
I am quite new to android and was unfortunately did not take back up, used the cyanogenmod installer to root it.
Is there any other way?
tlkristiansen said:
Hi,
I am quite new to android and was unfortunately did not take back up, used the cyanogenmod installer to root it.
Is there any other way?
Click to expand...
Click to collapse
as mentioned, you still need to post a "fastboot getvar all" (excluding IMEI and s/n)
Copy from "fastboot getvar all"
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-microp: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4076mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Can it be one of those files I should use?
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13. 3227.06_10.27.1127.01_release_308001_signed_2_4.exe
tlkristiansen said:
Copy from "fastboot getvar all"
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-main: 4.19.401.8
version-misc: PVT SHIP S-ON
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__Y13
gencheckpt: 0
Click to expand...
Click to collapse
if you want to go back to 100% stock you will need to S-Off your phone,
so either
1- S-Off your phone, and follow my guide http://forum.xda-developers.com/showthread.php?t=2541082 (S-On is NOT recommended unless you're returning for warranty)
2- stay S-On and use a custom kernel, if you want stock Sense 5.5 (Android 4.4.2), you can try out ARHD 51.0 (very close to stock), or any other custom ROMs (or even stock ROM)
(check @ClydeB1's index thread in my signature for different ROMs)
3- get S-Off anyway, and flash whatever you want
If you decide to use my guide to go back to "out of the box", then post your "fastboot getvar all" in my thread and I'll let you know which files to use.
---------- Post added at 07:47 PM ---------- Previous post was at 07:45 PM ----------
tlkristiansen said:
Can it be one of those files I should use?
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13. 3227.06_10.27.1127.01_release_308001_signed_2_4.exe
Click to expand...
Click to collapse
Please do not use 1.20.401.1, it seems to be some kind of "pre-release" as it contains hboot 1.43, and the lowest ship version is supposed to be 1.44 AFAIK.
also using ruu.zip method has become my recommended method due to various issues.

Some help with s-off

I have flashed my One with CMinstaller, but it's still s-on.
Flashed from CM to Android Revolution HD 53.0 and tried to get s-off with Rumrunner, but no luck.
Pouring 8 times "Wait 30 seconds, power on device, pray, run rumrunner again."
So no luck, what to do?
Ronnymes said:
I have flashed my One with CMinstaller, but it's still s-on.
Flashed from CM to Android Revolution HD 53.0 and tried to get s-off with Rumrunner, but no luck.
Pouring 8 times "Wait 30 seconds, power on device, pray, run rumrunner again."
So no luck, what to do?
Click to expand...
Click to collapse
Use the arhd version that match your firmware version, You can find with a ''fastboot gatvar all''.
what is your hboot version?
alray said:
Use the arhd version that match your firmware version, You can find with a ''fastboot gatvar all''.
what is your hboot version?
Click to expand...
Click to collapse
fastboot getvar all
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.25.3263.21
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: SH00000000
imei: 000000000000
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__E11
battery-status: good
battery-voltage: 4304mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Ronnymes said:
fastboot getvar all
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.25.3263.21
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: SH00000000
imei: 000000000000
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__E11
battery-status: good
battery-voltage: 4304mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Having a major problem myself, support over for firewater/rumrunner said some devices are just different and they are trying to get one to test
alray said:
Use the arhd version that match your firmware version, You can find with a ''fastboot gatvar all''.
what is your hboot version?
Click to expand...
Click to collapse
The arhd version?
Ronnymes said:
The arhd version?
Click to expand...
Click to collapse
you are on hboot 1.56, many user reported to be unable to s-off on that verson. Refer to the ''hboot 1.56 s-off'' thread in the Q&A
alray said:
you are on hboot 1.56, many user reported to be unable to s-off on that verson. Refer to the ''hboot 1.56 s-off'' thread in the Q&A
Click to expand...
Click to collapse
So I can't revert to stock without the tamperd logo..
Thats f#ckt up, but thnx for helping me

[Q] Need RUU m7

Guys please help this is urgent.
I followed the instructions on a website and relocked my bootloader. But then when it came the time to run the RUU,Ii had downloaded the wrong RUU file. I have been on the search for the correct one but I cant find it and so i am stuck in fastboot (I cant even boot to recovery).
I am on an international m7 variant and here is the info. from the fastboot screen:
HBOOT-1.56.0000
RADIO-4A.21.3263.04
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Please help as this is urgent (and I am a beginner-ish in this as i used to own a Samsung device).
Thanks in advance.:good:
mousaalwaraki said:
Guys please help this is urgent.
I followed the instructions on a website and relocked my bootloader. But then when it came the time to run the RUU,Ii had downloaded the wrong RUU file. I have been on the search for the correct one but I cant find it and so i am stuck in fastboot (I cant even boot to recovery).
I am on an international m7 variant and here is the info. from the fastboot screen:
HBOOT-1.56.0000
RADIO-4A.21.3263.04
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Please help as this is urgent (and I am a beginner-ish in this as i used to own a Samsung device).
Thanks in advance.:good:
Click to expand...
Click to collapse
post the output of "fastboot getvar all" minus your imei and serialno
and remember to post in the "Q&A" sub forum next time, not in general.
alray said:
post the output of "fastboot getvar all" minus your imei and serialno
and remember to post in the "Q&A" sub forum next time, not in general.
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__J15
battery-status: good
battery-voltage: 3844mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-c6bbb6d4
hbootpreupdate: 11
gencheckpt: 0
Here it is and sorry as i said i am a beginner
mousaalwaraki said:
I am on an international m7 variant and here is the info. from the fastboot screen:
Click to expand...
Click to collapse
mousaalwaraki said:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__J15
battery-status: good
battery-voltage: 3844mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-c6bbb6d4
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
This is no the international variant btw. International variant is M7_UL PN0710000 not M7_U PN0711000.
There is only one RUU for this variant but its an old version and will require S-OFF to be flashed.
You have two option: re-unlock your bootloader and flash a custom rom
or
re-unlock your bootloader, flash a custom rom, achieve s-off and flash this RUU: http://www.htc1guru.com/dld/ruu-zip...0-01_release_311663_signed_2_4_decrypted-zip/
I have tried to achieve s-off for a while now using rumrunner but it never works, there is always some kind of different error.
mousaalwaraki said:
I have tried to achieve s-off for a while now using rumrunner but it never works, there is always some kind of different error.
Click to expand...
Click to collapse
your hboot is to high for RumRunner you have to Pay for Sunshine s-off
clsA said:
your hboot is to high for RumRunner you have to Pay for Sunshine s-off
Click to expand...
Click to collapse
Is there no other way than sunshine. Because i have heard its $25 and thats a bit too high for me tbh.
mousaalwaraki said:
Is there no other way than sunshine. Because i have heard its $25 and thats a bit too high for me tbh.
Click to expand...
Click to collapse
No thats it .. and it's well worth it. Just so you know All the HTC One M8 have to use this and everyone will tell you it is worth it.
clsA said:
No thats it .. and it's well worth it. Just so you know All the HTC One M8 have to use this and everyone will tell you it is worth it.
Click to expand...
Click to collapse
Oh well thanks guys i would try my best to get it i guess.

Help finding the correct RUU.exe?

Hi everyone! I'm trying to go back to stock on my htc m7 following this guide http://forum.xda-developers.com/showthread.php?t=2281365 , but I'm having some issues to find the proper RUU.exe. I have run the getvar command and found out my cid: HTC__405 and modelID: PN0710000 but I'm not sure which is the correct RUU from this page http://forum.xda-developers.com/showthread.php?t=2207874 . Would anyone be so kind to link me the correct one please?
Below I leave my details: version: 0.5
version-bootloader: 1.61.0000
version-baseband: 4T.35.3218.16
version-cpld: None
version-microp: None
version-main: 7.19.401.30
version-misc: PVT SHIP S-ON
serialno: HT3AMW9A1594
imei: 354436057972406
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__405
battery-status: good
battery-voltage: 4286mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-0e2a13e5
hbootpreupdate: 11
gencheckpt: 0
Thanks in advance to all!
djcolomb said:
Hi everyone! I'm trying to go back to stock on my htc m7 following this guide http://forum.xda-developers.com/showthread.php?t=2281365 , but I'm having some issues to find the proper RUU.exe. I have run the getvar command and found out my cid: HTC__405 and modelID: PN0710000 but I'm not sure which is the correct RUU from this page http://forum.xda-developers.com/showthread.php?t=2207874 . Would anyone be so kind to link me the correct one please?
Below I leave my details: version: 0.5
version-bootloader: 1.61.0000
version-baseband: 4T.35.3218.16
version-cpld: None
version-microp: None
version-main: 7.19.401.30
version-misc: PVT SHIP S-ON
serialno: HT3AMW9A1594
imei: 354436057972406
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__405
battery-status: good
battery-voltage: 4286mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-0e2a13e5
hbootpreupdate: 11
gencheckpt: 0
Thanks in advance to all!
Click to expand...
Click to collapse
You can use the 7.19.401.2 from this thread. BUT you will have to do the "downgrade for s-on" (bottom of 2nd page) to set your mid to .2 first.
I think the .22 ruu should also work for you, after the downgrade. But the example is exactly your device so may be easier to follow.
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Thanks for your answers! I haven't understood what you mean by downgrade for s-on! You mean getting s-off? I can't find anything about changin mid to 0.2 on the second page of both the guides mentioned...Do I miss anything? I'm sorry if I can't understand!!
mb_guy said:
You can use the 7.19.401.2 from this thread. BUT you will have to do the "downgrade for s-on" (bottom of 2nd page) to set your mid to .2 first.
I think the .22 ruu should also work for you, after the downgrade. But the example is exactly your device so may be easier to follow.
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Click to expand...
Click to collapse
djcolomb said:
Thanks for your answers! I haven't understood what you mean by downgrade for s-on! You mean getting s-off? I can't find anything about changin mid to 0.2 on the second page of both the guides mentioned...Do I miss anything? I'm sorry if I can't understand!!
Click to expand...
Click to collapse
You don't need S-OFF just follow the guide at the end of post 2 to downgrade your version-main number (not the mid) to 7.19.401.2 so you can either flash the 7.19.401.2 or 7.19.401.22 ruu.zip posted in that thread.
Thank you, It worked just fine by following your suggestions!! Thank you so much!!

Categories

Resources