Hi all,
I've just moved from iPhone to a HTC ONE GSM last week and then I root it and installed Cyanogenmod.
But now I will back to the original setup, can anyone help me find the right RUU file, I've searched for it, but can't figure out what name it should have and where I can find it.
Here is some data for my phone:
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
I'm from Denmark, the phone is a GSM and it's not attached to a supplier.
Hope for your help, regards
Thomas
tlkristiansen said:
Hi all,
I've just moved from iPhone to a HTC ONE GSM last week and then I root it and installed Cyanogenmod.
But now I will back to the original setup, can anyone help me find the right RUU file, I've searched for it, but can't figure out what name it should have and where I can find it.
Here is some data for my phone:
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
I'm from Denmark, the phone is a GSM and it's not attached to a supplier.
Hope for your help, regards
Thomas
Click to expand...
Click to collapse
if you still have the fastboot file from when you unlocked the bootloader
give me the results from fastboot getvar all (-SN and IEMI) and I'll help you look
clsA said:
if you still have the fastboot file from when you unlocked the bootloader
give me the results from fastboot getvar all (-SN and IEMI) and I'll help you look
Click to expand...
Click to collapse
Hi,
I am quite new to android and was unfortunately did not take back up, used the cyanogenmod installer to root it.
Is there any other way?
tlkristiansen said:
Hi,
I am quite new to android and was unfortunately did not take back up, used the cyanogenmod installer to root it.
Is there any other way?
Click to expand...
Click to collapse
as mentioned, you still need to post a "fastboot getvar all" (excluding IMEI and s/n)
Copy from "fastboot getvar all"
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-microp: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4076mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Can it be one of those files I should use?
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13. 3227.06_10.27.1127.01_release_308001_signed_2_4.exe
tlkristiansen said:
Copy from "fastboot getvar all"
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-main: 4.19.401.8
version-misc: PVT SHIP S-ON
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__Y13
gencheckpt: 0
Click to expand...
Click to collapse
if you want to go back to 100% stock you will need to S-Off your phone,
so either
1- S-Off your phone, and follow my guide http://forum.xda-developers.com/showthread.php?t=2541082 (S-On is NOT recommended unless you're returning for warranty)
2- stay S-On and use a custom kernel, if you want stock Sense 5.5 (Android 4.4.2), you can try out ARHD 51.0 (very close to stock), or any other custom ROMs (or even stock ROM)
(check @ClydeB1's index thread in my signature for different ROMs)
3- get S-Off anyway, and flash whatever you want
If you decide to use my guide to go back to "out of the box", then post your "fastboot getvar all" in my thread and I'll let you know which files to use.
---------- Post added at 07:47 PM ---------- Previous post was at 07:45 PM ----------
tlkristiansen said:
Can it be one of those files I should use?
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13. 3227.06_10.27.1127.01_release_308001_signed_2_4.exe
Click to expand...
Click to collapse
Please do not use 1.20.401.1, it seems to be some kind of "pre-release" as it contains hboot 1.43, and the lowest ship version is supposed to be 1.44 AFAIK.
also using ruu.zip method has become my recommended method due to various issues.
Related
I have the following setup:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.16.3250.24
version-cpld: None
version-microp: None
version-main: 2.24.401.1
version-misc: PVT SHIP S-OFF
serialno: MEH
imei: MEH
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 4324mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
gencheckpt: 0
all: Done!
I have been reading around about HBOOT 1.54 and am wondering if anyone can give me a pros and cons list of going from 1.44 to 1.54 would be?
Thanks
incarceration said:
I have the following setup:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.16.3250.24
version-cpld: None
version-microp: None
version-main: 2.24.401.1
version-misc: PVT SHIP S-OFF
serialno: MEH
imei: MEH
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 4324mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
gencheckpt: 0
all: Done!
I have been reading around about HBOOT 1.54 and am wondering if anyone can give me a pros and cons list of going from 1.44 to 1.54 would be?
Thanks
Click to expand...
Click to collapse
you can change your hboot to 1.54 during upgrading your firmware to 2.24(it comes together)
you can find steps there:
http://forum.xda-developers.com/showthread.php?t=2365506
good luck
99piotrek said:
you can change your hboot to 1.54 during upgrading your firmware to 2.24(it comes together)
Click to expand...
Click to collapse
Thanks. But I know how to do it, I'm just wondering if there are any pros or cons of going to the 1.54 HBOOT from 1.44
incarceration said:
Thanks. But I know how to do it, I'm just wondering if there are any pros or cons of going to the 1.54 HBOOT from 1.44
Click to expand...
Click to collapse
I believe the 1.54 cannot be S-OFF'd
killman2659 said:
I believe the 1.54 cannot be S-OFF'd
Click to expand...
Click to collapse
Ah ok. That's what I was looking to confirm.
Do you know anything of an ENG BOOT? Any pros\cons for that?
incarceration said:
Thanks. But I know how to do it, I'm just wondering if there are any pros or cons of going to the 1.54 HBOOT from 1.44
Click to expand...
Click to collapse
The latest firmware brings updated touch screen drivers and a newer radio amongst other things and it's worth flashing for that alone as many feel it makes the device feel that little bit snappier. If you already have s-off then you won't lose that updating the firmware but if you haven't then you will not be able to s-off with hboot 1.54 at the moment so s-off before updating.
However available roms based on 2.24 will run ok on your existing firmware and the radios can be flashed independently so it's not essential to update if you're happy with your current setup.
Regarding the eng hboot I would advise against that as any modified hboot brings with it an increased risk of permanently bricking.
Most say that updating the firmware improves the device but as I say it's not essential at the moment so basically it's your choice.
incarceration said:
Do you know anything of an ENG BOOT? Any pros\cons for that?
Click to expand...
Click to collapse
There is no eng hboot for this phone, at least not one that will boot.
Sent from my Nexus 7 using Tapatalk HD
rider5512 said:
The latest firmware brings updated touch screen drivers and a newer radio amongst other things and it's worth flashing for that alone as many feel it makes the device feel that little bit snappier. If you already have s-off then you won't lose that updating the firmware but if you haven't then you will not be able to s-off with hboot 1.54 at the moment so s-off before updating.
However available roms based on 2.24 will run ok on your existing firmware and the radios can be flashed independently so it's not essential to update if you're happy with your current setup.
Regarding the eng hboot I would advise against that as any modified hboot brings with it an increased risk of permanently bricking.
Most say that updating the firmware improves the device but as I say it's not essential at the moment so basically it's your choice.
Click to expand...
Click to collapse
Thanks a lot for the clarification!
I flashed the "Combo" RUU from this thread (http://forum.xda-developers.com/showthread.php?t=2316726) and removed the HBOOT and Recovery images from them to avoid updating my HBOOT and overwriting my current custom recovery.
Does this still achieve what you noted in the first paragraph of your response? Do I have to update my HBOOT to achieve any other benefits? I guess I'm just trying to get at, what exactly does updating the HBOOT (the phone's bootloader) achieve?
Currently as I see it, I see the "firmware" as something other than the "HBOOT" (the other files within that same "Combo" RUU), correct?
incarceration said:
Thanks a lot for the clarification!
I flashed the "Combo" RUU from this thread (http://forum.xda-developers.com/showthread.php?t=2316726) and removed the HBOOT and Recovery images from them to avoid updating my HBOOT and overwriting my current custom recovery.
Does this still achieve what you noted in the first paragraph of your response? Do I have to update my HBOOT to achieve any other benefits? I guess I'm just trying to get at, what exactly does updating the HBOOT (the phone's bootloader) achieve?
Currently as I see it, I see the "firmware" as something other than the "HBOOT" (the other files within that same "Combo" RUU), correct?
Click to expand...
Click to collapse
I'm not sure to be honest as I always flash the full firmware package so I don't know if there will be any mismatch if the hboot has been left out.
If you are already s-off then I would flash the full 2.24 firmware package from the thread you quoted and then reflash your recovery in fastboot (no need to reboot into RUU mode) either CWM here or TWRP here following finally by flashing your rom
I can't open the link to download the firmware package for that post..... I used this 2.24 firmware package which I assume is the same as in the page you used but I would suggest this as I know it works fine
I stumbled across this when trying to find out what parts do what and are apart of what:
http://forum.xda-developers.com/showpost.php?p=43328416&postcount=3375
Apparently the HBOOT is part of the "firmware"
So again, if I update the HBOOT to 1.54 from 1.44, could I theoretically go back and forth between 1.54 and 1.44 whilst S-OFF?
EDIT: I just upgraded using the RUU from the link I posted, using the non-"combo" version.
I modified the android-info.txt to match my CID with the SuperCID I currently have, and I reinstalled my choice of recovery afterwards (TWRP, same version I had before.)
I'm now getting these 2 lines at the end of my 'getvar all' command via FASTBOOT:
commitno-bootloader: dirty-d16dc66985
hbootpreupdate: 11
what do those lines mean?
EDIT #2: I successfully switched back to HBOOT 1.44 whilst still S-OFF and got rid of those weird messages
C:\droidsdk\sdk\platform-tools>fastboot getvar all
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main: 2.24.401.1
version-misc: PVT SHIP S-OFF
serialno: nah bro
imei: nah bro
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 4233mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
gencheckpt: 0
all: Done!
finished. total time: 2.771s
here's a random, somewhat related question from left field
incarceration said:
I stumbled across this when trying to find out what parts do what and are apart of what:
http://forum.xda-developers.com/showpost.php?p=43328416&postcount=3375
Apparently the HBOOT is part of the "firmware"
So again, if I update the HBOOT to 1.54 from 1.44, could I theoretically go back and forth between 1.54 and 1.44 whilst S-OFF?
EDIT: I just upgraded using the RUU from the link I posted, using the non-"combo" version.
I modified the android-info.txt to match my CID with the SuperCID I currently have, and I reinstalled my choice of recovery afterwards (TWRP, same version I had before.)
I'm now getting these 2 lines at the end of my 'getvar all' command via FASTBOOT:
commitno-bootloader: dirty-d16dc66985
hbootpreupdate: 11
what do those lines mean?
EDIT #2: I successfully switched back to HBOOT 1.44 whilst still S-OFF and got rid of those weird messages
C:\droidsdk\sdk\platform-tools>fastboot getvar all
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main: 2.24.401.1
version-misc: PVT SHIP S-OFF
serialno: nah bro
imei: nah bro
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 4233mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
gencheckpt: 0
all: Done!
finished. total time: 2.771s
Click to expand...
Click to collapse
I have the 64 gb dev edition, non-carrier branded and using TMO network. Already updated to 2.24 with AndroidRevo12 and didn't have S-Off first, so I gather there's no going there for now w/o going back to pre-2.24. But the whole reason I started down that road was cuz I thought I needed S-Off to flash radio by itself. I just want the new radio for the LTE bump since I seem to have such good LTE coverage at home and work.
If I don't need S-off to flash radio as "that can be done independently," then can you offer any possible reasons why I'm getting a signature verify fail when trying to push first revone (via adb), then later (once I gave up on S-off) while trying to flash the new radio.img fia fastboot?
(radio img is the new TMOUS 4A.17.3250.20_10.440.1150.04L)
Fastboot and adb seem to be fine otherwise, and phone settings are all proper (debug/etc). Bootloader obviously unlocked, etc...HBOOT is 1.44.
Good morning people
Let me first get my story done
I had a unlocked htc one with maximusHD on, But I wanted to go back to complete Stock so i ran the RUU. I'm now on android 4.1.2 (the version i had when i bought the phone) and im not recieving any OTA updates (ive had one before when the phone was still stock to android 4.2.2 or 4.2.1 not completely sure anymore)
Below ill post some details of the version ive got now on my phone
android version: 4.1.2
software number: 1.20.401.1
kernel version 3.4.10-gc81fffd
baseband version: 4a.13.3227.06_10.27.1127.01L
build number: 1.20.401.1 CL156395
Fastboot Getvar all:
version: 0.5
version-bootloader: 1.43.0000
version-baseband: 4A.13.3227.06
version-cpld: None
version-microp: None
version-main: 1.20.401.1
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__E11
battery-status: good
battery-voltage: 4286mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
name of the RUU i installed
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4 (downloaded from htc1guru)
I hope you people can help me to recieve OTA updates again on my phone
If i havent posted something above (i think i posted all relevant things) pls give me a shout and ill post them
Regards
frayful
frayful said:
Good morning people
Let me first get my story done
I had a unlocked htc one with maximusHD on, But I wanted to go back to complete Stock so i ran the RUU. I'm now on android 4.1.2 (the version i had when i bought the phone) and im not recieving any OTA updates (ive had one before when the phone was still stock to android 4.2.2 or 4.2.1 not completely sure anymore)
Below ill post some details of the version ive got now on my phone
android version: 4.1.2
software number: 1.20.401.1
kernel version 3.4.10-gc81fffd
baseband version: 4a.13.3227.06_10.27.1127.01L
build number: 1.20.401.1 CL156395
Fastboot Getvar all:
version: 0.5
version-bootloader: 1.43.0000
version-baseband: 4A.13.3227.06
version-cpld: None
version-microp: None
version-main: 1.20.401.1
version-misc: PVT SHIP S-ON
serialno: FAxxxxxxxxxxxxxxxxxxxxx
imei: 3xxxxxxxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__E11
battery-status: good
battery-voltage: 4286mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
name of the RUU i installed
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4 (downloaded from htc1guru)
I hope you people can help me to recieve OTA updates again on my phone
If i havent posted something above (i think i posted all relevant things) pls give me a shout and ill post them
Regards
frayful
Click to expand...
Click to collapse
hey mate, edit your post and remove IMEI and serial number, we don't need to see those.
Anyway, most of the details you showed look just fine, except hboot 1.43 As far as I know the lowest hboot for the One is 1.44
You may want to try this RUU instead (slightly newer, but still for you MID & CID): http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
Remember that since you're S-On this (and any OTA after) is a one way trip, ie you can upgrade, but cannot downgrade.
And of course you're bootloader has to be locked/relocked to be able to run the RUU.
nkk71 said:
hey mate, edit your post and remove IMEI and serial number, we don't need to see those.
Anyway, most of the details you showed look just fine, except hboot 1.43 As far as I know the lowest hboot for the One is 1.44
You may want to try this RUU instead (slightly newer, but still for you MID & CID):
Remember that since you're S-On this (and any OTA after) is a one way trip, ie you can upgrade, but cannot downgrade.
And of course you're bootloader has to be locked/relocked to be able to run the RUU.
Click to expand...
Click to collapse
Evening i tried the RUU that you suggested
still hboot 1.43 and no OTA updates
anymore ideas?
regards,
frayful
Flash hboot 1.44 and then try the 1.28.401.7 RUU. That's how I got my device back to stock 4.1.2 and then got 4 OTA updates
1. 1.29.401.1
2. 2.24.401.1
3. 2.24.401.8
4. 3.62.401.1
Sent from my HTC One using Tapatalk
Ivanovic said:
Flash hboot 1.44 and then try the 1.28.401.7 RUU. That's how I got my device back to stock 4.1.2 and then got 4 OTA updates
1. 1.29.401.1
2. 2.24.401.1
3. 2.24.401.8
4. 3.62.401.1
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
i am trying to do that. I tried flashing a hboot 1.44 but i flash it it says okay i reboot back to bootloader it still says hboot 1.43
any thoughts
regards,
Frayful
How do you flash it? Fastboot flash zip filename.zip?
You 've go to do this twice
Sent from my HTC One using Tapatalk
Ivanovic said:
How do you flash it? Fastboot flash zip filename.zip?
You 've go to do this twice
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
i did fastboot oem rebootRUU
fastboot flash zip filename twice
fastboot reboot-bootloader
still says 1.43
But im going to look for another hboot to be sure
regards
If you want I can upload the file I used
Sent from my HTC One using Tapatalk
Ivanovic said:
If you want I can upload the file I used
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
that would be very helpfull bud
(btw cheers for the help and quick replies so far)
regards,
frayful
Here you are http://www60.zippyshare.com/v/66756398/file.html
I downgraded from 1.55 to 1.44 yesterday just fine
Ivanovic said:
Here you are http://www60.zippyshare.com/v/66756398/file.html
I downgraded from 1.55 to 1.44 yesterday just fine
Click to expand...
Click to collapse
cheers man that hboot worked like a charm
im having dinner now but ill try the OTA after my dinner and ill get back to you if it worked or not
regards,
frayful
Just use the 1.28.401.7 RUU and you 'll be fine! Enjoy your dinner
Sent from my HTC One using Tapatalk
Ivanovic said:
Just use the 1.28.401.7 RUU and you 'll be fine! Enjoy your dinner
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
yup works bud downloading the first ota update as we speak
u rock!
regards,
frayful
Hi guys, byesterday I did full backing to stock using this guide (http://forum.xda-developers.com/showthread.php?t=2541082) and everything works perfect (Locked, S-On, removed tamperer...) except thing that I not receiving any OTA.
I checked my getvar all and saw that my hboot is 1.43.
Here is mu getvar all:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.43.0000
(bootloader) version-baseband: 4A.13.3227.06
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.20.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA********
(bootloader) imei: 35************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4311mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.048s
I have 2 questions: Can I upgrade hboot (1.43) to 1.44 and run correct RUU with Locked Bootloader and S-on or I have to unlock bootloader again, root phone get s-off...?
And if i need to do all of this again, can you provide me the easiest way (links)?
I need to get back my Htc ONE to RMA (camera issue)..
Thanks!!
djmeex said:
Hi guys, byesterday I did full backing to stock using this guide (http://forum.xda-developers.com/showthread.php?t=2541082) and everything works perfect (Locked, S-On, removed tamperer...) except thing that I not receiving any OTA.
Thanks!!
Click to expand...
Click to collapse
Answered you in my thread.
cheers
Hi i want to s-off my htc one m7 now have cyanogen mod rom it's bootloader unlocked and root-ed i want to install google play edition but i'dont have s-off and how to change cid because with fastboot not working. Thank you for help I have hboot 1.57
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.16.75.5
version-misc: PVT SHIP S-ON
serialno: xxxxxxxxxxxx
imei: xxxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: ORANG309
battery-status: good
battery-voltage: 4315mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
This is the only solution for you http://theroot.ninja/
But you must install a stock Rom or near stock something like MaximusHD or ARHD. Install them without changing the kernel.
It will cost you 25$.
If you don't wanna pay for sunshine S Off
ARHD + bulletproof kernel + firewater
yatindroid said:
If you don't wanna pay for sunshine S Off
ARHD + bulletproof kernel + firewater
Click to expand...
Click to collapse
Firewater from were?
Have you read later the Firewater webpage? http://firewater-soff.com/
yatindroid said:
If you don't wanna pay for sunshine S Off
ARHD + bulletproof kernel + firewater
Click to expand...
Click to collapse
cyrusct82 said:
Firewater from were?
Have you read later the Firewater webpage? http://firewater-soff.com/
Click to expand...
Click to collapse
Firewater is discontinued, the only option available for hboot 1.57 is sunshine.
Anyway the OP ( @MariusAdonis ) already knows that and how to convert to GPE, I spent some time explaining him in this thread
so consider this one as a duplicated thread. Well its the 3rd thread asking how to install GPE, another one here
---------- Post added at 12:07 PM ---------- Previous post was at 11:59 AM ----------
MariusAdonis said:
(...)how to change cid because with fastboot not working(...)
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.16.75.5
version-misc: PVT SHIP S-ON
serialno: xxxxxxxxxxxx
imei: xxxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: ORANG309
battery-status: good
battery-voltage: 4315mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
So fastboot isn't working but "fastboot getvar all" is working ?
I have picture with the problem..
alray said:
Firewater is discontinued, the only option available for hboot 1.57 is sunshine.
Anyway the OP ( @MariusAdonis ) already knows that and how to convert to GPE, I spent some time explaining him in this thread
so consider this one as a duplicated thread. Well its the 3rd thread asking how to install GPE, another one here
---------- Post added at 12:07 PM ---------- Previous post was at 11:59 AM ----------
So fastboot isn't working but "fastboot getvar all" is working ?
Click to expand...
Click to collapse
Here it's the problem...i writed fastboot oem writecid AN IT'S SHOW ME ERROR..i have picture to show you
MariusAdonis said:
Here it's the problem...i writed fastboot oem writecid AN IT'S SHOW ME ERROR..i have picture to show you
Click to expand...
Click to collapse
Because you need s-off first. you can't change CID with s-on...
And if your intention is to use the GPE version then use GOOGL001
So like I said in your other thread
achieve s-off
change cid to GOOGL001 and mid to PN0712000
flash the GPE RUU
alray said:
To install the GPE version you will first need to s-off using sunshine
then change your MID to PN0712000, your CID to GOOGL01 and flash the GPE RUU (can be found in the dev sub forum).
.
Click to expand...
Click to collapse
just use Sunshine. it works awesome. I've used it for a few 1.57 HTC ones. I think its really worth the lack of aggravation that it provides.
Guys please help this is urgent.
I followed the instructions on a website and relocked my bootloader. But then when it came the time to run the RUU,Ii had downloaded the wrong RUU file. I have been on the search for the correct one but I cant find it and so i am stuck in fastboot (I cant even boot to recovery).
I am on an international m7 variant and here is the info. from the fastboot screen:
HBOOT-1.56.0000
RADIO-4A.21.3263.04
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Please help as this is urgent (and I am a beginner-ish in this as i used to own a Samsung device).
Thanks in advance.:good:
mousaalwaraki said:
Guys please help this is urgent.
I followed the instructions on a website and relocked my bootloader. But then when it came the time to run the RUU,Ii had downloaded the wrong RUU file. I have been on the search for the correct one but I cant find it and so i am stuck in fastboot (I cant even boot to recovery).
I am on an international m7 variant and here is the info. from the fastboot screen:
HBOOT-1.56.0000
RADIO-4A.21.3263.04
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Please help as this is urgent (and I am a beginner-ish in this as i used to own a Samsung device).
Thanks in advance.:good:
Click to expand...
Click to collapse
post the output of "fastboot getvar all" minus your imei and serialno
and remember to post in the "Q&A" sub forum next time, not in general.
alray said:
post the output of "fastboot getvar all" minus your imei and serialno
and remember to post in the "Q&A" sub forum next time, not in general.
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__J15
battery-status: good
battery-voltage: 3844mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-c6bbb6d4
hbootpreupdate: 11
gencheckpt: 0
Here it is and sorry as i said i am a beginner
mousaalwaraki said:
I am on an international m7 variant and here is the info. from the fastboot screen:
Click to expand...
Click to collapse
mousaalwaraki said:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__J15
battery-status: good
battery-voltage: 3844mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-c6bbb6d4
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
This is no the international variant btw. International variant is M7_UL PN0710000 not M7_U PN0711000.
There is only one RUU for this variant but its an old version and will require S-OFF to be flashed.
You have two option: re-unlock your bootloader and flash a custom rom
or
re-unlock your bootloader, flash a custom rom, achieve s-off and flash this RUU: http://www.htc1guru.com/dld/ruu-zip...0-01_release_311663_signed_2_4_decrypted-zip/
I have tried to achieve s-off for a while now using rumrunner but it never works, there is always some kind of different error.
mousaalwaraki said:
I have tried to achieve s-off for a while now using rumrunner but it never works, there is always some kind of different error.
Click to expand...
Click to collapse
your hboot is to high for RumRunner you have to Pay for Sunshine s-off
clsA said:
your hboot is to high for RumRunner you have to Pay for Sunshine s-off
Click to expand...
Click to collapse
Is there no other way than sunshine. Because i have heard its $25 and thats a bit too high for me tbh.
mousaalwaraki said:
Is there no other way than sunshine. Because i have heard its $25 and thats a bit too high for me tbh.
Click to expand...
Click to collapse
No thats it .. and it's well worth it. Just so you know All the HTC One M8 have to use this and everyone will tell you it is worth it.
clsA said:
No thats it .. and it's well worth it. Just so you know All the HTC One M8 have to use this and everyone will tell you it is worth it.
Click to expand...
Click to collapse
Oh well thanks guys i would try my best to get it i guess.
i have m 7 developer unlocked s-on hboot 1.44 can i update firmware my is 4A.18.3263.15 :good:
khaleddante said:
i have m 7 developer unlocked s-on hboot 1.44 can i update firmware my is 4A.18.3263.15 :good:
Click to expand...
Click to collapse
Post your "fastboot getvar all"
4A.18.3263.15 isn't relevant, it's your radio version only and a few different phone versions are using the same radios.
What is your main goal? You want to update your firmware only? To flash a custom rom? Or you want to be on the latest stock version?
About hboot 1.44
alray said:
Post your "fastboot getvar all"
4A.18.3263.15 isn't relevant, it's your radio version only and a few different phone versions are using the same radios.
What is your main goal? You want to update your firmware only? To flash a custom rom? Or you want to be on the latest stock version?
Click to expand...
Click to collapse
Main goal is to update hboot my is 1.44 i want 1.6x
I have s-on
khaleddante said:
Main goal is to update hboot my is 1.44 i want 1.6x
I have s-on
Click to expand...
Click to collapse
fastboot getvar all
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.18.3263.15
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno:xxxxxxxxxxxxxx
imei: xxxxxxxxxxxx,xxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0713000
cidnum: T-MOB010
battery-status: good
battery-voltage: 3934mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
Sent from my HTC One using XDA-Developers mobile app