Database Develop

[Q] Finding the right RUU file for HTC ONE GSM

Hi all,
I've just moved from iPhone to a HTC ONE GSM last week and then I root it and installed Cyanogenmod.
But now I will back to the original setup, can anyone help me find the right RUU file, I've searched for it, but can't figure out what name it should have and where I can find it.
Here is some data for my phone:
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
I'm from Denmark, the phone is a GSM and it's not attached to a supplier.
Hope for your help, regards
Thomas

tlkristiansen said:
Hi all,
I've just moved from iPhone to a HTC ONE GSM last week and then I root it and installed Cyanogenmod.
But now I will back to the original setup, can anyone help me find the right RUU file, I've searched for it, but can't figure out what name it should have and where I can find it.
Here is some data for my phone:
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
I'm from Denmark, the phone is a GSM and it's not attached to a supplier.
Hope for your help, regards
Thomas
Click to expand...
Click to collapse
if you still have the fastboot file from when you unlocked the bootloader
give me the results from fastboot getvar all (-SN and IEMI) and I'll help you look

clsA said:
if you still have the fastboot file from when you unlocked the bootloader
give me the results from fastboot getvar all (-SN and IEMI) and I'll help you look
Click to expand...
Click to collapse
Hi,
I am quite new to android and was unfortunately did not take back up, used the cyanogenmod installer to root it.
Is there any other way?

tlkristiansen said:
Hi,
I am quite new to android and was unfortunately did not take back up, used the cyanogenmod installer to root it.
Is there any other way?
Click to expand...
Click to collapse
as mentioned, you still need to post a "fastboot getvar all" (excluding IMEI and s/n)

Copy from "fastboot getvar all"
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-microp: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4076mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0

Can it be one of those files I should use?
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13. 3227.06_10.27.1127.01_release_308001_signed_2_4.exe

tlkristiansen said:
Copy from "fastboot getvar all"
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-main: 4.19.401.8
version-misc: PVT SHIP S-ON
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__Y13
gencheckpt: 0
Click to expand...
Click to collapse
if you want to go back to 100% stock you will need to S-Off your phone,
so either
1- S-Off your phone, and follow my guide http://forum.xda-developers.com/showthread.php?t=2541082 (S-On is NOT recommended unless you're returning for warranty)
2- stay S-On and use a custom kernel, if you want stock Sense 5.5 (Android 4.4.2), you can try out ARHD 51.0 (very close to stock), or any other custom ROMs (or even stock ROM)
(check @ClydeB1's index thread in my signature for different ROMs)
3- get S-Off anyway, and flash whatever you want
If you decide to use my guide to go back to "out of the box", then post your "fastboot getvar all" in my thread and I'll let you know which files to use.
---------- Post added at 07:47 PM ---------- Previous post was at 07:45 PM ----------
tlkristiansen said:
Can it be one of those files I should use?
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13. 3227.06_10.27.1127.01_release_308001_signed_2_4.exe
Click to expand...
Click to collapse
Please do not use 1.20.401.1, it seems to be some kind of "pre-release" as it contains hboot 1.43, and the lowest ship version is supposed to be 1.44 AFAIK.
also using ruu.zip method has become my recommended method due to various issues.

Some help with s-off

I have flashed my One with CMinstaller, but it's still s-on.
Flashed from CM to Android Revolution HD 53.0 and tried to get s-off with Rumrunner, but no luck.
Pouring 8 times "Wait 30 seconds, power on device, pray, run rumrunner again."
So no luck, what to do?

Ronnymes said:
I have flashed my One with CMinstaller, but it's still s-on.
Flashed from CM to Android Revolution HD 53.0 and tried to get s-off with Rumrunner, but no luck.
Pouring 8 times "Wait 30 seconds, power on device, pray, run rumrunner again."
So no luck, what to do?
Click to expand...
Click to collapse
Use the arhd version that match your firmware version, You can find with a ''fastboot gatvar all''.
what is your hboot version?

alray said:
Use the arhd version that match your firmware version, You can find with a ''fastboot gatvar all''.
what is your hboot version?
Click to expand...
Click to collapse
fastboot getvar all
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.25.3263.21
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: SH00000000
imei: 000000000000
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__E11
battery-status: good
battery-voltage: 4304mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0

Ronnymes said:
fastboot getvar all
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.25.3263.21
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: SH00000000
imei: 000000000000
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__E11
battery-status: good
battery-voltage: 4304mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Having a major problem myself, support over for firewater/rumrunner said some devices are just different and they are trying to get one to test

alray said:
Use the arhd version that match your firmware version, You can find with a ''fastboot gatvar all''.
what is your hboot version?
Click to expand...
Click to collapse
The arhd version?

Ronnymes said:
The arhd version?
Click to expand...
Click to collapse
you are on hboot 1.56, many user reported to be unable to s-off on that verson. Refer to the ''hboot 1.56 s-off'' thread in the Q&A

alray said:
you are on hboot 1.56, many user reported to be unable to s-off on that verson. Refer to the ''hboot 1.56 s-off'' thread in the Q&A
Click to expand...
Click to collapse
So I can't revert to stock without the tamperd logo..
Thats f#ckt up, but thnx for helping me

Soft-brick. Need help!

So I had my m7 running fine, rooted and running a custom ROM. I got the M8 and so I wanted to return it to stock so I could sell it. Im now regretting that because I can't get it to do anything now. I've reflashed various ROMs (stock and custom Sense ROMs) without any success. For awhile I could get the stock rom (or what i believe was stock) to boot but the touch screen wouldn't work so it was worthless. Now I only get it to set on the HTC logo with the white background. I've left it for over 30 minutes and nothing happens. I'm a semi-noob but this one has be stumped. Any help is greatly appreciated.
Here is what my bootloader looks like:
Tampered
Relocked
M7_WLS PVT SHIP S-On RH
HBOOT-1.55.0000
RADIO-1.00.20.0913_3
OpenDSP-v31.120.274.0617
eMMC-boot 2048MB
Oct 1 2013

biged87 said:
So I had my m7 running fine, rooted and running a custom ROM. I got the M8 and so I wanted to return it to stock so I could sell it. Im now regretting that because I can't get it to do anything now. I've reflashed various ROMs (stock and custom Sense ROMs) without any success. For awhile I could get the stock rom (or what i believe was stock) to boot but the touch screen wouldn't work so it was worthless. Now I only get it to set on the HTC logo with the white background. I've left it for over 30 minutes and nothing happens. I'm a semi-noob but this one has be stumped. Any help is greatly appreciated.
Here is what my bootloader looks like:
Tampered
Relocked
M7_WLS PVT SHIP S-On RH
HBOOT-1.55.0000
RADIO-1.00.20.0913_3
OpenDSP-v31.120.274.0617
eMMC-boot 2048MB
Oct 1 2013
Click to expand...
Click to collapse
Your phone is the (M7_WLS CDMA) Sprint variant. You are not posting in the right forum, so I guess you are flashing roms/recoveries for the wrong variant (M7_UL GSM)

alray said:
Your phone is the (M7_WLS CDMA) Sprint variant. You are not posting in the right forum, so I guess you are flashing roms/recoveries for the wrong variant (M7_UL GSM)
Click to expand...
Click to collapse
i am using the Sprint variant recovery and the roms have been for Sprint. i posted in this forum because i thought it was the right place to ask for help. what forum do you recommend?
Thanks!

biged87 said:
i am using the Sprint variant recovery and the roms have been for Sprint. i posted in this forum because i thought it was the right place to ask for help. what forum do you recommend?
Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/sprint-htc-one/help
What rom version and what is your recovery version?
can you post a complete "fastboot getvar all" except the imei, meid and serialno

alray said:
http://forum.xda-developers.com/sprint-htc-one/help
What rom version and what is your recovery version?
can you post a complete "fastboot getvar all" except the imei, meid and serialno
Click to expand...
Click to collapse
Here is what I have from Get Var. I am thinking i need to update my hboot to 1.56 so I use OMJ's RUU ( http://forum.xda-developers.com/showthread.php?t=2658910 ). I try it now and it crashes at 4%.
C:\adbtools\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.00.20.0913_3
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4294mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-005bf6a40e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.109s
C:\adbtools\sdk\platform-tools>

biged87 said:
Here is what I have from Get Var. I am thinking i need to update my hboot to 1.56 so I use OMJ's RUU ( http://forum.xda-developers.com/showthread.php?t=2658910 ). I try it now and it crashes at 4%.
C:\adbtools\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.00.20.0913_3
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4294mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-005bf6a40e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.109s
C:\adbtools\sdk\platform-tools>
Click to expand...
Click to collapse
if your phone is s-on make sure to use the encrypted/signed version , not the decrypted one. bootloader must be locked or re-locked.

alray said:
if your phone is s-on make sure to use the encrypted/signed version , not the decrypted one. bootloader must be locked or re-locked.
Click to expand...
Click to collapse
Yeah i'm using the encrypted one as far as i can tell (Sprint_HTC_One_m7wls_4.06.651.4_RUU.zip)
I am also relocked as you can see in the GET VAR screen. Maybe it has something to do with recovery or hboot. I don't know.

biged87 said:
I am also relocked as you can see in the GET VAR screen.
Click to expand...
Click to collapse
no, locked/unlocked/relocked status is not included in a getvar, its only displayed on the bootloader screen

alray said:
no, locked/unlocked/relocked status is not included in a getvar, its only displayed on the bootloader screen
Click to expand...
Click to collapse
You're right, my bad. It is in the OP though and is relocked. Thanks!

Might have made it worse.
I figured i should update my hboot from 1.55 to 1.56. So here is my current booloader screen.
Tampered
Relocked
M7_WLS PVT SHIP S-ON RH
HBOOT-1.56.0000
Radio-1.00.20.0913_3
OpenDSP-v31.120.274.0617
OS- 4.06.651.4
The OS line is new... I tried to then flash the Sprint_HTC_One_m7wls_4.06.651.4_RUU.zip ROM using OMJ's instructions and it just crashes at 4% and says Error 155: UNKNOWN ERROR, like before. I appreciate any help.

biged87 said:
Might have made it worse.
I figured i should update my hboot from 1.55 to 1.56. So here is my current booloader screen.
Tampered
Relocked
M7_WLS PVT SHIP S-ON RH
HBOOT-1.56.0000
Radio-1.00.20.0913_3
OpenDSP-v31.120.274.0617
OS- (4.06.51.40)
That OS line is in Red and wan't there before. I tried to then flash the Sprint_HTC_One_m7wls_4.06.651.4_RUU.zip ROM using OMJ's instructions and it just crashes at 4% like before. I appreciate any help.
Click to expand...
Click to collapse
did you download the firmware file and flash it twice ?

Seanie280672 said:
did you download the firmware file and flash it twice ?
Click to expand...
Click to collapse
Yes. typed the flash command twice.
Technically the very first time i only did it once and then i watched the video and saw him do it twice. so yeah i did it twice.

biged87 said:
Yes. typed the flash command twice.
Technically the very first time i only did it once and then i watched the video and saw him do it twice. so yeah i did it twice.
Click to expand...
Click to collapse
so you got the successful message at the end, then reboot your phone to fastboot USB mode and run the ruu

Seanie280672 said:
so you got the successful message at the end, then reboot your phone to fastboot mode and run the ruu, does it give you an error code when it fails ?
Click to expand...
Click to collapse
Yes i ran the reboot command and it went to the htc screen and i powered it down and went back into fastboot-usb and ran the RUU. It stops at 4% and says Error 155 (unknown). Im using Windows 7. Thanks for your continued help.

biged87 said:
Yes i ran the reboot command and it went to the htc screen and i powered it down and went back into fastboot-usb and ran the RUU. It stops at 4% and says Error 155 (unknown). Im using Windows 7. Thanks for your continued help.
Click to expand...
Click to collapse
well this is what the error means:
--------------------------------------------------------------------------------
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
PLEASE READ PAGE 5 AND 6 FROM THE THREAD YOU LINKED WHERE YOU ARE GETTING THE FILES FROM.

Help me with s-off please

Hi i want to s-off my htc one m7 now have cyanogen mod rom it's bootloader unlocked and root-ed i want to install google play edition but i'dont have s-off and how to change cid because with fastboot not working. Thank you for help I have hboot 1.57
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.16.75.5
version-misc: PVT SHIP S-ON
serialno: xxxxxxxxxxxx
imei: xxxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: ORANG309
battery-status: good
battery-voltage: 4315mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0

This is the only solution for you http://theroot.ninja/
But you must install a stock Rom or near stock something like MaximusHD or ARHD. Install them without changing the kernel.
It will cost you 25$.

If you don't wanna pay for sunshine S Off
ARHD + bulletproof kernel + firewater

yatindroid said:
If you don't wanna pay for sunshine S Off
ARHD + bulletproof kernel + firewater
Click to expand...
Click to collapse
Firewater from were?
Have you read later the Firewater webpage? http://firewater-soff.com/

yatindroid said:
If you don't wanna pay for sunshine S Off
ARHD + bulletproof kernel + firewater
Click to expand...
Click to collapse
cyrusct82 said:
Firewater from were?
Have you read later the Firewater webpage? http://firewater-soff.com/
Click to expand...
Click to collapse
Firewater is discontinued, the only option available for hboot 1.57 is sunshine.
Anyway the OP ( @MariusAdonis ) already knows that and how to convert to GPE, I spent some time explaining him in this thread
so consider this one as a duplicated thread. Well its the 3rd thread asking how to install GPE, another one here
---------- Post added at 12:07 PM ---------- Previous post was at 11:59 AM ----------
MariusAdonis said:
(...)how to change cid because with fastboot not working(...)
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.16.75.5
version-misc: PVT SHIP S-ON
serialno: xxxxxxxxxxxx
imei: xxxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: ORANG309
battery-status: good
battery-voltage: 4315mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
So fastboot isn't working but "fastboot getvar all" is working ?

I have picture with the problem..
alray said:
Firewater is discontinued, the only option available for hboot 1.57 is sunshine.
Anyway the OP ( @MariusAdonis ) already knows that and how to convert to GPE, I spent some time explaining him in this thread
so consider this one as a duplicated thread. Well its the 3rd thread asking how to install GPE, another one here
---------- Post added at 12:07 PM ---------- Previous post was at 11:59 AM ----------
So fastboot isn't working but "fastboot getvar all" is working ?
Click to expand...
Click to collapse
Here it's the problem...i writed fastboot oem writecid AN IT'S SHOW ME ERROR..i have picture to show you

MariusAdonis said:
Here it's the problem...i writed fastboot oem writecid AN IT'S SHOW ME ERROR..i have picture to show you
Click to expand...
Click to collapse
Because you need s-off first. you can't change CID with s-on...
And if your intention is to use the GPE version then use GOOGL001
So like I said in your other thread
achieve s-off
change cid to GOOGL001 and mid to PN0712000
flash the GPE RUU
alray said:
To install the GPE version you will first need to s-off using sunshine
then change your MID to PN0712000, your CID to GOOGL01 and flash the GPE RUU (can be found in the dev sub forum).
.
Click to expand...
Click to collapse

just use Sunshine. it works awesome. I've used it for a few 1.57 HTC ones. I think its really worth the lack of aggravation that it provides.

Help about HTC Version ?

Hi guys, so i have an HTC M7 801n, (which work with all carriers), so is this the Unlocked version ? if not which version it is ?

Xhemal1325 said:
Hi guys, so i have an HTC M7 801n, (which work with all carriers), so is this the Unlocked version ? if not which version it is ?
Click to expand...
Click to collapse
I have a pretty good memory
http://forum.xda-developers.com/htc-one/help/custom-roms-htc-one-801n-t2985727
answer my question at post #6

alray said:
I have a pretty good memory
http://forum.xda-developers.com/htc-one/help/custom-roms-htc-one-801n-t2985727
answer my question at post #6
Click to expand...
Click to collapse
ok, now you can help me ? Take a look
is this the info you need, or i have done it wrong !!
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.29.3218.08
version-cpld: None
version-microp: None
version-main: 6.09.401.12
version-misc: PVT SHIP S-OFF
serialno: -------------
imei: ---------------
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN071****
cidnum: 11111111
battery-status: good
battery-voltage: 4056mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0

Xhemal1325 said:
ok, now you can help me ? Take a look
is this the info you need, or i have done it wrong !!
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.29.3218.08
version-cpld: None
version-microp: None
version-main: 6.09.401.12
version-misc: PVT SHIP S-OFF
serialno: -------------
imei: ---------------
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN071****
cidnum: 11111111
battery-status: good
battery-voltage: 4056mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
well the phone is s-off so in theory, every info we can see from this getvar could have been modified.
M7_UL is the pretty standard international model with LTE
6.09.401.12 is the latest European WWE unlocked version software
Supercid
and a strange MID that some of us call superMID.
What do you want to do exactly? Your phone is s-off, supercid so you can flash everything you want...

alray said:
well the phone is s-off so in theory, every info we can see from this getvar could have been modified.
M7_UL is the pretty standard international model with LTE
6.09.401.12 is the latest European WWE unlocked version software
Supercid
and a strange MID that some of us call superMID.
What do you want to do exactly? Your phone is s-off, supercid so you can flash everything you want...
Click to expand...
Click to collapse
ok, thanks man, i just wanted to know is this : Unlocked version, or devolopment version, or any other version ?

Xhemal1325 said:
ok, thanks man, i just wanted to know is this : Unlocked version, or devolopment version, or any other version ?
Click to expand...
Click to collapse
Looks like an European WWE unlocked version but its impossible to tell with the getvar. Maybe the phone has been converted from another version. Only way to know original CID and MID is to dump the MFG partition so we can take a look at it with HxD editor.

alray said:
Looks like an European WWE unlocked version but its impossible to tell with the getvar. Maybe the phone has been converted from another version. Only way to know original CID and MID is to dump the MFG partition so we can take a look at it with HxD editor.
Click to expand...
Click to collapse
Thank you for your time sir,